/// <summary>
/// Power Cycles the printer with wired IPv4 address.
/// Returns true if the printer is in ready state after the power cycle, else returns false.
/// </summary>
/// <returns>Returns true if the printer is ready, else return false.</returns>
public override bool PowerCycle()
{
try
{
Framework.Logger.LogInfo("Power cycle process using SSH initiated.");
SSHProtocol sshProtocol = new SSHProtocol(SSH_USERNAME, SSH_PASSWORD, _wiredIPv4Address);
sshProtocol.Connect();
sshProtocol.Send("{0}@{1}\n".FormatWith(SSH_USERNAME, _wiredIPv4Address));
sshProtocol.Send("reboot\n");
Thread.Sleep(TimeSpan.FromMinutes(_timeRequiredForPowerCycle));
Framework.Logger.LogInfo("Power cycle process using SSH completed.");
if (IsPrinterReady(_wiredIPv4Address, POWER_CYCLE))
{
Framework.Logger.LogInfo("Printer has come to ready state after PowerCycle");
return(true);
}
else
{
Framework.Logger.LogInfo("Printer failed to acquire ready state after PowerCycle");
return(false);
}
}
catch (Exception exception)
{
Framework.Logger.LogInfo("Power cycle process using SSH failed.");
Framework.Logger.LogDebug("Exception details: {0}".FormatWith(exception.Message));
throw exception;
}
}
/// <summary>
/// Restore Factory settings on the printer with wired IPv4 address.
/// Returns true if the printer is in ready state after the power cycle, else returns false.
/// </summary>
/// <returns>Returns true if the printer is ready, else return false.</returns>
public override bool ColdReset()
{
try
{
Framework.Logger.LogInfo("Restore Factory Settings process using SSH initiated.");
SSHProtocol sshProtocol = new SSHProtocol(SSH_USERNAME, SSH_PASSWORD, _wiredIPv4Address);
sshProtocol.Connect();
sshProtocol.Send("{0}@{1}\n".FormatWith(SSH_USERNAME, _wiredIPv4Address));
sshProtocol.Send("telnet localhost 9169\n");
sshProtocol.Send("set IO-RESET 1\n");
sshProtocol.Send("set IIO-2-NIC-RESET 1\n");
sshProtocol.Send("exit\n");
sshProtocol.Send("reboot\n");
Thread.Sleep(TimeSpan.FromMinutes(_timeRequiredForColdReset));
Framework.Logger.LogInfo("Restore Factory Settings process using SSH completed.");
if (IsPrinterReady(_wiredIPv4Address, COLD_RESET))
{
Framework.Logger.LogInfo("Printer has come to ready state after Restore Factory Settings.");
return(true);
}
else
{
Framework.Logger.LogInfo("Printer failed to acquire ready state after Restore Factory Settings.");
return(false);
}
}
catch (Exception exception)
{
Framework.Logger.LogInfo("Restore Factory Settings process using SSH failed.");
Framework.Logger.LogDebug("Exception details: {0}".FormatWith(exception.Message));
throw exception;
}
}
/// <summary>
/// Power cycles the printer asynchronously without checking the printer status.
/// <remarks>The method starts power cycling the printer.
/// It is the users responsibility to ensure that the printer is come back to ready state after the power cycle</remarks>
/// </summary>
public override void PowerCycleAsync()
{
try
{
Framework.Logger.LogInfo("Power cyle process using SSH initiated.");
SSHProtocol sshProtocol = new SSHProtocol(SSH_USERNAME, SSH_PASSWORD, _wiredIPv4Address);
sshProtocol.Connect();
sshProtocol.Send("{0}@{1}\n".FormatWith(SSH_USERNAME, _wiredIPv4Address));
sshProtocol.Send("reboot\n");
Framework.Logger.LogInfo("Power cycle process using SSH completed.");
}
catch (Exception exception)
{
Framework.Logger.LogInfo("Power cycle process using SSH failed.");
Framework.Logger.LogDebug("Exception details: {0}".FormatWith(exception.Message));
throw exception;
}
}
/// <summary>
/// Keep Awake the printer. Disables the Sleep Mode.
/// </summary>
public override void KeepAwake()
{
try
{
Framework.Logger.LogInfo("Sleep mode disabled using SSH.");
SSHProtocol sshProtocol = new SSHProtocol(SSH_USERNAME, SSH_PASSWORD, _wiredIPv4Address);
sshProtocol.Connect();
sshProtocol.Send("{0}@{1}\n".FormatWith(SSH_USERNAME, _wiredIPv4Address));
sshProtocol.Send("telnet localhost 9169\n");
sshProtocol.Send("set DEV-ENERGY-STAR-ENABLED false\n");
sshProtocol.Send("exit\n");
Framework.Logger.LogInfo("Sleep mode disabled successfully using SSH.");
}
catch (Exception exception)
{
Framework.Logger.LogInfo("Failed to disable Sleep mode using SSH.");
Framework.Logger.LogDebug("Exception details: {0}".FormatWith(exception.Message));
throw exception;
}
}
/// <summary>
/// Restore Factory settings asynchronisly on the printer with wired IPv4 address.
/// Returns true if the printer is in ready state after the power cycle, else returns false.
/// </summary>
/// <returns>Returns true if the printer is ready, else return false.</returns>
public override void ColdResetAsync()
{
try
{
Framework.Logger.LogInfo("Restore Factory Settings process using SSH initiated.");
SSHProtocol sshProtocol = new SSHProtocol(SSH_USERNAME, SSH_PASSWORD, _wiredIPv4Address);
sshProtocol.Connect();
sshProtocol.Send("{0}@{1}\n".FormatWith(SSH_USERNAME, _wiredIPv4Address));
sshProtocol.Send("telnet localhost 9169\n");
sshProtocol.Send("set IO-RESET 1\n");
sshProtocol.Send("set IIO-2-NIC-RESET 1\n");
sshProtocol.Send("exit\n");
sshProtocol.Send("reboot\n");
Framework.Logger.LogInfo("Restore Factory Settings process using SSH completed.");
}
catch (Exception exception)
{
Framework.Logger.LogInfo("Restore Factory Settings process using SSH failed.");
Framework.Logger.LogDebug("Exception details: {0}".FormatWith(exception.Message));
throw exception;
}
}