/// <summary>
/// 向控制器发送控制命令
/// </summary>
/// <param name="Work"></param>
public void SetControllerWorks(CCommandQueueItem Command)
{
lock (queSendingCommands)
{
if (queSendingCommands.Count <= 10)
{
queSendingCommands.Enqueue(Command);
#if DEBUG
Trace.WriteLine(string.Format("Command Item Added >>> {0}", Command.ToString()));
Trace.WriteLine(string.Format("Commands remained {0}", queSendingCommands.Count.ToString()));
#endif
}
}
}
private void bgw_DoWork(object sender, DoWorkEventArgs e)
{
//int cdkey_daysleft = -1;
//DateTime cdkey_expired = DateTime.MinValue;
while (true)
{
bgw_RS232.ReportProgress(STAT_COMM_PORT_OPENING);
if (!mControlBoard.Open()) // 如果打开串口失败
{
strLastError = mControlBoard.LastError;
mBoardInfo.RS232Connected = false;
Thread.Sleep(1000);
/* 检查是否请求退出通讯过程 */
if (bgw_RS232.CancellationPending)
{
mControlBoard.Close();
return;
}
bgw_RS232.ReportProgress(STAT_COMM_PORT_INEXITSTENT);
Thread.Sleep(1000);
}
else
{
bgw_RS232.ReportProgress(STAT_COMM_PORT_OPENED);
mBoardInfo.RS232Connected = true; // 成功连接到控制箱
while (true)
{
Thread.Sleep(300);
/* 查询控制器各项参数 */
if (mControlBoard.QueryStatus(ref mBoardInfo)) // 查询状态成功
{
bgw_RS232.ReportProgress(STAT_COMM_QUERY_FINISHED);
}
else // 查询状态失败
{
queSendingCommands.Clear();
strLastError = mControlBoard.LastError;
bgw_RS232.ReportProgress(STAT_COMM_QUERY_ERR);
mControlBoard.Close();
Thread.Sleep(1000);
break; // 如果查询状态失败，重新连接串口
}
/******************** Send control commands in quene *****************/
CCommandQueueItem cmd = null;
lock (queSendingCommands)
{
if (queSendingCommands.Count > 0)
{
cmd = queSendingCommands.Dequeue();
}
}
if (cmd != null)
{
Thread.Sleep(100);
switch (cmd.Command)
{
case CCommandQueueItem.ENUM_CMD.Start:
mControlBoard.StartCuring(cmd.Channel);
break;
case CCommandQueueItem.ENUM_CMD.Stop:
mControlBoard.StopCuring(cmd.Channel);
break;
case CCommandQueueItem.ENUM_CMD.SetTemper:
mControlBoard.SetTemperature(cmd.Channel, cmd.Temperature);
break;
}
#if DEBUG
Trace.WriteLine(string.Format("Command Send >>> {0}", cmd.ToString()));
Trace.WriteLine(string.Format("Commands remained {0}", queSendingCommands.Count.ToString()));
#endif
}
/* 检查是否请求退出通讯过程 */
if (bgw_RS232.CancellationPending)
{
mControlBoard.Close();
return;
}
/******************************************************************/
/* 检查cdkey是否正确 */
//int cdkey_avaliable = CStaticMethods.CheckLicenseAvaliable(CPublicVariables.Configuration.MachineCode, CStaticMethods.GetActiveCode(), CPublicVariables.Configuration.CDKEY, out cdkey_expired, out cdkey_daysleft);
//if (cdkey_avaliable != 0) // CDKEY验证错误
//{
// bgw_RS232.ReportProgress(STAT_COMM_LIC_ERR, cdkey_avaliable);
// Thread.Sleep(1000);
// /* 控制器恢复到初始状态 */
// if (this.BoardInfo.ZeroPower == true)
// this.SetControllerWorks(CMD_ZERO_PWR_OFF); // 关闭零点电源
// if (this.BoardInfo.PreheaterStatus == true)
// this.SetControllerWorks(CMD_PREHEATER_OFF); // 关闭预加热
// if (this.BoardInfo.HeaterLevel != CControlBoardInfo.Enum_HeaterLevel.LOW) // 加热器调到最低档
// this.SetControllerWorks(CMD_HEATER_LEVEL_LOW);
// if (this.BoardInfo.FanOpened != 0) // 关闭降温风扇
// this.SetControllerWorks(CMD_COOL_FAN_OFF);
//}
//else
//{
// bgw_RS232.ReportProgress(STAAT_COMM_LIC_OK);
// /* 当前温度写入温度控制类，进行温度控制 */
// mTemperatureTunner.SetTemperature(mBoardInfo.MovingAverageTemperatureInCabin);
//}
if (mControlBoard.CheckPortChanged()) /* 检查串口号是否在系统设置里做了更改 */
{
mControlBoard.Close();
break; // 如果串口号更改了，则重新打开控制器
}
/* 检查是否请求退出通讯过程 */
if (bgw_RS232.CancellationPending)
{
mControlBoard.Close();
return;
}
}
}
}
}
/// <summary>
/// 向控制器发送控制命令
/// </summary>
/// <param name="Work"></param>
public void SetControllerWorks(CCommandQueueItem Command)
{
lock(queSendingCommands)
{
if (queSendingCommands.Count <= 10)
{
queSendingCommands.Enqueue(Command);
#if DEBUG
Trace.WriteLine(string.Format("Command Item Added >>> {0}", Command.ToString()));
Trace.WriteLine(string.Format("Commands remained {0}", queSendingCommands.Count.ToString()));
#endif
}
}
}
