// this should listen for a machine configuration change event
// so it can automatically set up for the correct screens
public static DisplayManager Instance()
{
if (m_instance == null)
{
m_instance = new DisplayManager();
}
return m_instance;
}
/// <summary>
/// The reason this is here is to make sure that the
/// monitor X/Y size matches with what is detected with the system
/// saving the monitor x/y res and reloading it has caused confusion, causing users to
/// have to remove, then re-add the indicated monitor
/// </summary>
private void CorrectMonitorConfig()
{
foreach (MonitorConfig mc in m_lstMonitorconfigs)
{
int xres = 0, yres = 0;
if (DisplayManager.Instance().GetMonitorResoultion(mc.Monitorid, ref xres, ref yres))
{
mc.m_XDLPRes = xres;
mc.m_YDLPRes = yres;
}
}
}
public bool SendProjCommand(string displayname, string commandname)
{
try
{
// get the projector command for 'on'
// ACER_ON
ProjectorCommand pcmd = UVDLPApp.Instance().m_proj_cmd_lst.FindByName(commandname);
if (pcmd != null)
{
DeviceDriver dd = DisplayManager.Instance().FindDisplaySerialPortDriverByName(displayname);
if (dd != null)
{
if (dd.Connected)
{
byte[] data = pcmd.GetBytes();
dd.Write(data, data.Length);
return(true);
}
else
{
DebugLogger.Instance().LogError("Projector Driver not connected");
}
}
else
{
DebugLogger.Instance().LogError("Projector Driver not found");
}
}
else
{
DebugLogger.Instance().LogError("Projector command not found");
}
}
catch (Exception ex)
{
DebugLogger.Instance().LogError(ex);
}
return(false);
}
public void DoAppStartup()
{
m_dispmgr = DisplayManager.Instance();// initialze the displays
m_apppath = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location);
//get the path separater
if (RunningPlatform() == Platform.Windows)
{
m_pathsep = "\\";
}
else
{
m_pathsep = "/";
}
// define some default paths
m_PathMachines = m_apppath + m_pathsep + "Machines"; // use full paths - SHS
m_PathProfiles = m_apppath + m_pathsep + "Profiles";
// set up directories if they don't exist
if (!Directory.Exists(m_PathMachines))
{
Utility.CreateDirectory(m_PathMachines);
}
if (!Directory.Exists(m_PathProfiles))
{
Utility.CreateDirectory(m_PathProfiles);
}
if (!m_appconfig.Load(m_apppath + m_pathsep + m_appconfigname)) // use full path - SHS
{
m_appconfig.CreateDefault();
m_appconfig.Save(m_apppath + m_pathsep + m_appconfigname); // use full path - SHS
}
// this will check and make sure the default machines have been created
CheckAndCreateDefaultMachines();
//load the current machine configuration file
if (!m_printerinfo.Load(m_appconfig.m_curmachineeprofilename))
{
// m_printerinfo.Save(m_appconfig.m_curmachineeprofilename);
DebugLogger.Instance().LogError("Cannot Load Machine Profile " + m_appconfig.m_curmachineeprofilename);
}
// machine configuration was just loaded here.
RaiseAppEvent(eAppEvent.eMachineTypeChanged, ""); // notify the gui to set up correctly
//load the projector command list
if (!LoadProjectorCommands(m_appconfig.ProjectorCommandsFile))
{
SaveProjectorCommands(m_appconfig.ProjectorCommandsFile);
}
//load the current slicing profile
if (!m_buildparms.Load(m_appconfig.m_cursliceprofilename))
{
m_buildparms.CreateDefault();
m_buildparms.Save(m_appconfig.m_cursliceprofilename);
}
// set up the drivers
SetupDriver();
//SetupDriverProjector();
// load the support configuration
if (!LoadSupportConfig(m_appconfig.SupportConfigName))
{
SaveSupportConfig(m_appconfig.SupportConfigName);
}
//load the license keys
LoadLicenseKeys();
//look for plug-ins and validate licensing
ScanForPlugins();
//look for 'lite' plugins
ScanForPluginsLite();
// validate those loaded plugins against license keys
CheckLicensing();
// initialize the plugins, the main form will send a secondary init after the main app gui is created
PerformPluginCommand("InitCommand", true);
m_sc = new ServerContact();
m_sc.ServerContactEvenet += new ServerContact.Servercontacted(m_sc_ServerContactEvent);
m_sc.UpdateRegInfo();
m_undoer.RegisterCallback();
}
public void DoAppStartup()
{
m_dispmgr = DisplayManager.Instance();// initialze the displays
m_apppath = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location);
//get the path separater
if (RunningPlatform() == Platform.Windows)
{
m_pathsep = "\\";
}
else
{
m_pathsep = "/";
}
// define some default paths
m_PathMachines = m_apppath + m_pathsep + "Machines"; // use full paths - SHS
m_PathProfiles = m_apppath + m_pathsep + "Profiles";
// set up directories if they don't exist
if (!Directory.Exists(m_PathMachines))
{
Utility.CreateDirectory(m_PathMachines);
}
if (!Directory.Exists(m_PathProfiles))
{
Utility.CreateDirectory(m_PathProfiles);
}
if (!m_appconfig.Load(m_apppath + m_pathsep + m_appconfigname)) // use full path - SHS
{
m_appconfig.CreateDefault();
m_appconfig.Save(m_apppath + m_pathsep + m_appconfigname); // use full path - SHS
}
// this will check and make sure the default machines have been created
CheckAndCreateDefaultMachines();
//load the current machine configuration file
if (!m_printerinfo.Load(m_appconfig.m_curmachineeprofilename))
{
// m_printerinfo.Save(m_appconfig.m_curmachineeprofilename);
DebugLogger.Instance().LogError("Cannot Load Machine Profile " + m_appconfig.m_curmachineeprofilename);
}
// machine configuration was just loaded here.
RaiseAppEvent(eAppEvent.eMachineTypeChanged, ""); // notify the gui to set up correctly
//load the projector command list
if (!LoadProjectorCommands(m_appconfig.ProjectorCommandsFile))
{
SaveProjectorCommands(m_appconfig.ProjectorCommandsFile);
}
//load the current slicing profile
if (!m_buildparms.Load(m_appconfig.m_cursliceprofilename))
{
m_buildparms.CreateDefault();
m_buildparms.Save(m_appconfig.m_cursliceprofilename);
}
// set up the drivers
SetupDriver();
//SetupDriverProjector();
// load the support configuration
if (!LoadSupportConfig(m_appconfig.SupportConfigName))
{
SaveSupportConfig(m_appconfig.SupportConfigName);
}
//load the license keys
LoadLicenseKeys();
//look for plug-ins and validate licensing
ScanForPlugins();
// validate those loaded plugins against license keys
CheckLicensing();
// initialize the plugins, the main form will send a secondary init after the main app gui is created
PerformPluginCommand("InitCommand", true);
m_sc = new ServerContact();
m_sc.ServerContactEvenet += new ServerContact.Servercontacted(m_sc_ServerContactEvent);
m_sc.UpdateRegInfo();
m_undoer.RegisterCallback();
}
public void DoAppStartup()
{
m_dispmgr = DisplayManager.Instance();// initialze the displays
m_apppath = System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location);
//get the path separater
if (RunningPlatform() == Platform.Windows)
{
m_pathsep = "\\";
}
else
{
m_pathsep = "/";
}
// define some default paths
m_PathMachines = m_apppath + m_pathsep + "Machines"; // use full paths - SHS
m_PathProfiles = m_apppath + m_pathsep + "Profiles";
// set up directories if they don't exist
if (!Directory.Exists(m_PathMachines))
{
Utility.CreateDirectory(m_PathMachines);
}
if (!Directory.Exists(m_PathProfiles))
{
Utility.CreateDirectory(m_PathProfiles);
}
if (!m_appconfig.Load(m_apppath + m_pathsep + m_appconfigname)) // use full path - SHS
{
m_appconfig.CreateDefault();
m_appconfig.Save(m_apppath + m_pathsep + m_appconfigname); // use full path - SHS
}
// this will check and make sure the default machines have been created
CheckAndCreateDefaultMachines();
//load the current machine configuration file
if (!m_printerinfo.Load(m_appconfig.m_curmachineeprofilename))
{
// m_printerinfo.Save(m_appconfig.m_curmachineeprofilename);
DebugLogger.Instance().LogError("Cannot Load Machine Profile " + m_appconfig.m_curmachineeprofilename);
}
// machine configuration was just loaded here.
RaiseAppEvent(eAppEvent.eMachineTypeChanged, ""); // notify the gui to set up correctly
//load the projector command list
if (!LoadProjectorCommands(m_appconfig.ProjectorCommandsFile))
{
SaveProjectorCommands(m_appconfig.ProjectorCommandsFile);
}
//load the current slicing profile
if (!m_buildparms.Load(m_appconfig.m_cursliceprofilename))
{
m_buildparms.CreateDefault();
m_buildparms.Save(m_appconfig.m_cursliceprofilename);
}
else
{
m_buildparms.CreateDefault();
m_buildparms.Load(m_appconfig.m_cursliceprofilename);
}
// set up the drivers
SetupDriver();
//SetupDriverProjector();
// load the support configuration
if (!LoadSupportConfig(m_appconfig.SupportConfigName))
{
SaveSupportConfig(m_appconfig.SupportConfigName);
}
//load the license keys
LoadLicenseKeys();
//look for plug-ins and validate licensing
ScanForPlugins();
//look for 'lite' plugins
ScanForPluginsLite();
// validate those loaded plugins against license keys
CheckLicensing();
// initialize the plugins, the main form will send a secondary init after the main app gui is created
PerformPluginCommand("InitCommand", true);
m_sc = new ServerContact();
m_sc.ServerContactEvenet += new ServerContact.Servercontacted(m_sc_ServerContactEvent);
//contacting Server twise?? commenting this out for now
//m_sc.UpdateRegInfo();
m_undoer.RegisterCallback();
// pack all 2d gl images
//m_2d_graphics.GenereteUserTexture();
//load Rsource files
//this is not good way to load resource files. but the problem is visual studio cant generate auto-generation code for names with dot "."
resman = new ResourceManager("UV_DLP_3D_Printer.Resource.en", typeof(UVDLPApp).Assembly);
cul = CultureInfo.CreateSpecificCulture("");
if (UVDLPApp.Instance().m_appconfig.m_Selected_Language == "es")
{
resman = new ResourceManager("UV_DLP_3D_Printer.Resource.es", typeof(UVDLPApp).Assembly);
cul = CultureInfo.CreateSpecificCulture("");
}
else if (UVDLPApp.Instance().m_appconfig.m_Selected_Language == "en")
{
resman = new ResourceManager("UV_DLP_3D_Printer.Resource.en", typeof(UVDLPApp).Assembly);
cul = CultureInfo.CreateSpecificCulture("");
}
else
{
resman = new ResourceManager("UV_DLP_3D_Printer.Resource.en", typeof(UVDLPApp).Assembly);
cul = CultureInfo.CreateSpecificCulture("");
}
}