/// <summary>
/// 写入指定块 数据
/// 0-19 每块4个字节
/// </summary>
/// <param name="epc"></param>
/// <param name="pwd"></param>
/// <param name="data"></param>
/// <param name="block_num"></param>
public static void WriteData(string epc, string pwd, string data, int block_num)
{
if (!IsOper)
{
throw new Exception("请先打开串口");
}
if (string.IsNullOrEmpty(epc) || string.IsNullOrEmpty(pwd) || string.IsNullOrEmpty(data))
{
throw new Exception("请补全信息");
}
if (pwd.Length != 8)
{
throw new Exception("密码长度要为8位");
}
if (data.Length % 4 != 0)
{
throw new Exception("密码长度要为4的倍数");
}
byte WrittenDataNum = 0;
byte ENum = Convert.ToByte(epc.Length / 4);
byte EPClen = Convert.ToByte(ENum * 2);
byte[] bEPC = new byte[ENum];
bEPC = RFIDResources.HexStringToByteArray(epc);
bPassWord = RFIDResources.HexStringToByteArray(pwd);
byte Wnum = Convert.ToByte(data.Length / 4);
byte[] WriteData = new byte[Wnum * 2];
WriteData = RFIDResources.HexStringToByteArray(data);
byte WriteDataLen = Convert.ToByte(Wnum * 2);
byte BNum = Convert.ToByte(block_num.ToString(), 16);
int flag = StaticClassReaderB.WriteCard_G2(ref ComAdr, bEPC,
RFIDResources.MemUser, BNum, WriteDataLen, WriteData,
bPassWord, 0, 0, 0, WrittenDataNum, EPClen, ref errcode, handle);
if (flag != 0)
{
if (errcode > -1)
{
throw new Exception(RFIDResources.GetErrorCodeDesc(errcode));
}
else
{
throw new Exception(RFIDResources.GetReturnCodeDesc(flag));
}
}
}
/// <summary>
/// 按块读数据
/// 0-19 每块4个字节
/// </summary>
/// <param name="epc"></param>
/// <param name="pwd"></param>
/// <param name="block_num"></param>
/// <returns></returns>
public static string ReadData(string epc, string pwd, int block_num)
{
if (!IsOper)
{
throw new Exception("请先打开串口");
}
if (string.IsNullOrEmpty(epc) || string.IsNullOrEmpty(pwd))
{
throw new Exception("请补全信息");
}
if (pwd.Length != 8)
{
throw new Exception("密码长度要为8位");
}
if (block_num < 0 || block_num > 19)
{
throw new Exception("读取地址必须在0-19之间");
}
byte ENum = Convert.ToByte(epc.Length / 4);
byte EPCLen = Convert.ToByte(epc.Length / 2);
byte[] bEPC = new byte[ENum];
bEPC = RFIDResources.HexStringToByteArray(epc);
bPassWord = RFIDResources.HexStringToByteArray(pwd);
byte BNum = Convert.ToByte(block_num.ToString(), 16);
byte[] bData = new byte[320];
int flag = StaticClassReaderB.ReadCard_G2(ref ComAdr, bEPC, RFIDResources.MemUser, BNum
, 1, bPassWord, 0, 0, 0, bData, EPCLen, ref errcode, handle);
if (flag != 0)
{
if (errcode > -1)
{
throw new Exception(RFIDResources.GetErrorCodeDesc(errcode));
}
else
{
throw new Exception(RFIDResources.GetReturnCodeDesc(flag));
}
}
byte[] daw = new byte[1 * 2];
Array.Copy(bData, daw, 1 * 2);
string str = RFIDResources.ByteArrayToHexString(daw);
return(str);
}
/// <summary>
/// 修改密码 销毁密码
/// 谨慎操作 用于销毁标签
/// </summary>
/// <param name="epc"></param>
/// <param name="old_pwd"></param>
/// <param name="new_pwd"></param>
public static void ChangeAdminPwd(string epc, string old_pwd, string new_pwd)
{
if (!IsOper)
{
throw new Exception("请先打开串口");
}
if (string.IsNullOrEmpty(epc) || string.IsNullOrEmpty(old_pwd) || string.IsNullOrEmpty(new_pwd))
{
throw new Exception("请补全信息");
}
if (old_pwd.Length != 8 || new_pwd.Length != 8)
{
throw new Exception("密码长度要为8位");
}
byte WrittenDataNum = 0;
byte ENum = Convert.ToByte(epc.Length / 4);
byte EPClen = Convert.ToByte(ENum * 2);
byte[] bEPC = new byte[ENum];
bEPC = RFIDResources.HexStringToByteArray(epc);
bPassWord = RFIDResources.HexStringToByteArray(old_pwd);
byte Wnum = Convert.ToByte(new_pwd.Length / 4);
byte[] WriteData = new byte[Wnum * 2];
WriteData = RFIDResources.HexStringToByteArray(new_pwd);
byte WriteDataLen = Convert.ToByte(Wnum * 2);
int flag = StaticClassReaderB.WriteCard_G2(ref ComAdr, bEPC,
RFIDResources.MemReser, 0x0, WriteDataLen, WriteData,
bPassWord, 0, 0, 0, WrittenDataNum, EPClen, ref errcode, handle);
if (flag != 0)
{
if (errcode > -1)
{
throw new Exception(RFIDResources.GetErrorCodeDesc(errcode));
}
else
{
throw new Exception(RFIDResources.GetReturnCodeDesc(flag));
}
}
SetRegiSec(epc, new_pwd);
}
/// <summary>
/// 打开指定端口
/// </summary>
/// <param name="port"></param>
public static void OpenCard(int port)
{
if (IsOper)
{
throw new Exception("串口已打开");
}
int flag = StaticClassReaderB.OpenComPort(port, ref ComAdr,
Convert.ToByte(RFIDResources._57600bps), ref handle);
if (flag == 0)
{
IsOper = true;
}
else
{
throw new Exception(RFIDResources.GetReturnCodeDesc(flag));
}
}
/// <summary>
/// 写标签
/// </summary>
/// <param name="epc"></param>
/// <param name="pwd"></param>
public static void WriteEPC(string epc, string pwd)
{
if (!IsOper)
{
throw new Exception("请先打开串口");
}
if (string.IsNullOrEmpty(epc))
{
throw new Exception("EPC不能为空");
}
if (epc.Length % 2 != 0)
{
throw new Exception("EPC长度必须是2的倍数");
}
if (string.IsNullOrEmpty(pwd))
{
throw new Exception("密码不能为空");
}
if (pwd.Length != 8)
{
throw new Exception("密码长度要为8位");
}
byte epcLen = Convert.ToByte(epc.Length / 2);
byte eNum = Convert.ToByte(epc.Length / 4);
byte[] EPC = new byte[eNum];
EPC = RFIDResources.HexStringToByteArray(epc);
bPassWord = RFIDResources.HexStringToByteArray(pwd);
int flag = StaticClassReaderB.WriteEPC_G2(ref ComAdr, bPassWord, EPC, epcLen,
ref errcode, handle);
if (flag != 0)
{
if (errcode > -1)
{
throw new Exception(RFIDResources.GetErrorCodeDesc(errcode));
}
else
{
throw new Exception(RFIDResources.GetReturnCodeDesc(flag));
}
}
}
private static void SetRegiSec(string epc, string pwd)
{
if (string.IsNullOrEmpty(epc) || string.IsNullOrEmpty(pwd))
{
throw new Exception("请补全信息");
}
if (pwd.Length != 8)
{
throw new Exception("密码长度要为8位");
}
byte Enum = Convert.ToByte(epc.Length / 4);
byte EPClen = Convert.ToByte(epc.Length / 2);
byte[] bEPC = new byte[Enum];
bEPC = RFIDResources.HexStringToByteArray(epc);
bPassWord = RFIDResources.HexStringToByteArray(pwd);
List <byte> lis = new List <byte>()
{
0x00, 0x01, 0x02, 0x04
};
foreach (byte b in lis)
{
int flag = StaticClassReaderB.SetCardProtect_G2(ref ComAdr, bEPC, b, 0x02, bPassWord
, 0, 0, 0, EPClen, ref errcode, handle);
if (flag != 0)
{
if (errcode > -1)
{
throw new Exception(RFIDResources.GetErrorCodeDesc(errcode));
}
else
{
throw new Exception(RFIDResources.GetReturnCodeDesc(flag));
}
}
Thread.Sleep(10);
}
}