public void Calculate()
{
using (var calculateDlg = new CalculateIsolationSchemeDlg())
{
if (calculateDlg.ShowDialog(this) == DialogResult.OK)
{
// Get calculated isolation windows from Calculate dialog.
_gridViewDriver.Items.Clear();
var isolationWindows = calculateDlg.IsolationWindows;
if (isolationWindows.Count == 0)
{
return;
}
// Determine whether isolation windows have a target and margins.
cbSpecifyMargin.Checked = (isolationWindows[0].StartMargin.HasValue &&
!Equals(isolationWindows[0].StartMargin.Value, 0.0));
// Determine whether CE range is specified.
cbSpecifyCERange.Checked = (isolationWindows[0].CERange.HasValue);
// Determine if calculation was on Isolation Or Extraction
comboIsolation.SelectedItem = calculateDlg.IsIsolation
? WindowType.MEASUREMENT
: WindowType.EXTRACTION;
// Load isolation windows into grid.
foreach (var window in isolationWindows)
{
_gridViewDriver.Items.Add(window);
}
// Copy multiplexed windows settings.
comboDeconvPre.SelectedItem = calculateDlg.Deconvolution;
textWindowsPerScan.Text = calculateDlg.Multiplexed
? calculateDlg.WindowsPerScan.ToString(LocalizationHelper.CurrentCulture)
: string.Empty;
}
}
}
// Set dialog values and check the calculated isolation window values. Finally, OK the calculation dialog and open a fresh one.
private void CheckWindows(Action act, params double?[] args)
{
RunUI(() =>
{
act();
var isolationWindows = _calcDlg.IsolationWindows;
var expectedColumns = 2;
if (_calcDlg.MarginLeft.HasValue)
expectedColumns++;
if (_calcDlg.CERange.HasValue)
expectedColumns++;
Assert.AreEqual(isolationWindows.Count * expectedColumns, args.Length,
"Expected {0} isolation windows, but got {1}.", args.Length / expectedColumns, isolationWindows.Count);
int i = 0;
foreach (var window in isolationWindows)
{
CheckValue(window.Start, args[i++], "Start");
CheckValue(window.End, args[i++], "End");
if (_calcDlg.MarginLeft.HasValue)
CheckValue(window.StartMargin, args[i++], "Start margin");
if (_calcDlg.CERange.HasValue)
CheckValue(window.CERange, args[i++], "CE Range");
}
});
OkDialog(_calcDlg, _calcDlg.OkDialog);
_calcDlg = ShowDialog<CalculateIsolationSchemeDlg>(_editDlg.Calculate);
}
protected override void DoTest()
{
// Display full scan tab.
var fullScanDlg = ShowDialog<TransitionSettingsUI>(SkylineWindow.ShowTransitionSettingsUI);
RunUI(() =>
{
fullScanDlg.SelectedTab = TransitionSettingsUI.TABS.FullScan;
fullScanDlg.AcquisitionMethod = FullScanAcquisitionMethod.DIA;
});
// Open the isolation scheme dialog and calculate dialog.
_editDlg = ShowDialog<EditIsolationSchemeDlg>(fullScanDlg.AddIsolationScheme);
RunUI(() => _editDlg.UseResults = false);
_calcDlg = ShowDialog<CalculateIsolationSchemeDlg>(_editDlg.Calculate);
// Check Start values.
CheckError(() => _calcDlg.Start = null, Resources.MessageBoxHelper_ValidateDecimalTextBox__0__must_contain_a_decimal_value, 1);
CheckError(() => _calcDlg.Start = 49, Resources.MessageBoxHelper_ValidateDecimalTextBox__0__must_be_greater_than_or_equal_to__1__, 2);
CheckError(() => _calcDlg.Start = 2001, Resources.MessageBoxHelper_ValidateDecimalTextBox__0__must_be_less_than_or_equal_to__1__, 2);
CheckError(() => _calcDlg.Start = 100, Resources.MessageBoxHelper_ValidateDecimalTextBox__0__must_contain_a_decimal_value, 1);
// Check End values.
CheckError(() => _calcDlg.End = 49, Resources.MessageBoxHelper_ValidateDecimalTextBox__0__must_be_greater_than_or_equal_to__1__, 2);
CheckError(() => _calcDlg.End = 2001, Resources.MessageBoxHelper_ValidateDecimalTextBox__0__must_be_less_than_or_equal_to__1__, 2);
CheckError(() => _calcDlg.End = 100, Resources.CalculateIsolationSchemeDlg_OkDialog_Start_value_must_be_less_than_End_value);
CheckError(() => _calcDlg.End = 101, Resources.MessageBoxHelper_ValidateDecimalTextBox__0__must_contain_a_decimal_value, 1);
// Check WindowWidth values.
CheckError(() => _calcDlg.WindowWidth = 0.099, Resources.MessageBoxHelper_ValidateDecimalTextBox__0__must_be_greater_than_or_equal_to__1__, 2);
CheckError(() => _calcDlg.WindowWidth = 1951, Resources.MessageBoxHelper_ValidateDecimalTextBox__0__must_be_less_than_or_equal_to__1__, 2);
CheckError(() => _calcDlg.WindowWidth = 1950, Resources.CalculateIsolationSchemeDlg_OkDialog_Window_width_must_be_less_than_or_equal_to_the_isolation_range);
CheckError(() => _calcDlg.WindowWidth = 1);
// Check Margin values.
CheckError(() =>
{
_calcDlg.Start = 100;
_calcDlg.End = 101;
_calcDlg.WindowWidth = 1;
_calcDlg.Deconvolution = EditIsolationSchemeDlg.DeconvolutionMethod.NONE;
_calcDlg.MarginLeft = 1951;
},
Resources.MessageBoxHelper_ValidateDecimalTextBox__0__must_be_less_than_or_equal_to__1__, 2);
CheckError(() => _calcDlg.MarginLeft = 1900, Resources.IsolationWindow_DoValidate_Isolation_window_margins_cover_the_entire_isolation_window_at_the_extremes_of_the_instrument_range);
// One simple window.
CheckWindows(() =>
{
_calcDlg.Start = 100;
_calcDlg.End = 101;
_calcDlg.WindowWidth = 1;
_calcDlg.MarginLeft = null;
},
100, 101);
// Two simple windows with overlap.
CheckWindows(() =>
{
_calcDlg.Start = 100;
_calcDlg.End = 101;
_calcDlg.WindowWidth = 1;
_calcDlg.Deconvolution = EditIsolationSchemeDlg.DeconvolutionMethod.OVERLAP;
},
100, 101,
101, 102,
99.5, 100.5,
100.5, 101.5);
// One max-range window.
CheckWindows(() =>
{
_calcDlg.Start = 50;
_calcDlg.End = 2000;
_calcDlg.WindowWidth = 1950;
},
50, 2000);
// One max-range window with margins.
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.EXTRACTION;
_calcDlg.Start = 50;
_calcDlg.End = 2000;
_calcDlg.WindowWidth = 1950;
_calcDlg.MarginLeft = 5;
},
55, 1995, 5);
// One max-range window with CE Range.
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.EXTRACTION;
_calcDlg.Start = 50;
_calcDlg.End = 2000;
_calcDlg.WindowWidth = 1950;
_calcDlg.CERange = 10;
},
50, 2000, 10);
// One max-range window with margin and CE Range.
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.EXTRACTION;
_calcDlg.Start = 50;
_calcDlg.End = 2000;
_calcDlg.WindowWidth = 1950;
_calcDlg.MarginLeft = 5;
_calcDlg.CERange = 10;
},
55, 1995, 5, 10);
// Now with window optimization.
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.EXTRACTION;
_calcDlg.Start = 50;
_calcDlg.End = 1900;
_calcDlg.WindowWidth = 1850;
_calcDlg.MarginLeft = 5;
_calcDlg.OptimizeWindowPlacement = true;
},
55, 1901.1140, 5);
// Overlap without window optimization. Even window width
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.MEASUREMENT;
_calcDlg.Start = 495;
_calcDlg.End = 545;
_calcDlg.WindowWidth = 20;
_calcDlg.Deconvolution = EditIsolationSchemeDlg.DeconvolutionMethod.OVERLAP;
_calcDlg.OptimizeWindowPlacement = false;
},
495, 515,
515, 535,
535, 555,
485, 505,
505, 525,
525, 545);
// Overlap with window optimization. Even window width.
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.MEASUREMENT;
_calcDlg.Start = 495;
_calcDlg.End = 545;
_calcDlg.WindowWidth = 20;
_calcDlg.Deconvolution = EditIsolationSchemeDlg.DeconvolutionMethod.OVERLAP;
_calcDlg.OptimizeWindowPlacement = true;
},
495.4751, 515.4842,
515.4842, 535.4933,
535.4933, 555.5024,
485.4706, 505.4796,
505.4796, 525.4887,
525.4887, 545.4978);
// Overlap without window optimization. Even window width. Overlap range not divisble by overlap width.
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.MEASUREMENT;
_calcDlg.Start = 495;
_calcDlg.End = 546;
_calcDlg.WindowWidth = 20;
_calcDlg.Deconvolution = EditIsolationSchemeDlg.DeconvolutionMethod.OVERLAP;
_calcDlg.OptimizeWindowPlacement = false;
},
495, 515,
515, 535,
535, 555,
555, 575,
485, 505,
505, 525,
525, 545,
545, 565);
// Overlap with window optimization. Even window width. Overlap range not divisble by overlap width.
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.MEASUREMENT;
_calcDlg.Start = 495;
_calcDlg.End = 546;
_calcDlg.WindowWidth = 20;
_calcDlg.Deconvolution = EditIsolationSchemeDlg.DeconvolutionMethod.OVERLAP;
_calcDlg.OptimizeWindowPlacement = true;
},
495.4751, 515.4842,
515.4842, 535.4933,
535.4933, 555.5024,
555.5024, 575.5115,
485.4706, 505.4796,
505.4796, 525.4887,
525.4887, 545.4978,
545.4978, 565.5069);
// Overlap without window optimization. Odd window width.
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.MEASUREMENT;
_calcDlg.Start = 495;
_calcDlg.End = 501;
_calcDlg.WindowWidth = 3;
_calcDlg.Deconvolution = EditIsolationSchemeDlg.DeconvolutionMethod.OVERLAP;
_calcDlg.OptimizeWindowPlacement = false;
},
495.0, 498.0,
498.0, 501.0,
501.0, 504.0,
493.5, 496.5,
496.5, 499.5,
499.5, 502.5);
// Overlap with window optimization. Odd window width.
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.MEASUREMENT;
_calcDlg.Start = 495;
_calcDlg.End = 501;
_calcDlg.WindowWidth = 3;
_calcDlg.Deconvolution = EditIsolationSchemeDlg.DeconvolutionMethod.OVERLAP;
_calcDlg.OptimizeWindowPlacement = true;
},
495.4751, 498.4765,
498.4765, 501.4778,
501.4778, 504.4792,
494.4746, 497.4760,
497.4760, 500.4774,
500.4774, 503.4787);
// Four windows that fit exactly.
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.EXTRACTION;
_calcDlg.Start = 100;
_calcDlg.End = 200;
_calcDlg.WindowWidth = 25;
_calcDlg.MarginLeft = 1;
},
100, 125, 1,
125, 150, 1,
150, 175, 1,
175, 200, 1);
// Four windows that don't fit exactly.
CheckWindows(() =>
{
_calcDlg.WindowType = EditIsolationSchemeDlg.WindowType.EXTRACTION;
_calcDlg.Start = 100;
_calcDlg.End = 200;
_calcDlg.WindowWidth = 33;
_calcDlg.MarginLeft = 1;
},
100, 133, 1,
133, 166, 1,
166, 199, 1,
199, 232, 1);
// One optimized window.
CheckWindows(() =>
{
_calcDlg.Start = 100;
_calcDlg.End = 101;
_calcDlg.WindowWidth = 1;
_calcDlg.OptimizeWindowPlacement = true;
},
100.2955, 101.2959);
// More than max number of windows.
RunUI(() =>
{
_calcDlg.Start = 100;
_calcDlg.End = 2000;
_calcDlg.WindowWidth = 1;
// Cover miscellaneous Get methods.
string x = _calcDlg.Start + _calcDlg.End + _calcDlg.WindowWidth +
_calcDlg.MarginLeft.ToString();
Assert.IsTrue(x != null); // Just using this so ReSharper won't complain.
});
// Cancel all dialogs to conclude test.
OkDialog(_calcDlg, _calcDlg.CancelButton.PerformClick);
OkDialog(_editDlg, _editDlg.CancelButton.PerformClick);
OkDialog(fullScanDlg, fullScanDlg.CancelButton.PerformClick);
}
// Set dialog values, and check for the expected error message.
private void CheckError(Action func, string errorMessage = null, int replacement = 0)
{
RunUI(func);
if (errorMessage == null)
{
OkDialog(_calcDlg, _calcDlg.OkDialog);
_calcDlg = ShowDialog<CalculateIsolationSchemeDlg>(_editDlg.Calculate);
}
else
{
RunDlg<MessageDlg>(_calcDlg.OkDialog, messageDlg =>
{
AssertEx.AreComparableStrings(errorMessage,messageDlg.Message,replacement);
messageDlg.OkDialog();
});
}
}