/// <summary>
/// Sets all the properties.
/// </summary>
/// <param name="seq">Command sequence ID.</param>
/// <param name="id">Command ID (see <see cref="Diacom.AltiGen.ALPCmdID">ALPCmdID</see> enumeration).</param>
/// <param name="sender">Command sender line PAD.</param>
/// <param name="status">Command status.</param>
public void Set(int seq, ALPCmdID id, object sender, ALPCmdStatus status)
{
ID = id;
SenderLine = sender;
SequenceID = seq;
Status = status;
}
/// <summary>
/// Processes all events.
/// </summary>
/// <param name="altiEvent">Block of data to process.</param>
/// <returns>An object whith the event.</returns>
protected override void ProcessEvent(AltiLinkPlus.ALPEvent altiEvent)
{
// Getting information only if event is for our SP control line.
TraceOut.Put("AltiGenSP::ProcessEvent LocId=" + altiEvent.LocationId + " EventId=" + ((ALPEvID)altiEvent.CommandId).ToString());
if (altiEvent.LocationId == ControlLocationID)
{
switch ((ALPEvID)(altiEvent.CommandId))
{
// Event Ev.Ring.
case ALPEvID.APC_CALLPRESENT:
{
CallInfo rInfo = new CallInfo(((AltiLinkPlus.ALPParameter)(altiEvent[0])));
ALPLine _line = this[rInfo.lineID];
if (!_line.IsUnderAPCControl)
{
AltiLinkPlus.ALPCommand ac = new AltiLinkPlus.ALPCommand(ControlLocationID, (int)(ALPCmdID.APC_GET_DATA));
ac[0] = new AltiLinkPlus.ALPParameter(rInfo.lineID);
ac[1] = new AltiLinkPlus.ALPParameter((int)Diacom.AltiGen.ALPInfoType.APC_DATATYPE_USER);
ac[2] = new AltiLinkPlus.ALPParameter(0);
StoredRingInfo.Add(ac.SequenceId, rInfo);
base.SendALPCommand(ac);
_line.InfoState = ALPLine.CallInfoState.CALL_INFO_REQ_SENT;
_line.Digits.Clear();
TraceOut.Put("AltiGenSP::APC_CALLPRESENT from :" + rInfo.callerID + " - requested extra info");
}
break;
}
// Event Ev.RingBack.
case ALPEvID.APC_RINGBACK:
{
CallInfo rbInfo = new CallInfo(((AltiLinkPlus.ALPParameter)(altiEvent[0])));
// Getting current line from hashtable.
ALPLine _line = this[rbInfo.lineID];
if (_line != null)
{
// Updating line information.
if (_line.SPLineInfo.Type == "T")
{
_line.SPLineInfo.CalledNumber = _line.SPLineInfo.AccessCode + rbInfo.calleeID;
_line.SPLineInfo.CalledName = rbInfo.calleeName;
}
else
{
_line.SPLineInfo.CalledNumber = rbInfo.callerID;
_line.SPLineInfo.CalledName = rbInfo.callerName;
}
_line.SPLineInfo.DNISNumber = rbInfo.DNISID;
_line.SPLineInfo.DNISName = rbInfo.DNISName;
_line.SPLineInfo.CIDNumber = rbInfo.ANIID;
_line.SPLineInfo.CIDName = rbInfo.ANIName;
_line.SPLineInfo.DIDNumber = rbInfo.calleeID;
_line.SPLineInfo.DIDName = rbInfo.calleeName;
TraceOut.Put("AltiGenSP::APC_RINGBACK");
if (!_line.IsUnderAPCControl)
{
this.SendSpEvent(new Ev.RingBack(rbInfo.lineID, (SPLine)_line.SPLineInfo.Clone()));
}
}
break;
}
// Event Ev.Connect.
case ALPEvID.STCHG:
{
// Getting parameters.
ALPLineState state = ((ALPLineState)(altiEvent[0].ReadInt32()));
int lineID = altiEvent[1].ReadInt32();
// Getting current line from hashtable.
ALPLine _line = this[lineID];
TraceOut.Put("AltiGenSP::Line State=" + ((ALPLineState)state).ToString());
if ((_line != null) && (state == ALPLineState.APC))
{
if (_line.IsUnderAPCControl &&
(_line.InfoState == ALPLine.CallInfoState.SNATCHED_SLAVE_LINE))
{
this.SendSpEvent(new Ev.CommandStatus(_line.ConnectedLine.SPLineInfo.ID, Cmd.CommandID.DISCONNECT_LINE, Diacom.Ev.CmdStatus.OK));
}
else if (!_line.IsUnderAPCControl)
{
if (_line.InfoState == ALPLine.CallInfoState.CALL_INFO_RECEIVED)
{
// Have new connected line. Creating and sending event.
TraceOut.Put("AltiGenSP:: Line is APC controlled now");
_line.IsUnderAPCControl = true;
this.SendSpEvent(new Ev.Connect(lineID));
foreach (string _digit in _line.Digits)
{
this.SendSpEvent(new Ev.Digit(lineID, _digit[0]));
}
}
else
{
_line.InfoState = ALPLine.CallInfoState.CONNECT_DELAYED;
}
}
}
break;
}
// Event Ev.Digit.
case ALPEvID.APC_DIGIT:
{
// Getting parameters.
AltiLinkPlus.ALPParameter param = (AltiLinkPlus.ALPParameter)altiEvent[0];
int lineID = param.ReadInt32();
char digit = Convert.ToChar(param.ReadByte());
// Creating and sending event.
ALPLine _line = this[lineID];
if (_line.IsUnderAPCControl)
{
this.SendSpEvent(new Ev.Digit(lineID, digit));
}
else
{
_line.Digits.Add(digit.ToString());
}
break;
}
// Event Ev.Disconnect.
case ALPEvID.APC_CALLDROP:
{
// Getting parameters.
int lineID = altiEvent[0].ReadInt32();
ALPLine _line = this[lineID];
break;
}
// Event Ev.CommandStatus.
case ALPEvID.APC_STATUS:
{
// Creating new StateInfo object.
LineStateInfo sInfo = new LineStateInfo((AltiLinkPlus.ALPParameter)(altiEvent[0]));
ALPCmdStatus lastCmdStatus = (ALPCmdStatus)sInfo.cmdStatus;
TraceOut.Put("AltiGenSP::APC Status Line=" + sInfo.lineID + " CmdId=" + ((ALPCmdID)sInfo.commandID).ToString()
+ " Status=" + lastCmdStatus.ToString());
// Getting current line from hashtable.
ALPLine _line = this[sInfo.lineID];
if (_line == null)
{
break;
}
// Save the last status
_line.LastCommand.Status = lastCmdStatus;
// What was the command issued?
switch ((ALPCmdID)(sInfo.commandID))
{
// Status of APC_PLAY_DTMF command.
case ALPCmdID.APC_PLAY_DTMF:
if (lastCmdStatus == ALPCmdStatus.FAILED)
{
this.SendSpEvent(new Ev.CommandStatus(sInfo.lineID, Cmd.CommandID.PLAY_DTMF, Ev.CmdStatus.ERROR));
}
else
{
this.SendSpEvent(new Ev.CommandStatus(sInfo.lineID, Cmd.CommandID.PLAY_DTMF, Ev.CmdStatus.OK));
}
break;
// Status of APC_PLAY_VOICE command.
case ALPCmdID.APC_PLAY_VOICE:
if (lastCmdStatus == ALPCmdStatus.FINISHED)
{
this.SendSpEvent(new Ev.CommandStatus(sInfo.lineID, Cmd.CommandID.PLAY_FILE, Ev.CmdStatus.OK));
}
else if (lastCmdStatus == ALPCmdStatus.FAILED)
{
this.SendSpEvent(new Ev.CommandStatus(sInfo.lineID, Cmd.CommandID.PLAY_FILE, Ev.CmdStatus.ERROR));
}
break;
// Status of APC_RECORD_VOICE command.
case ALPCmdID.APC_RECORD_VOICE:
if (lastCmdStatus == ALPCmdStatus.FINISHED)
{
this.SendSpEvent(new Ev.CommandStatus(sInfo.lineID, Cmd.CommandID.RECORD_FILE, Ev.CmdStatus.OK));
}
else if (lastCmdStatus == ALPCmdStatus.FAILED)
{
this.SendSpEvent(new Ev.CommandStatus(sInfo.lineID, Cmd.CommandID.RECORD_FILE, Ev.CmdStatus.ERROR));
}
break;
// Status of APC_CONNECT_CALL command.
case ALPCmdID.APC_CONNECT_CALL:
if (lastCmdStatus == ALPCmdStatus.SUCCEED)
{
this.SendSpEvent(new Ev.CommandStatus(sInfo.lineID, Cmd.CommandID.CONNECT_LINES, Ev.CmdStatus.OK));
}
else
{
this.SendSpEvent(new Ev.CommandStatus(sInfo.lineID, Cmd.CommandID.CONNECT_LINES, Ev.CmdStatus.ERROR));
}
break;
// Status of APC_TRANSFER_CALL command.
case ALPCmdID.APC_TRANSFER_CALL:
if (lastCmdStatus != ALPCmdStatus.SUCCEED)
{
this.SendSpEvent(new Ev.CommandStatus(sInfo.lineID, Cmd.CommandID.TRANSFER, Ev.CmdStatus.ERROR));
}
break;
// Status of APC_DROP_CALL command.
case ALPCmdID.APC_DROP_CALL:
if (lastCmdStatus == ALPCmdStatus.SUCCEED)
{
this.SendSpEvent(new Ev.CommandStatus(sInfo.lineID, Cmd.CommandID.DROP_CALL, Ev.CmdStatus.OK));
}
else
{
this.SendSpEvent(new Ev.CommandStatus(sInfo.lineID, Cmd.CommandID.DROP_CALL, Ev.CmdStatus.ERROR));
}
break;
}
break;
}
default:
{
base.ProcessEvent(altiEvent);
break;
}
}
}
// Getting information for ALL line PADs - just want to know that is going on.
switch ((ALPEvID)(altiEvent.CommandId))
{
case ALPEvID.STCHG:
{
if (altiEvent.LocationId == ControlLocationID)
{
break; // We already processed this above
}
// Saving line state.
ALPLineState state = (ALPLineState)(altiEvent[0].ReadInt32());
ALPLine _line = this[altiEvent.LocationId];
TraceOut.Put("AltiGenSP::Line State=" + ((SPLineState)state).ToString());
if (_line != null)
{
// Rasing event the line is disconnected if status is DISCONNECT.
if (state == ALPLineState.IDLE)
{
if (_line.IsUnderAPCControl)
{
TraceOut.Put("AltiGenSP:: Line is not APC controlled");
_line.IsUnderAPCControl = false;
_line.InfoState = ALPLine.CallInfoState.INITIAL;
this.SendSpEvent(new Ev.Disconnect(_line.SPLineInfo.ID));
}
}
else if ((state == ALPLineState.CONNECTED) && (_line.LastCommand.ID == ALPCmdID.APC_TRANSFER_CALL))
{
this.SendSpEvent(new Ev.CommandStatus(_line.SPLineInfo.ID, Cmd.CommandID.TRANSFER, Ev.CmdStatus.OK));
}
_line.SPLineInfo.State = (SPLineState)state;
// Rasing event state of the line changed.
this.SendSpEvent(new Ev.LineStateChanged(_line.SPLineInfo.ID, (SPLineState)state));
}
break;
}
// Event Ev.Tone.
case ALPEvID.TONE:
{
// Getting parameters.
AltiLinkPlus.ALPParameter param = (AltiLinkPlus.ALPParameter)altiEvent[0];
int lineID = param.ReadInt32();
param = (AltiLinkPlus.ALPParameter)altiEvent[1];
int tone = Convert.ToChar(param.ReadInt32());
// Creating and sending event.
this.SendSpEvent(new Ev.Tone(lineID, ((Ev.ToneType)(tone))));
break;
}
// Line information changed.
case ALPEvID.CONFIG_CHG:
{
const int CONFIG_CHANGED_TYPE_LINEINFO = 0x8000;
AltiLinkPlus.ALPParameter param = (AltiLinkPlus.ALPParameter)altiEvent[0];
int type = param.ReadInt32();
if (type == CONFIG_CHANGED_TYPE_LINEINFO)
{
// Command to Get Lines Information.
this.SendALPCommand(new Diacom.AltiGen.AltiLinkPlus.ALPCommand(altiEvent.LocationId, Convert.ToInt32(ALPCmdID.GET_LINEINFO)));
}
break;
}
// System configuration changed.
case ALPEvID.SYSCONFIG_CHG:
{
AltiLinkPlus.ALPParameter param = (AltiLinkPlus.ALPParameter)altiEvent[0];
SystemConfigChangeCodes type = ((SystemConfigChangeCodes)(param.ReadInt32()));
switch (type)
{
// Line added.
case SystemConfigChangeCodes.LINEADD:
{
// Issue command to Get Line Information. When we get the response - then the code there will send an event.
this.SendALPCommand(new Diacom.AltiGen.AltiLinkPlus.ALPCommand(altiEvent.LocationId, Convert.ToInt32(ALPCmdID.GET_LINEINFO)));
break;
}
// Line removed.
case SystemConfigChangeCodes.LINEREMOVE:
{
this.SendSpEvent(new Ev.LineStateChanged(altiEvent.LocationId, SPLineState.LINE_REMOVE));
break;
}
}
break;
}
default:
{
if (altiEvent.LocationId != ControlLocationID)
{
base.ProcessEvent(altiEvent);
}
break;
}
}
}
