/// <summary>
/// CAMデータの生成
/// </summary>
/// <param name="camOut"></param>
public override void GenerateCamData(CamOut camOut)
{
int drillSize = Diameter;
int stSize = Diameter + DEFAULT_SRMARGIN * 2;
Point pt0 = GetPos(0);
Point pt1 = GetPos(0);
CamOutBaseData camd;
camd = new CamOutBaseData(MbeLayer.LayerValue.DRL,
CamOutBaseData.CamType.DRILL,
CamOutBaseData.Shape.Drill,
drillSize, drillSize, pt0, pt1);
camOut.Add(camd);
camd = new CamOutBaseData(MbeLayer.LayerValue.STC,
CamOutBaseData.CamType.FLASH,
CamOutBaseData.Shape.Obround,
stSize, stSize, pt0, pt1);
camOut.Add(camd);
camd = new CamOutBaseData(MbeLayer.LayerValue.STS,
CamOutBaseData.CamType.FLASH,
CamOutBaseData.Shape.Obround,
stSize, stSize, pt0, pt1);
camOut.Add(camd);
}
/// <summary>
/// CAMデータの生成
/// </summary>
/// <param name="camOut"></param>
public override void GenerateCamData(CamOut camOut)
{
Point pt0 = GetPos(0);
Point pt1 = GetPos(1);
Point ptVia;
bool bendMode = getPointVia(out ptVia);
CamOutBaseData camd;
if (!bendMode)
{
camd = new CamOutBaseData(layer,
CamOutBaseData.CamType.VECTOR,
CamOutBaseData.Shape.Obround,
lineWidth, lineWidth, pt0, pt1);
camOut.Add(camd);
}
else
{
camd = new CamOutBaseData(layer,
CamOutBaseData.CamType.VECTOR,
CamOutBaseData.Shape.Obround,
lineWidth, lineWidth, pt0, ptVia);
camOut.Add(camd);
camd = new CamOutBaseData(layer,
CamOutBaseData.CamType.VECTOR,
CamOutBaseData.Shape.Obround,
lineWidth, lineWidth, ptVia, pt1);
camOut.Add(camd);
}
}
/// <summary>
/// CAMデータの生成
/// </summary>
/// <param name="camOut"></param>
public override void GenerateCamData(CamOut camOut)
{
int width = PadSize.Width;
int height = PadSize.Height;
Point pt0 = GetPos(0);
Point pt1 = GetPos(0);
CamOutBaseData camd;
CamOutBaseData.Shape _shape = (shape == PadShape.Rect ? CamOutBaseData.Shape.Rect : CamOutBaseData.Shape.Obround);
camd = new CamOutBaseData(layer, CamOutBaseData.CamType.FLASH,
_shape, width, height, pt0, pt1);
camOut.Add(camd);
if (layer == MbeLayer.LayerValue.CMP || layer == MbeLayer.LayerValue.SOL)
{
if (!no_ResistMask) //Version 0.50
{
int stWidth = PadSize.Width + SrMargin * 2;
int stHeight = PadSize.Height + SrMargin * 2;
MbeLayer.LayerValue stLayer = (layer == MbeLayer.LayerValue.CMP ? MbeLayer.LayerValue.STC : MbeLayer.LayerValue.STS);
camd = new CamOutBaseData(stLayer, CamOutBaseData.CamType.FLASH,
_shape, stWidth, stHeight, pt0, pt1);
camOut.Add(camd);
}
if (!no_MM)
{
int stWidth = PadSize.Width - MmReduce * 2;
int stHeight = PadSize.Height - MmReduce * 2;
MbeLayer.LayerValue stLayer = (layer == MbeLayer.LayerValue.CMP ? MbeLayer.LayerValue.MMC : MbeLayer.LayerValue.MMS);
camd = new CamOutBaseData(stLayer, CamOutBaseData.CamType.FLASH,
_shape, stWidth, stHeight, pt0, pt1);
camOut.Add(camd);
}
}
}
/// <summary>
/// CAMデータの生成
/// </summary>
/// <param name="camOut"></param>
public override void GenerateCamData(CamOut camOut)
{
int width = PadSize.Width;
int height = PadSize.Height;
int stWidth = PadSize.Width + SrMargin * 2;
int stHeight = PadSize.Height + SrMargin * 2;
int drillSize = Diameter;
Point pt0 = GetPos(0);
Point pt1 = GetPos(0);
int innerLandDia = InnerLandDia;
CamOutBaseData camd;
CamOutBaseData.Shape _shape = (shape == PadShape.Rect ? CamOutBaseData.Shape.Rect : CamOutBaseData.Shape.Obround);
camd = new CamOutBaseData(MbeLayer.LayerValue.DRL, CamOutBaseData.CamType.DRILL,
CamOutBaseData.Shape.DrillPTH, drillSize, drillSize, pt0, pt1);
camOut.Add(camd);
camd = new CamOutBaseData(MbeLayer.LayerValue.CMP, CamOutBaseData.CamType.FLASH,
_shape, width, height, pt0, pt1);
camOut.Add(camd);
if ((innerLayerConnectionInfo & (ulong)MbeLayer.LayerValue.L2) != 0)
{
camd = new CamOutBaseData(MbeLayer.LayerValue.L2, CamOutBaseData.CamType.FLASH,
_shape, innerLandDia, innerLandDia, pt0, pt1);
camOut.Add(camd);
}
if ((innerLayerConnectionInfo & (ulong)MbeLayer.LayerValue.L3) != 0)
{
camd = new CamOutBaseData(MbeLayer.LayerValue.L3, CamOutBaseData.CamType.FLASH,
_shape, innerLandDia, innerLandDia, pt0, pt1);
camOut.Add(camd);
}
camd = new CamOutBaseData(MbeLayer.LayerValue.SOL, CamOutBaseData.CamType.FLASH,
_shape, width, height, pt0, pt1);
camOut.Add(camd);
if (!no_ResistMask)
{
camd = new CamOutBaseData(MbeLayer.LayerValue.STC, CamOutBaseData.CamType.FLASH,
_shape, stWidth, stHeight, pt0, pt1);
camOut.Add(camd);
camd = new CamOutBaseData(MbeLayer.LayerValue.STS, CamOutBaseData.CamType.FLASH,
_shape, stWidth, stHeight, pt0, pt1);
camOut.Add(camd);
}
}
/// <summary>
/// CAMデータの生成
/// </summary>
/// <param name="camOut"></param>
public override void GenerateCamData(CamOut camOut)
{
CamOutBaseData camd;
foreach (MbeGapChkObjLine obj in fillLineList)
{
Point pt0 = obj.p0;
Point pt1 = obj.p1;
camd = new CamOutBaseData(layer,
CamOutBaseData.CamType.VECTOR,
CamOutBaseData.Shape.Obround,
traceWidth, traceWidth, pt0, pt1);
camOut.Add(camd);
}
}
/// <summary>
/// CAMデータの生成
/// </summary>
/// <param name="camOut"></param>
public override void GenerateCamData(CamOut camOut)
{
if (layer == MbeLayer.LayerValue.DOC)
{
return;
}
LinkedList <CamOutBaseData> camdataLList = new LinkedList <CamOutBaseData>();
bool reverse;
switch (layer)
{
case MbeLayer.LayerValue.PLS:
case MbeLayer.LayerValue.STS:
case MbeLayer.LayerValue.SOL:
reverse = true;
break;
default:
reverse = false;
break;
}
MbeView.boardFont.GenerateCamDataString(camdataLList, 0, 0, reverse, signame, TextHeight, LineWidth);
Point ptz = new Point(0, 0);
Point pt = GetPos(0);
foreach (CamOutBaseData camd in camdataLList)
{
if (dir != 0)
{
camd.RotateStep90(dir, ptz);
}
camd.Move(pt);
camd.layer = layer;
camOut.Add(camd);
}
}
/// <summary>
/// CAMデータの生成
/// </summary>
/// <param name="camOut"></param>
public override void GenerateCamData(CamOut camOut)
{
int _endAngle;
if (LimitStartEnd())
{
_endAngle = startAngle + 3600;
}
else
{
_endAngle = endAngle;
if (_endAngle == startAngle)
{
_endAngle = startAngle + 3600;
}
else if (_endAngle < startAngle)
{
_endAngle += 3600;
}
}
int angle = startAngle;
bool endFlag = false;
int x;
int y;
double angleRad;
angleRad = (double)angle / 1800.0 * Math.PI;
x = (int)Math.Round(radius * Math.Cos(angleRad)) + posArray[0].X;
y = (int)Math.Round(radius * Math.Sin(angleRad)) + posArray[0].Y;
Point pt0 = new Point(x, y);
Point pt1;
double division = radius * Math.PI * 2 / CAMOUT_MAXLINELENGTH;
if (division < CAMOUT_DIVISION)
{
division = CAMOUT_DIVISION;
}
while (!endFlag)
{
angle += (int)Math.Round(3600 / division);
if (angle >= _endAngle)
{
endFlag = true;
angle = _endAngle;
}
angleRad = (double)angle / 1800.0 * Math.PI;
x = (int)Math.Round(radius * Math.Cos(angleRad)) + posArray[0].X;
y = (int)Math.Round(radius * Math.Sin(angleRad)) + posArray[0].Y;
pt1 = new Point(x, y);
if (!pt0.Equals(pt1)) //ゼロ長データは出力しない
{
CamOutBaseData camd = new CamOutBaseData(layer,
CamOutBaseData.CamType.VECTOR,
CamOutBaseData.Shape.Obround,
lineWidth, lineWidth, pt0, pt1);
camOut.Add(camd);
pt0 = pt1;
}
}
}