/**
* Creates a new tile and adds it to the map.
* The tile gets added in the array, at the indexes of the coordinates.
* So we can get the tile back if we simply put in the coordinates in the multi-array.
*/
public void createTile(Point position, Sprite sprite)
{
Tile tile = new Tile(position, sprite);
this.Map[position.X, position.Y] = tile;
}
public Tile[,] generate(Vector2 size)
{
Tile[,] workingLevel = new Tile[(int)size.x, (int)size.y];
//Initalise the tiles as blank, first
for (int i = 0; i < size.x; i++)
{
for (int o = 0; o < size.y; o++)
{
workingLevel[i, o] = new Tile(new Vector2(i, o), 0);
}
}
//debug counter, to see how often the RDG fails an needs to start an operation again.
int dou = 0;
//Total amount of tiles in this level
int tiles = 0;
//next direction the coridoor is going
int nextSmallJob = 0;
//last Direction the corodor moved
int lastEvent = 0;
//Working tile coords
int wx = 0;
int wy = 0;
//temporary coridoor length
int tempCoridoorLength = 0;
//Temporary Bad counter
int badSpawns = 0;
//Iteration Counters
int cIterations = 0;
int rIterations = 0;
//max room size
int maxRoomWidth = (int)size.x / 5;
int maxRoomHeight = (int)size.y / 5;
//Number of good rooms
int goodRooms = 0;
//Making an Origin - pick a random origin, near-ish to the middle
wx = Program.Instance.random.Next(5, (int)size.x - 5);
wy = Program.Instance.random.Next(5, (int)size.y - 5);
//workingLevel[wx, wy].type = 1; //don't need to set that now we set the working sqaure for making a room, before making a room
Console.WriteLine("Origin: " + wx + "|" + wy);
//make the layout of the coridoors, until the level is at least 1/4 full
while (tiles < (size.x * size.y) / 4 && cIterations < 10000)
{
//making a coorroodoor
//Check if we want to make the coridor go in the same direction as last time
if (Program.Instance.random.Next(0, 7) == 1)
{
//no we don't, new direction (That might be the same as the old one anyway)
//and nextSmallJob was already assigned to the last one at the end of the last generation
nextSmallJob = Program.Instance.random.Next(0, 4);
}
Console.WriteLine("Working from:" + wx + "|" + wy);
Console.WriteLine("Next Move::" + nextSmallJob);
//check to see if it goes out of the bounds of the level
//then check to see if ahead is already a coridor
//then check to see if there is a coridore beside me now and ahead (on same side)
//finalls, same as above, on other side
bool badmove = false;
switch (nextSmallJob)
{
case 0:
//up
if (wy < 5)
{
//bad move, Edge of the world
Console.WriteLine("Bad move: Top of the world");
badmove = true;
}
// else if (workingLevel[wx, wy - 1].type != 0)
// {
//bad move, already occupied
// badmove = true;
// }
else if (workingLevel[wx - 1, wy].type == tileTypes.corridor && workingLevel[wx - 1, wy - 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
badmove = true;
}
else if (workingLevel[wx + 1, wy].type == tileTypes.corridor && workingLevel[wx + 1, wy - 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
badmove = true;
}
else
{
//good move, let's move the working cordinate
wy--;
}
break;
case 1:
//right
if (wx > size.x - 5)
{
//bad move, Edge of the world
Console.WriteLine("Bad move: Right of the world");
badmove = true;
}
// else if (workingLevel[wx + 1, wy].type != 0)
// {
//bad move, already occupied
// badmove = true;
// }
else if (workingLevel[wx, wy - 1].type == tileTypes.corridor && workingLevel[wx + 1, wy - 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
badmove = true;
}
else if (workingLevel[wx, wy + 1].type == tileTypes.corridor && workingLevel[wx + 1, wy + 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
badmove = true;
}
else if (workingLevel[wx, wy - 1].type == tileTypes.room && workingLevel[wx + 1, wy - 1].type == tileTypes.room)
{
//bad move, room next to me now, and after move
badmove = true;
}
wx++;
break;
case 2:
//down
if (wy > size.y - 5)
{
//bad move, Edge of the world
Console.WriteLine("Bad move: Bottom of the world");
badmove = true;
}
//else if (workingLevel[wx, wy + 1].type != 0)
// {
//bad move, already occupied
// badmove = true;
// }
else if (workingLevel[wx - 1, wy].type == tileTypes.corridor && workingLevel[wx - 1, wy + 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
badmove = true;
}
else if (workingLevel[wx + 1, wy].type == tileTypes.corridor && workingLevel[wx + 1, wy + 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
badmove = true;
}
else
{
//good move, let's move the working cordinate
wy++;
}
break;
case 3:
//left
if (wx < 5)
{
//bad move, Edge of the world
Console.WriteLine("Bad move: Left of the world");
badmove = true;
}
//else if (workingLevel[wx - 1, wy].type != 0)
//{
//bad move, already occupied
// badmove = true;
//}
else if (workingLevel[wx, wy - 1].type == tileTypes.corridor && workingLevel[wx - 1, wy - 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
badmove = true;
}
else if (workingLevel[wx, wy + 1].type == tileTypes.corridor && workingLevel[wx - 1, wy + 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
badmove = true;
}
else
{
//good move, let's move the working cordinate
wx--;
}
break;
}
if (badmove)
{
//make next small job (hopefully) not the same, so if it tries to do the same move
//which is likely, it won't go through the generation of this direction again (hopefully)
nextSmallJob = Program.Instance.random.Next(0, 4);
dou++;
badSpawns++;
if (badSpawns < 30)
{
badSpawns = 0;
bool good = false;
while (!good)
{
Console.WriteLine("STILLL GETTTINGGGGG STUCK IN A BAD CORRIDOR LOOOOOP");
wx = Program.Instance.random.Next(1, (int)size.x - 2);
wy = Program.Instance.random.Next(1, (int)size.y - 2);
if (workingLevel[wx, wy].type == tileTypes.corridor)
good = true;
}
}
}
else
{
//it was a "good" move, so let's make it a coridor
workingLevel[wx, wy].type = tileTypes.corridor;
tiles++;
tempCoridoorLength++;
lastEvent = nextSmallJob;
}
cIterations++;
}
while (goodRooms < ((int)size.x + (int)size.y) /10 )
{
//make some rooms!
//random width+height
int rw = Program.Instance.random.Next(2, maxRoomWidth);
int rh = Program.Instance.random.Next(2, maxRoomHeight);
//random position, that will always make a room not going out of the bounds!
wx = Program.Instance.random.Next(3, (int)size.x - (maxRoomWidth + 3));
wy = Program.Instance.random.Next(3, (int)size.y - (maxRoomHeight + 3));
Console.WriteLine("Worker origin: " + wx + "|" + wy);
Console.WriteLine("Proposed Room Size:" + rw + "|" + rh);
//room score
int roomScore = 0;
//Check to see if this place and size is a good place for a room
for (int i = wx; i < wx + rw; i++)
{
for (int o = wy; o < wy + rh; o++)
{
//if an adjacent cell is a room, remove a point
if (workingLevel[i + 1, o].type == tileTypes.room)
{
roomScore--;
}
if (workingLevel[i - 1, o].type == tileTypes.room)
{
roomScore--;
}
if (workingLevel[i, o + 1].type == tileTypes.room)
{
roomScore--;
}
if (workingLevel[i, o - 1].type == tileTypes.room)
{
roomScore--;
}
//if an adjacent cell is a coridoor, add a point
if (workingLevel[i + 1, o].type == tileTypes.corridor)
{
roomScore++;
}
if (workingLevel[i - 1, o].type == tileTypes.corridor)
{
roomScore++;
}
if (workingLevel[i, o + 1].type == tileTypes.corridor)
{
roomScore++;
}
if (workingLevel[i, o - 1].type == tileTypes.corridor)
{
roomScore++;
}
}
}
Console.WriteLine("RoomScore: " + roomScore);
if (roomScore > 5)
{
//make room from top left origin
for (int i = wx; i < wx + rw; i++)
{
for (int o = wy; o < wy + rh; o++)
{
if (workingLevel[i, o].type == tileTypes.corridor || workingLevel[i, o].type == tileTypes.room)
{
workingLevel[i, o].type = tileTypes.room;
}
else
{
workingLevel[i, o].type = tileTypes.room;
tiles++;
}
}
}
goodRooms++;
roomScore = 0;
}
rIterations++;
}
//debug, number of culled coridors
int culledCoridoors = 0;
//let's get rid of corridors that run along room edges!
//50 iterations
for (int cull = 0; cull < 10; cull++)
{
for (int i = 1; i < size.x - 2; i++)
{
for (int o = 1; o < size.y - 2; o++)
{
if (workingLevel[i, o].type == tileTypes.room)
{
if (workingLevel[i - 1, o].type == tileTypes.corridor && workingLevel[i - 1, o - 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
workingLevel[i - 1, o].type = tileTypes.room;
culledCoridoors++;
}
else if (workingLevel[i - 1, o].type == tileTypes.corridor && workingLevel[i - 1, o + 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
workingLevel[i - 1, o].type = tileTypes.room;
culledCoridoors++;
}
else if (workingLevel[i + 1, o].type == tileTypes.corridor && workingLevel[i + 1, o - 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
workingLevel[i + 1, o].type = tileTypes.room;
culledCoridoors++;
}
else if (workingLevel[i + 1, o].type == tileTypes.corridor && workingLevel[i + 1, o + 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
workingLevel[i + 1, o].type = tileTypes.room;
culledCoridoors++;
}
else if (workingLevel[i, o - 1].type == tileTypes.corridor && workingLevel[i - 1, o - 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
workingLevel[i, o - 1].type = tileTypes.room;
culledCoridoors++;
}
else if (workingLevel[i, o - 1].type == tileTypes.corridor && workingLevel[i + 1, o - 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
workingLevel[i, o - 1].type = tileTypes.room;
culledCoridoors++;
}
else if (workingLevel[i, o + 1].type == tileTypes.corridor && workingLevel[i + 1, o + 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
workingLevel[i, o + 1].type = tileTypes.room;
culledCoridoors++;
}
else if (workingLevel[i, o + 1].type == tileTypes.corridor && workingLevel[i - 1, o + 1].type == tileTypes.corridor)
{
//bad move, Coridoor next to me now, and after move
workingLevel[i, o + 1].type = tileTypes.room;
culledCoridoors++;
}
}
}
}
}
//So, culling the "parralell" corridors makes the rooms have one corridor cell inside that room that 9/10 does nothing
//here's a little fix to make those cells part of the room
for (int i = 1; i < size.x - 2; i++)
{
for (int o = 1; o < size.y - 2; o++)
{
if (workingLevel[i, o].type == tileTypes.corridor)
{
if (workingLevel[i + 1, o].type == tileTypes.room || workingLevel[i - 1, o].type == tileTypes.room)
{
if (workingLevel[i, o + 1].type == tileTypes.room || workingLevel[i, o - 1].type == tileTypes.room)
{
workingLevel[i, o].type = tileTypes.room;
culledCoridoors++;
}
}
}
}
}
//let's get rid of the deadends!
//total of 50 iterations
for (int deCull = 0; deCull < 50; deCull++)
{
for (int i = 1; i < size.x - 2; i++)
{
for (int o = 1; o < size.y - 2; o++)
{
int aCells = 0;
//check to see if the adjacent cells have stuff
if (workingLevel[i, o].type == tileTypes.corridor)
{
if (workingLevel[i + 1, o].type > 0)
{
aCells++;
}
if (workingLevel[i - 1, o].type > 0)
{
aCells++;
}
if (workingLevel[i, o + 1].type > 0)
{
aCells++;
}
if (workingLevel[i, o - 1].type > 0)
{
aCells++;
}
//if there's less than 2 stuff, cull
if (aCells < 2)
{
workingLevel[i, o].type = 0;
culledCoridoors++;
}
}
}
}
}
//debug, number of doors
int doors = 0;
//let's place some doors!
for (int i = 1; i < size.x - 2; i++)
{
for (int o = 1; o < size.y - 2; o++)
{
if (workingLevel[i, o].type == tileTypes.corridor)
{
bool makeDoor = false;
//check to see if the adjacent cells are rooms
//then if the opisite adjacent cel is a coridor
if (workingLevel[i + 1, o].type == tileTypes.corridor && workingLevel[i - 1, o].type == tileTypes.room)
{
makeDoor = true;
}
if (workingLevel[i + 1, o].type == tileTypes.room && workingLevel[i - 1, o].type == tileTypes.corridor)
{
makeDoor = true;
}
if (workingLevel[i, o + 1].type == tileTypes.corridor && workingLevel[i, o - 1].type == tileTypes.room)
{
makeDoor = true;
}
if (workingLevel[i, o + 1].type == tileTypes.room && workingLevel[i, o - 1].type == tileTypes.corridor)
{
makeDoor = true;
}
int aCells = 0;
//check to see if the adjacent cells have corridors
if (workingLevel[i + 1, o].type == tileTypes.corridor)
{
aCells++;
}
if (workingLevel[i - 1, o].type == tileTypes.corridor)
{
aCells++;
}
if (workingLevel[i, o + 1].type == tileTypes.corridor)
{
aCells++;
}
if (workingLevel[i, o - 1].type == tileTypes.corridor)
{
aCells++;
}
//if any of the potential doors are true
//and there's only the one adjacent coridoor
//make a 1/3 random to see if it makes a door
if (makeDoor && aCells == 1 && Program.Instance.random.Next(0, 3) == 1)
{
workingLevel[i, o] = new Door(new Vector2(i,o), tileTypes.door);
doors++;
}
}
}
}
//Now for features!
bool Done = false;
while (!Done)
{
wx = Program.Instance.random.Next(0, (int)size.x);
wy = Program.Instance.random.Next(0, (int)size.y);
if (workingLevel[wx, wy].type == tileTypes.room)
{
workingLevel[wx, wy].type = tileTypes.level_start;
Done = true;
}
}
Done = false;
while (!Done)
{
wx = Program.Instance.random.Next(0, (int)size.x);
wy = Program.Instance.random.Next(0, (int)size.y);
if (workingLevel[wx, wy].type == tileTypes.room)
{
workingLevel[wx, wy].type = tileTypes.level_end;
Done = true;
}
}
Done = false;
// create a writer and open the file
TextWriter tw = new StreamWriter(DateTime.Today.Day + " - Level" + size.x+"-"+size.y + ".txt");
// write a line of text to the file
string s = "Coridor Iterations: " + cIterations + Environment.NewLine +
"Room Iterations: " + rIterations + Environment.NewLine +
"Good Rooms: " + goodRooms + Environment.NewLine +
"Culled Corridors: " + culledCoridoors + Environment.NewLine +
"Doors: " + doors + Environment.NewLine +
"Doubles: " + dou + Environment.NewLine +
"Tiles: " + tiles + Environment.NewLine +
"Width: " + size.x + " Height: " +size.y;
Console.WriteLine(s);
tw.WriteLine(s + Environment.NewLine + Environment.NewLine + "Generated Map:");
//Build the 3D
//swapping around the order I usually do it, so the Text map comes out good
for (int o = 0; o < size.y; o++)
{
for (int i = 0; i < size.x; i++)
{
switch (workingLevel[i, o].type)
{
case tileTypes.wall:
tw.Write(" ");
break;
case tileTypes.corridor:
tw.Write("X");
break;
case tileTypes.room:
tw.Write("O");
break;
case tileTypes.door:
tw.Write("+");
break;
case tileTypes.level_start:
tw.Write("<");
break;
case tileTypes.level_end:
tw.Write(">");
break;
}
}
tw.Write(tw.NewLine);
}
tw.Close();
Console.WriteLine("end making level arraythingy");
return workingLevel;
}
public ArrayList placeMonsters(Tile[,] level, Vector2 size)
{
ArrayList r = new ArrayList();
int wx = 0;
int wy = 0;
bool Done = false;
while (!Done)
{
wx = Program.Instance.random.Next(0, (int)size.x);
wy = Program.Instance.random.Next(0, (int)size.y);
if (level[wx, wy].type == tileTypes.room)
{
Monster m = new Monster(new Vector2(wx, wy));
m.cRace = characterRaces.nonHuman;
m.setupCharacter();
Program.Instance.gameManager.addMessage("Mon HP:" + m.maxHP + " Mon Damage: " + m.drMeleeDamage.info());
r.Add(m);
m.writeCharacter("Mons" + Monster.unique);
m.make();
Done = true;
}
}
Done = false;
return r;
}
public Tile returnCell(int x, int y, int dir)
{
Tile ret = new Tile(new Vector2(1000, 1000), tileTypes.wall);
switch (dir)
{
case 0:
ret = tiles[x, y - 1];
break;
case 1:
ret = tiles[x + 1, y];
break;
case 2:
ret = tiles[x, y + 1];
break;
case 3:
ret = tiles[x - 1, y];
break;
}
return ret;
}
