public void Dispose() { FormatConverter?.Dispose(); FormatConverter = null; Image?.Dispose(); Image = null; }
private static Direct2D.Bitmap LoadFromFile(string filename, Direct2D.RenderTarget Direct2DTarget) { var factory = new WIC.ImagingFactory(); // Decode image var decoder = new WIC.BitmapDecoder(factory, filename, WIC.DecodeOptions.CacheOnLoad); var frameDecode = decoder.GetFrame(0); var source = new WIC.BitmapSource(frameDecode.NativePointer); var fc = new WIC.FormatConverter(factory); fc.Initialize( source, SharpDX.WIC.PixelFormat.Format32bppPBGRA, SharpDX.WIC.BitmapDitherType.None, null, 0.0f, SharpDX.WIC.BitmapPaletteType.Custom ); double dpX = 96.0f; double dpY = 96.0f; fc.GetResolution(out dpX, out dpY); Direct2D.BitmapProperties props = new Direct2D.BitmapProperties( new SharpDX.Direct2D1.PixelFormat(SharpDX.DXGI.Format.B8G8R8A8_UNorm, SharpDX.Direct2D1.AlphaMode.Premultiplied)); WIC.Bitmap bmp = new WIC.Bitmap(factory, fc, WIC.BitmapCreateCacheOption.CacheOnLoad); // Формируем изображения var Direct2DBitmap = SharpDX.Direct2D1.Bitmap.FromWicBitmap(Direct2DTarget, fc, props); // Cleanup factory.Dispose(); decoder.Dispose(); source.Dispose(); fc.Dispose(); return(Direct2DBitmap); }
private static d2.Bitmap Load(d2.DeviceContext device, wic.BitmapDecoder decoder) { var converter = new wic.FormatConverter(Factory); var frame = decoder.GetFrame(0); converter.Initialize(frame, wic.PixelFormat.Format32bppPRGBA); var bmp = d2.Bitmap.FromWicBitmap(device, converter); frame.Dispose(); decoder.Dispose(); converter.Dispose(); return(bmp); }
public static d2.Bitmap LoadBitmap(this d2.RenderTarget renderTarget, Stream stream) { var bitmapDecoder = new wic.BitmapDecoder(DXGraphicsService.FactoryImaging, stream, wic.DecodeOptions.CacheOnDemand); wic.BitmapFrameDecode bitmapFrameDecode = bitmapDecoder.GetFrame(0); var bitmapSource = new wic.BitmapSource(bitmapFrameDecode.NativePointer); var formatConverter = new wic.FormatConverter(DXGraphicsService.FactoryImaging); formatConverter.Initialize(bitmapSource, wic.PixelFormat.Format32bppPBGRA); d2.Bitmap bitmap = d2.Bitmap.FromWicBitmap(renderTarget, formatConverter); formatConverter.Dispose(); /* todo: check to see if I need to register to dispose of this later... Can't comment this out because server side rendering will crash */ //bitmapSource.Dispose(); bitmapFrameDecode.Dispose(); bitmapDecoder.Dispose(); return(bitmap); }
static void over() { var inputPath = "Input.png"; var outputPath = "output.png"; // 그래픽을 랜더링할 장비를 추가 - 3D or 2D var defaultDevice = new SharpDX.Direct3D11.Device(SharpDX.Direct3D.DriverType.Hardware, d3d.DeviceCreationFlags.VideoSupport | d3d.DeviceCreationFlags.BgraSupport | d3d.DeviceCreationFlags.None); var d3dDevice = defaultDevice.QueryInterface <d3d.Device1>(); //get a refer to the D3D 11.1 device var dxgiDevice = d3dDevice.QueryInterface <dxgi.Device1>(); //get a refer to the DXGI device var d2dDevice = new d2.Device(dxgiDevice); // DeviceContext를 초기화. D2D 렌더링 타겟이 될 것이고 모든 렌더링 작업을 허용 var d2dContext = new d2.DeviceContext(d2dDevice, d2.DeviceContextOptions.None); var dwFactory = new dw.Factory(); //D2D, WIC 둘 다 지원되는 픽셀 형식 지정 var d2PixelFormat = new d2.PixelFormat(dxgi.Format.R8G8B8A8_UNorm, d2.AlphaMode.Premultiplied); //RGBA형식 사용 var wicPixelFormat = wic.PixelFormat.Format32bppPRGBA; //이미지 로딩 var imagingFactory = new wic.ImagingFactory2(); var decoder = new wic.PngBitmapDecoder(imagingFactory); var inputStream = new wic.WICStream(imagingFactory, inputPath, NativeFileAccess.Read); decoder.Initialize(inputStream, wic.DecodeOptions.CacheOnLoad); //다이렉트2D가 사용할수 있도록 디코딩 var formatConverter = new wic.FormatConverter(imagingFactory); formatConverter.Initialize(decoder.GetFrame(0), wicPixelFormat); //기본 이미지를 D2D이미지로 로드 //var inputBitmap = d2.Bitmap1.FromWicBitmap(d2dContext, formatConverter, new d2.BitmapProperties1(d2PixelFormat)); //이미지 크기 저장 var inputImageSize = formatConverter.Size; var pixelWidth = inputImageSize.Width; var pixelHeight = inputImageSize.Height; //Effect1 : BitpmapSource - 디코딩된 이미지 데이터를 가져오고 BitmapSource 가져오기 var bitmapSourceEffect = new d2.Effects.BitmapSource(d2dContext); bitmapSourceEffect.WicBitmapSource = formatConverter; // Effect 2 : GaussianBlur - bitmapsource에 가우시안블러 효과 적용 var gaussianBlurEffect = new d2.Effects.GaussianBlur(d2dContext); gaussianBlurEffect.SetInput(0, bitmapSourceEffect.Output, true); gaussianBlurEffect.StandardDeviation = 5f; //overlay text setup var textFormat = new dw.TextFormat(dwFactory, "Arial", 15f); //draw a long text to show the automatic line wrapping var textToDraw = "sime ling text..." + "text" + "dddd"; //create the text layout - this imroves the drawing performance for static text // as the glyph positions are precalculated //윤곽선 글꼴 데이터에서 글자 하나의 모양에 대한 기본 단위를 글리프(glyph)라고 한다 var textLayout = new dw.TextLayout(dwFactory, textToDraw, textFormat, 300f, 1000f); SharpDX.Mathematics.Interop.RawColor4 color = new SharpDX.Mathematics.Interop.RawColor4(255, 255, 255, 1); var textBrush = new d2.SolidColorBrush(d2dContext, color); //여기서부터 다시 //render target setup //create the d2d bitmap description using default flags and 96 DPI var d2dBitmapProps = new d2.BitmapProperties1(d2PixelFormat, 96, 96, d2.BitmapOptions.Target | d2.BitmapOptions.CannotDraw); //the render target var d2dRenderTarget = new d2.Bitmap1(d2dContext, new Size2(pixelWidth, pixelHeight), d2dBitmapProps); d2dContext.Target = d2dRenderTarget; //associate bitmap with the d2d context //Drawing //slow preparations - fast drawing d2dContext.BeginDraw(); d2dContext.DrawImage(gaussianBlurEffect, new SharpDX.Mathematics.Interop.RawVector2(100f, 100f)); d2dContext.DrawTextLayout(new SharpDX.Mathematics.Interop.RawVector2(50f, 50f), textLayout, textBrush); d2dContext.EndDraw(); //Image save //delete the output file if it already exists if (System.IO.File.Exists(outputPath)) { System.IO.File.Delete(outputPath); } //use the appropiate overload to write either to tream or to a file var stream = new wic.WICStream(imagingFactory, outputPath, NativeFileAccess.Write); //select the image encoding format HERE var encoder = new wic.PngBitmapEncoder(imagingFactory); encoder.Initialize(stream); var bitmapFrameEncode = new wic.BitmapFrameEncode(encoder); bitmapFrameEncode.Initialize(); bitmapFrameEncode.SetSize(pixelWidth, pixelHeight); bitmapFrameEncode.SetPixelFormat(ref wicPixelFormat); //this is the trick to write d2d1 bitmap to WIC var imageEncoder = new wic.ImageEncoder(imagingFactory, d2dDevice); imageEncoder.WriteFrame(d2dRenderTarget, bitmapFrameEncode, new wic.ImageParameters(d2PixelFormat, 96, 96, 0, 0, pixelWidth, pixelHeight)); bitmapFrameEncode.Commit(); encoder.Commit(); //cleanup //dispose everything and free used resources bitmapFrameEncode.Dispose(); encoder.Dispose(); stream.Dispose(); textBrush.Dispose(); textLayout.Dispose(); textFormat.Dispose(); formatConverter.Dispose(); //gaussianBlurEffect.Dispose(); bitmapSourceEffect.Dispose(); d2dRenderTarget.Dispose(); inputStream.Dispose(); decoder.Dispose(); d2dContext.Dispose(); dwFactory.Dispose(); imagingFactory.Dispose(); d2dDevice.Dispose(); dxgiDevice.Dispose(); d3dDevice.Dispose(); defaultDevice.Dispose(); //save System.Diagnostics.Process.Start(outputPath); }
static void Main() { // input and output files are supposed to be in the program folder var inputPath = "Input.png"; var outputPath = "Output.png"; // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // INITIALIZATION ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // initialize the D3D device which will allow to render to image any graphics - 3D or 2D var defaultDevice = new SharpDX.Direct3D11.Device(SharpDX.Direct3D.DriverType.Hardware, d3d.DeviceCreationFlags.VideoSupport | d3d.DeviceCreationFlags.BgraSupport | d3d.DeviceCreationFlags.Debug); // take out the Debug flag for better performance var d3dDevice = defaultDevice.QueryInterface <d3d.Device1>(); // get a reference to the Direct3D 11.1 device var dxgiDevice = d3dDevice.QueryInterface <dxgi.Device>(); // get a reference to DXGI device var d2dDevice = new d2.Device(dxgiDevice); // initialize the D2D device var imagingFactory = new wic.ImagingFactory2(); // initialize the WIC factory // initialize the DeviceContext - it will be the D2D render target and will allow all rendering operations var d2dContext = new d2.DeviceContext(d2dDevice, d2.DeviceContextOptions.None); var dwFactory = new dw.Factory(); // specify a pixel format that is supported by both D2D and WIC var d2PixelFormat = new d2.PixelFormat(dxgi.Format.R8G8B8A8_UNorm, d2.AlphaMode.Premultiplied); // if in D2D was specified an R-G-B-A format - use the same for wic var wicPixelFormat = wic.PixelFormat.Format32bppPRGBA; // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // IMAGE LOADING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ var decoder = new wic.PngBitmapDecoder(imagingFactory); // we will load a PNG image var inputStream = new wic.WICStream(imagingFactory, inputPath, NativeFileAccess.Read); // open the image file for reading decoder.Initialize(inputStream, wic.DecodeOptions.CacheOnLoad); // decode the loaded image to a format that can be consumed by D2D var formatConverter = new wic.FormatConverter(imagingFactory); formatConverter.Initialize(decoder.GetFrame(0), wicPixelFormat); // load the base image into a D2D Bitmap //var inputBitmap = d2.Bitmap1.FromWicBitmap(d2dContext, formatConverter, new d2.BitmapProperties1(d2PixelFormat)); // store the image size - output will be of the same size var inputImageSize = formatConverter.Size; var pixelWidth = inputImageSize.Width; var pixelHeight = inputImageSize.Height; // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // EFFECT SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // Effect 1 : BitmapSource - take decoded image data and get a BitmapSource from it var bitmapSourceEffect = new d2.Effects.BitmapSource(d2dContext); bitmapSourceEffect.WicBitmapSource = formatConverter; // Effect 2 : GaussianBlur - give the bitmapsource a gaussian blurred effect var gaussianBlurEffect = new d2.Effects.GaussianBlur(d2dContext); gaussianBlurEffect.SetInput(0, bitmapSourceEffect.Output, true); gaussianBlurEffect.StandardDeviation = 5f; // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // OVERLAY TEXT SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ var textFormat = new dw.TextFormat(dwFactory, "Arial", 15f); // create the text format of specified font configuration // draw a long text to show the automatic line wrapping var textToDraw = "Some long text to show the drawing of preformatted " + "glyphs using DirectWrite on the Direct2D surface." + " Notice the automatic wrapping of line if it exceeds desired width."; // create the text layout - this improves the drawing performance for static text // as the glyph positions are precalculated var textLayout = new dw.TextLayout(dwFactory, textToDraw, textFormat, 300f, 1000f); var textBrush = new d2.SolidColorBrush(d2dContext, Color.LightGreen); // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // RENDER TARGET SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // create the d2d bitmap description using default flags (from SharpDX samples) and 96 DPI var d2dBitmapProps = new d2.BitmapProperties1(d2PixelFormat, 96, 96, d2.BitmapOptions.Target | d2.BitmapOptions.CannotDraw); // the render target var d2dRenderTarget = new d2.Bitmap1(d2dContext, new Size2(pixelWidth, pixelHeight), d2dBitmapProps); d2dContext.Target = d2dRenderTarget; // associate bitmap with the d2d context // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // DRAWING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // slow preparations - fast drawing: d2dContext.BeginDraw(); d2dContext.DrawImage(gaussianBlurEffect); d2dContext.DrawTextLayout(new Vector2(5f, 5f), textLayout, textBrush); d2dContext.EndDraw(); // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // IMAGE SAVING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // delete the output file if it already exists if (System.IO.File.Exists(outputPath)) { System.IO.File.Delete(outputPath); } // use the appropiate overload to write either to stream or to a file var stream = new wic.WICStream(imagingFactory, outputPath, NativeFileAccess.Write); // select the image encoding format HERE var encoder = new wic.PngBitmapEncoder(imagingFactory); encoder.Initialize(stream); var bitmapFrameEncode = new wic.BitmapFrameEncode(encoder); bitmapFrameEncode.Initialize(); bitmapFrameEncode.SetSize(pixelWidth, pixelHeight); bitmapFrameEncode.SetPixelFormat(ref wicPixelFormat); // this is the trick to write D2D1 bitmap to WIC var imageEncoder = new wic.ImageEncoder(imagingFactory, d2dDevice); imageEncoder.WriteFrame(d2dRenderTarget, bitmapFrameEncode, new wic.ImageParameters(d2PixelFormat, 96, 96, 0, 0, pixelWidth, pixelHeight)); bitmapFrameEncode.Commit(); encoder.Commit(); // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // CLEANUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // dispose everything and free used resources bitmapFrameEncode.Dispose(); encoder.Dispose(); stream.Dispose(); textBrush.Dispose(); textLayout.Dispose(); textFormat.Dispose(); formatConverter.Dispose(); gaussianBlurEffect.Dispose(); bitmapSourceEffect.Dispose(); d2dRenderTarget.Dispose(); inputStream.Dispose(); decoder.Dispose(); d2dContext.Dispose(); dwFactory.Dispose(); imagingFactory.Dispose(); d2dDevice.Dispose(); dxgiDevice.Dispose(); d3dDevice.Dispose(); defaultDevice.Dispose(); // show the result System.Diagnostics.Process.Start(outputPath); }
static void Main() { // input and output files are supposed to be in the program folder var inputPath = "Input.png"; var outputPath = "Output.png"; // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // INITIALIZATION ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // initialize the D3D device which will allow to render to image any graphics - 3D or 2D var defaultDevice = new SharpDX.Direct3D11.Device(SharpDX.Direct3D.DriverType.Hardware, d3d.DeviceCreationFlags.VideoSupport | d3d.DeviceCreationFlags.BgraSupport | d3d.DeviceCreationFlags.Debug); // take out the Debug flag for better performance var d3dDevice = defaultDevice.QueryInterface<d3d.Device1>(); // get a reference to the Direct3D 11.1 device var dxgiDevice = d3dDevice.QueryInterface<dxgi.Device>(); // get a reference to DXGI device var d2dDevice = new d2.Device(dxgiDevice); // initialize the D2D device var imagingFactory = new wic.ImagingFactory2(); // initialize the WIC factory // initialize the DeviceContext - it will be the D2D render target and will allow all rendering operations var d2dContext = new d2.DeviceContext(d2dDevice, d2.DeviceContextOptions.None); var dwFactory = new dw.Factory(); // specify a pixel format that is supported by both D2D and WIC var d2PixelFormat = new d2.PixelFormat(dxgi.Format.R8G8B8A8_UNorm, d2.AlphaMode.Premultiplied); // if in D2D was specified an R-G-B-A format - use the same for wic var wicPixelFormat = wic.PixelFormat.Format32bppPRGBA; // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // IMAGE LOADING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ var decoder = new wic.PngBitmapDecoder(imagingFactory); // we will load a PNG image var inputStream = new wic.WICStream(imagingFactory, inputPath, NativeFileAccess.Read); // open the image file for reading decoder.Initialize(inputStream, wic.DecodeOptions.CacheOnLoad); // decode the loaded image to a format that can be consumed by D2D var formatConverter = new wic.FormatConverter(imagingFactory); formatConverter.Initialize(decoder.GetFrame(0), wicPixelFormat); // load the base image into a D2D Bitmap //var inputBitmap = d2.Bitmap1.FromWicBitmap(d2dContext, formatConverter, new d2.BitmapProperties1(d2PixelFormat)); // store the image size - output will be of the same size var inputImageSize = formatConverter.Size; var pixelWidth = inputImageSize.Width; var pixelHeight = inputImageSize.Height; // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // EFFECT SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // Effect 1 : BitmapSource - take decoded image data and get a BitmapSource from it var bitmapSourceEffect = new d2.Effects.BitmapSource(d2dContext); bitmapSourceEffect.WicBitmapSource = formatConverter; // Effect 2 : GaussianBlur - give the bitmapsource a gaussian blurred effect var gaussianBlurEffect = new d2.Effects.GaussianBlur(d2dContext); gaussianBlurEffect.SetInput(0, bitmapSourceEffect.Output, true); gaussianBlurEffect.StandardDeviation = 5f; // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // OVERLAY TEXT SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ var textFormat = new dw.TextFormat(dwFactory, "Arial", 15f); // create the text format of specified font configuration // draw a long text to show the automatic line wrapping var textToDraw = "Some long text to show the drawing of preformatted " + "glyphs using DirectWrite on the Direct2D surface." + " Notice the automatic wrapping of line if it exceeds desired width."; // create the text layout - this improves the drawing performance for static text // as the glyph positions are precalculated var textLayout = new dw.TextLayout(dwFactory, textToDraw, textFormat, 300f, 1000f); var textBrush = new d2.SolidColorBrush(d2dContext, Color.LightGreen); // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // RENDER TARGET SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // create the d2d bitmap description using default flags (from SharpDX samples) and 96 DPI var d2dBitmapProps = new d2.BitmapProperties1(d2PixelFormat, 96, 96, d2.BitmapOptions.Target | d2.BitmapOptions.CannotDraw); // the render target var d2dRenderTarget = new d2.Bitmap1(d2dContext, new Size2(pixelWidth, pixelHeight), d2dBitmapProps); d2dContext.Target = d2dRenderTarget; // associate bitmap with the d2d context // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // DRAWING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // slow preparations - fast drawing: d2dContext.BeginDraw(); d2dContext.DrawImage(gaussianBlurEffect); d2dContext.DrawTextLayout(new Vector2(5f, 5f), textLayout, textBrush); d2dContext.EndDraw(); // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // IMAGE SAVING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // delete the output file if it already exists if (System.IO.File.Exists(outputPath)) System.IO.File.Delete(outputPath); // use the appropiate overload to write either to stream or to a file var stream = new wic.WICStream(imagingFactory, outputPath, NativeFileAccess.Write); // select the image encoding format HERE var encoder = new wic.PngBitmapEncoder(imagingFactory); encoder.Initialize(stream); var bitmapFrameEncode = new wic.BitmapFrameEncode(encoder); bitmapFrameEncode.Initialize(); bitmapFrameEncode.SetSize(pixelWidth, pixelHeight); bitmapFrameEncode.SetPixelFormat(ref wicPixelFormat); // this is the trick to write D2D1 bitmap to WIC var imageEncoder = new wic.ImageEncoder(imagingFactory, d2dDevice); imageEncoder.WriteFrame(d2dRenderTarget, bitmapFrameEncode, new wic.ImageParameters(d2PixelFormat, 96, 96, 0, 0, pixelWidth, pixelHeight)); bitmapFrameEncode.Commit(); encoder.Commit(); // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // CLEANUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // dispose everything and free used resources bitmapFrameEncode.Dispose(); encoder.Dispose(); stream.Dispose(); textBrush.Dispose(); textLayout.Dispose(); textFormat.Dispose(); formatConverter.Dispose(); gaussianBlurEffect.Dispose(); bitmapSourceEffect.Dispose(); d2dRenderTarget.Dispose(); inputStream.Dispose(); decoder.Dispose(); d2dContext.Dispose(); dwFactory.Dispose(); imagingFactory.Dispose(); d2dDevice.Dispose(); dxgiDevice.Dispose(); d3dDevice.Dispose(); defaultDevice.Dispose(); // show the result System.Diagnostics.Process.Start(outputPath); }
public void Dispose() { FormatConverter.Dispose(); }
public static MemoryStream Resize(System.IO.Stream source, int maxwidth, int maxheight, Action beforeDrawImage, Action afterDrawImage) { // initialize the D3D device which will allow to render to image any graphics - 3D or 2D var defaultDevice = new SharpDX.Direct3D11.Device(SharpDX.Direct3D.DriverType.Warp, d3d.DeviceCreationFlags.BgraSupport | d3d.DeviceCreationFlags.SingleThreaded | d3d.DeviceCreationFlags.PreventThreadingOptimizations); var d3dDevice = defaultDevice.QueryInterface<d3d.Device1>(); // get a reference to the Direct3D 11.1 device var dxgiDevice = d3dDevice.QueryInterface<dxgi.Device>(); // get a reference to DXGI device var d2dDevice = new d2.Device(dxgiDevice); // initialize the D2D device var imagingFactory = new wic.ImagingFactory2(); // initialize the WIC factory // initialize the DeviceContext - it will be the D2D render target and will allow all rendering operations var d2dContext = new d2.DeviceContext(d2dDevice, d2.DeviceContextOptions.None); var dwFactory = new dw.Factory(); // specify a pixel format that is supported by both D2D and WIC var d2PixelFormat = new d2.PixelFormat(dxgi.Format.R8G8B8A8_UNorm, d2.AlphaMode.Premultiplied); // if in D2D was specified an R-G-B-A format - use the same for wic var wicPixelFormat = wic.PixelFormat.Format32bppPRGBA; // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // IMAGE LOADING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ var decoder = new wic.BitmapDecoder(imagingFactory,source, wic.DecodeOptions.CacheOnLoad); // decode the loaded image to a format that can be consumed by D2D var formatConverter = new wic.FormatConverter(imagingFactory); formatConverter.Initialize(decoder.GetFrame(0), wicPixelFormat); // store the image size - output will be of the same size var inputImageSize = formatConverter.Size; // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // RENDER TARGET SETUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // create the d2d bitmap description using default flags (from SharpDX samples) and 96 DPI var d2dBitmapProps = new d2.BitmapProperties1(d2PixelFormat, 96, 96, d2.BitmapOptions.Target | d2.BitmapOptions.CannotDraw); //Calculate size var resultSize = MathUtil.ScaleWithin(inputImageSize.Width,inputImageSize.Height,maxwidth,maxheight); var newWidth = resultSize.Item1; var newHeight = resultSize.Item2; // the render target var d2dRenderTarget = new d2.Bitmap1(d2dContext, new Size2(newWidth, newHeight), d2dBitmapProps); d2dContext.Target = d2dRenderTarget; // associate bitmap with the d2d context var bitmapSourceEffect = new d2.Effects.BitmapSourceEffect(d2dContext); bitmapSourceEffect.WicBitmapSource = formatConverter; // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // DRAWING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ beforeDrawImage(); // slow preparations - fast drawing: d2dContext.BeginDraw(); d2dContext.Transform = Matrix3x2.Scaling(new Vector2((float)(newWidth / (float)inputImageSize.Width), (float)(newHeight / (float)inputImageSize.Height))); d2dContext.DrawImage(bitmapSourceEffect, d2.InterpolationMode.HighQualityCubic); d2dContext.EndDraw(); afterDrawImage(); // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // IMAGE SAVING ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ var ms = new MemoryStream(); // use the appropiate overload to write either to stream or to a file var stream = new wic.WICStream(imagingFactory,ms); // select the image encoding format HERE var encoder = new wic.JpegBitmapEncoder(imagingFactory); encoder.Initialize(stream); var bitmapFrameEncode = new wic.BitmapFrameEncode(encoder); bitmapFrameEncode.Initialize(); bitmapFrameEncode.SetSize(newWidth, newHeight); bitmapFrameEncode.SetPixelFormat(ref wicPixelFormat); // this is the trick to write D2D1 bitmap to WIC var imageEncoder = new wic.ImageEncoder(imagingFactory, d2dDevice); imageEncoder.WriteFrame(d2dRenderTarget, bitmapFrameEncode, new wic.ImageParameters(d2PixelFormat, 96, 96, 0, 0, newWidth, newHeight)); bitmapFrameEncode.Commit(); encoder.Commit(); // ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // CLEANUP ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ // dispose everything and free used resources bitmapFrameEncode.Dispose(); encoder.Dispose(); stream.Dispose(); formatConverter.Dispose(); bitmapSourceEffect.Dispose(); d2dRenderTarget.Dispose(); decoder.Dispose(); d2dContext.Dispose(); dwFactory.Dispose(); imagingFactory.Dispose(); d2dDevice.Dispose(); dxgiDevice.Dispose(); d3dDevice.Dispose(); defaultDevice.Dispose(); return ms; }
public MeshDeviceResources(Device device, SharpDX.WIC.ImagingFactory2 imagingFactory, Mesh mesh) { this.mesh = mesh; // create single vertex buffer var stream = new DataStream(mesh.vertices.Count * Mesh.VertexPositionNormalTexture.sizeInBytes, true, true); stream.WriteRange(mesh.vertices.ToArray()); stream.Position = 0; var vertexBufferDesc = new BufferDescription() { BindFlags = BindFlags.VertexBuffer, CpuAccessFlags = CpuAccessFlags.None, Usage = ResourceUsage.Default, SizeInBytes = mesh.vertices.Count * Mesh.VertexPositionNormalTexture.sizeInBytes, }; vertexBuffer = new SharpDX.Direct3D11.Buffer(device, stream, vertexBufferDesc); stream.Dispose(); vertexBufferBinding = new VertexBufferBinding(vertexBuffer, Mesh.VertexPositionNormalTexture.sizeInBytes, 0); foreach (var subset in mesh.subsets) { if (subset.material.textureFilename != null) { var decoder = new SharpDX.WIC.BitmapDecoder(imagingFactory, subset.material.textureFilename, SharpDX.WIC.DecodeOptions.CacheOnLoad); var bitmapFrameDecode = decoder.GetFrame(0); var stagingTextureDesc = new Texture2DDescription() { Width = bitmapFrameDecode.Size.Width, Height = bitmapFrameDecode.Size.Height, MipLevels = 1, ArraySize = 1, Format = SharpDX.DXGI.Format.B8G8R8A8_UNorm, SampleDescription = new SharpDX.DXGI.SampleDescription(1, 0), Usage = ResourceUsage.Dynamic, BindFlags = BindFlags.ShaderResource, CpuAccessFlags = CpuAccessFlags.Write }; var stagingTexture = new Texture2D(device, stagingTextureDesc); var textureDesc = new Texture2DDescription() { Width = bitmapFrameDecode.Size.Width, Height = bitmapFrameDecode.Size.Height, MipLevels = 0, ArraySize = 1, Format = SharpDX.DXGI.Format.B8G8R8A8_UNorm, SampleDescription = new SharpDX.DXGI.SampleDescription(1, 0), Usage = ResourceUsage.Default, BindFlags = BindFlags.ShaderResource | BindFlags.RenderTarget, CpuAccessFlags = CpuAccessFlags.None, OptionFlags = ResourceOptionFlags.GenerateMipMaps }; var texture = new Texture2D(device, textureDesc); // convert to 32 bpp var formatConverter = new FormatConverter(imagingFactory); formatConverter.Initialize(bitmapFrameDecode, SharpDX.WIC.PixelFormat.Format32bppBGR); var dataBox = device.ImmediateContext.MapSubresource(stagingTexture, 0, MapMode.WriteDiscard, SharpDX.Direct3D11.MapFlags.None); formatConverter.CopyPixels(dataBox.RowPitch, dataBox.DataPointer, dataBox.RowPitch * bitmapFrameDecode.Size.Height); device.ImmediateContext.UnmapSubresource(stagingTexture, 0); var resourceRegion = new ResourceRegion() { Left = 0, Top = 0, Right = bitmapFrameDecode.Size.Width, Bottom = bitmapFrameDecode.Size.Height, Front = 0, Back = 1, }; device.ImmediateContext.CopySubresourceRegion(stagingTexture, 0, resourceRegion, texture, 0); var textureRV = new ShaderResourceView(device, texture); device.ImmediateContext.GenerateMips(textureRV); decoder.Dispose(); formatConverter.Dispose(); bitmapFrameDecode.Dispose(); textureRVs[subset] = textureRV; } } }