public async void LoadInBackground(string gcodePathAndFileName, Action <double, string> progressReporter)
{
this.FileNameAndPath = gcodePathAndFileName;
loadedGCode = await GCodeFileLoaded.LoadInBackground(gcodePathAndFileName, progressReporter);
// backgroundWorker_RunWorkerCompleted
SetGCodeAfterLoad(loadedGCode);
DoneLoading?.Invoke(this, null);
}
private void SaveGCodeToNewLocation(string source, string dest)
{
try
{
if (ActiveSliceSettings.Instance.DoPrintLeveling)
{
GCodeFileLoaded unleveledGCode = new GCodeFileLoaded(source);
if (applyLeveling.Checked)
{
PrintLevelingData levelingData = ActiveSliceSettings.Instance.PrintLevelingData;
if (levelingData != null)
{
for (int lineIndex = 0; lineIndex < unleveledGCode.LineCount; lineIndex++)
{
PrinterMachineInstruction instruction = unleveledGCode.Instruction(lineIndex);
Vector3 currentDestination = instruction.Position;
List<string> linesToWrite = null;
switch (levelingData.CurrentPrinterLevelingSystem)
{
case PrintLevelingData.LevelingSystem.Probe2Points:
instruction.Line = LevelWizard2Point.ApplyLeveling(instruction.Line, currentDestination, instruction.movementType);
linesToWrite = LevelWizard2Point.ProcessCommand(instruction.Line);
break;
case PrintLevelingData.LevelingSystem.Probe3Points:
instruction.Line = LevelWizard3Point.ApplyLeveling(instruction.Line, currentDestination, instruction.movementType);
linesToWrite = LevelWizard3Point.ProcessCommand(instruction.Line);
break;
case PrintLevelingData.LevelingSystem.Probe7PointRadial:
instruction.Line = LevelWizard7PointRadial.ApplyLeveling(instruction.Line, currentDestination, instruction.movementType);
linesToWrite = LevelWizard7PointRadial.ProcessCommand(instruction.Line);
break;
case PrintLevelingData.LevelingSystem.Probe13PointRadial:
instruction.Line = LevelWizard13PointRadial.ApplyLeveling(instruction.Line, currentDestination, instruction.movementType);
linesToWrite = LevelWizard13PointRadial.ProcessCommand(instruction.Line);
break;
default:
throw new NotImplementedException();
}
instruction.Line = linesToWrite[0];
linesToWrite.RemoveAt(0);
// now insert any new lines
foreach (string line in linesToWrite)
{
PrinterMachineInstruction newInstruction = new PrinterMachineInstruction(line);
unleveledGCode.Insert(++lineIndex, newInstruction);
}
}
}
}
unleveledGCode.Save(dest);
}
else
{
File.Copy(source, dest, true);
}
ShowFileIfRequested(dest);
}
catch
{
}
}
private void SaveGCodeToNewLocation(string source, string dest)
{
if (ActivePrinterProfile.Instance.DoPrintLeveling)
{
GCodeFileLoaded unleveledGCode = new GCodeFileLoaded(source);
if (applyLeveling.Checked)
{
PrintLevelingPlane.Instance.ApplyLeveling(unleveledGCode);
PrintLevelingData levelingData = PrintLevelingData.GetForPrinter(ActivePrinterProfile.Instance.ActivePrinter);
if (levelingData != null)
{
for (int lineIndex = 0; lineIndex < unleveledGCode.LineCount; lineIndex++)
{
PrinterMachineInstruction instruction = unleveledGCode.Instruction(lineIndex);
List<string> linesToWrite = null;
switch (levelingData.levelingSystem)
{
case PrintLevelingData.LevelingSystem.Probe2Points:
linesToWrite = LevelWizard2Point.ProcessCommand(instruction.Line);
break;
case PrintLevelingData.LevelingSystem.Probe3Points:
linesToWrite = LevelWizard3Point.ProcessCommand(instruction.Line);
break;
}
instruction.Line = linesToWrite[0];
linesToWrite.RemoveAt(0);
// now insert any new lines
foreach (string line in linesToWrite)
{
PrinterMachineInstruction newInstruction = new PrinterMachineInstruction(line);
unleveledGCode.Insert(++lineIndex, newInstruction);
}
}
}
}
unleveledGCode.Save(dest);
}
else
{
File.Copy(source, dest, true);
}
ShowFileIfRequested(dest);
}
public static void ParseFileContents(object sender, DoWorkEventArgs doWorkEventArgs)
{
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
string gCodeString = (string)doWorkEventArgs.Argument;
if (gCodeString == null)
{
return;
}
Stopwatch loadTime = Stopwatch.StartNew();
BackgroundWorker backgroundWorker = sender as BackgroundWorker;
Stopwatch maxProgressReport = new Stopwatch();
maxProgressReport.Start();
PrinterMachineInstruction machineInstructionForLine = new PrinterMachineInstruction("None");
bool gcodeHasExplicitLayerChangeInfo = false;
if (gCodeString.Contains("; LAYER:"))
{
gcodeHasExplicitLayerChangeInfo = true;
}
GCodeFileLoaded loadedGCodeFile = new GCodeFileLoaded(gcodeHasExplicitLayerChangeInfo);
int crCount = CountNumLines(gCodeString);
int lineIndex = 0;
foreach (string outputString in CustomSplit(gCodeString, '\n'))
{
string lineString = outputString.Trim();
machineInstructionForLine = new PrinterMachineInstruction(lineString, machineInstructionForLine, false);
if (lineString.Length > 0)
{
switch (lineString[0])
{
case 'G':
loadedGCodeFile.ParseGLine(lineString, machineInstructionForLine);
break;
case 'M':
loadedGCodeFile.ParseMLine(lineString, machineInstructionForLine);
break;
case 'T':
double extruderIndex = 0;
if (GetFirstNumberAfter("T", lineString, ref extruderIndex))
{
machineInstructionForLine.ExtruderIndex = (int)extruderIndex;
}
break;
case ';':
if (gcodeHasExplicitLayerChangeInfo && lineString.StartsWith("; LAYER:"))
{
loadedGCodeFile.IndexOfChangeInZ.Add(loadedGCodeFile.GCodeCommandQueue.Count);
}
if (lineString.StartsWith("; layerThickness"))
{
loadedGCodeFile.layerThickness = double.Parse(lineString.Split('=')[1]);
}
else if (lineString.StartsWith("; firstLayerThickness"))
{
loadedGCodeFile.firstLayerThickness = double.Parse(lineString.Split('=')[1]);
}
break;
case '@':
break;
default:
#if DEBUG
throw new NotImplementedException();
#else
break;
#endif
}
}
loadedGCodeFile.GCodeCommandQueue.Add(machineInstructionForLine);
if (backgroundWorker != null)
{
if (backgroundWorker.CancellationPending)
{
return;
}
if (backgroundWorker.WorkerReportsProgress && maxProgressReport.ElapsedMilliseconds > 200)
{
backgroundWorker.ReportProgress(lineIndex * 100 / crCount / 2);
maxProgressReport.Restart();
}
}
lineIndex++;
}
loadedGCodeFile.AnalyzeGCodeLines(backgroundWorker);
doWorkEventArgs.Result = loadedGCodeFile;
loadTime.Stop();
Console.WriteLine("Time To Load Seconds: {0:0.00}".FormatWith(loadTime.Elapsed.TotalSeconds));
}
private void sliceItem_Done(object sender, EventArgs e)
{
PrintItemWrapper sliceItem = (PrintItemWrapper)sender;
sliceItem.SlicingDone -= sliceItem_Done;
sliceItem.SlicingOutputMessage -= printItemWrapper_SlicingOutputMessage;
if (File.Exists(sliceItem.FileLocation))
{
savedGCodeFileNames.Add(sliceItem.GetGCodePathAndFileName());
}
itemCountBeingWorkedOn++;
if (itemCountBeingWorkedOn < allFilesToExport.Count)
{
if (StartingNextPart != null)
{
StartingNextPart(this, new StringEventArgs(ItemNameBeingWorkedOn));
}
}
else
{
if (UpdatePartStatus != null)
{
UpdatePartStatus(this, new StringEventArgs("Calculating Total cm3..."));
}
if (savedGCodeFileNames.Count > 0)
{
double total = 0;
foreach (string gcodeFileName in savedGCodeFileNames)
{
string[] lines = File.ReadAllLines(gcodeFileName);
if (lines.Length > 0)
{
string filamentAmountLine = lines[lines.Length - 1];
bool foundAmountInGCode = false;
int startPos = filamentAmountLine.IndexOf("(");
if (startPos > 0)
{
int endPos = filamentAmountLine.IndexOf("cm3)", startPos);
if (endPos > 0)
{
string value = filamentAmountLine.Substring(startPos + 1, endPos - (startPos + 1));
double amountForThisFile;
if (double.TryParse(value, out amountForThisFile))
{
foundAmountInGCode = true;
total += amountForThisFile;
}
}
}
}
}
PrintLevelingData levelingData = PrintLevelingData.GetForPrinter(ActivePrinterProfile.Instance.ActivePrinter);
// now copy all the gcode to the path given
for (int i = 0; i < savedGCodeFileNames.Count; i++)
{
string savedGcodeFileName = savedGCodeFileNames[i];
string originalFileName = Path.GetFileName(allFilesToExport[i].Name);
string outputFileName = Path.ChangeExtension(originalFileName, ".gcode");
string outputPathAndName = Path.Combine(exportPath, outputFileName);
if (ActivePrinterProfile.Instance.DoPrintLeveling)
{
GCodeFileLoaded unleveledGCode = new GCodeFileLoaded(savedGcodeFileName);
for (int j = 0; j < unleveledGCode.LineCount; j++)
{
PrinterMachineInstruction instruction = unleveledGCode.Instruction(j);
Vector3 currentDestination = instruction.Position;
switch (levelingData.CurrentPrinterLevelingSystem)
{
case PrintLevelingData.LevelingSystem.Probe2Points:
instruction.Line = LevelWizard2Point.ApplyLeveling(instruction.Line, currentDestination, instruction.movementType);
break;
case PrintLevelingData.LevelingSystem.Probe3Points:
instruction.Line = LevelWizard3Point.ApplyLeveling(instruction.Line, currentDestination, instruction.movementType);
break;
case PrintLevelingData.LevelingSystem.Probe7PointRadial:
instruction.Line = LevelWizard7PointRadial.ApplyLeveling(instruction.Line, currentDestination, instruction.movementType);
break;
default:
throw new NotImplementedException();
}
}
unleveledGCode.Save(outputPathAndName);
}
else
{
File.Copy(savedGcodeFileName, outputPathAndName, true);
}
}
if (DoneSaving != null)
{
DoneSaving(this, new StringEventArgs(string.Format("{0:0.0}", total)));
}
}
}
}
private void sliceItem_Done(object sender, EventArgs e)
{
PrintItemWrapper sliceItem = (PrintItemWrapper)sender;
sliceItem.SlicingDone.UnregisterEvent(sliceItem_Done, ref unregisterEvents);
sliceItem.SlicingOutputMessage.UnregisterEvent(printItemWrapper_SlicingOutputMessage, ref unregisterEvents);
if (File.Exists(sliceItem.FileLocation))
{
savedGCodeFileNames.Add(sliceItem.GetGCodePathAndFileName());
}
itemCountBeingWorkedOn++;
if (itemCountBeingWorkedOn < allFilesToExport.Count)
{
if (StartingNextPart != null)
{
StartingNextPart(this, new StringEventArgs(ItemNameBeingWorkedOn));
}
}
else
{
if (UpdatePartStatus != null)
{
UpdatePartStatus(this, new StringEventArgs("Calculating Total cm3..."));
}
if (savedGCodeFileNames.Count > 0)
{
double total = 0;
foreach (string gcodeFileName in savedGCodeFileNames)
{
string[] lines = File.ReadAllLines(gcodeFileName);
if (lines.Length > 0)
{
string filamentAmountLine = lines[lines.Length - 1];
bool foundAmountInGCode = false;
int startPos = filamentAmountLine.IndexOf("(");
if (startPos > 0)
{
int endPos = filamentAmountLine.IndexOf("cm3)", startPos);
if (endPos > 0)
{
string value = filamentAmountLine.Substring(startPos + 1, endPos - (startPos + 1));
double amountForThisFile;
if (double.TryParse(value, out amountForThisFile))
{
foundAmountInGCode = true;
total += amountForThisFile;
}
}
}
}
}
// now copy all the gcode to the path given
for (int i = 0; i < savedGCodeFileNames.Count; i++)
{
string savedGcodeFileName = savedGCodeFileNames[i];
string originalFileName = Path.GetFileName(allFilesToExport[i].Name);
string outputFileName = Path.ChangeExtension(originalFileName, ".gcode");
string outputPathAndName = Path.Combine(exportPath, outputFileName);
if (ActivePrinterProfile.Instance.DoPrintLeveling)
{
GCodeFileLoaded unleveledGCode = new GCodeFileLoaded(savedGcodeFileName);
PrintLevelingPlane.Instance.ApplyLeveling(unleveledGCode);
unleveledGCode.Save(outputPathAndName);
}
else
{
File.Copy(savedGcodeFileName, outputPathAndName, true);
}
}
if (DoneSaving != null)
{
DoneSaving(this, new StringEventArgs(string.Format("{0:0.0}", total)));
}
}
}
}
private void sliceItem_Done(object sender, EventArgs e)
{
PrintItemWrapper sliceItem = (PrintItemWrapper)sender;
sliceItem.SlicingDone -= sliceItem_Done;
sliceItem.SlicingOutputMessage -= printItemWrapper_SlicingOutputMessage;
if (File.Exists(sliceItem.FileLocation))
{
savedGCodeFileNames.Add(sliceItem.GetGCodePathAndFileName());
}
itemCountBeingWorkedOn++;
if (itemCountBeingWorkedOn < allFilesToExport.Count)
{
if (StartingNextPart != null)
{
StartingNextPart(this, new StringEventArgs(ItemNameBeingWorkedOn));
}
}
else
{
if (UpdatePartStatus != null)
{
UpdatePartStatus(this, new StringEventArgs("Calculating Total fillament mm..."));
}
if (savedGCodeFileNames.Count > 0)
{
double total = 0;
foreach (string gcodeFileName in savedGCodeFileNames)
{
string allContent = File.ReadAllText(gcodeFileName);
if (allContent.Length > 0)
{
string searchString = "filament used =";
int startPos = allContent.IndexOf(searchString);
if (startPos > 0)
{
int endPos = Math.Min(allContent.IndexOf("\n", startPos), allContent.IndexOf("mm", startPos));
if (endPos > 0)
{
string value = allContent.Substring(startPos + searchString.Length, endPos - startPos - searchString.Length);
double amountForThisFile;
if (double.TryParse(value, out amountForThisFile))
{
total += amountForThisFile;
}
}
}
}
}
PrintLevelingData levelingData = ActiveSliceSettings.Instance.Helpers.GetPrintLevelingData();
// now copy all the gcode to the path given
for (int i = 0; i < savedGCodeFileNames.Count; i++)
{
string savedGcodeFileName = savedGCodeFileNames[i];
string originalFileName = Path.GetFileName(allFilesToExport[i].Name);
string outputFileName = Path.ChangeExtension(originalFileName, ".gcode");
string outputPathAndName = Path.Combine(exportPath, outputFileName);
if (ActiveSliceSettings.Instance.GetValue<bool>(SettingsKey.print_leveling_enabled))
{
GCodeFileLoaded unleveledGCode = new GCodeFileLoaded(savedGcodeFileName);
for (int j = 0; j < unleveledGCode.LineCount; j++)
{
PrinterMachineInstruction instruction = unleveledGCode.Instruction(j);
Vector3 currentDestination = instruction.Position;
switch (levelingData.CurrentPrinterLevelingSystem)
{
case PrintLevelingData.LevelingSystem.Probe3Points:
instruction.Line = LevelWizard3Point.ApplyLeveling(instruction.Line, currentDestination, instruction.movementType);
break;
case PrintLevelingData.LevelingSystem.Probe7PointRadial:
instruction.Line = LevelWizard7PointRadial.ApplyLeveling(instruction.Line, currentDestination, instruction.movementType);
break;
case PrintLevelingData.LevelingSystem.Probe13PointRadial:
instruction.Line = LevelWizard13PointRadial.ApplyLeveling(instruction.Line, currentDestination, instruction.movementType);
break;
default:
throw new NotImplementedException();
}
}
unleveledGCode.Save(outputPathAndName);
}
else
{
File.Copy(savedGcodeFileName, outputPathAndName, true);
}
}
if (DoneSaving != null)
{
DoneSaving(this, new StringEventArgs(string.Format("{0:0.0}", total)));
}
}
}
}