public void TestLoadMSLU()
{
Console.WriteLine("TestLoadUnicows");
if (File.Exists(dotNetInstallerExeUtils.RunOptions.DefaultLogFile))
File.Delete(dotNetInstallerExeUtils.RunOptions.DefaultLogFile);
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
dotNetInstallerExeUtils.RunOptions options = new dotNetInstallerExeUtils.RunOptions(configFilename);
options.loadMSLU = true;
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(options));
File.Delete(configFilename);
string[] logLines = File.ReadAllLines(dotNetInstallerExeUtils.RunOptions.DefaultLogFile);
Console.WriteLine(logLines[0]);
Assert.IsTrue(logLines[0].Contains("Loaded MSLU:"));
string[] msluLine = logLines[0].Split(":".ToCharArray());
string msluAddress = msluLine[msluLine.Length - 1].Trim();
Console.WriteLine("MSLU loaded at: " + msluAddress);
Assert.IsTrue(Int32.Parse(msluAddress, System.Globalization.NumberStyles.HexNumber) > 0);
File.Delete(dotNetInstallerExeUtils.RunOptions.DefaultLogFile);
}
public void TestRebootExitCode()
{
Console.WriteLine("TestRebootExitCode");
// reboot exit code doesn't override a previous error
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
ComponentCmd cmd_error = new ComponentCmd();
cmd_error.command = "cmd.exe /C exit /b 42";
cmd_error.required_install = true;
cmd_error.allow_continue_on_error = true;
cmd_error.default_continue_on_error = true;
setupConfiguration.Children.Add(cmd_error);
ComponentCmd cmd_reboot = new ComponentCmd();
cmd_reboot.command = "cmd.exe /C exit /b 3010";
cmd_error.required_install = true;
cmd_reboot.returncodes_reboot = "3010";
setupConfiguration.Children.Add(cmd_reboot);
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
Assert.AreEqual(42, dotNetInstallerExeUtils.Run(configFilename));
File.Delete(configFilename);
dotNetInstallerExeUtils.DisableRunOnReboot();
}
public void TestAutoStart()
{
Console.WriteLine("TestAutoStart");
ConfigFile configFile = new ConfigFile();
// setup configuration
SetupConfiguration setupConfiguration = new SetupConfiguration();
setupConfiguration.auto_start = true;
setupConfiguration.auto_close_if_installed = true;
setupConfiguration.installation_completed = string.Empty;
setupConfiguration.installation_none = string.Empty;
configFile.Children.Add(setupConfiguration);
// marker that makes installed check succeeed after installation
string markerFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString());
// dummy component
ComponentCmd component = new ComponentCmd();
setupConfiguration.Children.Add(component);
component.command = string.Format("cmd.exe /C dir > \"{0}\"", markerFilename);
InstalledCheckFile check = new InstalledCheckFile();
check.filename = markerFilename;
check.comparison = installcheckfile_comparison.exists;
component.Children.Add(check);
// configuration
component.installcompletemessage = string.Empty;
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
dotNetInstallerExeUtils.RunOptions options = new dotNetInstallerExeUtils.RunOptions(configFilename);
options.quiet = false;
options.reboot = false;
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(options));
Assert.IsTrue(File.Exists(markerFilename));
File.Delete(configFilename);
File.Delete(markerFilename);
}
public void TestAllArgCmd()
{
Console.WriteLine("TestAllArgCmd");
ConfigFile configFile = new ConfigFile();
// setup configuration
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
ComponentCmd component1 = new ComponentCmd();
setupConfiguration.Children.Add(component1);
component1.id = "cmd1";
component1.display_name = "command 1";
component1.command = "cmd.exe /C exit /b ";
component1.required_install = true;
ComponentCmd component2 = new ComponentCmd();
setupConfiguration.Children.Add(component2);
component2.id = "cmd2";
component2.display_name = "command 2";
component2.command = "cmd.exe /C exit /b ";
component2.required_install = true;
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
dotNetInstallerExeUtils.RunOptions options = new dotNetInstallerExeUtils.RunOptions(configFilename);
options.args = "/ComponentArgs *:\"23\"";
Assert.AreEqual(23, dotNetInstallerExeUtils.Run(options));
File.Delete(configFilename);
}
public void TestFailingComponent()
{
Console.WriteLine("TestFailingComponent");
// a configuration with a component that fails, complete command is not executed
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
string markerFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".tmp");
setupConfiguration.complete_command = string.Format("cmd.exe /C dir > \"{0}\"", markerFilename);
setupConfiguration.complete_command_basic = setupConfiguration.complete_command;
setupConfiguration.complete_command_silent = setupConfiguration.complete_command;
ComponentCmd component = new ComponentCmd();
setupConfiguration.Children.Add(component);
component.command = "cmd.exe /C exit /b 123";
component.required_install = true;
// save config file
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// execute dotNetInstaller
Assert.AreEqual(123, dotNetInstallerExeUtils.Run(configFilename));
File.Delete(configFilename);
Assert.IsFalse(File.Exists(markerFilename));
}
public void TestDisplayCab()
{
Console.WriteLine("TestDisplayCab");
// create a self-extracting bootstrapper
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
InstallerLinkerArguments args = new InstallerLinkerArguments();
args.config = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", args.config);
configFile.SaveAs(args.config);
args.embed = true;
args.apppath = Path.GetTempPath();
// args.embedFiles = new string[] { Path.GetFileName(args.config) };
args.output = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".exe");
args.template = dotNetInstallerExeUtils.Executable;
Console.WriteLine("Linking '{0}'", args.output);
InstallerLinkerExeUtils.CreateInstaller(args);
Assert.IsTrue(File.Exists(args.output));
// execute dotNetInstaller
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(args.output, "/DisplayCab /qb"));
File.Delete(args.config);
File.Delete(args.output);
}
public void TestLogConfigSpecified()
{
Console.WriteLine("TestLogConfigSpecified");
if (File.Exists(dotNetInstallerExeUtils.RunOptions.DefaultLogFile))
File.Delete(dotNetInstallerExeUtils.RunOptions.DefaultLogFile);
ConfigFile configFile = new ConfigFile();
configFile.log_enabled = true;
configFile.log_file = Path.Combine(Path.GetTempPath(), "TestLogConfigSpecified.log");
if (File.Exists(configFile.log_file))
File.Delete(configFile.log_file);
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
dotNetInstallerExeUtils.RunOptions options = new dotNetInstallerExeUtils.RunOptions(configFilename);
options.log = false;
options.logfile = string.Empty;
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(options));
File.Delete(configFilename);
Assert.IsFalse(File.Exists(dotNetInstallerExeUtils.RunOptions.DefaultLogFile));
Assert.IsTrue(File.Exists(configFile.log_file));
File.Delete(configFile.log_file);
}
public void TestDefaultSelectionInstall()
{
Console.WriteLine("TestDefaultSelectionInstall");
ConfigFile configFile = new ConfigFile();
// setup configuration
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
// dummy component 1
ComponentCmd component1 = new ComponentCmd();
setupConfiguration.Children.Add(component1);
component1.command = "cmd.exe /C exit /b 57";
component1.required_install = true;
component1.selected_install = false;
// dummy component 2
ComponentCmd component2 = new ComponentCmd();
setupConfiguration.Children.Add(component2);
component2.command = "cmd.exe /C exit /b 42";
component2.required_install = true;
component2.selected_install = true;
// second component is selected and runs, not the first one
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
dotNetInstallerExeUtils.RunOptions options = new dotNetInstallerExeUtils.RunOptions(configFilename);
Assert.AreEqual(42, dotNetInstallerExeUtils.Run(options));
// first component is selected and runs
component1.selected_install = true;
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
Assert.AreEqual(57, dotNetInstallerExeUtils.Run(options));
File.Delete(configFilename);
}
public void HideComponentIfInstalled_WithComponentAlreadyInstalledDuringInstallSequence_HidesComponent()
{
string dotNetInstallerExeFilePath = dotNetInstallerExeUtils.Executable;
bool usingHtmlInstaller = dotNetInstallerExeFilePath.EndsWith("htmlInstaller.exe");
// create configuration file
ConfigFile configFile = new ConfigFile();
// add a setup configuration
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
// add a component that is hidden if it's already installed
ComponentCmd componentAlreadyInstalled = new ComponentCmd();
componentAlreadyInstalled.hide_component_if_installed = true;
setupConfiguration.Children.Add(componentAlreadyInstalled);
// make the component appear to be already installed
InstalledCheckFile existsCheck = new InstalledCheckFile();
existsCheck.filename = dotNetInstallerExeUtils.Executable;
existsCheck.comparison = installcheckfile_comparison.exists;
componentAlreadyInstalled.Children.Add(existsCheck);
// add another component that is not already installed
ComponentCmd componentNotInstalled = new ComponentCmd();
setupConfiguration.Children.Add(componentNotInstalled);
// save the configuration file
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
configFile.SaveAs(configFilename);
// execute dotNetInstaller
string arguments = string.Format("/ConfigFile {0}", configFilename);
using (Application dotNetInstaller = Application.Launch(new ProcessStartInfo(dotNetInstallerExeFilePath, arguments)))
{
// get the main install window
Window mainWindow = dotNetInstaller.GetWindow("APPLICATION_NAME Installer", InitializeOption.NoCache);
if (usingHtmlInstaller)
{
// get all the checkboxes in the window
IUIItem[] checkBoxes = mainWindow.GetMultiple(SearchCriteria.ByControlType(typeof(CheckBox)));
// assert that there's only one checkbox
Assert.AreEqual(1, checkBoxes.Length);
Assert.AreEqual("command1 ", checkBoxes[0].Name);
}
else
{
// using dotNetInstaller
// get the components list box
ListBox componentsList = mainWindow.Get<ListBox>();
// assert that only one component is in the list
Assert.AreEqual(1, componentsList.Items.Count);
Assert.AreEqual("command1 ", componentsList.Items[0].Name);
}
}
}
public void TestRunFileConfiguration()
{
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
string configFileName = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFileName);
configFile.SaveAs(configFileName);
try
{
ProcessStartInfo pi = new ProcessStartInfo(InstallerEditorExeUtils.Executable, "\"" + configFileName + "\"");
using (Application installerEditor = Application.Launch(pi))
{
string title = string.Format("Installer Editor - {0}", configFileName);
Window mainWindow = installerEditor.GetWindow(title, InitializeOption.NoCache);
Tree configurationTree = UIAutomation.Find<Tree>(mainWindow, "configurationTree");
Assert.AreEqual("Config File", configurationTree.SelectedNode.Name);
StatusStrip statusStrip = UIAutomation.Find<StatusStrip>(mainWindow, "statusStrip");
WinFormTextBox statusLabel = (WinFormTextBox)statusStrip.Items[0];
Assert.AreEqual(string.Format("Loaded {0}", configFileName), statusLabel.Text);
}
}
finally
{
File.Delete(configFileName);
}
}
public void TestLogAcceptsPathVariables()
{
Console.WriteLine("TestLogAcceptsPathVariables");
string resolved_logfile = Path.Combine(Path.GetTempPath(), "TestLogAcceptsPathVariables.log");
if (File.Exists(dotNetInstallerExeUtils.RunOptions.DefaultLogFile))
File.Delete(dotNetInstallerExeUtils.RunOptions.DefaultLogFile);
if (File.Exists(resolved_logfile))
File.Delete(resolved_logfile);
ConfigFile configFile = new ConfigFile();
configFile.log_enabled = true;
configFile.log_file = @"#TEMPPATH\TestLogAcceptsPathVariables.log";
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
dotNetInstallerExeUtils.RunOptions options = new dotNetInstallerExeUtils.RunOptions(configFilename);
options.log = false;
options.logfile = string.Empty;
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(options));
File.Delete(configFilename);
Assert.IsTrue(File.Exists(resolved_logfile), string.Format("Missing {0}", resolved_logfile));
Assert.IsFalse(File.Exists(dotNetInstallerExeUtils.RunOptions.DefaultLogFile));
File.Delete(resolved_logfile);
}
public void TestComponentWithoutCheck()
{
// a configuration with an optional component, complete command is executed
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
string markerFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString());
setupConfiguration.supports_uninstall = false; // otherwise would automatically switch to uninstall
setupConfiguration.complete_command = string.Format("cmd.exe /C dir > \"{0}.ui\"", markerFilename);
setupConfiguration.complete_command_basic = string.Format("cmd.exe /C dir > \"{0}.basic\"", markerFilename);
setupConfiguration.complete_command_silent = string.Format("cmd.exe /C dir > \"{0}.silent\"", markerFilename);
configFile.Children.Add(setupConfiguration);
// required component that will run, but has no installed check
ComponentCmd cmd1 = new ComponentCmd();
setupConfiguration.Children.Add(cmd1);
cmd1.command = "cmd.exe /C exit /b 0";
// save config file
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// execute dotNetInstaller
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(configFilename));
File.Delete(configFilename);
Assert.IsFalse(File.Exists(markerFilename + ".silent"));
File.Delete(markerFilename);
}
public void TestPromptForOptionalNotSet()
{
Console.WriteLine("TestPromptForOptionalNotSet");
// configuration with a required and optional component that will auto-start
// and won't prompt or execute the optional component
string markerFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString());
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
setupConfiguration.auto_start = true;
setupConfiguration.auto_close_if_installed = true;
setupConfiguration.prompt_for_optional_components = false;
setupConfiguration.installation_completed = "";
setupConfiguration.installation_none = "";
configFile.Children.Add(setupConfiguration);
// dummy required component
ComponentCmd component_required = new ComponentCmd();
setupConfiguration.Children.Add(component_required);
component_required.required_install = true;
component_required.supports_install = true;
component_required.command = "dummy";
InstalledCheckRegistry check_required = new InstalledCheckRegistry();
check_required.fieldname = "";
check_required.path = "SOFTWARE";
check_required.comparison = installcheckregistry_comparison.exists;
component_required.Children.Add(check_required);
// dummy optional component
ComponentCmd component_optional = new ComponentCmd();
setupConfiguration.Children.Add(component_optional);
component_optional.required_install = false;
component_optional.supports_install = true;
component_optional.command = string.Format("cmd.exe /C dir > \"{0}\"", markerFilename);
InstalledCheckFile check_optional = new InstalledCheckFile();
check_optional.filename = markerFilename;
check_optional.comparison = installcheckfile_comparison.exists;
component_optional.Children.Add(check_optional);
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// will not auto close since all components installed successfully
dotNetInstallerExeUtils.RunOptions options = new dotNetInstallerExeUtils.RunOptions(configFilename);
options.quiet = false;
options.autostart = true;
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(options));
Assert.IsFalse(File.Exists(markerFilename));
File.Delete(configFilename);
}
public void TestEmbedSplashScreen()
{
InstallerLinkerArguments args = new InstallerLinkerArguments();
try
{
Uri uri = new Uri(Assembly.GetExecutingAssembly().CodeBase);
string binPath = Path.GetDirectoryName(HttpUtility.UrlDecode(uri.AbsolutePath));
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
ComponentCmd cmd = new ComponentCmd();
cmd.command = "cmd.exe /C exit /b 0";
setupConfiguration.Children.Add(cmd);
args.config = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", args.config);
configFile.SaveAs(args.config);
args.output = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".exe");
Console.WriteLine("Linking '{0}'", args.output);
args.template = dotNetInstallerExeUtils.Executable;
string relativePathName = "res";
bool usingHtmlInstaller = dotNetInstallerExeUtils.Executable.EndsWith("htmlInstaller.exe");
if (usingHtmlInstaller)
{
relativePathName = "Html";
}
args.splash = Path.Combine(dotNetInstallerExeUtils.Location, string.Format(@"..\{0}\banner.bmp", relativePathName));
InstallerLib.InstallerLinker.CreateInstaller(args);
// check that the linker generated output
Assert.IsTrue(File.Exists(args.output));
Assert.IsTrue(new FileInfo(args.output).Length > 0);
using (ResourceInfo ri = new ResourceInfo())
{
ri.Load(args.output);
Assert.IsTrue(ri.Resources.ContainsKey(new ResourceId("CUSTOM")));
List<Resource> custom = ri.Resources[new ResourceId("CUSTOM")];
Assert.AreEqual("RES_BANNER", custom[0].Name.Name);
Assert.AreEqual("RES_CONFIGURATION", custom[1].Name.ToString());
Assert.AreEqual("RES_SPLASH", custom[2].Name.ToString());
}
// execute with and without splash
dotNetInstallerExeUtils.Run(args.output, "/qb");
dotNetInstallerExeUtils.Run(args.output, "/qb /nosplash");
}
finally
{
if (File.Exists(args.config))
File.Delete(args.config);
if (File.Exists(args.output))
File.Delete(args.output);
}
}
public void TestContinueOnErrorNoMessage()
{
Console.WriteLine("TestContinueOnErrorNoMessage");
// test that with all failed_exec_command_continue blanked,
// user is never asked a question in full UI mode (not blocked)
ConfigFile configFile = new ConfigFile();
string markerFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString());
string markerFilename1 = string.Format("{0}.1", markerFilename);
string markerFilename2 = string.Format("{0}.2", markerFilename);
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
// running in full UI mode, auto-start
setupConfiguration.auto_start = true;
// running in full UI mode, installation is expected to fail, auto-close
setupConfiguration.auto_close_on_error = true;
setupConfiguration.installation_none = string.Empty;
setupConfiguration.installation_completed = string.Empty;
ComponentCmd cmd1 = new ComponentCmd();
setupConfiguration.Children.Add(cmd1);
cmd1.command = string.Format("cmd.exe /C dir > \"{0}\" & exit /b 1", markerFilename1);
cmd1.required_install = true;
ComponentCmd cmd2 = new ComponentCmd();
setupConfiguration.Children.Add(cmd2);
cmd2.command = string.Format("cmd.exe /C dir > \"{0}\" & exit /b 2", markerFilename2);
cmd2.required_install = true;
// continue on error by default -> continues on the first and the second component, returns the last error code
cmd1.default_continue_on_error = true;
cmd2.default_continue_on_error = true;
// remove all continue or stop error messages
setupConfiguration.failed_exec_command_continue = "";
cmd1.failed_exec_command_continue = "";
cmd1.failed_exec_command_continue = "";
cmd2.failed_exec_command_continue = "";
// save config file
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// the return code of the first failure is saved
dotNetInstallerExeUtils.RunOptions options = new dotNetInstallerExeUtils.RunOptions(configFilename);
// all continue error messages are blank, nothing should popup to block the test
options.quiet = false;
Assert.AreEqual(1, dotNetInstallerExeUtils.Run(options));
Assert.IsTrue(File.Exists(markerFilename1));
Assert.IsTrue(File.Exists(markerFilename2));
File.Delete(markerFilename1);
File.Delete(markerFilename2);
File.Delete(configFilename);
}
public void TestConfigLangID()
{
ConfigFile configFile = new ConfigFile();
SetupConfiguration configuration = new SetupConfiguration();
configFile.Children.Add(configuration);
ComponentCmd cmd = new ComponentCmd();
cmd.command = "cmd.exe /C exit /b #LANGID";
cmd.required_install = true;
configuration.language_id = "1234";
configuration.Children.Add(cmd);
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
Assert.AreEqual(1234, dotNetInstallerExeUtils.Run(configFilename));
File.Delete(configFilename);
}
public void TestNoComponentsSuccess()
{
Console.WriteLine("TestNoComponentsSuccess");
// a configuration with no components
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
// save config file
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// execute dotNetInstaller
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(configFilename));
File.Delete(configFilename);
}
public void TestContinueOnError()
{
Console.WriteLine("TestContinueOnError");
ConfigFile configFile = new ConfigFile();
string markerFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString());
string markerFilename1 = string.Format("{0}.1", markerFilename);
string markerFilename2 = string.Format("{0}.2", markerFilename);
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
ComponentCmd cmd1 = new ComponentCmd();
setupConfiguration.Children.Add(cmd1);
cmd1.command = string.Format("cmd.exe /C dir > \"{0}\" & exit /b 1", markerFilename1);
cmd1.required_install = true;
ComponentCmd cmd2 = new ComponentCmd();
setupConfiguration.Children.Add(cmd2);
cmd2.command = string.Format("cmd.exe /C dir > \"{0}\" & exit /b 2", markerFilename2);
cmd2.required_install = true;
// save config file
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// execute dotNetInstaller
Assert.AreEqual(1, dotNetInstallerExeUtils.Run(configFilename));
Assert.IsTrue(File.Exists(markerFilename1));
Assert.IsFalse(File.Exists(markerFilename2));
File.Delete(markerFilename1);
// allow continue on error (user prompted) -> no effect, this is a prompt that defaults to false in silent mode
cmd1.allow_continue_on_error = true;
cmd2.allow_continue_on_error = true;
configFile.SaveAs(configFilename);
Assert.AreEqual(1, dotNetInstallerExeUtils.Run(configFilename));
Assert.IsTrue(File.Exists(markerFilename1));
Assert.IsFalse(File.Exists(markerFilename2));
File.Delete(markerFilename1);
// continue on error by default -> continues on the first and the second component, returns the last error code
cmd1.default_continue_on_error = true;
cmd2.default_continue_on_error = true;
configFile.SaveAs(configFilename);
// the return code of the first failure is saved
Assert.AreEqual(1, dotNetInstallerExeUtils.Run(configFilename));
Assert.IsTrue(File.Exists(markerFilename1));
Assert.IsTrue(File.Exists(markerFilename2));
File.Delete(markerFilename1);
File.Delete(markerFilename2);
File.Delete(configFilename);
}
public void TestLoadClear()
{
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
ComponentCmd cmd = new ComponentCmd();
setupConfiguration.Children.Add(cmd);
setupConfiguration.Children.Add(cmd);
configFile.Children.Add(setupConfiguration);
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
configFile.SaveAs(configFilename);
int previousConfigurationCount = configFile.ConfigurationCount;
XmlDocument xmlConfigFile = new XmlDocument();
xmlConfigFile.Load(configFilename);
configFile.LoadXml(xmlConfigFile);
Assert.AreEqual(previousConfigurationCount, configFile.ConfigurationCount);
File.Delete(configFilename);
}
public void TestControlLicenseResources()
{
InstallerLinkerArguments args = new InstallerLinkerArguments();
string licenseFile = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".txt");
try
{
Uri uri = new Uri(Assembly.GetExecutingAssembly().CodeBase);
string binPath = Path.GetDirectoryName(HttpUtility.UrlDecode(uri.AbsolutePath));
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
ControlLicense license = new ControlLicense();
license.LicenseFile = licenseFile;
Console.WriteLine("Writing '{0}'", license.LicenseFile);
File.WriteAllText(license.LicenseFile, "Lorem ipsum");
setupConfiguration.Children.Add(license);
args.config = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", args.config);
configFile.SaveAs(args.config);
args.output = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".exe");
Console.WriteLine("Linking '{0}'", args.output);
args.template = dotNetInstallerExeUtils.Executable;
InstallerLib.InstallerLinker.CreateInstaller(args);
// check that the linker generated output
Assert.IsTrue(File.Exists(args.output));
Assert.IsTrue(new FileInfo(args.output).Length > 0);
using (ResourceInfo ri = new ResourceInfo())
{
ri.Load(args.output);
Assert.IsTrue(ri.Resources.ContainsKey(new ResourceId("CUSTOM")));
List<Resource> custom = ri.Resources[new ResourceId("CUSTOM")];
Assert.AreEqual("RES_BANNER", custom[0].Name.Name);
Assert.AreEqual("RES_CONFIGURATION", custom[1].Name.ToString());
Assert.AreEqual("RES_LICENSE", custom[2].Name.ToString());
}
}
finally
{
if (File.Exists(licenseFile))
File.Delete(licenseFile);
if (File.Exists(args.config))
File.Delete(args.config);
if (File.Exists(args.output))
File.Delete(args.output);
}
}
public void TestDisplayConfigSetupConfiguration()
{
// config file
ConfigFile configFile = new ConfigFile();
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// execute
dotNetInstallerExeUtils.RunOptions options = new dotNetInstallerExeUtils.RunOptions(configFilename);
options.args = "/qb /DisplayConfig";
options.log = false;
options.quiet = false;
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(options));
// cleanup
File.Delete(configFilename);
}
public void TestDontWaitForCompleteCommand()
{
Console.WriteLine("TestDontWaitForCompleteCommand");
ConfigFile configFile = new ConfigFile();
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
SetupConfiguration setupConfiguration = new SetupConfiguration();
setupConfiguration.complete_command = TestTimerExeUtils.Executable;
setupConfiguration.wait_for_complete_command = false;
configFile.Children.Add(setupConfiguration);
// save config file
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// execute dotNetInstaller
DateTime ts = DateTime.UtcNow;
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(configFilename));
// test timer lives for 2 seconds before it closes
Assert.IsTrue(DateTime.UtcNow.Subtract(ts).TotalSeconds < 2);
File.Delete(configFilename);
}
public void TestInvalidVersionContinues()
{
Console.WriteLine("TestInvalidVersionContinues");
// a configuration with a mismatched version
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
// save config file
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
XmlDocument configXml = new XmlDocument();
configXml.Load(configFilename);
configXml.SelectSingleNode("/configurations/schema").Attributes["version"].Value = "bogus";
configXml.Save(configFilename);
// execute dotNetInstaller
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(configFilename));
File.Delete(configFilename);
}
public void TestNoUserControl()
{
Console.WriteLine("TestNoUserControl");
// a configuration wthout a user control, value is blank
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
ComponentCmd cmd = new ComponentCmd();
cmd.command = "cmd.exe /C exit /b [doesntexist]5[doesntexist]";
cmd.required_install = true;
setupConfiguration.Children.Add(cmd);
// save config file
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// execute dotNetInstaller
Assert.AreEqual(5, dotNetInstallerExeUtils.Run(configFilename));
File.Delete(configFilename);
}
public void TestCabPathAutoDeleteTrue()
{
Console.WriteLine("TestCabPathAutoDeleteTrue");
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
setupConfiguration.cab_path = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString());
setupConfiguration.cab_path_autodelete = true;
Console.WriteLine("Creating '{0}'", setupConfiguration.cab_path);
Directory.CreateDirectory(setupConfiguration.cab_path);
File.WriteAllText(Path.Combine(setupConfiguration.cab_path, Guid.NewGuid().ToString()), Guid.NewGuid().ToString());
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// execute dotNetInstaller
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(configFilename));
File.Delete(configFilename);
Assert.IsFalse(Directory.Exists(setupConfiguration.cab_path));
}
public void TestComponentLcid()
{
// a configuration with one component
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
// current lcid
string currentLcidFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString());
ComponentCmd cmdCurrentLcid = new ComponentCmd();
cmdCurrentLcid.os_filter_lcid = CultureInfo.CurrentUICulture.LCID.ToString();
Console.WriteLine("Current lcid: {0}", cmdCurrentLcid.os_filter_lcid);
cmdCurrentLcid.command = string.Format("cmd.exe /C dir > \"{0}\"", currentLcidFilename);
cmdCurrentLcid.required_install = true;
setupConfiguration.Children.Add(cmdCurrentLcid);
// empty lcid
string emptyLcidFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString());
ComponentCmd cmdEmptyLcid = new ComponentCmd();
cmdEmptyLcid.command = string.Format("cmd.exe /C dir > \"{0}\"", emptyLcidFilename);
cmdEmptyLcid.required_install = true;
setupConfiguration.Children.Add(cmdEmptyLcid);
// another lcid
string anotherLcidFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString());
ComponentCmd cmdAnotherLcid = new ComponentCmd();
cmdAnotherLcid.os_filter_lcid = (CultureInfo.CurrentCulture.LCID + 1).ToString();
Console.WriteLine("Another lcid: {0}", cmdAnotherLcid.os_filter_lcid);
cmdAnotherLcid.command = string.Format("cmd.exe /C dir > \"{0}\"", anotherLcidFilename);
cmdAnotherLcid.required_install = true;
setupConfiguration.Children.Add(cmdAnotherLcid);
// save config file
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// execute dotNetInstaller
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(configFilename));
Assert.IsTrue(File.Exists(currentLcidFilename));
Assert.IsTrue(File.Exists(emptyLcidFilename));
Assert.IsFalse(File.Exists(anotherLcidFilename));
File.Delete(currentLcidFilename);
File.Delete(emptyLcidFilename);
File.Delete(configFilename);
}
public void TestNoRunOnReboot()
{
Console.WriteLine("TestNoRunOnReboot");
//return reboot code 3010
//simulate passing /noRunOnReboot to dotNetInstaller on command line
//ensure RunOnReboot registry key is not written
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
ComponentCmd cmd_reboot = new ComponentCmd();
cmd_reboot.command = "cmd.exe /C exit /b 3010";
cmd_reboot.returncodes_reboot = "3010";
setupConfiguration.Children.Add(cmd_reboot);
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
dotNetInstallerExeUtils.RunOptions options = new dotNetInstallerExeUtils.RunOptions(configFilename);
options.noRunOnReboot = true;
Assert.AreEqual(3010, dotNetInstallerExeUtils.Run(options));
File.Delete(configFilename);
try
{
using (RegistryKey key = Registry.LocalMachine.OpenSubKey(@"SOFTWARE\Microsoft\Windows\CurrentVersion\Run"))
{
Assert.AreEqual(null, key.GetValue(Path.GetFileName(dotNetInstallerExeUtils.Executable)));
}
}
catch
{
//remove RunOnReboot registry value if AssertionException is thrown
dotNetInstallerExeUtils.DisableRunOnReboot();
throw;
}
}
public void TestDefaultSelectionUninstall()
{
Console.WriteLine("TestDefaultSelectionUninstall");
InstalledCheckFile existsCheck = new InstalledCheckFile();
existsCheck.filename = dotNetInstallerExeUtils.Executable;
existsCheck.comparison = installcheckfile_comparison.exists;
ConfigFile configFile = new ConfigFile();
// setup configuration
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
// dummy component 1
ComponentCmd component1 = new ComponentCmd();
setupConfiguration.Children.Add(component1);
component1.uninstall_command = "cmd.exe /C exit /b 57";
component1.selected_uninstall = true;
component1.supports_uninstall = true;
component1.Children.Add(existsCheck);
// dummy component 2
ComponentCmd component2 = new ComponentCmd();
setupConfiguration.Children.Add(component2);
component2.uninstall_command = "cmd.exe /C exit /b 42";
component2.selected_uninstall = false ;
component2.supports_uninstall = true;
component2.Children.Add(existsCheck);
// second component is selected and runs, not the first one
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
dotNetInstallerExeUtils.RunOptions options = new dotNetInstallerExeUtils.RunOptions(configFilename);
options.uninstall = true;
Assert.AreEqual(57, dotNetInstallerExeUtils.Run(options));
// first component is selected and runs
component2.selected_uninstall = true;
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
Assert.AreEqual(42, dotNetInstallerExeUtils.Run(options));
File.Delete(configFilename);
}
public void TestDownloadConfiguration()
{
Console.WriteLine("TestDownloadConfiguration");
// a configuration with a single component that contains two download components
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
ComponentCmd component1 = new ComponentCmd();
setupConfiguration.Children.Add(component1);
component1.command = "cmd.exe /C exit /b 0";
component1.required_install = true;
DownloadDialog component1downloaddialog = new DownloadDialog(
string.Format("{0} Download Dialog", component1.id));
component1.Children.Add(component1downloaddialog);
Download component1download1 = new Download();
component1download1.componentname = "download 1";
component1download1.sourceurl = Assembly.GetExecutingAssembly().Location;
component1download1.destinationpath = Path.GetTempPath();
component1download1.destinationfilename = Guid.NewGuid().ToString();
component1downloaddialog.Children.Add(component1download1);
Download component1download2 = new Download();
component1download2.componentname = "download 2";
component1download2.sourceurl = Assembly.GetExecutingAssembly().Location;
component1download2.destinationpath = Path.GetTempPath();
component1download2.destinationfilename = Guid.NewGuid().ToString();
component1downloaddialog.Children.Add(component1download2);
// save config file
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// execute dotNetInstaller
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(configFilename));
File.Delete(configFilename);
Assert.IsTrue(File.Exists(Path.Combine(component1download1.destinationpath, component1download1.destinationfilename)));
File.Delete(Path.Combine(component1download1.destinationpath, component1download1.destinationfilename));
Assert.IsTrue(File.Exists(Path.Combine(component1download2.destinationpath, component1download2.destinationfilename)));
File.Delete(Path.Combine(component1download2.destinationpath, component1download2.destinationfilename));
}
public void TestUserControlBrowseBackslashStripped()
{
Console.WriteLine("TestUserControlBrowseBackslashStripped");
ConfigFile configFile = new ConfigFile();
SetupConfiguration setupConfiguration = new SetupConfiguration();
configFile.Children.Add(setupConfiguration);
ControlBrowse browse = new ControlBrowse();
browse.Text = @"42\";
browse.Id = "browse1";
setupConfiguration.Children.Add(browse);
ComponentCmd cmd = new ComponentCmd();
cmd.command = "cmd.exe /C if \"[browse1]\"==\"42\" ( exit /b 0 ) else ( exit /b 1 )";
setupConfiguration.Children.Add(cmd);
// save config file
string configFilename = Path.Combine(Path.GetTempPath(), Guid.NewGuid().ToString() + ".xml");
Console.WriteLine("Writing '{0}'", configFilename);
configFile.SaveAs(configFilename);
// execute dotNetInstaller
Assert.AreEqual(0, dotNetInstallerExeUtils.Run(configFilename));
File.Delete(configFilename);
}