public Form1()
{
InitializeComponent();
var assembly = System.Reflection.Assembly.GetExecutingAssembly();
Version version = assembly.GetName().Version;
Icon = Icon.ExtractAssociatedIcon(assembly.Location);
Text = String.Format("AVRDUDESS v{0}.{1}", version.Major, version.Minor);
enableClientAreaDrag(Controls);
// Update COM ports
cmbPort.DropDown += new System.EventHandler(this.cbPort_DropDown);
// Drag and drop
gbFlashFile.AllowDrop = true;
gbFlashFile.DragEnter += new DragEventHandler(event_DragEnter);
gbFlashFile.DragDrop += new DragEventHandler(event_DragDrop);
// Drag and drop
gbEEPROMFile.AllowDrop = true;
gbEEPROMFile.DragEnter += new DragEventHandler(event_DragEnter);
gbEEPROMFile.DragDrop += new DragEventHandler(event_DragDrop);
openFileDialog1.Filter = "Hex files (*.hex)|*.hex";
openFileDialog1.Filter += "|EEPROM files (*.eep)|*.eep";
openFileDialog1.Filter += "|All files (*.*)|*.*";
openFileDialog1.CheckFileExists = false;
openFileDialog1.FileName = "";
openFileDialog1.Title = "Open flash file";
openFileDialog2.Filter = "EEPROM files (*.eep)|*.eep";
openFileDialog2.Filter += "|Hex files (*.hex)|*.hex";
openFileDialog2.Filter += "|All files (*.*)|*.*";
openFileDialog2.CheckFileExists = false;
openFileDialog2.FileName = "";
openFileDialog2.Title = "Open EEPROM file";
fileFormats.Add(new FileFormat("a", "Auto (writing only)"));
fileFormats.Add(new FileFormat("i", "Intel Hex"));
fileFormats.Add(new FileFormat("s", "Motorola S-record"));
fileFormats.Add(new FileFormat("r", "Raw binary"));
fileFormats.Add(new FileFormat("d", "Decimal (reading only)"));
fileFormats.Add(new FileFormat("h", "Hexadecimal (reading only)"));
fileFormats.Add(new FileFormat("b", "Binary (reading only)"));
cmdLine = new CmdLine(this);
presets = new Presets(this);
savePreset = new FormPresetSave(this);
deletePreset = new FormPresetDelete(this);
avrdude = new Avrdude(this);
}
private void Form1_Load(object sender, EventArgs e)
{
// Load saved configuration
Config.Prop.load();
cmdLine = new CmdLine(this);
avrdude = new Avrdude();
avrsize = new Avrsize();
avrdude.OnProcessStart += avrdude_OnProcessStart;
avrdude.OnProcessEnd += avrdude_OnProcessEnd;
avrdude.OnVersionChange += avrdude_OnVersionChange;
avrdude.OnDetectedMCU += avrdude_OnDetectedMCU;
avrdude.load();
avrsize.load();
// Setup memory files/usage bars
// Flash
fileFlash = new MemTypeFile(txtFlashFile, avrsize);
fileFlash.sizeChanged += fileFlash_sizeChanged;
pbFlashUsage.Width = txtFlashFile.Width;
pbFlashUsage.Height = 3;
pbFlashUsage.Location = new Point(txtFlashFile.Location.X, txtFlashFile.Location.Y - pbFlashUsage.Height);
pbFlashUsage.Image = new Bitmap(pbFlashUsage.Width, pbFlashUsage.Height);
memoryUsageBar(fileFlash, pbFlashUsage, 0);
// EEPROM
fileEEPROM = new MemTypeFile(txtEEPROMFile, avrsize);
fileEEPROM.sizeChanged += fileEEPROM_sizeChanged;
pbEEPROMUsage.Width = txtEEPROMFile.Width;
pbEEPROMUsage.Height = 3;
pbEEPROMUsage.Location = new Point(txtEEPROMFile.Location.X, txtEEPROMFile.Location.Y - pbEEPROMUsage.Height);
pbEEPROMUsage.Image = new Bitmap(pbEEPROMUsage.Width, pbEEPROMUsage.Height);
memoryUsageBar(fileEEPROM, pbEEPROMUsage, 0);
enableClientAreaDrag(Controls);
// Update serial ports etc
cmbPort.DropDown += cbPort_DropDown;
// Drag and drop flash file
gbFlashFile.AllowDrop = true;
gbFlashFile.DragEnter += event_DragEnter;
gbFlashFile.DragDrop += event_DragDrop;
// Drag and drop EEPROM file
gbEEPROMFile.AllowDrop = true;
gbEEPROMFile.DragEnter += event_DragEnter;
gbEEPROMFile.DragDrop += event_DragDrop;
// Flash file
openFileDialog1.Filter = "Hex files (*.hex)|*.hex";
openFileDialog1.Filter += "|EEPROM files (*.eep)|*.eep";
openFileDialog1.Filter += "|All files (*.*)|*.*";
openFileDialog1.CheckFileExists = false;
openFileDialog1.FileName = "";
openFileDialog1.Title = "Open flash file";
// EEPROM file
openFileDialog2.Filter = "EEPROM files (*.eep)|*.eep";
openFileDialog2.Filter += "|Hex files (*.hex)|*.hex";
openFileDialog2.Filter += "|All files (*.*)|*.*";
openFileDialog2.CheckFileExists = false;
openFileDialog2.FileName = "";
openFileDialog2.Title = "Open EEPROM file";
// MCU & programmer combo box data source
setComboBoxDataSource(cmbMCU, avrdude.mcus, "fullName");
cmbMCU.SelectedIndexChanged += cmbMCU_SelectedIndexChanged;
setComboBoxDataSource(cmbProg, avrdude.programmers, "fullName");
cmbProg.SelectedIndexChanged += cmbProg_SelectedIndexChanged;
// USBasp frequency settings
cmbUSBaspFreq.Hide();
setComboBoxDataSource(cmbUSBaspFreq, Avrdude.USBaspFreqs, "name");
cmbUSBaspFreq.Width = txtBitClock.Width;
cmbUSBaspFreq.Left = txtBitClock.Left;
cmbUSBaspFreq.Top = txtBitClock.Top;
// Flash & EEPROM file formats
setComboBoxDataSource(cmbFlashFormat, Avrdude.fileFormats, "fullName");
setComboBoxDataSource(cmbEEPROMFormat, Avrdude.fileFormats, "fullName");
// Verbosity levels
cmdVerbose.Items.Clear();
for (byte i=0;i<5;i++)
cmdVerbose.Items.Add(i);
cmdVerbose.SelectedIndex = 0;
// Tool tips
ToolTips = new ToolTip();
ToolTips.ReshowDelay = 100;
ToolTips.UseAnimation = false;
ToolTips.UseFading = false;
ToolTips.SetToolTip(cmbProg, "Programmer");
ToolTips.SetToolTip(cmbMCU, "MCU to program");
ToolTips.SetToolTip(cmbPort, "Set COM/LTP/USB port");
ToolTips.SetToolTip(txtBaudRate, "Port baud rate");
ToolTips.SetToolTip(txtBitClock, "Bit clock period (us)");
ToolTips.SetToolTip(txtFlashFile, "Hex file (.hex)" + Environment.NewLine + "You can also drag and drop files here");
ToolTips.SetToolTip(pFlashOp, "");
ToolTips.SetToolTip(txtEEPROMFile, "EEPROM file (.eep)" + Environment.NewLine + "You can also drag and drop files here");
ToolTips.SetToolTip(pEEPROMOp, "");
ToolTips.SetToolTip(cbForce, "Skip signature check");
ToolTips.SetToolTip(cbNoVerify, "Don't verify after writing");
ToolTips.SetToolTip(cbDisableFlashErase, "Don't erase flash before writing");
ToolTips.SetToolTip(cbEraseFlashEEPROM, "Erase both flash and EEPROM");
ToolTips.SetToolTip(cbDoNotWrite, "Don't write anything, used for debugging AVRDUDE");
ToolTips.SetToolTip(txtLFuse, "Low fuse");
ToolTips.SetToolTip(txtHFuse, "High fuse");
ToolTips.SetToolTip(txtEFuse, "Extended fuse");
ToolTips.SetToolTip(txtLock, "Lock bits");
ToolTips.SetToolTip(btnFlashGo, "Only write/read/verify flash");
ToolTips.SetToolTip(btnEEPROMGo, "Only write/read/verify EEPROM");
ToolTips.SetToolTip(btnWriteFuses, "Write fuses now");
ToolTips.SetToolTip(btnWriteLock, "Write lock now");
ToolTips.SetToolTip(cbSetFuses, "Write fuses when programming");
ToolTips.SetToolTip(cbSetLock, "Write lock when programming");
// Load saved presets
presets = new Presets(this);
presets.load();
presets.setDataSource(cmbPresets);
// Enable/disable tool tips based on saved config
ToolTips.Active = Config.Prop.toolTips;
ready = true;
// If a preset has not been specified by the command line then use the last used preset
// Credits:
// Uwe Tanger (specifing preset in command line)
// neptune (sticky presets)
if (presetToLoad == null)
presetToLoad = Config.Prop.preset;
// Load preset
PresetData p = presets.presets.Find(s => s.name == presetToLoad);
cmbPresets.SelectedItem = (p != null) ? p : presets.presets.Find(s => s.name == "Default");
// Check for updates
UpdateCheck.check.checkNow();
}
private void Form1_Load(object sender, EventArgs e)
{
// Load saved configuration
Config.Prop.load();
// Persist window location across sessions
// Credits:
// gl.tter
if (Config.Prop.windowLocation != null && Config.Prop.windowLocation != new Point(0, 0))
{
Location = Config.Prop.windowLocation;
}
cmdLine = new CmdLine(this);
avrdude = new Avrdude();
avrsize = new Avrsize();
avrdude.OnProcessStart += avrdude_OnProcessStart;
avrdude.OnProcessEnd += avrdude_OnProcessEnd;
avrdude.OnVersionChange += avrdude_OnVersionChange;
avrdude.OnDetectedMCU += avrdude_OnDetectedMCU;
avrdude.load();
avrsize.load();
// Setup memory files/usage bars
// Flash
fileFlash = new MemTypeFile(txtFlashFile, avrsize);
fileFlash.sizeChanged += fileFlash_sizeChanged;
pbFlashUsage.Width = txtFlashFile.Width;
pbFlashUsage.Height = 3;
pbFlashUsage.Location = new Point(txtFlashFile.Location.X, txtFlashFile.Location.Y - pbFlashUsage.Height);
pbFlashUsage.Image = new Bitmap(pbFlashUsage.Width, pbFlashUsage.Height);
memoryUsageBar(fileFlash, pbFlashUsage, 0);
// EEPROM
fileEEPROM = new MemTypeFile(txtEEPROMFile, avrsize);
fileEEPROM.sizeChanged += fileEEPROM_sizeChanged;
pbEEPROMUsage.Width = txtEEPROMFile.Width;
pbEEPROMUsage.Height = 3;
pbEEPROMUsage.Location = new Point(txtEEPROMFile.Location.X, txtEEPROMFile.Location.Y - pbEEPROMUsage.Height);
pbEEPROMUsage.Image = new Bitmap(pbEEPROMUsage.Width, pbEEPROMUsage.Height);
memoryUsageBar(fileEEPROM, pbEEPROMUsage, 0);
enableClientAreaDrag(Controls);
// Update serial ports etc
cmbPort.DropDown += cbPort_DropDown;
// Drag and drop flash file
gbFlashFile.AllowDrop = true;
gbFlashFile.DragEnter += event_DragEnter;
gbFlashFile.DragDrop += event_DragDrop;
// Drag and drop EEPROM file
gbEEPROMFile.AllowDrop = true;
gbEEPROMFile.DragEnter += event_DragEnter;
gbEEPROMFile.DragDrop += event_DragDrop;
// Flash file
openFileDialog1.Filter = "Hex files (*.hex)|*.hex";
openFileDialog1.Filter += "|EEPROM files (*.eep)|*.eep";
openFileDialog1.Filter += "|All files (*.*)|*.*";
openFileDialog1.CheckFileExists = false;
openFileDialog1.FileName = "";
openFileDialog1.Title = "Open flash file";
// EEPROM file
openFileDialog2.Filter = "EEPROM files (*.eep)|*.eep";
openFileDialog2.Filter += "|Hex files (*.hex)|*.hex";
openFileDialog2.Filter += "|All files (*.*)|*.*";
openFileDialog2.CheckFileExists = false;
openFileDialog2.FileName = "";
openFileDialog2.Title = "Open EEPROM file";
// MCU & programmer combo box data source
setComboBoxDataSource(cmbMCU, avrdude.mcus, "fullName");
cmbMCU.SelectedIndexChanged += cmbMCU_SelectedIndexChanged;
setComboBoxDataSource(cmbProg, avrdude.programmers, "fullName");
cmbProg.SelectedIndexChanged += cmbProg_SelectedIndexChanged;
// USBasp frequency settings
cmbUSBaspFreq.Hide();
setComboBoxDataSource(cmbUSBaspFreq, Avrdude.USBaspFreqs, "name");
cmbUSBaspFreq.Width = txtBitClock.Width;
cmbUSBaspFreq.Left = txtBitClock.Left;
cmbUSBaspFreq.Top = txtBitClock.Top;
// Flash & EEPROM file formats
setComboBoxDataSource(cmbFlashFormat, Avrdude.fileFormats, "fullName");
setComboBoxDataSource(cmbEEPROMFormat, Avrdude.fileFormats, "fullName");
// Verbosity levels
cmdVerbose.Items.Clear();
for (byte i = 0; i < 5; i++)
{
cmdVerbose.Items.Add(i);
}
cmdVerbose.SelectedIndex = 0;
// Tool tips
ToolTips = new ToolTip();
ToolTips.ReshowDelay = 100;
ToolTips.UseAnimation = false;
ToolTips.UseFading = false;
ToolTips.SetToolTip(cmbProg, "Programmer");
ToolTips.SetToolTip(cmbMCU, "MCU to program");
ToolTips.SetToolTip(cmbPort, "Set COM/LTP/USB port");
ToolTips.SetToolTip(txtBaudRate, "Port baud rate");
ToolTips.SetToolTip(txtBitClock, "Bit clock period (us)");
ToolTips.SetToolTip(txtFlashFile, "Hex file (.hex)" + Environment.NewLine + "You can also drag and drop files here");
ToolTips.SetToolTip(pFlashOp, "");
ToolTips.SetToolTip(txtEEPROMFile, "EEPROM file (.eep)" + Environment.NewLine + "You can also drag and drop files here");
ToolTips.SetToolTip(pEEPROMOp, "");
ToolTips.SetToolTip(cbForce, "Skip signature check");
ToolTips.SetToolTip(cbNoVerify, "Don't verify after writing");
ToolTips.SetToolTip(cbDisableFlashErase, "Don't erase flash before writing" + Environment.NewLine + "Use this if you only want to update EEPROM");
ToolTips.SetToolTip(cbEraseFlashEEPROM, "Erase both flash and EEPROM");
ToolTips.SetToolTip(cbDoNotWrite, "Don't write anything, used for debugging AVRDUDE");
ToolTips.SetToolTip(txtLFuse, "Low fuse");
ToolTips.SetToolTip(txtHFuse, "High fuse");
ToolTips.SetToolTip(txtEFuse, "Extended fuse");
ToolTips.SetToolTip(txtLock, "Lock bits");
ToolTips.SetToolTip(btnFlashGo, "Only write/read/verify flash");
ToolTips.SetToolTip(btnEEPROMGo, "Only write/read/verify EEPROM");
ToolTips.SetToolTip(btnWriteFuses, "Write fuses now");
ToolTips.SetToolTip(btnWriteLock, "Write lock now");
ToolTips.SetToolTip(btnReadFuses, "Read fuses now");
ToolTips.SetToolTip(btnReadLock, "Read lock now");
ToolTips.SetToolTip(cbSetFuses, "Write fuses when programming");
ToolTips.SetToolTip(cbSetLock, "Write lock when programming");
// Load saved presets
presets = new Presets(this);
presets.load();
presets.setDataSource(cmbPresets);
// Enable/disable tool tips based on saved config
ToolTips.Active = Config.Prop.toolTips;
ready = true;
// If a preset has not been specified by the command line then use the last used preset
// Credits:
// Uwe Tanger (specifing preset in command line)
// neptune (sticky presets)
if (presetToLoad == null)
{
presetToLoad = Config.Prop.preset;
}
// Load preset
PresetData p = presets.presets.Find(s => s.name == presetToLoad);
cmbPresets.SelectedItem = (p != null) ? p : presets.presets.Find(s => s.name == "Default");
// Check for updates
UpdateCheck.check.checkNow();
}