private void btnUnlocked_Click(object sender, RoutedEventArgs e)
        {
            TaskDialogOptions config = new TaskDialogOptions();

            config.Owner           = this;
            config.Title           = "Are you sure about your selection?";
            config.MainInstruction = "You have chosen to set your ";
            config.Content         = "This will unlock your bootloader." +
                                     "";
            config.ExpandedInfo = "The banner is: **UNLOCKED**";
            //config.VerificationText = "Don't show me this message again";
            config.CustomButtons = new string[] { "&Continue", "&Cancel" };
            config.MainIcon      = VistaTaskDialogIcon.Information;
            //config.FooterText = "Optional footer text with an icon can be included.";
            //config.FooterIcon = VistaTaskDialogIcon.Warning;

            TaskDialogResult res = TaskDialog.Show(config);

            if (res.CustomButtonResult == 0)
            {
                CidDialog ciddiag = CidDialog.Instance;
                ciddiag.Add(ADB.Instance().ShellCmd("su -c 'echo -ne \"HTCU\" | dd of=/dev/block/mmcblk0p2 bs=1 seek=33796'"));
                ciddiag.Show();
                ADB.Instance().Reboot(AndroidCtrl.IDBoot.BOOTLOADER);
            }
            else
            {
                //Nothing
            }
        }
예제 #2
0
        private void btnHtcDev_Click(object sender, RoutedEventArgs e)
        {
            if (deviceselector.Items.Count == 0)
            {
                MessageBox.Show("A device has not been detected as of yet. Wait 10 seconds or diagnose the issue.", "No Device", MessageBoxButton.OK, MessageBoxImage.Error);
            }

            IDDeviceState state = General.CheckDeviceState(ADB.Instance().DeviceID);

            if (state == IDDeviceState.DEVICE)
            {
                ADB.Instance().Reboot(IDBoot.BOOTLOADER);
                CidDialog ciddiag = CidDialog.Instance;
                ciddiag.Add(Fastboot.Instance().OEM.GetIdentifierToken());
                ciddiag.Show();
                MessageBox.Show("You must continue from the HTC Dev website.", "Redirecting to HTCDev.com", MessageBoxButton.OK, MessageBoxImage.Information);
                System.Diagnostics.Process.Start("http://www.htcdev.com/bootloader/");
            }
            else if (state == IDDeviceState.FASTBOOT)
            {
                CidDialog ciddiag = CidDialog.Instance;
                ciddiag.Add(Fastboot.Instance().OEM.GetIdentifierToken());
                ciddiag.Show();
                MessageBox.Show("You must continue from the HTC Dev website.", "Redirecting to HTCDev.com", MessageBoxButton.OK, MessageBoxImage.Information);
                System.Diagnostics.Process.Start("http://www.htcdev.com/bootloader/");
            }
        }
예제 #3
0
        private void btnPushSU_Click(object sender, RoutedEventArgs e)
        {
            CidDialog ciddiag = CidDialog.Instance;

            ciddiag.Add(ADB.Instance().Push("./Data/SuperSU.zip", "/sdcard/"));
            ciddiag.Show();
        }
예제 #4
0
        private void btnAdbShell_Click(object sender, RoutedEventArgs e)
        {
            CidDialog ciddiag = CidDialog.Instance;

            ciddiag.Show();
            ciddiag.Add(ADB.Instance().ShellCmd(tbAdbShell.Text));
        }
예제 #5
0
 private void btnFbtGo_Click(object sender, RoutedEventArgs e)
 {
     if (cBFbtCmds.Text == "Reboot")
     {
         Fastboot.Instance().Reboot(IDBoot.REBOOT);
     }
     else if (cBFbtCmds.Text == "Reboot Bootloader")
     {
         Fastboot.Instance().Reboot(IDBoot.BOOTLOADER);
     }
     else if (cBFbtCmds.Text == "RebootRUU")
     {
         Fastboot.Instance().OEM.RebootRUU();
     }
     else if (cBFbtCmds.Text == "Read CID")
     {
         CidDialog ciddiag = CidDialog.Instance;
         ciddiag.Add(Fastboot.Instance().OEM.ReadCid());
         ciddiag.Show();
     }
     else if (cBFbtCmds.Text == "Show Identifier Token")
     {
         CidDialog ciddiag = CidDialog.Instance;
         ciddiag.Add(Fastboot.Instance().OEM.GetIdentifierToken());
         ciddiag.Show();
     }
     else if (cBFbtCmds.Text == "Relock Bootloader")
     {
         if (MessageBox.Show("Are you sure you want to relock the bootloader?", "Are you sure you want to relock?", MessageBoxButton.YesNo, MessageBoxImage.Warning) == MessageBoxResult.Yes)
         {
             CidDialog ciddiag = CidDialog.Instance;
             ciddiag.Add(Fastboot.Instance().OEM.Lock());
             ciddiag.Show();
         }
         else
         {
             //No
         }
     }
     else if (cBFbtCmds.Text == "S-On Bootloader")
     {
         if (MessageBox.Show("Are you sure you want to S-On?", "Are you sure you want to S-On?", MessageBoxButton.YesNo, MessageBoxImage.Warning) == MessageBoxResult.Yes)
         {
             CidDialog ciddiag = CidDialog.Instance;
             ciddiag.Add(Fastboot.Instance().OEM.WriteSecureFlag("3"));
             ciddiag.Show();
         }
         else
         {
             //No
         }
     }
     else
     {
         MessageBox.Show("You have not selected a command.", "Error", MessageBoxButton.OK, MessageBoxImage.Error);
     }
 }
예제 #6
0
        private void btnExec_Click(object sender, RoutedEventArgs e)
        {
            if (cBFbtOem.Text == "")
            {
                MessageBox.Show("You must select a command to execute!");
            }
            else if (cBFbtOem.Text == "RebootRUU")
            {
                Fastboot.Instance().OEM.RebootRUU();
            }
            else if (cBFbtOem.Text == "Lock Bootloader")
            {
                TaskDialogOptions config = new TaskDialogOptions();

                config.Owner           = this;
                config.Title           = "Are you sure?";
                config.MainInstruction = "You are about to RELOCK the bootloader.";
                config.Content         = "You will need to go through an unlocking procedure again"
                                         + "to unlock the bootloader. (Either through HTCDev or the ADB Bootloader Commands)";
                config.CommandButtons = new string[] {
                    "No", "No", "Yes"
                };
                config.MainIcon = VistaTaskDialogIcon.Information;

                TaskDialogResult res = TaskDialog.Show(config);
                if (res.CommandButtonResult == 0)
                {
                }
                else if (res.CommandButtonResult == 1)
                {
                }
                else if (res.CommandButtonResult == 2)
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().OEM.Lock());
                }
            }
        }
        private void btnPushFw_Click(object sender, RoutedEventArgs e)
        {
            if (tBFwPath.Text == "")
            {
                if (MessageBox.Show("You have not selected firewater to complete the command. \nWould you like to locate it now?", "Missing File", MessageBoxButton.YesNo, MessageBoxImage.Warning) == MessageBoxResult.Yes)
                {
                    // Create OpenFileDialog
                    Microsoft.Win32.OpenFileDialog dlg = new Microsoft.Win32.OpenFileDialog();

                    // Set filter for file extension and default file extension
                    dlg.DefaultExt = "firewater";
                    dlg.Filter     = "All Files (*.*)|*.*";
                    dlg.Title      = "Locate Firewater";

                    // Display OpenFileDialog by calling ShowDialog method
                    Nullable <bool> result = dlg.ShowDialog();

                    // Get the selected file name and display in a TextBox
                    if (result == true)
                    {
                        // Open document
                        string filename = dlg.FileName;
                        tBFwPath.Text = filename;
                    }
                }
                else
                {
                    MessageBox.Show("You cannot continue unless you select a file.", "Missing File", MessageBoxButton.OK, MessageBoxImage.Information);
                }
            }
            else
            {
                CidDialog ciddiag = CidDialog.Instance;
                ciddiag.Add(ADB.Instance().Push(tBFwPath.Text, "/data/local/tmp/firewater"));
                ciddiag.Show();
            }
        }
예제 #8
0
        private void btnBoot_Click(object sender, RoutedEventArgs e)
        {
            if (tBFbtPath.Text == "")
            {
                if (MessageBox.Show("You have not selected a file. Would you like to select one now?", "Missing File", MessageBoxButton.YesNo, MessageBoxImage.Warning) == MessageBoxResult.Yes)
                {
                    // Create OpenFileDialog
                    Microsoft.Win32.OpenFileDialog dlg = new Microsoft.Win32.OpenFileDialog();

                    // Set filter for file extension and default file extension
                    dlg.DefaultExt = "";
                    dlg.Filter     = "All Files (*.*)|*.*";
                    dlg.Title      = "Locate Files";

                    // Display OpenFileDialog by calling ShowDialog method
                    Nullable <bool> result = dlg.ShowDialog();

                    // Get the selected file name and display in a TextBox
                    if (result == true)
                    {
                        // Open document
                        string filename = dlg.FileName;
                        tBFbtPath.Text = filename;
                    }
                }
                else
                {
                    //nothing
                }
            }
            else
            {
                CidDialog ciddiag = CidDialog.Instance;
                ciddiag.Show();
                ciddiag.Add(Fastboot.Instance().Boot(tBFbtPath.Text, "", 10));
            }
        }
 ///<summary>
 /// Clean exit
 ///</summary>
 private void WindowClosing(object sender, System.ComponentModel.CancelEventArgs e)
 {
     _instance = null;
 }
        private void btnMidGo_Click(object sender, RoutedEventArgs e)
        {
            if (lbMidList.SelectedIndex == 0)
            {
                TaskDialogOptions config = new TaskDialogOptions();

                config.Owner           = this;
                config.Title           = "Are you sure about your selection?";
                config.MainInstruction = "You have chosen to change the Model ID of your device";
                config.Content         = "The Model ID you have chosen is the one for the " +
                                         "AT&T, Developer and Unlocked Editions of the phone. Click 'Show Details' to show the MID number.";
                config.ExpandedInfo = "The Model ID is: 0P6B12000";
                //config.VerificationText = "Don't show me this message again";
                config.CustomButtons = new string[] { "&Continue", "&Cancel" };
                config.MainIcon      = VistaTaskDialogIcon.Information;
                //config.FooterText = "Optional footer text with an icon can be included.";
                //config.FooterIcon = VistaTaskDialogIcon.Warning;

                TaskDialogResult res = TaskDialog.Show(config);
                if (res.CustomButtonResult == 0)
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(ADB.Instance().ShellCmd("su '-ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x32\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384'"));
                }
                else
                {
                    //Nothing
                }
            }
            else if (lbMidList.SelectedIndex == 1)
            {
                TaskDialogOptions config = new TaskDialogOptions();

                config.Owner           = this;
                config.Title           = "Are you sure about your selection?";
                config.MainInstruction = "You have chosen to change the Model ID of your device";
                config.Content         = "The Model ID you have chosen is the one for the " +
                                         "Google Play Edition of the phone. Click 'Show Details' to show the MID number.";
                config.ExpandedInfo = "The Model ID is: 0P6B17000";
                //config.VerificationText = "Don't show me this message again";
                config.CustomButtons = new string[] { "&Continue", "&Cancel" };
                config.MainIcon      = VistaTaskDialogIcon.Information;
                //config.FooterText = "Optional footer text with an icon can be included.";
                //config.FooterIcon = VistaTaskDialogIcon.Warning;

                TaskDialogResult res = TaskDialog.Show(config);
                if (res.CustomButtonResult == 0)
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Add(ADB.Instance().ShellCmd("su -c 'echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x37\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384'"));
                    ciddiag.Show();
                }
                else
                {
                    //Nothing
                }
            }
            else if (lbMidList.SelectedIndex == 2)
            {
                TaskDialogOptions config = new TaskDialogOptions();

                config.Owner           = this;
                config.Title           = "Are you sure about your selection?";
                config.MainInstruction = "You have chosen to change the Model ID of your device";
                config.Content         = "The Model ID you have chosen is the one for the " +
                                         "T-Mobile Edition of the phone. Click 'Show Details' to show the MID number.";
                config.ExpandedInfo = "The Model ID is: 0P6B13000";
                //config.VerificationText = "Don't show me this message again";
                config.CustomButtons = new string[] { "&Continue", "&Cancel" };
                config.MainIcon      = VistaTaskDialogIcon.Information;
                //config.FooterText = "Optional footer text with an icon can be included.";
                //config.FooterIcon = VistaTaskDialogIcon.Warning;

                TaskDialogResult res = TaskDialog.Show(config);
                if (res.CustomButtonResult == 0)
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Add(ADB.Instance().ShellCmd("su -c 'echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x33\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384'"));
                    ciddiag.Show();
                }
                else
                {
                    //Nothing
                }
            }
            else if (lbMidList.SelectedIndex == 3)
            {
                TaskDialogOptions config = new TaskDialogOptions();

                config.Owner           = this;
                config.Title           = "Are you sure about your selection?";
                config.MainInstruction = "You have chosen to change the Model ID of your device";
                config.Content         = "The Model ID you have chosen is the one for the " +
                                         "HTC Europe Edition of the phone. Click 'Show Details' to show the MID number.";
                config.ExpandedInfo = "The Model ID is: 0P6B10000";
                //config.VerificationText = "Don't show me this message again";
                config.CustomButtons = new string[] { "&Continue", "&Cancel" };
                config.MainIcon      = VistaTaskDialogIcon.Information;
                //config.FooterText = "Optional footer text with an icon can be included.";
                //config.FooterIcon = VistaTaskDialogIcon.Warning;

                TaskDialogResult res = TaskDialog.Show(config);
                if (res.CustomButtonResult == 0)
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Add(ADB.Instance().ShellCmd("su -c 'echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x30\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384"));
                    ciddiag.Show();
                }
                else
                {
                    //Nothing
                }
            }
            else if (lbMidList.SelectedIndex == 4)
            {
                TaskDialogOptions config = new TaskDialogOptions();

                config.Owner           = this;
                config.Title           = "Are you sure about your selection?";
                config.MainInstruction = "You have chosen to change the Model ID of your device";
                config.Content         = "The Model ID you have chosen is the one for the " +
                                         "Rogers Edition of the phone. Click 'Show Details' to show the MID number.";
                config.ExpandedInfo = "The Model ID is: 0P6B16000";
                //config.VerificationText = "Don't show me this message again";
                config.CustomButtons = new string[] { "&Continue", "&Cancel" };
                config.MainIcon      = VistaTaskDialogIcon.Information;
                //config.FooterText = "Optional footer text with an icon can be included.";
                //config.FooterIcon = VistaTaskDialogIcon.Warning;

                TaskDialogResult res = TaskDialog.Show(config);
                if (res.CustomButtonResult == 0)
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Add(ADB.Instance().ShellCmd("su -c 'echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x36\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384"));
                    ciddiag.Show();
                }
                else
                {
                    //Nothing
                }
            }
            else if (lbMidList.SelectedIndex == 5)
            {
                TaskDialogOptions config = new TaskDialogOptions();

                config.Owner           = this;
                config.Title           = "Are you sure about your selection?";
                config.MainInstruction = "You have chosen to change the Model ID of your device";
                config.Content         = "The Model ID you have chosen is the one for the " +
                                         "Wind (Canada) Edition of the phone. Click 'Show Details' to show the MID number.";
                config.ExpandedInfo = "The Model ID is: 0P6B13000";
                //config.VerificationText = "Don't show me this message again";
                config.CustomButtons = new string[] { "&Continue", "&Cancel" };
                config.MainIcon      = VistaTaskDialogIcon.Information;
                //config.FooterText = "Optional footer text with an icon can be included.";
                //config.FooterIcon = VistaTaskDialogIcon.Warning;

                TaskDialogResult res = TaskDialog.Show(config);
                if (res.CustomButtonResult == 0)
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Add(ADB.Instance().ShellCmd("su -c 'echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x33\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384"));
                    ciddiag.Show();
                }
                else
                {
                    //Nothing
                }
            }
            else if (lbMidList.SelectedIndex == 6)
            {
                TaskDialogOptions config = new TaskDialogOptions();

                config.Owner           = this;
                config.Title           = "Are you sure about your selection?";
                config.MainInstruction = "You have chosen to change the Model ID of your device";
                config.Content         = "The Model ID you have chosen is the one for the " +
                                         "0P6B11000 Edition of the phone. Click 'Show Details' to show the MID number.";
                config.ExpandedInfo = "The Model ID is: 0P6B11000";
                //config.VerificationText = "Don't show me this message again";
                config.CustomButtons = new string[] { "&Continue", "&Cancel" };
                config.MainIcon      = VistaTaskDialogIcon.Information;
                //config.FooterText = "Optional footer text with an icon can be included.";
                //config.FooterIcon = VistaTaskDialogIcon.Warning;

                TaskDialogResult res = TaskDialog.Show(config);
                if (res.CustomButtonResult == 0)
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Add(ADB.Instance().ShellCmd("su -c 'echo -ne '\x30\x00\x50\x00\x36\x00\x42\x00\x31\x00\x31\x00\x30\x00\x30\x00\x30' | dd of=/dev/block/mmcblk0p5 bs=1 seek=16384"));
                    ciddiag.Show();
                }
                else
                {
                    //Nothing
                }
            }
            else
            {
                MessageBox.Show("You have not selected anything. You cannot continue.");
            }
        }
예제 #11
0
        private void button1_Click(object sender, RoutedEventArgs e)
        {
            CidDialog ciddiag = CidDialog.Instance;

            ciddiag.Show();
        }
예제 #12
0
 private void btnErase_Click(object sender, RoutedEventArgs e)
 {
     if (deviceselector.Text == "")
     {
         MessageBox.Show("A device has not been detected! Please wait 10 seconds or diagnose the issue!", "No device detected", MessageBoxButton.OK, MessageBoxImage.Error);
     }
     else
     {
         if (cBFbtPart.Text == "")
         {
             MessageBox.Show("You cannot continue unless you select a partition.", "Partition not Selected", MessageBoxButton.OK, MessageBoxImage.Information);
         }
         else
         {
             if (cBFbtPart.Text == "Boot")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.BOOT));
             }
             else if (cBFbtPart.Text == "Cache")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.CACHE));
             }
             else if (cBFbtPart.Text == "Data")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.DATA));
             }
             else if (cBFbtPart.Text == "Hboot")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.HBOOT));
             }
             else if (cBFbtPart.Text == "Kernel")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.KERNEL));
             }
             else if (cBFbtPart.Text == "Misc")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.MISC));
             }
             else if (cBFbtPart.Text == "Radio")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.RADIO));
             }
             else if (cBFbtPart.Text == "Ramdisk")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.RAMDISK));
             }
             else if (cBFbtPart.Text == "Recovery")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.RECOVERY));
             }
             else if (cBFbtPart.Text == "System")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.SYSTEM));
             }
             else if (cBFbtPart.Text == "Unlock Token")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.UNLOCKTOKEN));
             }
             else if (cBFbtPart.Text == "Zip")
             {
                 CidDialog ciddiag = CidDialog.Instance;
                 ciddiag.Show();
                 ciddiag.Add(Fastboot.Instance().Erase(IDDevicePartition.ZIP));
             }
         }
     }
 }
예제 #13
0
        private void btnFbtFlash_Click(object sender, RoutedEventArgs e)
        {
            if (tBFbtPath.Text == "")
            {
                if (MessageBox.Show("You have not selected a file to complete the command. \nWould you like to locate one now?", "Missing File", MessageBoxButton.YesNo, MessageBoxImage.Warning) == MessageBoxResult.Yes)
                {
                    // Create OpenFileDialog
                    Microsoft.Win32.OpenFileDialog dlg = new Microsoft.Win32.OpenFileDialog();

                    // Set filter for file extension and default file extension
                    dlg.DefaultExt = "";
                    dlg.Filter     = "All Files (*.*)|*.*";
                    dlg.Title      = "Locate Files";

                    // Display OpenFileDialog by calling ShowDialog method
                    Nullable <bool> result = dlg.ShowDialog();

                    // Get the selected file name and display in a TextBox
                    if (result == true)
                    {
                        // Open document
                        string filename = dlg.FileName;
                        tBFbtPath.Text = filename;
                    }
                }
                else
                {
                    MessageBox.Show("You cannot continue unless you select a file.", "Missing File", MessageBoxButton.OK, MessageBoxImage.Information);
                }
            }
            else if (cBFbtPart.Text == "")
            {
                MessageBox.Show("You cannot continue unless you select a partition.", "Partition not Selected", MessageBoxButton.OK, MessageBoxImage.Information);
            }
            else
            {
                if (cBFbtPart.Text == "Boot")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.BOOT, tBFbtPath.Text));
                }
                else if (cBFbtPart.Text == "Cache")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.CACHE, tBFbtPath.Text));
                }
                else if (cBFbtPart.Text == "Data")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.DATA, tBFbtPath.Text));
                }
                else if (cBFbtPart.Text == "Hboot")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.HBOOT, tBFbtPath.Text));
                }
                else if (cBFbtPart.Text == "Kernel")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.KERNEL, tBFbtPath.Text));
                }
                else if (cBFbtPart.Text == "Misc")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.MISC, tBFbtPath.Text));
                }
                else if (cBFbtPart.Text == "Radio")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.RADIO, tBFbtPath.Text));
                }
                else if (cBFbtPart.Text == "Ramdisk")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.RAMDISK, tBFbtPath.Text));
                }
                else if (cBFbtPart.Text == "Recovery")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.RECOVERY, tBFbtPath.Text));
                }
                else if (cBFbtPart.Text == "System")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.SYSTEM, tBFbtPath.Text));
                }
                else if (cBFbtPart.Text == "Unlock Token")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.UNLOCKTOKEN, tBFbtPath.Text));
                }
                else if (cBFbtPart.Text == "Zip")
                {
                    CidDialog ciddiag = CidDialog.Instance;
                    ciddiag.Show();
                    ciddiag.Add(Fastboot.Instance().Flash(IDDevicePartition.ZIP, tBFbtPath.Text));
                }
            }
        }