private void FormOpenDental_Load(object sender, System.EventArgs e)
{
Splash.Dispose();
Version versionOd=Assembly.GetAssembly(typeof(FormOpenDental)).GetName().Version;
Version versionObBus=Assembly.GetAssembly(typeof(Db)).GetName().Version;
if(versionOd!=versionObBus) {
MessageBox.Show("Mismatched program file versions. Please run the Open Dental setup file again on this computer.");//No MsgBox or Lan.g() here, because we don't want to access the database if there is a version conflict.
Application.Exit();
return;
}
allNeutral();
string odUser="";
string odPassHash="";
string webServiceUri="";
YN webServiceIsEcw=YN.Unknown;
string odPassword="";
string serverName="";
string databaseName="";
string mySqlUser="";
string mySqlPassword="";
if(CommandLineArgs.Length!=0) {
for(int i=0;i<CommandLineArgs.Length;i++) {
if(CommandLineArgs[i].StartsWith("UserName="******"');
}
if(CommandLineArgs[i].StartsWith("PassHash=") && CommandLineArgs[i].Length>9) {
odPassHash=CommandLineArgs[i].Substring(9).Trim('"');
}
if(CommandLineArgs[i].StartsWith("WebServiceUri=") && CommandLineArgs[i].Length>14) {
webServiceUri=CommandLineArgs[i].Substring(14).Trim('"');
}
if(CommandLineArgs[i].StartsWith("WebServiceIsEcw=") && CommandLineArgs[i].Length>16) {
if(CommandLineArgs[i].Substring(16).Trim('"')=="True") {
webServiceIsEcw=YN.Yes;
}
else {
webServiceIsEcw=YN.No;
}
}
if(CommandLineArgs[i].StartsWith("OdPassword="******"');
}
if(CommandLineArgs[i].StartsWith("ServerName=") && CommandLineArgs[i].Length>11) {
serverName=CommandLineArgs[i].Substring(11).Trim('"');
}
if(CommandLineArgs[i].StartsWith("DatabaseName=") && CommandLineArgs[i].Length>13) {
databaseName=CommandLineArgs[i].Substring(13).Trim('"');
}
if(CommandLineArgs[i].StartsWith("MySqlUser="******"');
}
if(CommandLineArgs[i].StartsWith("MySqlPassword="******"');
}
}
}
YN noShow=YN.Unknown;
if(webServiceUri!=""){//a web service was specified
if(odUser!="" && odPassword!=""){//and both a username and password were specified
noShow=YN.Yes;
}
}
else if(databaseName!=""){
noShow=YN.Yes;
}
FormChooseDatabase formChooseDb=new FormChooseDatabase();
formChooseDb.OdUser=odUser;
formChooseDb.OdPassHash=odPassHash;
formChooseDb.WebServiceUri=webServiceUri;
formChooseDb.WebServiceIsEcw=webServiceIsEcw;
formChooseDb.OdPassword=odPassword;
formChooseDb.ServerName=serverName;
formChooseDb.DatabaseName=databaseName;
formChooseDb.MySqlUser=mySqlUser;
formChooseDb.MySqlPassword=mySqlPassword;
formChooseDb.NoShow=noShow;//either unknown or yes
formChooseDb.GetConfig();
formChooseDb.GetCmdLine();
while(true) {//Most users will loop through once. If user tries to connect to a db with replication failure, they will loop through again.
if(formChooseDb.NoShow==YN.Yes) {
if(!formChooseDb.TryToConnect()) {
formChooseDb.ShowDialog();
if(formChooseDb.DialogResult==DialogResult.Cancel) {
Application.Exit();
return;
}
}
}
else {
formChooseDb.ShowDialog();
if(formChooseDb.DialogResult==DialogResult.Cancel) {
Application.Exit();
return;
}
}
Cursor=Cursors.WaitCursor;
Splash=new FormSplash();
if(CommandLineArgs.Length==0) {
Splash.Show();
}
if(!PrefsStartup()){//looks for the AtoZ folder here, but would like to eventually move that down to after login
Cursor=Cursors.Default;
Splash.Dispose();
Application.Exit();
return;
}
if(ReplicationServers.Server_id!=0 && ReplicationServers.Server_id==PrefC.GetInt(PrefName.ReplicationFailureAtServer_id)) {
MsgBox.Show(this,"This database is temporarily unavailable. Please connect instead to your alternate database at the other location.");
formChooseDb.NoShow=YN.No;//This ensures they will get a choose db window next time through the loop.
ReplicationServers.Server_id=-1;
continue;
}
break;
}
if(Programs.UsingEcwTight()) {
Splash.Dispose();//We don't show splash screen when bridging to eCW.
}
//We no longer do this shotgun approach because it can slow the loading time.
//RefreshLocalData(InvalidType.AllLocal);
List<InvalidType> invalidTypes=new List<InvalidType>();
invalidTypes.Add(InvalidType.Prefs);
invalidTypes.Add(InvalidType.Defs);
invalidTypes.Add(InvalidType.Providers);//obviously heavily used
invalidTypes.Add(InvalidType.Programs);//already done above, but needs to be done explicitly to trigger the PostCleanup
invalidTypes.Add(InvalidType.ToolBut);//so program buttons will show in all the toolbars
if(Programs.UsingEcwTight()) {
lightSignalGrid1.Visible=false;
}
else{
invalidTypes.Add(InvalidType.Signals);//so when mouse moves over light buttons, it won't crash
}
Plugins.LoadAllPlugins(this);//moved up from right after optimizing tooth chart graphics. New position might cause problems.
//It was moved because RefreshLocalData()=>RefreshLocalDataPostCleanup()=>ContrChart2.InitializeLocalData()=>LayoutToolBar() has a hook.
RefreshLocalData(invalidTypes.ToArray());
FillSignalButtons(null);
ContrManage2.InitializeOnStartup();//so that when a signal is received, it can handle it.
//Lan.Refresh();//automatically skips if current culture is en-US
//LanguageForeigns.Refresh(CultureInfo.CurrentCulture);//automatically skips if current culture is en-US
DataValid.BecameInvalid += new OpenDental.ValidEventHandler(DataValid_BecameInvalid);
signalLastRefreshed=MiscData.GetNowDateTime();
if(PrefC.GetInt(PrefName.ProcessSigsIntervalInSecs)==0) {
timerSignals.Enabled=false;
}
else {
timerSignals.Interval=PrefC.GetInt(PrefName.ProcessSigsIntervalInSecs)*1000;
timerSignals.Enabled=true;
}
timerTimeIndic.Enabled=true;
myOutlookBar.Buttons[0].Caption=Lan.g(this,"Appts");
myOutlookBar.Buttons[1].Caption=Lan.g(this,"Family");
myOutlookBar.Buttons[2].Caption=Lan.g(this,"Account");
myOutlookBar.Buttons[3].Caption=Lan.g(this,"Treat' Plan");
//myOutlookBar.Buttons[4].Caption=Lan.g(this,"Chart");//??done in RefreshLocalData
myOutlookBar.Buttons[5].Caption=Lan.g(this,"Images");
myOutlookBar.Buttons[6].Caption=Lan.g(this,"Manage");
foreach(MenuItem menuItem in mainMenu.MenuItems){
TranslateMenuItem(menuItem);
}
if(CultureInfo.CurrentCulture.Name=="en-US"){
//for the business layer, this functionality is duplicated in the Lan class. Need for SL.
CultureInfo cInfo=(CultureInfo)CultureInfo.CurrentCulture.Clone();
cInfo.DateTimeFormat.ShortDatePattern="MM/dd/yyyy";
Application.CurrentCulture=cInfo;
//
//if(CultureInfo.CurrentCulture.TwoLetterISOLanguageName=="en"){
menuItemTranslation.Visible=false;
}
if(!File.Exists("Help.chm")){
menuItemHelpWindows.Visible=false;
}
if(Environment.OSVersion.Platform==PlatformID.Unix){//Create A to Z unsupported on Unix for now.
menuItemCreateAtoZFolders.Visible=false;
}
if(!PrefC.GetBool(PrefName.ADAdescriptionsReset)) {
ProcedureCodes.ResetADAdescriptions();
Prefs.UpdateBool(PrefName.ADAdescriptionsReset,true);
}
Splash.Dispose();
//Choose a default DirectX format when no DirectX format has been specified and running in DirectX tooth chart mode.
//ComputerPref localComputerPrefs=ComputerPrefs.GetForLocalComputer();
if(ComputerPrefs.LocalComputer.GraphicsSimple==DrawingMode.DirectX && ComputerPrefs.LocalComputer.DirectXFormat=="") {
//MessageBox.Show(Lan.g(this,"Optimizing tooth chart graphics. This may take a few minutes. You will be notified when the process is complete."));
ComputerPrefs.LocalComputer.DirectXFormat=FormGraphics.GetPreferredDirectXFormat(this);
if(ComputerPrefs.LocalComputer.DirectXFormat=="invalid") {
//No valid local DirectX format could be found.
//Simply revert to OpenGL.
ComputerPrefs.LocalComputer.GraphicsSimple=DrawingMode.OpenGL;
}
ComputerPrefs.Update(ComputerPrefs.LocalComputer);
ContrChart2.InitializeOnStartup();
//MsgBox.Show(this,"Done optimizing tooth chart graphics.");
}
if(Security.CurUser==null) {//It could already be set if using web service because login from ChooseDatabase window.
if(Programs.UsingEcwTight() && odUser!="") {//only leave it null if a user was passed in on the commandline. If starting OD manually, it will jump into the else.
//leave user as null
}
else {
if(odUser!="" && odPassword!=""){//if a username and password were passed in
Userod user=Userods.GetUserByName(odUser,Programs.UsingEcwTight());
if(user!=null){
if(Userods.CheckTypedPassword(odPassword,user.Password)){//password matches
Security.CurUser=user.Copy();
if(RemotingClient.RemotingRole==RemotingRole.ClientWeb){
string pw=odPassword;
if(Programs.UsingEcwTight()) {//ecw requires hash, but non-ecw requires actual password
pw=Userods.EncryptPassword(pw,true);
}
Security.PasswordTyped=pw;
}
//TasksCheckOnStartup is one thing that doesn't get done because login window wasn't used
}
}
}
if(Security.CurUser==null) {//normal manual log in process
Userod adminUser=Userods.GetAdminUser();
if(adminUser.Password=="") {
Security.CurUser=adminUser.Copy();
}
else {
FormLogOn_=new FormLogOn();
FormLogOn_.ShowDialog(this);
if(FormLogOn_.DialogResult==DialogResult.Cancel) {
Cursor=Cursors.Default;
Application.Exit();
return;
}
}
}
}
}
if(userControlTasks1.Visible) {
userControlTasks1.InitializeOnStartup();
}
myOutlookBar.SelectedIndex=Security.GetModule(0);//for eCW, this fails silently.
if(Programs.UsingEcwTight()) {
myOutlookBar.SelectedIndex=4;//Chart module
//ToolBarMain.Height=0;//this should force the modules further up on the screen
//ToolBarMain.Visible=false;
LayoutControls();
}
if(Programs.UsingOrion) {
myOutlookBar.SelectedIndex=1;//Family module
}
myOutlookBar.Invalidate();
LayoutToolBar();
SetModuleSelected();
Cursor=Cursors.Default;
if(myOutlookBar.SelectedIndex==-1){
MsgBox.Show(this,"You do not have permission to use any modules.");
}
Bridges.Trojan.StartupCheck();
FormUAppoint.StartThreadIfEnabled();
Bridges.ICat.StartFileWatcher();
if(PrefC.GetBool(PrefName.DockPhonePanelShow)){
#if !DEBUG
if(Process.GetProcessesByName("WebCamOD").Length==0) {
try {
Process.Start("WebCamOD.exe");
}
catch { }//for example, if working from home.
}
#endif
}
#if !TRIALONLY
if(PrefC.GetDate(PrefName.BackupReminderLastDateRun).AddMonths(1)<DateTime.Today) {
FormBackupReminder FormBR=new FormBackupReminder();
FormBR.ShowDialog();
if(FormBR.DialogResult==DialogResult.OK){
Prefs.UpdateDateT(PrefName.BackupReminderLastDateRun,DateTime.Today);
}
else{
Application.Exit();
return;
}
}
#endif
FillPatientButton(0,"",false,"",0);
ThreadCommandLine=new Thread(new ThreadStart(Listen));
if(!IsSecondInstance) {//can't use a port that's already in use.
//js We can't do this yet. I tried it already, and it consumes nearly 100% CPU. Not while testing, but later.
//So until we really need to do it, it's easiest no just not start the thread for now.
//ThreadCommandLine.Start();
}
//if(CommandLineArgs.Length>0) {
ProcessCommandLine(CommandLineArgs);
//}
try {
Computers.UpdateHeartBeat(Environment.MachineName);
}
catch { }
string dllPathEHR=ODFileUtils.CombinePaths(Application.StartupPath,"EHR.dll");
if(PrefC.GetBoolSilent(PrefName.ShowFeatureEhr,false)) {
#if EHRTEST
FormEHR=new FormEHR();
ContrChart2.InitializeLocalData();//because toolbar is now missing the EHR button. Only a problem if a db conversion is done when opening the program.
#else
FormEHR=null;
AssemblyEHR=null;
if(File.Exists(dllPathEHR)) {//EHR.dll is available, so load it up
AssemblyEHR=Assembly.LoadFile(dllPathEHR);
Type type=AssemblyEHR.GetType("EHR.FormEHR");//namespace.class
FormEHR=Activator.CreateInstance(type);
}
#endif
}
dateTimeLastActivity=DateTime.Now;
timerLogoff.Enabled=true;
timerReplicationMonitor.Enabled=true;
Plugins.HookAddCode(this,"FormOpenDental.Load_end");
}
private void FormOpenDental_Load(object sender,System.EventArgs e) {
_isStartingUp=true;//Halts mobile synch during updates.
Splash.Dispose();
allNeutral();
string odUser="";
string odPassHash="";
string webServiceUri="";
YN webServiceIsEcw=YN.Unknown;
bool isSilentUpdate=false;
string odPassword="";
string serverName="";
string databaseName="";
string mySqlUser="";
string mySqlPassword="";
if(CommandLineArgs.Length!=0) {
for(int i=0;i<CommandLineArgs.Length;i++) {
if(CommandLineArgs[i].StartsWith("UserName="******"');
}
if(CommandLineArgs[i].StartsWith("PassHash=") && CommandLineArgs[i].Length>9) {
odPassHash=CommandLineArgs[i].Substring(9).Trim('"');
}
if(CommandLineArgs[i].StartsWith("WebServiceUri=") && CommandLineArgs[i].Length>14) {
webServiceUri=CommandLineArgs[i].Substring(14).Trim('"');
}
if(CommandLineArgs[i].StartsWith("WebServiceIsEcw=") && CommandLineArgs[i].Length>16) {
if(CommandLineArgs[i].Substring(16).Trim('"')=="True") {
webServiceIsEcw=YN.Yes;
}
else {
webServiceIsEcw=YN.No;
}
}
if(CommandLineArgs[i].StartsWith("OdPassword="******"');
}
if(CommandLineArgs[i].StartsWith("ServerName=") && CommandLineArgs[i].Length>11) {
serverName=CommandLineArgs[i].Substring(11).Trim('"');
}
if(CommandLineArgs[i].StartsWith("DatabaseName=") && CommandLineArgs[i].Length>13) {
databaseName=CommandLineArgs[i].Substring(13).Trim('"');
}
if(CommandLineArgs[i].StartsWith("MySqlUser="******"');
}
if(CommandLineArgs[i].StartsWith("MySqlPassword="******"');
}
if(CommandLineArgs[i].StartsWith("IsSilentUpdate=") && CommandLineArgs[i].Length>15) {
if(CommandLineArgs[i].Substring(15).Trim('"').ToLower()=="true") {
isSilentUpdate=true;
}
else {
isSilentUpdate=false;
}
}
}
}
YN noShow=YN.Unknown;
if(webServiceUri!="") {//a web service was specified
if(odUser!="" && odPassword!="") {//and both a username and password were specified
noShow=YN.Yes;
}
}
else if(databaseName!="") {
noShow=YN.Yes;
}
//Users that want to silently update MUST pass in the following command line args.
if(isSilentUpdate && (odUser.Trim()==""
|| (odPassword.Trim()=="" && odPassHash.Trim()=="")
|| serverName.Trim()==""
|| databaseName.Trim()==""
|| mySqlUser.Trim()==""
|| mySqlPassword.Trim()==""))
{
ExitCode=104;//Required command line arguments have not been set for silent updating
Application.Exit();
return;
}
Version versionOd=Assembly.GetAssembly(typeof(FormOpenDental)).GetName().Version;
Version versionObBus=Assembly.GetAssembly(typeof(Db)).GetName().Version;
if(versionOd!=versionObBus) {
if(isSilentUpdate) {
ExitCode=105;//File versions do not match
}
else {//Not a silent update. Show a warning message.
//No MsgBox or Lan.g() here, because we don't want to access the database if there is a version conflict.
MessageBox.Show("Mismatched program file versions. Please run the Open Dental setup file again on this computer.");
}
Application.Exit();
return;
}
FormChooseDatabase formChooseDb=new FormChooseDatabase();
formChooseDb.OdUser=odUser;
formChooseDb.OdPassHash=odPassHash;
formChooseDb.WebServiceUri=webServiceUri;
formChooseDb.WebServiceIsEcw=webServiceIsEcw;
formChooseDb.OdPassword=odPassword;
formChooseDb.ServerName=serverName;
formChooseDb.DatabaseName=databaseName;
formChooseDb.MySqlUser=mySqlUser;
formChooseDb.MySqlPassword=mySqlPassword;
formChooseDb.NoShow=noShow;//either unknown or yes
formChooseDb.GetConfig();
formChooseDb.GetCmdLine();
while(true) {//Most users will loop through once. If user tries to connect to a db with replication failure, they will loop through again.
if(formChooseDb.NoShow==YN.Yes) {
if(!formChooseDb.TryToConnect()) {
if(isSilentUpdate) {
ExitCode=106;//Connection to specified database has failed
Application.Exit();
return;
}
formChooseDb.ShowDialog();
if(formChooseDb.DialogResult==DialogResult.Cancel) {
Application.Exit();
return;
}
}
}
else {
formChooseDb.ShowDialog();
if(formChooseDb.DialogResult==DialogResult.Cancel) {
Application.Exit();
return;
}
}
Cursor=Cursors.WaitCursor;
//theme
try {
ODToolBar.UseBlueTheme=PrefC.GetBool(PrefName.ColorTheme);
ODGrid.UseBlueTheme=PrefC.GetBool(PrefName.ColorTheme);
}
catch {
//try/catch in case you are trying to convert from an older version of OD and need to update the DB.
}
this.Invalidate();//apply them at next repaint.
Plugins.LoadAllPlugins(this);//moved up from near RefreshLocalData(invalidTypes). New position might cause problems.
Splash=new FormSplash();
if(CommandLineArgs.Length==0) {
Splash.Show();
}
if(!PrefsStartup(isSilentUpdate)) {//looks for the AtoZ folder here, but would like to eventually move that down to after login. In Release, refreshes the Pref cache if conversion successful.
Cursor=Cursors.Default;
Splash.Dispose();
if(ExitCode==0) {
//PrefsStartup failed and ExitCode is still 0 which means an unexpected error must have occured.
//Set the exit code to 999 which will represent an Unknown Error
ExitCode=999;
}
Application.Exit();
return;
}
if(isSilentUpdate) {
//The db was successfully updated so there is nothing else that needs to be done after this point.
Application.Exit();//Exits with ExitCode=0
return;
}
if(ReplicationServers.Server_id!=0 && ReplicationServers.Server_id==PrefC.GetInt(PrefName.ReplicationFailureAtServer_id)) {
MsgBox.Show(this,"This database is temporarily unavailable. Please connect instead to your alternate database at the other location.");
formChooseDb.NoShow=YN.No;//This ensures they will get a choose db window next time through the loop.
ReplicationServers.Server_id=-1;
continue;
}
break;
}
if(Programs.UsingEcwTightOrFullMode()) {
Splash.Dispose();//We don't show splash screen when bridging to eCW.
}
RefreshLocalData(InvalidType.Prefs);//should only refresh preferences so that SignalLastClearedDate preference can be used in ClearOldSignals()
Signalods.ClearOldSignals();
//We no longer do this shotgun approach because it can slow the loading time.
//RefreshLocalData(InvalidType.AllLocal);
List<InvalidType> invalidTypes=new List<InvalidType>();
//invalidTypes.Add(InvalidType.Prefs);//Preferences were refreshed above. The only preference which might be stale is SignalLastClearedDate, but it is not used anywhere after calling ClearOldSignals() above.
invalidTypes.Add(InvalidType.Defs);
invalidTypes.Add(InvalidType.Providers);//obviously heavily used
invalidTypes.Add(InvalidType.Programs);//already done above, but needs to be done explicitly to trigger the PostCleanup
invalidTypes.Add(InvalidType.ToolBut);//so program buttons will show in all the toolbars
if(Programs.UsingEcwTightMode()) {
lightSignalGrid1.Visible=false;
}
else{
invalidTypes.Add(InvalidType.Signals);//so when mouse moves over light buttons, it won't crash
}
//Plugins.LoadAllPlugins(this);//moved up from right after optimizing tooth chart graphics. New position might cause problems.
//It was moved because RefreshLocalData()=>RefreshLocalDataPostCleanup()=>ContrChart2.InitializeLocalData()=>LayoutToolBar() has a hook.
//Moved it up again on 10/3/13
RefreshLocalData(invalidTypes.ToArray());
FillSignalButtons(null);
ContrManage2.InitializeOnStartup();//so that when a signal is received, it can handle it.
//Lan.Refresh();//automatically skips if current culture is en-US
//LanguageForeigns.Refresh(CultureInfo.CurrentCulture);//automatically skips if current culture is en-US
DataValid.BecameInvalid += new OpenDental.ValidEventHandler(DataValid_BecameInvalid);
signalLastRefreshed=MiscData.GetNowDateTime();
if(PrefC.GetInt(PrefName.ProcessSigsIntervalInSecs)==0) {
timerSignals.Enabled=false;
}
else {
timerSignals.Interval=PrefC.GetInt(PrefName.ProcessSigsIntervalInSecs)*1000;
timerSignals.Enabled=true;
}
timerTimeIndic.Enabled=true;
myOutlookBar.Buttons[0].Caption=Lan.g(this,"Appts");
myOutlookBar.Buttons[1].Caption=Lan.g(this,"Family");
myOutlookBar.Buttons[2].Caption=Lan.g(this,"Account");
myOutlookBar.Buttons[3].Caption=Lan.g(this,"Treat' Plan");
//myOutlookBar.Buttons[4].Caption=Lan.g(this,"Chart");//??done in RefreshLocalData
myOutlookBar.Buttons[5].Caption=Lan.g(this,"Images");
myOutlookBar.Buttons[6].Caption=Lan.g(this,"Manage");
foreach(MenuItem menuItem in mainMenu.MenuItems){
TranslateMenuItem(menuItem);
}
if(CultureInfo.CurrentCulture.Name=="en-US") {
//for the business layer, this functionality is duplicated in the Lan class. Need for SL.
CultureInfo cInfo=(CultureInfo)CultureInfo.CurrentCulture.Clone();
cInfo.DateTimeFormat.ShortDatePattern="MM/dd/yyyy";
Application.CurrentCulture=cInfo;
//
//if(CultureInfo.CurrentCulture.TwoLetterISOLanguageName=="en"){
menuItemTranslation.Visible=false;
}
else {//not en-US
CultureInfo cInfo=(CultureInfo)CultureInfo.CurrentCulture.Clone();
string dateFormatCur=cInfo.DateTimeFormat.ShortDatePattern;
//The carrot indicates the beginning of a word. {2} means that there has to be exactly 2 y's. [^a-z] means any character except a through z. $ means end of word.
if(Regex.IsMatch(dateFormatCur,"^y{2}[^a-z]")
|| Regex.IsMatch(dateFormatCur,"[^a-z]y{2}$"))
{
//We know there are only two y's in the format. Force there to be four.
cInfo.DateTimeFormat.ShortDatePattern=dateFormatCur.Replace("yy","yyyy");
Application.CurrentCulture=cInfo;
}
}
//For EHR users we want to load up the EHR code list from the obfuscated dll in a background thread because it takes roughly 11 seconds to load up.
if(PrefC.GetBool(PrefName.ShowFeatureEhr)) {
try {
Thread threadPreloadEhrCodeList=new Thread((ThreadStart)EhrCodes.UpdateList);//Background loading of the EHR.dll code list.
threadPreloadEhrCodeList.Start();
}
catch {
//This should never happen. It would most likely be due to a corrupt dll issue but I don't want to stop the start up sequence.
//Users could theoretically use Open Dental for an entire day and never hit the code that utilizes the EhrCodes class.
//Therefore, we do not want to cause any issues and the worst case scenario is the users has to put up with the 11 second delay (old behavior).
}
}
if(!File.Exists("Help.chm")){
menuItemHelpWindows.Visible=false;
}
if(Environment.OSVersion.Platform==PlatformID.Unix){//Create A to Z unsupported on Unix for now.
menuItemCreateAtoZFolders.Visible=false;
}
if(!PrefC.GetBool(PrefName.ProcLockingIsAllowed)) {
menuItemProcLockTool.Visible=false;
}
if(!PrefC.GetBool(PrefName.ADAdescriptionsReset)) {
ProcedureCodes.ResetADAdescriptions();
Prefs.UpdateBool(PrefName.ADAdescriptionsReset,true);
}
#region Start OpenDent Services
//If this is the designated update server, make sure that all "OpenDent..." services are up and running.
//This is mainly to increase the odds that critical services required for e-Services are always running.
if(PrefC.GetString(PrefName.WebServiceServerName)!="" && ODEnvironment.IdIsThisComputer(PrefC.GetString(PrefName.WebServiceServerName))) {
List<ServiceController> listServices=ODEnvironment.GetAllOpenDentServices();
for(int i=0;i<listServices.Count;i++) {
//Only attempt to start services that are of status stopped or stop pending.
//If we do not do this, an InvalidOperationException will throw that says "An instance of the service is already running"
if(listServices[i].Status!=ServiceControllerStatus.Stopped && listServices[i].Status!=ServiceControllerStatus.StopPending) {
continue;
}
try {
listServices[i].Start();//We will not wait for the service to start so that loading OD does not take any longer that usual.
}
catch {
//An InvalidOperationException can get thrown if the service could not be started. E.g. current user is not running Open Dental as an administrator.
//We do not want to halt the startup sequence here. If we want to notify customers of a downed service, there needs to be an additional monitoring service installed.
}
}
}
#endregion
Splash.Dispose();
//Choose a default DirectX format when no DirectX format has been specified and running in DirectX tooth chart mode.
//ComputerPref localComputerPrefs=ComputerPrefs.GetForLocalComputer();
if(ComputerPrefs.LocalComputer.GraphicsSimple==DrawingMode.DirectX && ComputerPrefs.LocalComputer.DirectXFormat=="") {
//MessageBox.Show(Lan.g(this,"Optimizing tooth chart graphics. This may take a few minutes. You will be notified when the process is complete."));
ComputerPrefs.LocalComputer.DirectXFormat=FormGraphics.GetPreferredDirectXFormat(this);
if(ComputerPrefs.LocalComputer.DirectXFormat=="invalid") {
//No valid local DirectX format could be found.
//Simply revert to OpenGL.
ComputerPrefs.LocalComputer.GraphicsSimple=DrawingMode.Simple2D;
}
ComputerPrefs.Update(ComputerPrefs.LocalComputer);
ContrChart2.InitializeOnStartup();
//MsgBox.Show(this,"Done optimizing tooth chart graphics.");
}
if(ODEnvironment.IsRunningOnDbServer(MiscData.GetODServer()) && PrefC.GetBool(PrefName.ShowFeatureEhr)) {//OpenDental has EHR enabled and is running on the same machine as the mysql server it is connected to.*/
_threadTimeSynch=new Thread(new ThreadStart(ThreadTimeSynch_Synch));
_threadTimeSynch.Start();
}
_isStartingUp=false;//Used to allow Mobile Synch to continue
if(Security.CurUser==null) {//It could already be set if using web service because login from ChooseDatabase window.
if(Programs.UsingEcwTightOrFullMode() && odUser!="") {//only leave it null if a user was passed in on the commandline. If starting OD manually, it will jump into the else.
//leave user as null
}
else {
if(odUser!="" && odPassword!=""){//if a username and password were passed in
//Userod user=Userods.GetUserByName(odUser,Programs.UsingEcwTight());
Userod user=Userods.GetUserByName(odUser,Programs.UsingEcwTightOrFullMode());
if(user!=null){
if(Userods.CheckTypedPassword(odPassword,user.Password)){//password matches
Security.CurUser=user.Copy();
if(RemotingClient.RemotingRole==RemotingRole.ClientWeb){
string pw=odPassword;
//if(Programs.UsingEcwTight()) {//ecw requires hash, but non-ecw requires actual password
if(Programs.UsingEcwTightOrFullMode()) {//ecw requires hash, but non-ecw requires actual password
pw=Userods.EncryptPassword(pw,true);
}
Security.PasswordTyped=pw;
}
//TasksCheckOnStartup is one thing that doesn't get done because login window wasn't used
}
}
}
if(Security.CurUser==null) {//normal manual log in process
Userod adminUser=Userods.GetAdminUser();
if(adminUser.Password=="") {
Security.CurUser=adminUser.Copy();
SecurityLogs.MakeLogEntry(Permissions.UserLogOnOff,0,"User: "******" has logged on.");
}
else {
FormLogOn_=new FormLogOn();
FormLogOn_.ShowDialog(this);
if(FormLogOn_.DialogResult==DialogResult.Cancel) {
Cursor=Cursors.Default;
Application.Exit();
return;
}
}
}
}
}
if(userControlTasks1.Visible) {
userControlTasks1.InitializeOnStartup();
}
myOutlookBar.SelectedIndex=Security.GetModule(0);//for eCW, this fails silently.
//if(Programs.UsingEcwTight()) {
if(Programs.UsingEcwTightOrFullMode()
|| (HL7Defs.IsExistingHL7Enabled() && !HL7Defs.GetOneDeepEnabled().ShowAppts)) {
myOutlookBar.SelectedIndex=4;//Chart module
//ToolBarMain.Height=0;//this should force the modules further up on the screen
//ToolBarMain.Visible=false;
LayoutControls();
}
if(Programs.UsingOrion) {
myOutlookBar.SelectedIndex=1;//Family module
}
myOutlookBar.Invalidate();
LayoutToolBar();
//If clinics are enabled, we will set the public ClinicNum variable
//If the user is restricted to a clinic(s), and the computerpref clinic is not one of the user's restricted clinics, the user's clinic will be selected
//If the user is not restricted, or if the user is restricted but has access to the computerpref clinic, the computerpref clinic will be selected
//The ClinicNum will determine which view is loaded, either from the computerpref table or from the userodapptview table
if(!PrefC.GetBool(PrefName.EasyNoClinics) && Security.CurUser!=null) {//If block must be run before SetModuleSelected() so correct clinic filtration occurs.
List<Clinic> listClinics=Clinics.GetForUserod(Security.CurUser);
bool isCompClinicAllowed=false;
for(int i=0;i<listClinics.Count;i++) {
if(listClinics[i].ClinicNum==ComputerPrefs.LocalComputer.ClinicNum) {
isCompClinicAllowed=true;
break;
}
}
if(Security.CurUser.ClinicIsRestricted && !isCompClinicAllowed) {//user is restricted and does not have access to the computerpref clinic
ClinicNum=Security.CurUser.ClinicNum;
}
else {//the user is either not restricted to a clinic(s) or the user is restricted but has access to the computerpref clinic
ClinicNum=ComputerPrefs.LocalComputer.ClinicNum;
}
RefreshMenuClinics();
}
SetModuleSelected();
Cursor=Cursors.Default;
if(myOutlookBar.SelectedIndex==-1){
MsgBox.Show(this,"You do not have permission to use any modules.");
}
Bridges.Trojan.StartupCheck();
FormUAppoint.StartThreadIfEnabled();
Bridges.ICat.StartFileWatcher();
Bridges.TigerView.StartFileWatcher();
if(PrefC.GetBool(PrefName.DockPhonePanelShow)) {
menuItemResellers.Visible=true;
menuItemXChargeReconcile.Visible=true;
#if !DEBUG
if(Process.GetProcessesByName("WebCamOD").Length==0) {
try {
Process.Start("WebCamOD.exe");
}
catch { }//for example, if working from home.
}
#endif
ThreadVM=new Thread(new ThreadStart(this.ThreadVM_SetLabelMsg));
ThreadVM.Start();//It's done this way because the file activity tends to lock the UI on slow connections.
ThreadHqMetrics=new Thread(new ThreadStart(PhoneWebCamTickWorkerThread));
ThreadHqMetrics.Start();
}
#if !TRIALONLY
if(PrefC.GetDate(PrefName.BackupReminderLastDateRun).AddMonths(1)<DateTime.Today) {
FormBackupReminder FormBR=new FormBackupReminder();
FormBR.ShowDialog();
if(FormBR.DialogResult==DialogResult.OK){
Prefs.UpdateDateT(PrefName.BackupReminderLastDateRun,DateTimeOD.Today);
}
else{
Application.Exit();
return;
}
}
//==tg Commented out on 04/24/2014 after discussion deciding it was not necessary to synchronize time on start-up. Timeouts and other errors were causing complaints from customers.
//if(PrefC.GetBool(PrefName.ShowFeatureEhr) && !_isTimeSynchThreadRunning) {
// FormEhrTimeSynch FormEhrTS = new FormEhrTimeSynch();
// FormEhrTS.IsAutoLaunch=true;
// if(!FormEhrTS.TimesInSynchFast()) {
// FormEhrTS.ShowDialog();
// }
//}
#endif
FillPatientButton(null);
//ThreadCommandLine=new Thread(new ThreadStart(Listen));
//if(!IsSecondInstance) {//can't use a port that's already in use.
// //js We can't do this yet. I tried it already, and it consumes nearly 100% CPU. Not while testing, but later.
// //So until we really need to do it, it's easiest no just not start the thread for now.
// //ThreadCommandLine.Start();
//}
//if(CommandLineArgs.Length>0) {
ProcessCommandLine(CommandLineArgs);
//}
try {
Computers.UpdateHeartBeat(Environment.MachineName,true);
}
catch { }
//string dllPathEHR=ODFileUtils.CombinePaths(Application.StartupPath,"EHR.dll");
//if(PrefC.GetBoolSilent(PrefName.ShowFeatureEhr,false)) {
// #if EHRTEST
// FormEHR=new FormEHR();
// ContrChart2.InitializeLocalData();//because toolbar is now missing the EHR button. Only a problem if a db conversion is done when opening the program.
// #else
// ObjFormEhrMeasures=null;
// AssemblyEHR=null;
// if(File.Exists(dllPathEHR)) {//EHR.dll is available, so load it up
// AssemblyEHR=Assembly.LoadFile(dllPathEHR);
// Type type=AssemblyEHR.GetType("EHR.FormEHR");//namespace.class
// ObjFormEhrMeasures=Activator.CreateInstance(type);
// }
// #endif
//}
Text=PatientL.GetMainTitle(Patients.GetPat(CurPatNum),ClinicNum);
dateTimeLastActivity=DateTime.Now;
timerLogoff.Enabled=true;
timerReplicationMonitor.Enabled=true;
ThreadEmailInbox=new Thread(new ThreadStart(ThreadEmailInbox_Receive));
ThreadEmailInbox.Start();
StartEServiceMonitoring();
Plugins.HookAddCode(this,"FormOpenDental.Load_end");
}