// Token: 0x06000003 RID: 3 RVA: 0x000021B4 File Offset: 0x000003B4
internal static string ExportReinforcementSnippet(AssemblyInstance assembly, FileFormat fileFormat, ICollection <ExportReinfData> exportedElements, Func <Element, bool> filter = null)
{
bool flag = filter == null;
if (flag)
{
filter = ((Element element) => true);
}
string result;
switch (fileFormat)
{
case FileFormat.Unitechnik52:
case FileFormat.Unitechnik60:
result = CamExporter.ExportReinforcementToUnitechnik(assembly, fileFormat, exportedElements, filter);
break;
case FileFormat.PXML13:
result = CamExporter.ExportReinforcementToPXML(assembly, exportedElements, filter);
break;
default:
throw new InvalidOperationException("Unknown file format for CAM export.");
}
return(result);
}
// Token: 0x06000001 RID: 1 RVA: 0x00002050 File Offset: 0x00000250
internal static CmdResult Export(Document document, ref string message, IEnumerable <AssemblyInstance> assemblies, ICamExportIntOptions options, bool variedFormats, out bool bCancelCommand)
{
bCancelCommand = false;
assemblies = ((assemblies != null) ? assemblies.ToList <AssemblyInstance>() : null);
bool flag = assemblies == null || assemblies.none <AssemblyInstance>();
CmdResult result;
if (flag)
{
result = CmdResult.Succeeded;
}
else
{
IEnumerable <ElementId> assemblyInstanceIds = (from element in assemblies
select element.Id).ToList <ElementId>();
bool flag2;
CamIntEvents.OnExporting(document, assemblyInstanceIds, options, out flag2);
CmdResult cmdResult = CmdResult.Succeeded;
bool flag3 = !flag2;
if (flag3)
{
CNCProjectData cncprojectData = CamExporter.GetCNCProjectData(document, options.FileFormat);
switch (options.FileFormat)
{
case FileFormat.Unitechnik52:
case FileFormat.Unitechnik60:
cmdResult = CamExporter.executeUniCAM(ref message, assemblies, options, cncprojectData, out bCancelCommand);
break;
case FileFormat.PXML13:
cmdResult = CamExporter.executePXML(ref message, assemblies, options, cncprojectData, out bCancelCommand);
break;
default:
throw new InvalidOperationException("Unknown file format for CAM export.");
}
bool flag4 = cmdResult == CmdResult.Failed;
if (flag4)
{
CamExporter.showError(options.FileFormat);
}
}
CamIntExportStatus status = CamExporter.DetermineStatus(cmdResult, bCancelCommand, flag2);
CamIntEvents.OnExported(document, assemblyInstanceIds, options, status);
result = cmdResult;
}
return(result);
}
// Token: 0x06000006 RID: 6 RVA: 0x00002514 File Offset: 0x00000714
private static CNCProjectData GetCNCProjectData(Document document, FileFormat format)
{
ItXmlConfig configData = new ItConfig(document).getConfigData();
string formatNodeName = CamExporter.GetFormatNodeName(format);
bool flag = string.IsNullOrEmpty(formatNodeName);
CNCProjectData result;
if (flag)
{
result = null;
}
else
{
ItCfgNode node = configData.CamRootNode[formatNodeName];
CNCProjectData cncprojectData = CNCProjectData.Create(document, node);
result = cncprojectData;
}
return(result);
}
// Token: 0x06000009 RID: 9 RVA: 0x000025D4 File Offset: 0x000007D4
public static CmdResult executeUniCAM(ref string message, IEnumerable <AssemblyInstance> assemblies, ICamExportIntOptions options, CNCProjectData projectData, out bool bExit)
{
assemblies = assemblies.ToList <AssemblyInstance>();
bool flag = assemblies.none <AssemblyInstance>();
CmdResult result;
if (flag)
{
bExit = true;
result = CmdResult.Failed;
}
else
{
Document document = assemblies.First <AssemblyInstance>().Document;
bExit = false;
bool flag2 = projectData == null;
if (flag2)
{
ItFailures.PostFailure(ItFailures.CAMMissingProjectData, ElementId.InvalidElementId);
}
ItTransactionManager.Instance.reset(document);
using (ItTransaction itTransaction = ItTransactionManager.Instance.start(document, CamExporter._lclExportCNCTransaction, null))
{
try
{
int val = 0;
int val2 = 0;
foreach (AssemblyInstance assemblyInstance in assemblies)
{
Parameter parameter = assemblyInstance.getParameter(ItGlobals.PRODNUMBERPARAM, true, true);
bool flag3 = parameter.isNull();
if (!flag3)
{
bool hasValue = parameter.HasValue;
if (hasValue)
{
RevitElement <Part> part = assemblyInstance.getPart(null);
bool flag4 = part == null;
if (!flag4)
{
Element mainElement = part.getMainElement();
int val3;
int.TryParse(parameter.AsString(), out val3);
bool flag5 = mainElement is Wall;
if (flag5)
{
val = Math.Max(val, val3);
}
else
{
bool flag6 = mainElement is Floor;
if (flag6)
{
val2 = Math.Max(val2, val3);
}
}
}
}
}
}
options.TargetDirectory.Create();
DirectoryInfo targetDirectory = options.TargetDirectory;
foreach (AssemblyInstance assemblyInstance2 in assemblies)
{
try
{
Parameter parameter2 = assemblyInstance2.getParameter(ItGlobals.PRODNUMBERPARAM, true, true);
bool flag7 = parameter2 == null;
if (!flag7)
{
RevitElement <Part> part2 = assemblyInstance2.getPart(null);
bool flag8 = part2 == null;
if (!flag8)
{
Element mainElement2 = part2.getMainElement();
ProductType product = part2.productType();
bool subdirectoryPerProductType = options.SubdirectoryPerProductType;
if (subdirectoryPerProductType)
{
options.TargetDirectory = targetDirectory.CreateSubdirectory(product.ToString());
}
ItMachineDataBase cncdocCreator = ItCNCDataFactory.getCNCDocCreator(assemblyInstance2, options);
bool flag9 = cncdocCreator.isNull();
if (!flag9)
{
bool flag10 = mainElement2 is Wall;
if (flag10)
{
CamExporter.FixProdNumber(parameter2, ref val);
}
else
{
bool flag11 = mainElement2 is Floor;
if (flag11)
{
CamExporter.FixProdNumber(parameter2, ref val2);
}
}
int iProdNo = Convert.ToInt32(parameter2.AsString());
string unitechnikFilename = ItMachineDataBase.GetUnitechnikFilename(assemblyInstance2, options, projectData);
bool flag12;
CamIntEvents.OnExportingAssembly(document, assemblyInstance2.Id, options, product, unitechnikFilename, out flag12);
bool flag13 = flag12;
if (!flag13)
{
bool flag14 = CamExporter.CheckUnitechnikFilename(options, unitechnikFilename, out bExit);
bool success = false;
bool flag15 = flag14 && !bExit;
if (flag15)
{
success = cncdocCreator.createMachineDataUnitechnik(assemblyInstance2, iProdNo, projectData, unitechnikFilename);
}
CamIntExportStatus status = CamExporter.DetermineStatus(success, bExit, flag14);
CamIntEvents.OnExportedAssembly(document, assemblyInstance2.Id, options, product, unitechnikFilename, status);
bool flag16 = bExit;
if (flag16)
{
break;
}
}
}
}
}
}
catch (SplitByOpeningNotSupportedException ex)
{
ItFailures.PostFailure(ItFailures.SplitByOpeningNotSupported, ex.ElementId);
}
}
itTransaction.commit();
}
catch (Exception ex2)
{
message = ex2.Message;
ItLogging.print("Exception in ItCmdCreateMaschData");
ItLogging.printException(ex2);
itTransaction.rollback("Exception");
return(CmdResult.Failed);
}
}
result = (bExit ? CmdResult.Cancelled : CmdResult.Succeeded);
}
return(result);
}
