/// <summary>
/// NOTE: WORK IN PROGRESS - for now this will just clean out all triangles from
/// inside the outermost holes without paying attention to holes within holes..
/// hence the work in progress :)
///
/// Removes triangles inside "holes" (that are not inside of other holes already)
///
/// In the example below, assume that triangle ABC is a user-defined "hole". Thus
/// any triangles inside it (that aren't inside yet another user-defined hole inside
/// triangle ABC) should get removed. In this case, since there are no user-defined
/// holes inside ABC, we would remove triangles ADE, BCE, and CDE. We would also
/// need to combine the appropriate edges so that we end up with just triangle ABC
///
/// E
/// A +------+-----+ B A +-----------+ B
/// \ /| / \ /
/// \ / | / \ /
/// D + | / ======> \ /
/// \ | / \ /
/// \ |/ \ /
/// + +
/// C C
///
/// </summary>
private static void FinalizationConstraints(DTSweepContext tcx)
{
// Get an Internal triangle to start with
DelaunayTriangle t = tcx.Front.Head.Triangle;
TriangulationPoint p = tcx.Front.Head.Point;
while (!t.GetConstrainedEdgeCW(p))
{
DelaunayTriangle tTmp = t.NeighborCCWFrom(p);
if (tTmp == null)
{
break;
}
t = tTmp;
}
// Collect interior triangles constrained by edges
tcx.MeshClean(t);
}
private static void EdgeEvent(DTSweepContext tcx, TriangulationPoint ep, TriangulationPoint eq, DelaunayTriangle triangle, TriangulationPoint point)
{
TriangulationPoint p1, p2;
if (triangle == null)
{
return; // TODO: Added by Kronnect Games
}
if (IsEdgeSideOfTriangle(triangle, ep, eq))
{
return;
}
p1 = triangle.PointCCWFrom(point);
Orientation o1 = TriangulationUtil.Orient2d(eq, p1, ep);
if (o1 == Orientation.Collinear)
{
if (triangle.Contains(eq) && triangle.Contains(p1))
{
triangle.MarkConstrainedEdge(eq, p1);
// We are modifying the constraint maybe it would be better to
// not change the given constraint and just keep a variable for the new constraint
tcx.EdgeEvent.ConstrainedEdge.Q = p1;
triangle = triangle.NeighborAcrossFrom(point);
EdgeEvent(tcx, ep, p1, triangle, p1);
}
else
{
throw new PointOnEdgeException("EdgeEvent - Point on constrained edge not supported yet", ep, eq, p1);
}
return;
}
p2 = triangle.PointCWFrom(point);
Orientation o2 = TriangulationUtil.Orient2d(eq, p2, ep);
if (o2 == Orientation.Collinear)
{
if (triangle.Contains(eq) && triangle.Contains(p2))
{
triangle.MarkConstrainedEdge(eq, p2);
// We are modifying the constraint maybe it would be better to
// not change the given constraint and just keep a variable for the new constraint
tcx.EdgeEvent.ConstrainedEdge.Q = p2;
triangle = triangle.NeighborAcrossFrom(point);
EdgeEvent(tcx, ep, p2, triangle, p2);
}
else
{
throw new PointOnEdgeException("EdgeEvent - Point on constrained edge not supported yet", ep, eq, p2);
}
return;
}
if (o1 == o2)
{
// Need to decide if we are rotating CW or CCW to get to a triangle
// that will cross edge
if (o1 == Orientation.CW)
{
triangle = triangle.NeighborCCWFrom(point);
}
else
{
triangle = triangle.NeighborCWFrom(point);
}
EdgeEvent(tcx, ep, eq, triangle, point);
}
else
{
// This triangle crosses constraint so lets flippin start!
FlipEdgeEvent(tcx, ep, eq, triangle, point);
}
}
/// <summary>
/// Rotates a triangle pair one vertex CW
/// n2 n2
/// P +-----+ P +-----+
/// | t /| |\ t |
/// | / | | \ |
/// n1| / |n3 n1| \ |n3
/// | / | after CW | \ |
/// |/ oT | | oT \|
/// +-----+ oP +-----+
/// n4 n4
/// </summary>
private static void RotateTrianglePair(DelaunayTriangle t, TriangulationPoint p, DelaunayTriangle ot, TriangulationPoint op)
{
DelaunayTriangle n1, n2, n3, n4;
n1 = t.NeighborCCWFrom(p);
n2 = t.NeighborCWFrom(p);
n3 = ot.NeighborCCWFrom(op);
n4 = ot.NeighborCWFrom(op);
bool ce1, ce2, ce3, ce4;
ce1 = t.GetConstrainedEdgeCCW(p);
ce2 = t.GetConstrainedEdgeCW(p);
ce3 = ot.GetConstrainedEdgeCCW(op);
ce4 = ot.GetConstrainedEdgeCW(op);
bool de1, de2, de3, de4;
de1 = t.GetDelaunayEdgeCCW(p);
de2 = t.GetDelaunayEdgeCW(p);
de3 = ot.GetDelaunayEdgeCCW(op);
de4 = ot.GetDelaunayEdgeCW(op);
t.Legalize(p, op);
ot.Legalize(op, p);
// Remap dEdge
ot.SetDelaunayEdgeCCW(p, de1);
t.SetDelaunayEdgeCW(p, de2);
t.SetDelaunayEdgeCCW(op, de3);
ot.SetDelaunayEdgeCW(op, de4);
// Remap cEdge
ot.SetConstrainedEdgeCCW(p, ce1);
t.SetConstrainedEdgeCW(p, ce2);
t.SetConstrainedEdgeCCW(op, ce3);
ot.SetConstrainedEdgeCW(op, ce4);
// Remap neighbors
// XXX: might optimize the markNeighbor by keeping track of
// what side should be assigned to what neighbor after the
// rotation. Now mark neighbor does lots of testing to find
// the right side.
t.Neighbors.Clear();
ot.Neighbors.Clear();
if (n1 != null)
{
ot.MarkNeighbor(n1);
}
if (n2 != null)
{
t.MarkNeighbor(n2);
}
if (n3 != null)
{
t.MarkNeighbor(n3);
}
if (n4 != null)
{
ot.MarkNeighbor(n4);
}
t.MarkNeighbor(ot);
}