예제 #1
0
    protected void Page_Load(object sender, EventArgs e)
    {
        // 관리자 체크
        EmployeeInfo loginEmployee = new EmployeeInfo();

        loginEmployee = (EmployeeInfo)Session["loginMember"];
        if (loginEmployee == null)
        {
            Response.Redirect("~/login.aspx", true);
        }

        if (loginEmployee.ManagerLevel < 2)
        {
            Response.Redirect("~/login.aspx", true);
        }

        HanaMicron.COMS.BLL.Unit bll = new HanaMicron.COMS.BLL.Unit();
        UnitInfo unitInfo            = new UnitInfo();

        unitInfo.UnitCode = Convert.ToInt32(Request.QueryString["unitCode"]);

        int result = bll.deleteUnit(unitInfo);

        Response.Redirect("unitList.aspx", true);
    }
예제 #2
0
    //private String filepath;
    //private String filename;

    protected void Page_Load(object sender, EventArgs e)
    {
        bllTakeOutData     = new TakeOutData();
        bllTakeOutItemData = new TakeOutItemData();
        bllVisitData       = new VisitData();

        String takeOutDataCode;         // 반출 번호 mã ra ngoài

        // 로그인 체크 check login
        EmployeeInfo loginEmployee = new EmployeeInfo();

        loginEmployee = (EmployeeInfo)Session["loginMember"];
        if (loginEmployee == null)
        {
            Response.Redirect("~/login.aspx", true);
        }

        if (Page.IsPostBack)
        {
            //Createfolder();

            // 2021-03-26 Nguyen Van An: file upload
            #region  일 업로드

            String userFileMimeType1 = String.Empty;
            String userFileMimeType2 = String.Empty;
            String userFileMimeType3 = String.Empty;

            String userFileName1 = String.Empty;
            String userFileName2 = String.Empty;
            String userFileName3 = String.Empty;

            String userFileByte1 = String.Empty;
            String userFileByte2 = String.Empty;
            String userFileByte3 = String.Empty;

            String userFileDBName1 = String.Empty;
            String userFileDBName2 = String.Empty;
            String userFileDBName3 = String.Empty;

            String separator = "|";
            //  String fileUploadDir = ConfigurationManager.AppSettings["fileUploadPath"];
            string[] arrFileName;
            string   ext;

            if (userFile1.HasFile && checkfile(userFile1.FileName))
            {
                //arrFileName = userFile1.FileName.Split('.');
                //ext = arrFileName[arrFileName.Length - 1].ToLower();
                //userFileName1 = HanaMicron.COMS.Utility.StringUtil.ReplaceSpecial(userFile1.FileName.Replace("." + ext, "")) + "." + ext;
                //String savePath1 = fileUploadDir + "\\" + (userFileName1);
                //userFileMimeType1 = userFile1.PostedFile.ContentType;
                //userFileByte1 = userFile1.PostedFile.ContentLength.ToString();
                //userFile1.SaveAs(savePath1);
                // userFileDBName1 = userFileName1 ;

                String filename1 = DateTime.Now.ToString("yyyyMMdd_hhmmss_") + userFile1.FileName;
                String filepath  = MapPath("~/image/" + filename1);
                userFile1.SaveAs(filepath);
                userFileDBName1 = filename1;
            }

            if (userFile2.HasFile && checkfile(userFile2.FileName))
            {
                //arrFileName = userFile2.FileName.Split('.');
                //ext = arrFileName[arrFileName.Length - 1].ToLower();
                //userFileName2 = HanaMicron.COMS.Utility.StringUtil.ReplaceSpecial(userFile2.FileName.Replace("." + ext, "")) + "." + ext;
                //userFileMimeType2 = userFile2.PostedFile.ContentType;
                //userFileByte2 = userFile2.PostedFile.ContentLength.ToString();
                //String savePath2 = fileUploadDir + "\\" + userFileName2;
                //userFile2.SaveAs(savePath2);
                //userFileDBName2 = userFileName2 + separator + userFileMimeType2 + separator + userFileByte2;

                String filename2 = DateTime.Now.ToString("yyyyMMdd_hhmmss_") + userFile2.FileName;
                String filepath  = MapPath("~/image/" + filename2);
                userFile2.SaveAs(filepath);
                userFileDBName2 = filename2;
            }

            if (userFile3.HasFile && checkfile(userFile3.FileName))
            {
                //arrFileName = userFile3.FileName.Split('.');
                //ext = arrFileName[arrFileName.Length - 1].ToLower();
                //userFileName3 = HanaMicron.COMS.Utility.StringUtil.ReplaceSpecial(userFile3.FileName.Replace("." + ext, "")) + "." + ext;
                //userFileMimeType3 = userFile3.PostedFile.ContentType;
                //userFileByte3 = userFile3.PostedFile.ContentLength.ToString();
                //String savePath3 = fileUploadDir + "\\" + userFileName3;
                //userFile3.SaveAs(savePath3);
                //userFileDBName3 = userFileName3 ;

                String filename3 = DateTime.Now.ToString("yyyyMMdd_hhmmss_") + userFile3.FileName;
                String filepath  = MapPath("~/image/" + filename3);
                userFile3.SaveAs(filepath);
                userFileDBName3 = filename3;
            }
            #endregion

            // 반출 정보 Data 만들기 tạo data thông tin ra ngoài
            TakeOutDataInfo takeOutDataInfo = new TakeOutDataInfo();
            takeOutDataInfo.CompanyCode     = Convert.ToInt32(Request["companyCode"]);
            takeOutDataInfo.RecieveName     = Request["recieveName"];
            takeOutDataInfo.RequestUserCode = loginEmployee.Upnid;
            takeOutDataInfo.RequireIN       = Convert.ToInt32(Request["requireIN"]);       //반입 필 여부 có/ không cần vào
            takeOutDataInfo.ObjectContents  = Request["objectContents"];

            //반입필 일 경우만 반입예정일 입력
            if (takeOutDataInfo.RequireIN == 1)
            {
                takeOutDataInfo.ScheduleInDate = Request["scheduleInDate"];
            }

            takeOutDataInfo.ScheduleOutDate   = Request["scheduleOutDate"];
            takeOutDataInfo.CarCode           = Convert.ToInt32(Request["carCode"]);
            takeOutDataInfo.TakeOutStateCode  = 0;
            takeOutDataInfo.TakeOutObjectCode = Convert.ToInt32(takeOutObjectCode.SelectedValue);
            //takeOutDataInfo.ApprovalUserCode = Request["approvalUserCode"];
            takeOutDataInfo.TakeOutPathEndCode   = Convert.ToInt32(takeOutPathEnd.SelectedValue);
            takeOutDataInfo.TakeOutPathStartCode = Convert.ToInt32(takeOutPathStart.SelectedValue);
            takeOutDataInfo.Note = Request["note"];

            //반입불가 일때만 반입불가사유 입력 (수정시에도 해당됨)
            if (takeOutDataInfo.RequireIN == 2)
            {
                takeOutDataInfo.DisApprovalCategoryCode = Convert.ToInt32(disApprovalCategoryCode.SelectedValue);
            }

            takeOutDataInfo.DisApprovalCategoryDetail = Request["disApprovalCategoryDetail"];
            takeOutDataInfo.ElecApproveCode           = Request["elecApproveCode"];

            // 신규
            if (Request.QueryString["mode"].Equals("write"))
            {
                // 반출 번호 만들기 (물품 저장 될것을 위해서)
                takeOutDataCode = bllTakeOutData.selectNextTakeOutDataCode();
                takeOutDataInfo.TakeOutDataCode = takeOutDataCode;
                takeOutDataInfo.ApprovalState   = 0;
                takeOutDataInfo.UserFile1       = userFileDBName1;
                takeOutDataInfo.UserFile2       = userFileDBName2;
                takeOutDataInfo.UserFile3       = userFileDBName3;

                int result = bllTakeOutData.insertTakeOutData(takeOutDataInfo);
            }

            // 수정
            else
            {
                takeOutDataCode = Request["takeOutDataCode"];

                TakeOutDataInfo oldData = bllTakeOutData.selectTakeOutData(Request.QueryString["takeOutDataCode"]);
                takeOutDataInfo.TakeOutDataCode = takeOutDataCode;
                takeOutDataInfo.ApprovalState   = 0;
                //takeOutDataInfo.TakeOutItemDataList[0].TakeOutTime = oldData.TakeOutItemDataList[0].TakeOutTime;
                //takeOutDataInfo.TakeOutItemDataList[0].TakeINTime = oldData.TakeOutItemDataList[0].TakeINTime;
                //takeOutDataInfo.ApproveTime = oldData.ApproveTime;
                takeOutDataInfo.ElecApproveCode = oldData.ElecApproveCode;

                if (!String.IsNullOrEmpty(userFileName1))
                {
                    takeOutDataInfo.UserFile1 = userFileDBName1;
                }
                if (!String.IsNullOrEmpty(userFileName2))
                {
                    takeOutDataInfo.UserFile2 = userFileDBName2;
                }
                if (!String.IsNullOrEmpty(userFileName3))
                {
                    takeOutDataInfo.UserFile3 = userFileDBName3;
                }

                int result = bllTakeOutData.updateTakeOutData(takeOutDataInfo);

                // 이전 물품 삭제
                List <TakeOutItemDataInfo> takeOutItemList = bllTakeOutItemData.selectTakeOutItemDataList(oldData.TakeOutDataCode);
                for (int i = 0; i < takeOutItemList.Count; i++)
                {
                    TakeOutItemDataInfo obj = (TakeOutItemDataInfo)takeOutItemList[i];
                    int resultDelete        = bllTakeOutItemData.deleteTakeOutItemData(obj);
                }
            }

            // 반출 물품 정보 넣기
            String   subTakeOutItemCategoryCodes   = Request["subTakeOutItemCategoryCodes"];
            String[] arrSubTakeOutItemCategoryCode = subTakeOutItemCategoryCodes.Split(',');

            String   takeOutItemNames    = Request["takeOutItemNames"];
            String[] arrTakeOutItemNames = takeOutItemNames.Split(',');

            String   takeOutItemNameTypes    = Request["takeOutItemNameTypes"];
            String[] arrTakeOutItemNameTypes = takeOutItemNameTypes.Split(',');

            String   takeOutItemAccounts    = Request["takeOutItemAccounts"];
            String[] arrTakeOutItemAccounts = takeOutItemAccounts.Split(',');

            String   takeOutUnits    = Request["takeOutUnits"];
            String[] arrTakeOutUnits = takeOutUnits.Split(',');

            for (int i = 0; i < arrSubTakeOutItemCategoryCode.Length; i++)
            {
                if (!String.IsNullOrEmpty(arrSubTakeOutItemCategoryCode[i]))
                {
                    TakeOutItemDataInfo takeOutItemDataInfo = new TakeOutItemDataInfo();
                    takeOutItemDataInfo.TakeOutDataCode = takeOutDataCode;
                    takeOutItemDataInfo.SubCategoryCode = Convert.ToInt32(arrSubTakeOutItemCategoryCode[i]);
                    takeOutItemDataInfo.TakeOutItemName = arrTakeOutItemNames[i];
                    takeOutItemDataInfo.TakeOutItemType = arrTakeOutItemNameTypes[i];
                    takeOutItemDataInfo.Account         = Convert.ToInt32(arrTakeOutItemAccounts[i]);
                    takeOutItemDataInfo.UnitCode        = Convert.ToInt32(arrTakeOutUnits[i]);

                    int itemResult = bllTakeOutItemData.insertTakeOutItemData(takeOutItemDataInfo);
                }
            }

            Response.Redirect("viewTakeOut.aspx?takeOutDataCode=" + takeOutDataCode, true);
        }
        else
        {
            // 신규
            if (Request.QueryString["mode"].Equals("write"))
            {
                // 신규 결재 코드 가져오기
                approveDocCode = bllVisitData.GetNewApproveCode();
            }
            // 수정
            else
            {
                // 반출 번호
                TakeOutDataInfo oldData = bllTakeOutData.selectTakeOutData(Request.QueryString["takeOutDataCode"]);
                lblTakeOutDataCode.Text         = Request["takeOutDataCode"];
                scheduleDateTitle               = oldData.ScheduleInDate;
                scheduleDateOut                 = oldData.ScheduleOutDate;
                takeOutObjectCode.SelectedValue = oldData.TakeOutObjectCode.ToString();
                takeOutPathStart.SelectedValue  = oldData.TakeOutPathStartCode.ToString();
                takeOutPathEnd.SelectedValue    = oldData.TakeOutPathEndCode.ToString();
                objectContents = oldData.ObjectContents;
                companyCode    = oldData.CompanyCode;
                companyName    = oldData.CompanyName;
                recieveName    = oldData.RecieveName;
                carCode        = oldData.CarCode;
                carNumber      = oldData.CarNumber;

                // 반입불가가 아닌경우(반입가능) 불가사유 없으므로 수정시 select 1로 하고 실제 저장시에는 저장 안되게 되어 있음.
                if (oldData.DisApprovalCategoryCode == 0)
                {
                    disApprovalCategoryCode.SelectedValue = "20";
                }
                else
                {
                    disApprovalCategoryCode.SelectedValue = oldData.DisApprovalCategoryCode.ToString();
                }

                disApprovalCategoryDetail = oldData.DisApprovalCategoryDetail;

                if (oldData.RequireIN == 1)
                {
                    ckRequire1 = "checked";
                }
                else
                {
                    ckRequire2 = "checked";
                }

                // 이전 물품 정보 보여주기
                List <TakeOutItemDataInfo> takeOutItemList = bllTakeOutItemData.selectTakeOutItemDataList(Request.QueryString["takeOutDataCode"]);
                for (int i = 0; i < takeOutItemList.Count; i++)
                {
                    TakeOutItemDataInfo obj = (TakeOutItemDataInfo)takeOutItemList[i];

                    arrTakeOutItemList += "parentCategory[" + i + "]='" + obj.ParentCategoryCode + "';\n";
                    arrTakeOutItemList += "subCategory[" + i + "]='" + obj.SubCategoryCode + "';\n";
                    arrTakeOutItemList += "itemName[" + i + "]='" + obj.TakeOutItemName + "';\n";
                    arrTakeOutItemList += "itemType[" + i + "]='" + obj.TakeOutItemType + "';\n";
                    arrTakeOutItemList += "account[" + i + "]='" + obj.Account.ToString() + "';\n";
                    arrTakeOutItemList += "unit[" + i + "]='" + obj.UnitCode + "';\n";
                }

                displayCellCount = takeOutItemList.Count.ToString();

                // 결재 코드
                approveDocCode = oldData.ElecApproveCode;

                //첨부 파일
                if (!String.IsNullOrEmpty(oldData.UserFile1))
                {
                    lblUserFile1.Text  = "<a href='" + ConfigurationManager.AppSettings["fileOpenPath"] + "/" + bllTakeOutData.GetFileName(oldData.UserFile1) + "' target='_blank'>" + bllTakeOutData.GetFileName(oldData.UserFile1) + "</a>";
                    lblUserFile1.Text += "<a href='#;' onclick=\"confirmMove('Có chắc chắn xóa không? (정말로 삭제하시겠습니까?)','userFileDeleteTakeOut.aspx?takeOutDataCode=" + oldData.TakeOutDataCode + "&fileNumber=1&fileName=" + HttpUtility.UrlEncode(bllTakeOutData.GetFileName(oldData.UserFile1)) + "',document.dummy)\"><img src='../../images/icon/fileDelete.gif' align='absmiddle'></a>";
                }

                if (!String.IsNullOrEmpty(oldData.UserFile2))
                {
                    String[] arrUserFile2 = oldData.UserFile2.Split('|');
                    lblUserFile2.Text  = "<a href='" + ConfigurationManager.AppSettings["fileOpenPath"] + "/" + bllTakeOutData.GetFileName(oldData.UserFile2) + "' target='_blank'>" + bllTakeOutData.GetFileName(oldData.UserFile2) + "</a>";
                    lblUserFile2.Text += "<a href='#;' onclick=\"confirmMove('Có chắc chắn xóa không? (정말로 삭제하시겠습니까?)','userFileDeleteTakeOut.aspx?takeOutDataCode=" + oldData.TakeOutDataCode + "&fileNumber=2&fileName=" + HttpUtility.UrlEncode(bllTakeOutData.GetFileName(oldData.UserFile2)) + "',document.dummy)\"><img src='../../images/icon/fileDelete.gif' align='absmiddle'></a>";
                }

                if (!String.IsNullOrEmpty(oldData.UserFile3))
                {
                    String[] arrUserFile3 = oldData.UserFile3.Split('|');
                    lblUserFile3.Text  = "<a href='" + ConfigurationManager.AppSettings["fileOpenPath"] + "/" + bllTakeOutData.GetFileName(oldData.UserFile3) + "' target='_blank'>" + bllTakeOutData.GetFileName(oldData.UserFile3) + "</a>";
                    lblUserFile3.Text += "<a href='#;' onclick=\"confirmMove('Có chắc chắn xóa không? (정말로 삭제하시겠습니까?)','userFileDeleteTakeOut.aspx?takeOutDataCode=" + oldData.TakeOutDataCode + "&fileNumber=3&fileName=" + HttpUtility.UrlEncode(bllTakeOutData.GetFileName(oldData.UserFile3)) + "',document.dummy)\"><img src='../../images/icon/fileDelete.gif' align='absmiddle'></a>";
                }

                note = oldData.Note;
            }

            // 임직원 정보 보이기
            lblDepartment.Text  = loginEmployee.Dep_name;
            lblUpnid.Text       = loginEmployee.Upnid;
            lblOfficeName.Text  = loginEmployee.OfficeName;
            lblDisplayName.Text = loginEmployee.DisplayName;
            lblTitle.Text       = loginEmployee.Title_name;
            lblPhone.Text       = loginEmployee.MobilePhoneNumber;


            // 대분류 가져오기
            TakeOutItemCategory            bllTakeOutItemCategory = new TakeOutItemCategory();
            List <TakeOutItemCategoryInfo> categorylist           = bllTakeOutItemCategory.selectTakeOutItemCategoryList(1, 0);
            for (int i = 0; i < categorylist.Count; i++)
            {
                TakeOutItemCategoryInfo itemCategory = (TakeOutItemCategoryInfo)categorylist[i];
                itemCategoryNameList += "arrItemCategoryNameList[" + i + "] = '" + itemCategory.CodeName + "';\n";
                itemCategoryCodeList += "arrItemCategoryCodeList[" + i + "] = '" + itemCategory.TakeOutItemCategoryCode + "';\n";
            }



            // 단위 가져오기
            HanaMicron.COMS.BLL.Unit bllUnit = new HanaMicron.COMS.BLL.Unit();
            String          unitSearchKey    = "A";
            List <UnitInfo> unitList         = bllUnit.selectUnitList(unitSearchKey);
            for (int i = 0; i < unitList.Count; i++)
            {
                UnitInfo unitInfo = (UnitInfo)unitList[i];

                unitNameList += "arrUnitNameList[" + i + "] = '" + unitInfo.CodeName + "';\n";
                unitCodeList += "arrUnitCodeList[" + i + "] = '" + unitInfo.UnitCode + "';\n";
            }
        }
    }