예제 #1
0
파일: NR.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a NR.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public NR(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[2];
     data[0] = new NM(message,"Low Value");
     data[1] = new NM(message,"High Value");
 }
예제 #2
0
파일: MO.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a MO.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public MO(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[2];
     data[0] = new NM(message,"Quantity");
     data[1] = new ID(message, 0,"Denomination");
 }
예제 #3
0
파일: WVI.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a WVI.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public WVI(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[2];
     data[0] = new NM(message,"Channel Number");
     data[1] = new ST(message,"Channel Name");
 }
예제 #4
0
파일: DTN.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a DTN.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public DTN(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[2];
     data[0] = new IS(message, 149,"Day Type");
     data[1] = new NM(message,"Number of Days");
 }
예제 #5
0
파일: CQ.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a CQ.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public CQ(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[2];
     data[0] = new NM(message,"Quantity");
     data[1] = new CE(message,"Units");
 }
예제 #6
0
파일: DDI.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a DDI.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public DDI(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[3];
     data[0] = new NM(message,"Delay Days");
     data[1] = new MO(message,"Monetary Amount");
     data[2] = new NM(message,"Number of Days");
 }
예제 #7
0
파일: RCD.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a RCD.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public RCD(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[3];
     data[0] = new ST(message,"Segment Field Name");
     data[1] = new ID(message, 440,"HL7 Data Type");
     data[2] = new NM(message,"Maximum Column Width");
 }
예제 #8
0
파일: CCP.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a CCP.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public CCP(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[3];
     data[0] = new NM(message,"Channel Calibration Sensitivity Correction Factor");
     data[1] = new NM(message,"Channel Calibration Baseline");
     data[2] = new NM(message,"Channel Calibration Time Skew");
 }
예제 #9
0
파일: MOP.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a MOP.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public MOP(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[3];
     data[0] = new ID(message, 148,"Money or Percentage Indicator");
     data[1] = new NM(message,"Money or Percentage Quantity");
     data[2] = new ID(message, 0,"Currency Denomination");
 }
예제 #10
0
파일: PTA.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a PTA.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public PTA(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[4];
     data[0] = new IS(message, 147,"Policy Type");
     data[1] = new IS(message, 193,"Amount Class");
     data[2] = new NM(message,"Money or Percentage Quantity");
     data[3] = new MOP(message,"Money or Percentage");
 }
예제 #11
0
파일: SN.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a SN.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public SN(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[4];
     data[0] = new ST(message,"Comparator");
     data[1] = new NM(message,"Num1");
     data[2] = new ST(message,"Separator/Suffix");
     data[3] = new NM(message,"Num2");
 }
예제 #12
0
파일: ELD.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a ELD.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public ELD(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[4];
     data[0] = new ST(message,"Segment ID");
     data[1] = new NM(message,"Segment Sequence");
     data[2] = new NM(message,"Field Position");
     data[3] = new CE(message,"Code Identifying Error");
 }
예제 #13
0
파일: NA.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a NA.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public NA(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[4];
     data[0] = new NM(message,"Value1");
     data[1] = new NM(message,"Value2");
     data[2] = new NM(message,"Value3");
     data[3] = new NM(message,"Value4");
 }
예제 #14
0
파일: DLT.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a DLT.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public DLT(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[4];
     data[0] = new NR(message,"Normal Range");
     data[1] = new NM(message,"Numeric Threshold");
     data[2] = new ID(message, 523,"Change Computation");
     data[3] = new NM(message,"Days Retained");
 }
예제 #15
0
파일: ERL.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a ERL.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public ERL(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[6];
     data[0] = new ST(message,"Segment ID");
     data[1] = new NM(message,"Segment Sequence");
     data[2] = new NM(message,"Field Position");
     data[3] = new NM(message,"Field Repetition");
     data[4] = new NM(message,"Component Number");
     data[5] = new NM(message,"Sub-Component Number");
 }
예제 #16
0
파일: MA.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a MA.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public MA(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[6];
     data[0] = new NM(message,"Sample 1 From Channel 1");
     data[1] = new NM(message,"Sample 1 From Channel 2");
     data[2] = new NM(message,"Sample 1 From Channel N");
     data[3] = new NM(message,"Sample 2 From Channel 1");
     data[4] = new NM(message,"Sample 2 From Channel N");
     data[5] = new NM(message,"Sample N From Channel N");
 }
예제 #17
0
파일: CP.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a CP.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public CP(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[6];
     data[0] = new MO(message,"Price");
     data[1] = new ID(message, 205,"Price Type");
     data[2] = new NM(message,"From Value");
     data[3] = new NM(message,"To Value");
     data[4] = new CE(message,"Range Units");
     data[5] = new ID(message, 298,"Range Type");
 }
예제 #18
0
파일: CD.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a CD.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public CD(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[6];
     data[0] = new WVI(message,"Channel Identifier");
     data[1] = new WVS(message,"Waveform Source");
     data[2] = new CSU(message,"Channel Sensitivity/Units");
     data[3] = new CCP(message,"Channel Calibration Parameters");
     data[4] = new NM(message,"Channel Sampling Frequency");
     data[5] = new NR(message,"Minimum/Maximum Data Values");
 }
예제 #19
0
파일: CSU.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a CSU.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public CSU(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[7];
     data[0] = new NM(message,"Channel Sensitivity");
     data[1] = new ST(message,"Unit of Measure Identifier");
     data[2] = new ST(message,"Unit of Measure Description");
     data[3] = new ID(message, 396,"Unit of Measure Coding System");
     data[4] = new ST(message,"Alternate Unit of Measure Identifier");
     data[5] = new ST(message,"Alternate Unit of Measure Description");
     data[6] = new ID(message, 396,"Alternate Unit of Measure Coding System");
 }
예제 #20
0
파일: XON.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a XON.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public XON(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[10];
     data[0] = new ST(message,"Organization Name");
     data[1] = new IS(message, 204,"Organization Name Type Code");
     data[2] = new NM(message,"ID Number");
     data[3] = new NM(message,"Check Digit");
     data[4] = new ID(message, 61,"Check Digit Scheme");
     data[5] = new HD(message,"Assigning Authority");
     data[6] = new ID(message, 203,"Identifier Type Code");
     data[7] = new HD(message,"Assigning Facility");
     data[8] = new ID(message, 465,"Name Representation Code");
     data[9] = new ST(message,"Organization Identifier");
 }
예제 #21
0
파일: OSD.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a OSD.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public OSD(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[11];
     data[0] = new ID(message, 524,"Sequence/Results Flag");
     data[1] = new ST(message,"Placer Order Number: Entity Identifier");
     data[2] = new IS(message, 363,"Placer Order Number: Namespace ID");
     data[3] = new ST(message,"Filler Order Number: Entity Identifier");
     data[4] = new IS(message, 363,"Filler Order Number: Namespace ID");
     data[5] = new ST(message,"Sequence Condition Value");
     data[6] = new NM(message,"Maximum Number of Repeats");
     data[7] = new ST(message,"Placer Order Number: Universal ID");
     data[8] = new ID(message, 301,"Placer Order Number: Universal ID Type");
     data[9] = new ST(message,"Filler Order Number: Universal ID");
     data[10] = new ID(message, 301,"Filler Order Number: Universal ID Type");
 }
예제 #22
0
파일: RPT.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a RPT.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public RPT(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[11];
     data[0] = new CWE(message,"Repeat Pattern Code");
     data[1] = new ID(message, 527,"Calendar Alignment");
     data[2] = new NM(message,"Phase Range Begin Value");
     data[3] = new NM(message,"Phase Range End Value");
     data[4] = new NM(message,"Period Quantity");
     data[5] = new IS(message, 0,"Period Units");
     data[6] = new ID(message, 136,"Institution Specified Time");
     data[7] = new ID(message, 528,"Event");
     data[8] = new NM(message,"Event Offset Quantity");
     data[9] = new IS(message, 0,"Event Offset Units");
     data[10] = new GTS(message,"General Timing Specification");
 }
예제 #23
0
파일: TQ.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a TQ.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public TQ(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[12];
     data[0] = new CQ(message,"Quantity");
     data[1] = new RI(message,"Interval");
     data[2] = new ST(message,"Duration");
     data[3] = new TS(message,"Start Date/Time");
     data[4] = new TS(message,"End Date/Time");
     data[5] = new ST(message,"Priority");
     data[6] = new ST(message,"Condition");
     data[7] = new TX(message,"Text");
     data[8] = new ID(message, 472,"Conjunction");
     data[9] = new OSD(message,"Order Sequencing");
     data[10] = new CE(message,"Occurrence Duration");
     data[11] = new NM(message,"Total Occurrences");
 }
예제 #24
0
파일: XTN.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Creates a XTN.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public XTN(IMessage message, string description)
     : base(message, description)
 {
     data = new IType[12];
     data[0] = new ST(message,"Telephone Number");
     data[1] = new ID(message, 201,"Telecommunication Use Code");
     data[2] = new ID(message, 202,"Telecommunication Equipment Type");
     data[3] = new ST(message,"Email Address");
     data[4] = new NM(message,"Country Code");
     data[5] = new NM(message,"Area/City Code");
     data[6] = new NM(message,"Local Number");
     data[7] = new NM(message,"Extension");
     data[8] = new ST(message,"Any Text");
     data[9] = new ST(message,"Extension Prefix");
     data[10] = new ST(message,"Speed Dial Code");
     data[11] = new ST(message,"Unformatted Telephone number");
 }
예제 #25
0
파일: BTS.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Returns all repetitions of Batch Totals (BTS-3).
 ///</summary>
 public NM[] GetBatchTotals()
 {
     NM[] ret = null;
     try {
     IType[] t = this.GetField(3);
     ret = new NM[t.Length];
     for (int i = 0; i < ret.Length; i++) {
     ret[i] = (NM)t[i];
     }
     } catch (HL7Exception he) {
     HapiLogFactory.GetHapiLog(this.GetType()).Error("Unexpected problem obtaining field value.  This is a bug.", he);
     throw new System.Exception("An unexpected error ocurred", he);
     } catch (System.Exception cce) {
     HapiLogFactory.GetHapiLog(GetType()).Error("Unexpected problem obtaining field value.  This is a bug.", cce);
     throw new System.Exception("An unexpected error ocurred", cce);
       }
      return ret;
 }
예제 #26
0
파일: PSH.cs 프로젝트: snosrap/nhapi
 ///<summary>
 /// Returns all repetitions of Number of Product Experience Reports Filed by Distributor (PSH-14).
 ///</summary>
 public NM[] GetNumberOfProductExperienceReportsFiledByDistributor()
 {
     NM[] ret = null;
     try {
     IType[] t = this.GetField(14);
     ret = new NM[t.Length];
     for (int i = 0; i < ret.Length; i++) {
     ret[i] = (NM)t[i];
     }
     } catch (HL7Exception he) {
     HapiLogFactory.GetHapiLog(this.GetType()).Error("Unexpected problem obtaining field value.  This is a bug.", he);
     throw new System.Exception("An unexpected error ocurred", he);
     } catch (System.Exception cce) {
     HapiLogFactory.GetHapiLog(GetType()).Error("Unexpected problem obtaining field value.  This is a bug.", cce);
     throw new System.Exception("An unexpected error ocurred", cce);
       }
      return ret;
 }
예제 #27
0
파일: NR.cs 프로젝트: hongweichang/nHapi
 ///<summary>
 /// Creates a NR.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public NR(IMessage message, string description) : base(message, description)
 {
     data    = new IType[2];
     data[0] = new NM(message, "Low Value");
     data[1] = new NM(message, "High Value");
 }
예제 #28
0
파일: MO.cs 프로젝트: hongweichang/nHapi
 ///<summary>
 /// Creates a MO.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public MO(IMessage message, string description) : base(message, description)
 {
     data    = new IType[2];
     data[0] = new NM(message, "Quantity");
     data[1] = new ID(message, 0, "Denomination");
 }
예제 #29
0
 ///<summary>
 /// Creates a CQ.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public CQ(IMessage message, string description) : base(message, description)
 {
     data    = new IType[2];
     data[0] = new NM(message, "Quantity");
     data[1] = new CE(message, "Units");
 }
예제 #30
0
 ///<summary>
 /// Creates a WVI.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public WVI(IMessage message, string description) : base(message, description)
 {
     data    = new IType[2];
     data[0] = new NM(message, "Channel Number");
     data[1] = new ST(message, "Channel Name");
 }
예제 #31
0
 ///<summary>
 /// Creates a DTN.
 /// <param name="message">The Message to which this Type belongs</param>
 /// <param name="description">The description of this type</param>
 ///</summary>
 public DTN(IMessage message, string description) : base(message, description)
 {
     data    = new IType[2];
     data[0] = new IS(message, 149, "Day Type");
     data[1] = new NM(message, "Number of Days");
 }