protected void RaiseDeviceMessageEvent(DeviceDriver device, string message, object data)
{
if (DeviceMessages != null)
{
DeviceMessages(device, message, data);
}
}
protected void RaiseDeviceStatus(DeviceDriver device, eDeviceStatus status)
{
if (DeviceStatus != null)
{
DeviceStatus(device, status);
}
}
protected void RaiseDataReceivedEvent(DeviceDriver device, byte[] data, int length)
{
if (DataReceived != null)
{
DataReceived(device, data, length);
}
}
void DataReceived(DeviceDriver driver, byte[] data, int len)
{
if (InvokeRequired)
{
BeginInvoke(new MethodInvoker(delegate() { DataReceived(driver, data, len); }));
}
else
{
String s = ASCIIEncoding.ASCII.GetString(data);
txtReceived.Text += s + "\r\n";
}
}
public void ResumePrint()
{
m_paused = false;
m_state = BuildManager.STATE_DO_NEXT_LAYER;
StartBuildTimer();
RaiseStatusEvent(eBuildStatus.eBuildResumed, "Next Layer");
Drivers.DeviceDriver dr = UVDLPApp.Instance().m_deviceinterface.Driver;
string resumecmd = UVDLPApp.Instance().m_printerinfo.GetStringVar("ResumeCommand");
if (resumecmd.Length > 0)
{
UVDLPApp.Instance().m_deviceinterface.SendCommandToDevice(resumecmd);
}
}
public void PausePrint()
{
m_paused = true;
m_state = STATE_IDLE;
StopBuildTimer();
RaiseStatusEvent(eBuildStatus.eBuildPaused, "Print Paused");
// special coding for Elite Image Works
// in the future, this should be pulled from the machine config file
// special commands or something...
Drivers.DeviceDriver dr = UVDLPApp.Instance().m_deviceinterface.Driver;
string pausecmd = UVDLPApp.Instance().m_printerinfo.GetStringVar("PauseCommand");
if (pausecmd.Length > 0)
{
UVDLPApp.Instance().m_deviceinterface.SendCommandToDevice(pausecmd);
}
}
public void LineReceived(DeviceDriver device, string line)
{
// parse for temperature data
//convert to string
string ln = line.Trim().ToUpper();
//ok T:201 B:117
String[] parts = line.Split(' '); // split on spaces
bool temp = false;
if (parts.Length > 1) // if this is more than just an 'ok'
{
foreach (string part in parts)
{
try
{
//part = part.ToUpper();
if (part.StartsWith("T:"))
{
string[] tmp = part.Split(':');
EXT0_Temp = double.Parse(tmp[1]);
temp = true;
}
if (part.StartsWith("B:"))
{
string[] tmp = part.Split(':');
HBP_Temp = double.Parse(tmp[1]);
temp = true;
}
if (temp)
{
//update the gui
UpdateForm();
}
}
catch (Exception ex)
{
DebugLogger.Instance().LogError(ex.Message);
}
}
}
}
/*
public void Configure(ConnectionConfig cc,int idx)
{
m_lstprojectors[idx].Configure(cc);
}
*/
/*
public void ConfigureProjector(ConnectionConfig cc)
{
DriverProjector.Configure(cc);
}
*/
public void DriverDeviceStatusEvent(DeviceDriver device, eDeviceStatus status)
{
switch (status)
{
case eDeviceStatus.eError:
if (StatusEvent != null)
{
StatusEvent(ePIStatus.eError, "I/O Error");
}
break;
case eDeviceStatus.eConnect:
if (StatusEvent != null)
{
StatusEvent(ePIStatus.eConnected, "Connected");
}
break;
case eDeviceStatus.eDisconnect:
if (StatusEvent != null)
{
StatusEvent(ePIStatus.eDisconnected, "Disconnected");
}
break;
}
}
public void AddDriver(DeviceDriver d)
{
m_lstprojectors.Add(d);
//add some events here..
d.DataReceived += new DeviceDriver.DataReceivedEvent(DriverDataReceivedEvent);
d.DeviceStatus += new DeviceDriver.DeviceStatusEvent(DriverDeviceStatusEvent);
}
private bool m_ready; // ready to send a command
#endregion Fields
#region Constructors
public DeviceInterface()
{
m_projector = null;
m_driver = null;
m_ready = true;
m_databufA = null;// new byte[BUFF_SIZE];
m_databufB = null;// new byte[BUFF_SIZE];
}
// this is called when we receive data from the device driver
void DriverDataReceivedEvent(DeviceDriver device, byte[] data, int length)
{
// stop the watchdog timer
m_timeouttimer.Enabled = false;
// raise the data event
if (DataEvent != null)
{
DataEvent(device, data, length);
}
//raise a data event notifying that we're ready for the next command
if (StatusEvent != null)
{
StatusEvent(ePIStatus.eReady, "Ready");
}
}
public DeviceInterface()
{
m_timeoutms = DEF_TIMEOUT;
m_timeouttimer = new Timer();
m_timeouttimer.Elapsed += new ElapsedEventHandler(m_timeouttimer_Elapsed);
m_timeouttimer.Interval = m_timeoutms;
m_driver = null;
}
// this is called when we receive data from the device driver
// one or more full lines can be received here
void DriverDataReceivedEvent(DeviceDriver device, byte[] data, int length)
{
lock (lockobj)
{
try
{
m_ready = true;
// raise the data event
if (DataEvent != null)
{
DataEvent(device, data, length);
}
/*
//raise a data event notifying that we're ready for the next command
if (StatusEvent != null)
{
StatusEvent(ePIStatus.eReady, "Ready");
}
*/
// copy the data into the A buffer
int termpos = -1;
// copy the data into the 'A' buffer
// need to copy into the end of the A buffer
if (m_databufA == null)
{
m_databufA = CopyData(0, data, 0, length);
}
else
{
m_databufA = AddBuffers(m_databufA, data);
}
termpos = Term_Pos(m_databufA, m_databufA.Length);
while (termpos != -1)
{
m_databufB = CopyData(0, m_databufA, 0, termpos + 1);
string result = System.Text.Encoding.ASCII.GetString(m_databufB); // should this be ascii?
//lock (lockobj)
// {
m_ready = true;
// }
if (LineDataEvent != null)
{
LineDataEvent(device, result); // raise an event for each complete line we receive
}
m_databufB = CopyData(0, m_databufA, termpos + 1, (m_databufA.Length - (termpos + 1)));
m_databufA = CopyData(0, m_databufB, 0, m_databufB.Length);
termpos = Term_Pos(m_databufA, m_databufA.Length); // check again
}
}
catch (Exception)
{
// DebugLogger.Instance().LogError(ex.Message); // this is erroring on the null driver for some reason
}
}
}
protected void RaiseDataReceivedEvent(DeviceDriver device, byte[] data, int length)
{
if (DataReceived != null)
{
DataReceived(device, data, length);
}
}
// this is called when we receive data from the device driver
// one or more full lines can be received here
void DriverDataReceivedEvent(DeviceDriver device, byte[] data, int length)
{
lock (lockobj)
{
try
{
// m_ready = true; // not sure I should do this here, I think it may be the cause of the flow control issue
// raise the data event
if (DataEvent != null)
{
DataEvent(device, data, length);
}
if (m_alwaysready)
{
// don't go any further to parse responses and generate line data events
// alwaysready is true for EliteImageWorks driver
return;
}
// copy the data into the A buffer
int termpos = -1;
// copy the data into the 'A' buffer
// need to copy into the end of the A buffer
if (m_databufA == null)
{
m_databufA = CopyData(0, data, 0, length);
}
else
{
m_databufA = AddBuffers(m_databufA, data);
}
termpos = Term_Pos(m_databufA, m_databufA.Length);
while (termpos != -1)
{
m_databufB = CopyData(0, m_databufA, 0, termpos + 1);
string result = System.Text.Encoding.ASCII.GetString(m_databufB);
m_ready = true;
if (LineDataEvent != null)
{
LineDataEvent(device, result); // raise an event for each complete line we receive
}
m_databufB = CopyData(0, m_databufA, termpos + 1, (m_databufA.Length - (termpos + 1)));
m_databufA = CopyData(0, m_databufB, 0, m_databufB.Length);
termpos = Term_Pos(m_databufA, m_databufA.Length); // check again
}
}
catch (Exception)
{
// DebugLogger.Instance().LogError(ex.Message); // this is erroring on the null driver for some reason
}
}
}
protected void RaiseDeviceMessageEvent(DeviceDriver device, string message, object data)
{
if (DeviceMessages != null)
{
DeviceMessages(device, message, data);
}
}
// this is called when we receive data from the device driver
// one or more full lines can be received here
void DriverDataReceivedEvent(DeviceDriver device, byte[] data, int length)
{
try
{
// stop the watchdog timer
m_timeouttimer.Enabled = false; // disable the timer
// raise the data event
if (DataEvent != null)
{
DataEvent(device, data, length);
}
//raise a data event notifying that we're ready for the next command
if (StatusEvent != null)
{
StatusEvent(ePIStatus.eReady, "Ready");
}
string result = System.Text.Encoding.UTF8.GetString(data);
// split it into multiple lines
string[] lines = result.Split('\n');
foreach (string line in lines)
{
if (LineDataEvent != null)
{
LineDataEvent(device, line);
}
//now parse the response to look for temperature reporting events
//convert to string
string ln = line.Trim();
//ok T:201 B:117
String[] parts = line.Split(' '); // split on spaces
bool temp = false;
if (parts.Length > 1) // if this is more than just an 'ok'
{
try
{
foreach (string part in parts)
{
if (part.StartsWith("T"))
{
string[] tmp = part.Split(':');
m_Ext0Temp = double.Parse(tmp[1]);
temp = true;
}
if (part.StartsWith("B"))
{
string[] tmp = part.Split(':');
m_HBPtemp = double.Parse(tmp[1]);
temp = true;
}
}
}
catch (Exception ex) { }
}
if (temp)
{
if (StatusEvent != null)
{
StatusEvent(ePIStatus.eTemperatureData, "Temperatures read");
}
}
}
}
catch (Exception ex)
{
}
}
private bool m_ready; // ready to send a command
#endregion Fields
#region Constructors
public DeviceInterface()
{
m_lstprojectors = new List<DeviceDriver>();
m_driver = null;
m_ready = true;
m_databufA = null;// new byte[BUFF_SIZE];
m_databufB = null;// new byte[BUFF_SIZE];
m_alwaysready = false; // assume it's a generic driver that requires gcode response to be ready
}
void LineDataReceived(DeviceDriver driver, string line)
{
if (InvokeRequired)
{
BeginInvoke(new MethodInvoker(delegate() { LineDataReceived(driver, line); }));
}
else
{
line = line.Trim();
//sb.Insert(0, line);
txtReceived.Text += line + "\r\n";
//txtReceived.Refresh();
}
}
protected void RaiseDeviceStatus(DeviceDriver device,eDeviceStatus status)
{
if (DeviceStatus != null)
{
DeviceStatus(device,status);
}
}
void datareceivedev(DeviceDriver device, byte[] dat, int len)
{
string str = Utility.ByteArrayToString(dat);
DebugLogger.Instance().LogInfo(str);
}
