/// <summary>
/// Checks the state of the object.
/// If it is outside print are it starts pulsing
/// </summary>
public void updateSTLState(STL stl)
{
FormPrinterSettings ps = Main.printerSettings;
stl.UpdateBoundingBox();
if (stl.xMin < ps.BedLeft || stl.yMin < ps.BedFront || stl.zMin < -0.001 || stl.xMax > ps.BedLeft + Main.printerSettings.PrintAreaWidth ||
stl.yMax > ps.BedFront + Main.printerSettings.PrintAreaDepth || stl.zMax > Main.printerSettings.PrintAreaHeight)
{
stl.outside = true;
if (Main.threeDSettings.pulseOutside.Checked && !stl.hasAnimationWithName("pulse"))
{
stl.addAnimation(new PulseAnimation("pulse", 0.03, 0.03, 0.03, 0.3));
}
}
else
{
stl.outside = false;
stl.removeAnimationWithName("pulse");
}
}
public Main()
{
executeHostCall = new executeHostCommandDelegate(this.executeHostCommand);
PiMakerKey = Custom.BaseKey; // Registry.CurrentUser.CreateSubKey("SOFTWARE\\PiMaker");
PiMakerKey.SetValue("installPath", Application.StartupPath);
if (Path.DirectorySeparatorChar != '\\' && IsRunningOnMac())
IsMac = true;
/*String[] parms = Environment.GetCommandLineArgs();
string lastcom = "";
foreach (string s in parms)
{
if (lastcom == "-home")
{
PiMakerKey.SetValue("installPath",s);
lastcom = "";
continue;
}
if (s == "-macosx") IsMac = true;
lastcom = s;
}*/
main = this;
trans = new Trans(Application.StartupPath + Path.DirectorySeparatorChar + "data" + Path.DirectorySeparatorChar + "translations");
SwitchButton.imageOffset = RegMemory.GetInt("onOffImageOffset", 0);
generator = new GCodeGenerator();
globalSettings = new GlobalSettings();
conn = new PrinterConnection();
printerSettings = new FormPrinterSettings();
conn.analyzer.start();
threeDSettings = new ThreeDSettings();
InitializeComponent();
editor = new PiMakerEditor();
editor.Dock = DockStyle.Fill;
tabGCode.Controls.Add(editor);
updateShowFilament();
RegMemory.RestoreWindowPos("mainWindow", this);
if (WindowState == FormWindowState.Maximized)
Application.DoEvents();
splitLog.SplitterDistance = RegMemory.GetInt("logSplitterDistance", splitLog.SplitterDistance);
splitInfoEdit.SplitterDistance = RegMemory.GetInt("infoEditSplitterDistance", Width - 470);
if (IsMono)
{
if (!IsMac)
{
foreach (ToolStripItem m in menu.Items)
{
m.Text = m.Text.Replace("&", null);
}
}
if (IsMac)
{
/*Application.Events.Quit += delegate (object sender, ApplicationEventArgs e) {
Application.Quit ();
e.Handled = true;
};
ApplicationEvents.Reopen += delegate (object sender, ApplicationEventArgs e) {
WindowState = FormWindowState.Normal;
e.Handled = true;
};*/
MinimumSize = new Size(500, 640);
tab.MinimumSize = new Size(500, 500);
splitLog.Panel1MinSize = 520;
splitLog.Panel2MinSize = 100;
splitLog.IsSplitterFixed = true;
//splitContainerPrinterGraphic.SplitterDistance -= 52;
splitLog.SplitterDistance = splitLog.Height - 100;
}
}
slicerToolStripMenuItem.Visible = false;
splitLog.Panel2Collapsed = !RegMemory.GetBool("logShow", true);
conn.eventConnectionChange += OnPrinterConnectionChange;
conn.eventPrinterAction += OnPrinterAction;
conn.eventJobProgress += OnJobProgress;
stlComposer1 = new STLComposer();
stlComposer1.Dock = DockStyle.Fill;
tabModel.Controls.Add(stlComposer1);
printPanel = new PrintPanel();
printPanel.Dock = DockStyle.Fill;
tabPrint.Controls.Add(printPanel);
printerSettings.formToCon();
logView = new LogView();
logView.Dock = DockStyle.Fill;
splitLog.Panel2.Controls.Add(logView);
skeinforge = new Skeinforge();
PrinterChanged(printerSettings.currentPrinterKey, true);
printerSettings.eventPrinterChanged += PrinterChanged;
// GCode print preview
threedview = new ThreeDControl();
threedview.Dock = DockStyle.Fill;
tabPage3DView.Controls.Add(threedview);
printPreview = new ThreeDView();
// printPreview.Dock = DockStyle.Fill;
// splitContainerPrinterGraphic.Panel2.Controls.Add(printPreview);
printPreview.SetEditor(false);
printPreview.autoupdateable = true;
printVisual = new GCodeVisual(conn.analyzer);
printVisual.liveView = true;
printPreview.models.AddLast(printVisual);
basicTitle = Text;
jobPreview = new ThreeDView();
// jobPreview.Dock = DockStyle.Fill;
// splitJob.Panel2.Controls.Add(jobPreview);
jobPreview.SetEditor(false);
jobPreview.models.AddLast(jobVisual);
editor.contentChangedEvent += JobPreview;
editor.commands = new Commands();
editor.commands.Read("default", "en");
UpdateHistory();
UpdateConnections();
Main.slic3r = new Slic3r();
slicer = new Slicer();
//toolShowLog_CheckedChanged(null, null);
updateShowFilament();
assign3DView();
history = new TemperatureHistory();
tempView = new TemperatureView();
tempView.Dock = DockStyle.Fill;
tabPageTemp.Controls.Add(tempView);
if (IsMono)
showWorkdirectoryToolStripMenuItem.Visible = false;
new SoundConfig();
stlComposer1.buttonSlice.Text = Trans.T1("L_SLICE_WITH", slicer.SlicerName);
// Customizations
if (Custom.GetBool("removeTestgenerator", false))
{
internalSlicingParameterToolStripMenuItem.Visible = false;
testCaseGeneratorToolStripMenuItem.Visible = false;
}
string titleAdd = Custom.GetString("titleAddition", "");
if (titleAdd.Length > 0)
{
int p = basicTitle.IndexOf(' ');
basicTitle = basicTitle.Substring(0, p) + titleAdd + basicTitle.Substring(p);
Text = basicTitle;
}
slicerPanel.UpdateSelection();
if (Custom.GetBool("removeUpdates", false))
checkForUpdatesToolStripMenuItem.Visible = false;
else
RHUpdater.checkForUpdates(true);
UpdateToolbarSize();
// Add languages
foreach (Translation t in trans.translations.Values)
{
ToolStripMenuItem item = new ToolStripMenuItem(t.language, null, languageSelected);
item.Tag = t;
languageToolStripMenuItem.DropDownItems.Add(item);
}
languageChanged += translate;
translate();
toolAction.Text = Trans.T("L_IDLE");
toolConnection.Text = Trans.T("L_DISCONNECTED");
}
/* public void RunSlice(string file,float centerx,float centery)
* {
* if (procConvert != null)
* {
* MessageBox.Show("Last slice job still running. Slicing of new job is canceled.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
* return;
* }
* SlicingInfo.Start("Slic3r");
* SlicingInfo.SetAction("Analyzing STL file ...");
* try
* {
* STL stl = new STL();
* stl.Load(file);
* stl.UpdateBoundingBox();
* if (stl.xMin > 0 && stl.yMin > 0 && stl.xMax < Main.printerSettings.PrintAreaWidth && stl.yMax < Main.printerSettings.PrintAreaDepth)
* {
* // User assigned valid position, so we use this
* centerx = stl.xMin + (stl.xMax - stl.xMin) / 2;
* centery = stl.yMin + (stl.yMax - stl.yMin) / 2;
* }
* stl.Clear();
* }
* catch (Exception e)
* {
* Main.conn.log(e.ToString(), false, 2);
* SlicingInfo.Stop();
* return;
* }
* SlicingInfo.SetAction("Slicing STL file ...");
* procConvert = new Process();
* try
* {
* string basedir = (string)Main.main.PiMakerKey.GetValue("installPath","");
* string exname = "slic3r.exe";
* if (Environment.OSVersion.Platform == PlatformID.Unix)
* exname = "bin"+Path.DirectorySeparatorChar+"slic3r";
* if (Main.IsMac)
* exname = "MacOS" + Path.DirectorySeparatorChar + "slic3r";
* string exe = basedir + Path.DirectorySeparatorChar + "Slic3r" + Path.DirectorySeparatorChar + exname;
* slicefile = file;
* string target = StlToGCode(file);
* if (File.Exists(target))
* File.Delete(target);
* procConvert.EnableRaisingEvents = true;
* procConvert.Exited += new EventHandler(ConversionExited);
* procConvert.StartInfo.FileName = Main.IsMono ? exe : wrapQuotes(exe);
* StringBuilder sb = new StringBuilder();
* sb.Append("--nozzle-diameter ");
* sb.Append(textNozzleDiameter.Text);
* sb.Append(" ");
* sb.Append(" -o ");
* sb.Append(wrapQuotes(StlToGCode(file)));
* sb.Append(" ");
* if (checkRelativeE.Checked)
* sb.Append("--use-relative-e-distances ");
* if (checkComments.Checked)
* sb.Append("--gcode-comments ");
* // else
* // sb.Append("--gcode-comments 0 ");
* sb.Append("-j ");
* sb.Append(textNumberOfThreads.Text);
* if (checkRandomizeStartingPoints.Checked)
* sb.Append(" --randomize-start");
* sb.Append(" --z-offset ");
* sb.Append(textZOffset.Text);
* sb.Append(" --filament-diameter ");
* sb.Append(textDiameter.Text);
* sb.Append(" --extrusion-multiplier ");
* sb.Append(textPackingDensity.Text);
* sb.Append(" --temperature ");
* sb.Append(textTemperature.Text);
* sb.Append(" --infill-speed ");
* sb.Append(textPrintFeedrate.Text);
* sb.Append(" --solid-infill-speed ");
* sb.Append(textSolidInfillSpeed.Text);
* sb.Append(" --travel-speed ");
* sb.Append(textTravelFeedrate.Text);
* sb.Append(" --bridge-speed ");
* sb.Append(textBridgeSpeed.Text);
* sb.Append(" --perimeter-speed ");
* sb.Append(textPerimeterFeedrate.Text);
* sb.Append(" --small-perimeter-speed ");
* sb.Append(textSmallPerimeterSpeed.Text);
* sb.Append(" --bridge-flow-ratio ");
* sb.Append(textBridgeFlowRatio.Text);
* sb.Append(" --layer-height ");
* sb.Append(textLayerHeight.Text);
* sb.Append(" --first-layer-speed ");
* sb.Append(textFirstLayerSpeed.Text);
* sb.Append(" --first-layer-height ");
* sb.Append(textFirstLayerHeight.Text);
* sb.Append(" --infill-every-layers ");
* sb.Append(textInfillEvery.Text);
* sb.Append(" --perimeters ");
* sb.Append(textPerimeters.Text);
* sb.Append(" --solid-layers ");
* sb.Append(textSolidLayers.Text);
* sb.Append(" --fill-density ");
* sb.Append(textFillDensity.Text);
* sb.Append(" --fill-angle ");
* sb.Append(textFillAngle.Text);
* sb.Append(" --fill-pattern ");
* sb.Append(comboFillPattern.SelectedItem);
* sb.Append(" --solid-fill-pattern ");
* sb.Append(comboSolidFillPattern.SelectedItem);
* sb.Append(" --retract-length ");
* sb.Append(textRetLength.Text);
* sb.Append(" --retract-speed ");
* sb.Append(textRetSpeed.Text);
* sb.Append(" --retract-restart-extra ");
* sb.Append(textRetExtraDistance.Text);
* sb.Append(" --retract-before-travel ");
* sb.Append(textRetMinTravel.Text);
* sb.Append(" --retract-lift ");
* sb.Append(textRetLift.Text);
* sb.Append(" --skirts ");
* sb.Append(textSkirtLoops.Text);
* sb.Append(" --skirt-distance ");
* sb.Append(textSkirtDistance.Text);
* sb.Append(" --skirt-height ");
* sb.Append(textSkirtHeight.Text);
* sb.Append(" --extrusion-width ");
* sb.Append(textExtrusionWidth.Text);
* sb.Append(" --brim-width ");
* sb.Append(textBrim.Text);
* sb.Append(" --support-material-threshold ");
* sb.Append(textOverhangTreshold.Text);
* sb.Append(" --support-material-pattern ");
* sb.Append(comboSupportPattern.SelectedItem);
* sb.Append(" --support-material-spacing ");
* sb.Append(textPatternSpacing.Text);
* sb.Append(" --support-material-angle ");
* sb.Append(textPatternAngle.Text);
* sb.Append(" --print-center ");
* sb.Append(centerx.ToString("0",GCode.format));
* sb.Append(",");
* sb.Append(centery.ToString("0", GCode.format));
* if (checkEnableCooling.Checked)
* {
* sb.Append(" --cooling --bridge-fan-speed ");
* sb.Append(textCoolBridgeFanSpeed.Text);
* sb.Append(" --disable-fan-first-layers ");
* sb.Append(textCoolDisableLayer.Text);
* sb.Append(" --fan-below-layer-time ");
* sb.Append(textCoolEnableBelow.Text);
* sb.Append(" --max-fan-speed ");
* sb.Append(textCoolMaxFanSpeed.Text);
* sb.Append(" --min-fan-speed ");
* sb.Append(textCoolMinFanSpeed.Text);
* sb.Append(" --min-print-speed ");
* sb.Append(textCoolMinPrintSpeed.Text);
* sb.Append(" --slowdown-below-layer-time ");
* sb.Append(textCoolSlowDownBelow.Text);
* }
* if (checkGenerateSupportMaterial.Checked)
* {
* sb.Append(" --support-material --support-material-tool " + comboSupportMaterialTool.SelectedIndex);
* }
* sb.Append(" --gcode-flavor ");
* switch (comboGCodeFlavor.SelectedIndex)
* {
* case 0:
* default:
* sb.Append("reprap");
* break;
* case 1:
* sb.Append("teacup");
* break;
* case 2:
* sb.Append("makerbot");
* break;
* case 3:
* sb.Append("mach3");
* break;
* case 4:
* sb.Append("no-extrusion");
* break;
* }
* sb.Append(" --first-layer-temperature ");
* sb.Append(textFirstLayerTemperature.Text);
* sb.Append(" --bed-temperature ");
* sb.Append(textBedTemperature.Text);
* sb.Append(" --first-layer-bed-temperature ");
* sb.Append(textFirstLayerBedTemperature.Text);
* if (checkFanAlwaysEnabled.Checked)
* {
* sb.Append(" --fan-always-on");
* }
* sb.Append(" --start-gcode ");
* sb.Append(wrapQuotes(basedir+Path.DirectorySeparatorChar+"empty.txt"));
* sb.Append(" --end-gcode ");
* sb.Append(wrapQuotes(basedir+Path.DirectorySeparatorChar+"empty.txt"));
* sb.Append(" ");
* sb.Append(wrapQuotes(file));
* Main.conn.log(sb.ToString(), false, 3);
* procConvert.StartInfo.Arguments = sb.ToString();
* procConvert.StartInfo.UseShellExecute = false;
* procConvert.StartInfo.RedirectStandardOutput = true;
* procConvert.OutputDataReceived += new DataReceivedEventHandler(OutputDataHandler);
* procConvert.StartInfo.RedirectStandardError = true;
* procConvert.ErrorDataReceived += new DataReceivedEventHandler(OutputDataHandler);
* procConvert.Start();
* // Start the asynchronous read of the standard output stream.
* procConvert.BeginOutputReadLine();
* procConvert.BeginErrorReadLine();
* //Main.main.tab.SelectedTab = Main.main.tabPrint;
* }
* catch (Exception e)
* {
* Main.conn.log(e.ToString(), false, 2);
* }
* }*/
/* public void RunSliceExternal(string file, float centerx, float centery)
* {
* if (procConvert != null)
* {
* MessageBox.Show("Last slice job still running. Slicing of new job is canceled.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
* return;
* }
* SlicingInfo.Start("External Slic3r");
* SlicingInfo.SetAction("Analyzing STL file ...");
* try
* {
* STL stl = new STL();
* stl.Load(file);
* stl.UpdateBoundingBox();
* if (stl.xMin > 0 && stl.yMin > 0 && stl.xMax < Main.printerSettings.PrintAreaWidth && stl.yMax < Main.printerSettings.PrintAreaDepth)
* {
* // User assigned valid position, so we use this
* centerx = stl.xMin + (stl.xMax - stl.xMin) / 2;
* centery = stl.yMin + (stl.yMax - stl.yMin) / 2;
* }
* stl.Clear();
* }
* catch (Exception e)
* {
* Main.conn.log(e.ToString(), false, 2);
* SlicingInfo.Stop();
* return;
* }
* SlicingInfo.SetAction("Slicing STL file ...");
* procConvert = new Process();
* try
* {
* string basedir = (string)Main.main.PiMakerKey.GetValue("installPath", "");
* string exname = "slic3r.exe";
* if (Environment.OSVersion.Platform == PlatformID.Unix)
* exname = "bin" + Path.DirectorySeparatorChar + "slic3r";
* if (Main.IsMac)
* exname = "MacOS" + Path.DirectorySeparatorChar + "slic3r";
* string exe = basedir + Path.DirectorySeparatorChar + "Slic3r" + Path.DirectorySeparatorChar + exname;
* if (File.Exists(BasicConfiguration.basicConf.ExternalSlic3rPath))
* exe = BasicConfiguration.basicConf.ExternalSlic3rPath;
*
* slicefile = file;
* string target = StlToGCode(file);
* if (File.Exists(target))
* File.Delete(target);
* procConvert.EnableRaisingEvents = true;
* procConvert.Exited += new EventHandler(ConversionExited);
* procConvert.StartInfo.FileName = Main.IsMono ? exe : wrapQuotes(exe);
* StringBuilder sb = new StringBuilder();
* sb.Append("--load ");
* sb.Append(wrapQuotes(BasicConfiguration.basicConf.ExternalSlic3rIniFile));
* sb.Append(" --print-center ");
* sb.Append(centerx.ToString("0", GCode.format));
* sb.Append(",");
* sb.Append(centery.ToString("0", GCode.format));
* sb.Append(" -o ");
* sb.Append(wrapQuotes(StlToGCode(file)));
* sb.Append(" ");
* sb.Append(wrapQuotes(file));
* procConvert.StartInfo.Arguments = sb.ToString();
* procConvert.StartInfo.UseShellExecute = false;
* procConvert.StartInfo.RedirectStandardOutput = true;
* procConvert.OutputDataReceived += new DataReceivedEventHandler(OutputDataHandler);
* procConvert.StartInfo.RedirectStandardError = true;
* procConvert.ErrorDataReceived += new DataReceivedEventHandler(OutputDataHandler);
* procConvert.Start();
* // Start the asynchronous read of the standard output stream.
* procConvert.BeginOutputReadLine();
* procConvert.BeginErrorReadLine();
* //Main.main.tab.SelectedTab = Main.main.tabPrint;
* }
* catch (Exception e)
* {
* Main.conn.log(e.ToString(), false, 2);
* }
* }*/
public void RunSliceNew(string file, float centerx, float centery)
{
if (procConvert != null)
{
MessageBox.Show("Last slice job still running. Slicing of new job is canceled.", "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
FormPrinterSettings ps = Main.printerSettings;
SlicingInfo.Start("Slic3r");
SlicingInfo.SetAction("Analyzing STL file ...");
try
{
STL stl = new STL();
stl.Load(file);
stl.UpdateBoundingBox();
if (stl.xMin > ps.BedLeft && stl.yMin > ps.BedFront && stl.xMax < ps.BedLeft + ps.PrintAreaWidth && stl.yMax < ps.BedFront + ps.PrintAreaDepth)
{
// User assigned valid position, so we use this
centerx = stl.xMin + (stl.xMax - stl.xMin) / 2;
centery = stl.yMin + (stl.yMax - stl.yMin) / 2;
}
stl.Clear();
}
catch (Exception e)
{
Main.conn.log(e.ToString(), false, 2);
SlicingInfo.Stop();
return;
}
SlicingInfo.SetAction("Slicing STL file ...");
string dir = Main.globalSettings.Workdir;
string config = dir + Path.DirectorySeparatorChar + "slic3r.ini";
string cdir = Main.main.slicerPanel.slic3rDirectory;
IniFile ini = new IniFile();
BasicConfiguration b = BasicConfiguration.basicConf;
string fPrinter = cdir + Path.DirectorySeparatorChar + "print" + Path.DirectorySeparatorChar + b.Slic3rPrintSettings + ".ini";
ini.read(fPrinter);
IniFile ini2 = new IniFile();
ini2.read(cdir + Path.DirectorySeparatorChar + "printer" + Path.DirectorySeparatorChar + b.Slic3rPrinterSettings + ".ini");
IniFile ini3 = new IniFile();
ini3.read(cdir + Path.DirectorySeparatorChar + "filament" + Path.DirectorySeparatorChar + b.Slic3rFilamentSettings + ".ini");
IniFile ini3_2 = new IniFile();
ini3_2.read(cdir + Path.DirectorySeparatorChar + "filament" + Path.DirectorySeparatorChar + b.Slic3rFilament2Settings + ".ini");
IniFile ini3_3 = new IniFile();
ini3_3.read(cdir + Path.DirectorySeparatorChar + "filament" + Path.DirectorySeparatorChar + b.Slic3rFilament3Settings + ".ini");
ini3.merge(ini3_2);
ini3.merge(ini3_3);
ini.add(ini2);
ini.add(ini3);
ini.flatten();
ini.write(config);
procConvert = new Process();
try
{
string basedir = (string)Main.main.PiMakerKey.GetValue("installPath", "");
string exname = "slic3r.exe";
if (Environment.OSVersion.Platform == PlatformID.Unix)
{
exname = "slic3r.pl";
}
if (Main.IsMac)
{
exname = "MacOS" + Path.DirectorySeparatorChar + "slic3r";
}
string exe = basedir + Path.DirectorySeparatorChar + "Slic3r" + Path.DirectorySeparatorChar + exname;
if (File.Exists(BasicConfiguration.basicConf.Slic3rExecutable))
{
exe = BasicConfiguration.basicConf.Slic3rExecutable;
}
slicefile = file;
string target = StlToGCode(file);
if (File.Exists(target))
{
File.Delete(target);
}
procConvert.EnableRaisingEvents = true;
procConvert.Exited += new EventHandler(ConversionExited);
procConvert.StartInfo.FileName = Main.IsMono ? exe : wrapQuotes(exe);
StringBuilder sb = new StringBuilder();
sb.Append("--load ");
sb.Append(wrapQuotes(config));
sb.Append(" --print-center ");
sb.Append(centerx.ToString("0", GCode.format));
sb.Append(",");
sb.Append(centery.ToString("0", GCode.format));
sb.Append(" -o ");
sb.Append(wrapQuotes(StlToGCode(file)));
sb.Append(" ");
sb.Append(wrapQuotes(file));
procConvert.StartInfo.Arguments = sb.ToString();
procConvert.StartInfo.UseShellExecute = false;
procConvert.StartInfo.RedirectStandardOutput = true;
procConvert.OutputDataReceived += new DataReceivedEventHandler(OutputDataHandler);
procConvert.StartInfo.RedirectStandardError = true;
procConvert.ErrorDataReceived += new DataReceivedEventHandler(OutputDataHandler);
procConvert.Start();
// Start the asynchronous read of the standard output stream.
procConvert.BeginOutputReadLine();
procConvert.BeginErrorReadLine();
//Main.main.tab.SelectedTab = Main.main.tabPrint;
}
catch (Exception e)
{
Main.conn.log(e.ToString(), false, 2);
}
}
public void Autoposition()
{
if (autosizeFailed)
{
return;
}
RectPacker packer = new RectPacker(1, 1);
int border = 3;
FormPrinterSettings ps = Main.printerSettings;
float maxW = ps.PrintAreaWidth;
float maxH = ps.PrintAreaDepth;
float xOff = ps.BedLeft, yOff = ps.BedFront;
if (ps.HasDumpArea)
{
if (ps.DumpAreaFront <= 0)
{
yOff = ps.BedFront + ps.DumpAreaDepth - ps.DumpAreaFront;
maxH -= yOff;
}
else if (ps.DumpAreaDepth + ps.DumpAreaFront >= maxH)
{
yOff = ps.BedFront + -(maxH - ps.DumpAreaFront);
maxH += yOff;
}
else if (ps.DumpAreaLeft <= 0)
{
xOff = ps.BedLeft + ps.DumpAreaWidth - ps.DumpAreaLeft;
maxW -= xOff;
}
else if (ps.DumpAreaWidth + ps.DumpAreaLeft >= maxW)
{
xOff = ps.BedLeft + maxW - ps.DumpAreaLeft;
maxW += xOff;
}
}
foreach (STL stl in listSTLObjects.Items)
{
int w = 2 * border + (int)Math.Ceiling(stl.xMax - stl.xMin);
int h = 2 * border + (int)Math.Ceiling(stl.yMax - stl.yMin);
if (!packer.addAtEmptySpotAutoGrow(new PackerRect(0, 0, w, h, stl), (int)maxW, (int)maxH))
{
autosizeFailed = true;
}
}
if (autosizeFailed)
{
MessageBox.Show("Too many objects on printer bed for automatic packing.\r\nPacking disabled until elements are removed.",
"Printer bed full", MessageBoxButtons.OK, MessageBoxIcon.Error);
return;
}
float xAdd = (maxW - packer.w) / 2.0f;
float yAdd = (maxH - packer.h) / 2.0f;
foreach (PackerRect rect in packer.vRects)
{
STL s = (STL)rect.obj;
float xPos = xOff + xAdd + rect.x + border;
float yPos = yOff + yAdd + rect.y + border;
s.Position.x += xPos - s.xMin;
s.Position.y += yPos - s.yMin;
s.UpdateBoundingBox();
}
Main.main.threedview.UpdateChanges();
}