public void SaveResults(trans_calc_input_text strin, trans_calc_result_text result, string fileName)
{
TransCalcInput input = new TransCalcInput(tc);
input.ConvertTextToInput(strin);
using (StreamWriter sw = new StreamWriter(fileName))
{
sw.WriteLine("Input:\n");
sw.WriteLine($"Core size WxHxL : {strin.core_W} x {strin.core_H} x {strin.core_L} cm");
sw.WriteLine($"Ae, WxH : {strin.Ae_W} x {strin.Ae_H} cm");
if (strin.window_size != "")
{
sw.WriteLine($"Window size : {strin.window_size} mm");
}
if (input.common.mpath_l_cm > 0.0000001)
{
sw.WriteLine($"Mpath, WxH : {strin.mpath_W} x {strin.mpath_H} cm");
}
if (strin.Bmax != "")
{
sw.WriteLine($"Bmax : {strin.Bmax} T");
}
if (strin.H != "")
{
sw.WriteLine($"H : {strin.H} " + tc.HUnitlsLabel);
}
if (strin.permeability != "")
{
sw.WriteLine($"u/u0 : {strin.permeability}");
}
if (strin.I_ex != "")
{
sw.WriteLine($"Iex : {strin.I_ex} A");
}
sw.WriteLine($"L1/L2 coupling coeff : {strin.coupling_coeff}");
sw.WriteLine($"Stacking factor : {strin.stackingFactor}");
if (strin.insulationThickness != "")
{
sw.WriteLine($"Insulation : {strin.insulationThickness} mm");
}
if (strin.Vout != "")
{
string fullLoad = strin.isVoutAtFullLoad ? "(full load)" : "(idle)";
sw.WriteLine($"Vout : {strin.Vout} {fullLoad}");
}
if (strin.Iout_max != "")
{
sw.WriteLine($"Iout max : {strin.Iout_max} A");
}
sw.WriteLine($"Max temperature : {strin.maxTemp} " + tc.TempUnitsLabel);
if (strin.max_eq_R != "")
{
sw.WriteLine($"Max equivalent R : {strin.max_eq_R}");
}
sw.WriteLine();
sw.WriteLine($"Primary : {strin.awg1} AWG, Wfactor: {strin.wfactor1}, N: {strin.N1}, " +
$"N per layer: {strin.N_per_layer1} C.M. per amp: {strin.ampacity1}");
if (input.processSecondary)
{
sw.WriteLine($"Secondary : {strin.awg2} AWG, Wfactor: {strin.wfactor2}, N: {strin.N2}, " +
$"N per layer: {strin.N_per_layer2} C.M. per amp: {strin.ampacity2}");
}
sw.WriteLine($"\nMains: {input.common.Vin.ToString()}V / {input.common.Freq.ToString()}Hz");
sw.WriteLine("\n=== Results: =====================================\n");
sw.WriteLine("Primary:\n");
sw.WriteLine($"AWG : {result.AWG1}");
sw.WriteLine($"Turns : {result.N_1}");
sw.WriteLine($"Turns per layer : {result.N_per_layer_1}");
sw.WriteLine($"Total layers : {result.totalLayers_1}");
sw.WriteLine($"Last layer turns : {result.lastLayerTurns_1}");
sw.WriteLine($"Wire length : {result.length_m_1} m / {result.length_ft_1} ft");
sw.WriteLine($"Build-up : {result.buildup_mm_1} mm");
sw.WriteLine($"R : {result.R_1}");
if (result.mpath_l_m != Constants.EmptyValue)
{
sw.WriteLine($"Magnetic path : {result.mpath_l_m} m");
}
if (result.L_1 != Constants.EmptyValue)
{
sw.WriteLine($"L : {result.L_1} H");
}
sw.WriteLine($"Bmax : {result.B_max} T");
if (result.permeability != Constants.EmptyValue)
{
sw.WriteLine($"u/u0 : {result.permeability}");
}
if (result.H != Constants.EmptyValue)
{
sw.WriteLine($"H : {result.H} " + tc.HUnitlsLabel);
}
if (result.I_ex != Constants.EmptyValue)
{
sw.WriteLine($"Iex : {result.I_ex} A");
}
if (result.Ip_full_load != Constants.EmptyValue)
{
sw.WriteLine($"Ip, full load : {result.Ip_full_load} A");
}
if (result.awg_max_current_amp_1 != Constants.EmptyValue)
{
sw.WriteLine($"AWG max current : {result.awg_max_current_amp_1} A");
}
sw.WriteLine($"Weight : {result.weight_1} " + tc.MassUnitsLabel);
if (input.processSecondary)
{
sw.WriteLine("\nSecondary:\n");
sw.WriteLine($"AWG : {result.AWG2}");
sw.WriteLine($"Turns : {result.N_2}");
sw.WriteLine($"Turns per layer : {result.N_per_layer_2}");
sw.WriteLine($"Total layers : {result.totalLayers_2}");
sw.WriteLine($"Last layer turns : {result.lastLayerTurns_2}");
sw.WriteLine($"Wire length : {result.length_m_2} m / {result.length_ft_2} ft");
sw.WriteLine($"Build-up : {result.buildup_mm_2} mm");
sw.WriteLine($"R : {result.R_2}");
sw.WriteLine($"Total build-up : {result.total_thickness_mm} mm");
sw.WriteLine($"L : {result.L_2} H");
sw.WriteLine($"Vout idle : {result.Vout_idle} V");
sw.WriteLine($"Vout full load : {result.Vout_load} V");
sw.WriteLine($"Iout full load : {result.Iout_max} A");
sw.WriteLine($"AWG max current : {result.awg_max_current_amp_2} A");
sw.WriteLine($"Weight : {result.weight_2} " + tc.MassUnitsLabel);
sw.WriteLine($"\nTurns ratio : {result.turns_ratio}");
sw.WriteLine($"Wire c.s.a ratio : {result.wire_csa_ratio}");
sw.WriteLine($"Total weight : {result.wire_total_weight} " + tc.MassUnitsLabel);
sw.WriteLine($"Weight ratio : {result.wire_weight_ratio}");
sw.WriteLine($"Output Power : {result.power_VA} VA");
sw.WriteLine($"Total equivalent R : {result.total_eq_R}");
sw.WriteLine($"% Regulation : {result.regulation}");
}
if (result.warnings.Count > 0)
{
sw.WriteLine("\nWarnings:\n");
foreach (string msg in result.warnings)
{
sw.WriteLine(msg);
}
}
}
}
public void SaveResults(trans_calc_input_text strin, trans_calc_result_text result, string fileName)
{
_filePersistence.SaveResults(strin, result, fileName);
}
