public void ExtrudedCircularProfilesTest()
{
var xbimGeometryCreator = new XbimGeometryEngine();
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\15 - Swept pipes.ifc", null, null, true, true);
foreach (
var cp in
m.Instances.OfType <IfcExtrudedAreaSolid>().Where(e => e.SweptArea is IfcCircleProfileDef))
{
Assert.IsTrue(cp != null, "No Extruded Solid found");
Assert.IsTrue(cp.SweptArea is IfcCircleProfileDef, "Incorrect profiledef found");
var solid = xbimGeometryCreator.CreateSolid(cp);
Assert.IsTrue(eventTrace.Events.Count == 0); //no events should have been raised from this call
IfcCsgTests.GeneralTest(solid);
}
//Assert.IsTrue(solid.Faces.Count() == 10, "T Shaped profiles should have 10 faces");
}
}
}
public void ConvertIfcCylinderToBRepTest()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
var cylinder = IfcModelBuilder.MakeRightCircularCylinder(m, 10, 20);
var solid = _xbimGeometryCreator.CreateSolid(cylinder);
var brep = _xbimGeometryCreator.CreateFacetedBrep(m, solid);
var solid2 = _xbimGeometryCreator.CreateSolidSet(brep);
txn.Commit();
try
{
//Uncomment below to see the results in Ifc
//m.SaveAs("brep.ifc", XbimStorageType.IFC);
}
catch (Exception)
{
Assert.IsTrue(false, "Failed to save the results to Ifc");
}
Assert.IsTrue(solid2.Count == 1, "Expected one solid");
IfcCsgTests.GeneralTest(solid2.First);
Assert.IsTrue(brep.Outer.CfsFaces.Count == solid2.First.Faces.Count, "Number of faces in round tripped solid is not the same");
}
}
}
public void IfcExtrudedArea_With_IfcArbritraryClosedProfileDef_And_IfcCompositeCurve()
{
var xbimGeometryCreator = new XbimGeometryEngine();
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\2- IfcExtrudedAreaSolid-IfcArbitraryClosedProfileDef-IfcCompositeCurve.ifc", null, null, true, true);
var eas = m.Instances.OfType <IfcExtrudedAreaSolid>().FirstOrDefault();
Assert.IsTrue(eas != null);
Assert.IsTrue(eas.SweptArea is IfcArbitraryClosedProfileDef, "Incorrect profile definition");
Assert.IsTrue(((IfcArbitraryClosedProfileDef)eas.SweptArea).OuterCurve is IfcCompositeCurve, "Incorrect SweptArea type");
var solid = xbimGeometryCreator.CreateSolid(eas);
Assert.IsTrue(eventTrace.Events.Count == 0, "Warnings or errors raised in geometry conversion"); //no events should have been raised from this call
IfcCsgTests.GeneralTest(solid);
//now make the extrusion invalid
eas.Depth = 0;
solid = xbimGeometryCreator.CreateSolid(eas);
Assert.IsTrue(eventTrace.Events.Count == 1, "An expected error was not raised raised in geometry conversion"); //we should have an event here
Assert.IsTrue(Math.Abs(solid.Volume) < m.ModelFactors.Precision);
Assert.IsTrue(solid.BoundingBox.IsEmpty);
Assert.IsFalse(solid.IsValid);
}
}
}
public void RectangleProfileDefTest()
{
var xbimGeometryCreator = new XbimGeometryEngine();
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\1- IfcExtrudedAreaSolid-IfcProfileDef-Parameterised.ifc", null, null, true, true);
var eas = m.Instances.OfType <IfcExtrudedAreaSolid>().FirstOrDefault(e => e.SweptArea.GetType() == typeof(IfcRectangleProfileDef));
Assert.IsTrue(eas != null, "No Extruded Solid found");
Assert.IsTrue(eas.SweptArea is IfcRectangleProfileDef, "Incorrect profiledef found");
var solid = xbimGeometryCreator.CreateSolid(eas);
Assert.IsTrue(eventTrace.Events.Count == 0); //no events should have been raised from this call
IfcCsgTests.GeneralTest(solid);
Assert.IsTrue(solid.Faces.Count() == 6, "Rectangular profiles should have six faces");
////now make the extrusion invalid
//eas.Depth = 0;
//solid = XbimGeometryCreator.CreateSolid(eas);
//Assert.IsTrue(eventTrace.Events.Count == 1); //we should have an event here
//Assert.IsTrue(Math.Abs(solid.Volume) < m.ModelFactors.Precision);
//Assert.IsTrue(solid.BoundingBox.IsEmpty);
//Assert.IsFalse(solid.IsValid);
}
}
}
public void ConvertIfcCircleHollowProfileToBRepTest()
{
using (var m = IfcModelBuilder.CreateandInitModel())
{
using (var txn = m.BeginTransaction())
{
//add a shape
//Create a Definition shape to hold the geometry
var shape = m.Instances.New <IfcShapeRepresentation>();
shape.ContextOfItems = m.IfcProject.ModelContext();
shape.RepresentationType = "Brep";
shape.RepresentationIdentifier = "Body";
//Create a Product Definition and add the model geometry to the wall
var rep = m.Instances.New <IfcProductDefinitionShape>();
rep.Representations.Add(shape);
var building = m.Instances.OfType <IfcBuilding>().FirstOrDefault();
Assert.IsNotNull(building, "Failed to find Building");
building.Representation = rep;
var block = IfcModelBuilder.MakeExtrudedAreaSolid(m, IfcModelBuilder.MakeCircleHollowProfileDef(m, 1000, 500), 3000);
var solid = _xbimGeometryCreator.CreateSolid(block);
var brep = _xbimGeometryCreator.CreateFacetedBrep(m, solid);
shape.Items.Add(brep);
var solid2 = _xbimGeometryCreator.CreateSolidSet(brep); //round trip it
txn.Commit();
try
{
//Uncomment below to see the results in Ifc
//m.SaveAs("brep.ifc", XbimStorageType.IFC);
}
catch (Exception)
{
Assert.IsTrue(false, "Failed to save the results to Ifc");
}
Assert.IsTrue(solid2.Count == 1, "Expected one solid");
IfcCsgTests.GeneralTest(solid2.First);
Assert.IsTrue(brep.Outer.CfsFaces.Count == solid2.First.Faces.Count, "Number of faces in round tripped solid is not the same");
}
}
}
public void ConvertIfcBlockToBRepTest()
{
using (var m = XbimModel.CreateTemporaryModel())
{
using (var txn = m.BeginTransaction())
{
var block = IfcModelBuilder.MakeBlock(m, 10, 15, 20);
var solid = _xbimGeometryCreator.CreateSolid(block);
var brep = _xbimGeometryCreator.CreateFacetedBrep(m, solid);
var xrep = _xbimGeometryCreator.CreateSolidSet(brep);
Assert.IsTrue(xrep.Count == 1, "Expected one solid");
Assert.IsTrue(solid.Volume - xrep.First.Volume <= m.ModelFactors.Precision, "Volume of round tripped block is not the same");
IfcCsgTests.GeneralTest(xrep.First);
}
}
}
public void IfcRevolvedArea_With_IfcCircleHollowProfileDef()
{
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\5- IfcRevolvedAreaSolid-IfcCircularHollowProfileDef.ifc", null, null, true, true);
var ss = m.Instances.OfType <IfcRevolvedAreaSolid>().FirstOrDefault(e => e.SweptArea is IfcCircleHollowProfileDef);
Assert.IsTrue(ss != null, "No Revolved Area found");
Assert.IsTrue(ss.SweptArea is IfcCircleHollowProfileDef, "Incorrect profiledef found");
var solid = _xbimGeometryCreator.CreateSolid(ss);
Assert.IsTrue(eventTrace.Events.Count == 0); //no events should have been raised from this call
IfcCsgTests.GeneralTest(solid);
Assert.IsTrue(solid.Faces.Count() == 4, "Circle Hollow profiles should have 4 faces");
}
}
}
public void IfcSurfaceCurveSweptAreaSolid()
{
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\11- IfcSurfaceCurveSweptAreaSolid.ifc", null, null, true, true);
var ss = m.Instances.OfType <IfcSurfaceCurveSweptAreaSolid>().FirstOrDefault();
Assert.IsTrue(ss != null, "No Swept Disk found");
var solid = _xbimGeometryCreator.CreateSolid(ss);
Assert.IsTrue(eventTrace.Events.Count == 0); //no events should have been raised from this call
IfcCsgTests.GeneralTest(solid);
Assert.IsTrue(solid.Faces.Count() == 6, "This IfcSurfaceCurveSweptAreaSolid with hollow circular profile def should have 6 faces");
}
}
}
public void IfcFacetedBRepWithMultipleSolids()
{
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\12 - Multiple FacetedBrep.ifc", null, null, true, true);
var fbr = m.Instances[25] as IfcFacetedBrep;
Assert.IsTrue(fbr != null, "No IfcFacetedBRep found");
int faceCount = fbr.Outer.CfsFaces.Count;
var solids = _xbimGeometryCreator.CreateSolidSet(fbr);
Assert.IsTrue(solids.Count == 11, "Expected 11 solids");
foreach (var solid in solids)
{
IfcCsgTests.GeneralTest(solid, true);
}
}
}
}
public void IfcSweptDisk_With_IfcComposite()
{
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\6- IfcSweptDiskSolid_With_BooleanResult.ifc", null, null, true, true);
var ss = m.Instances.OfType <IfcSweptDiskSolid>().FirstOrDefault(e => e.Directrix is IfcCompositeCurve);
Assert.IsTrue(ss != null, "No Swept Disk found");
Assert.IsTrue(ss.Directrix is IfcCompositeCurve, "Incorrect sweep found");
var solid = _xbimGeometryCreator.CreateSolid(ss);
Assert.IsTrue(eventTrace.Events.Count == 0); //no events should have been raised from this call
IfcCsgTests.GeneralTest(solid);
Assert.IsTrue(solid.Faces.Count() == 4, "Swept disk solids along a this composite curve should have 4 faces");
}
}
}
public void CompositeProfileDefTest()
{
var xbimGeometryCreator = new XbimGeometryEngine();
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\IfcCompositeProfileDefTest.ifc", null, null, true, true);
var eas = m.Instances.OfType <IfcExtrudedAreaSolid>().FirstOrDefault(e => e.SweptArea.GetType() == typeof(IfcCompositeProfileDef));
Assert.IsTrue(eas != null, "No Extruded Solid found");
Assert.IsTrue(eas.SweptArea is IfcCompositeProfileDef, "Incorrect profiledef found");
var solid = xbimGeometryCreator.CreateSolid(eas);
Assert.IsTrue(eventTrace.Events.Count == 0); //no events should have been raised from this call
IfcCsgTests.GeneralTest(solid);
Assert.IsTrue(solid.Faces.Count() == 40, "IfcCompositeProfileDef profile should have six faces");
}
}
}
public void IfcFacetedBRepTest()
{
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\12 - Multiple FacetedBrep.ifc", null, null, true, true);
var fbr = m.Instances[780] as IfcFacetedBrep;
Assert.IsTrue(fbr != null, "No IfcFacetedBRep found");
int faceCount = fbr.Outer.CfsFaces.Count;
var solids = _xbimGeometryCreator.CreateSolidSet(fbr);
Assert.IsTrue(eventTrace.Events.Count == 0, "Warning or Error events were raised"); //we should have no warnings
Assert.IsTrue(solids.Count == 1, "Expected 11 solids");
IfcCsgTests.GeneralTest(solids.First);
Assert.IsTrue(solids.First.Faces.Count() == faceCount, "Failed to convert all faces");
}
}
}
public void IfcExtrudedArea_With_IfcArbritraryProfileDefWithVoids()
{
var xbimGeometryCreator = new XbimGeometryEngine();
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\18 - IfcArbritaryClosedProfileDefWithVoids.ifc", null, null, true, true);
var eas = m.Instances.OfType <IfcExtrudedAreaSolid>().FirstOrDefault(e => e.SweptArea is IfcArbitraryProfileDefWithVoids);
Assert.IsTrue(eas != null);
Assert.IsTrue(eas.SweptArea is IfcArbitraryProfileDefWithVoids, "Incorrect profile definition");
var solid = xbimGeometryCreator.CreateSolid(eas);
Assert.IsTrue(eventTrace.Events.Count == 0, "Warnings or errors raised in geometry conversion"); //no events should have been raised from this call
IfcCsgTests.GeneralTest(solid);
//Assert.IsTrue(solid.Faces.Count() == 6, "IfcPolyline profiles should have (number of polyline egdes + 2) faces");
}
}
}
public void TestDerivedProfileDefWithLShapedParent()
{
var xbimGeometryCreator = new XbimGeometryEngine();
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\1- IfcExtrudedAreaSolid-IfcProfileDef-Parameterised.ifc", null, null, true, true);
var eas = m.Instances.OfType <IfcExtrudedAreaSolid>().FirstOrDefault(e => e.SweptArea is IfcDerivedProfileDef && ((IfcDerivedProfileDef)e.SweptArea).ParentProfile is IfcLShapeProfileDef);
Assert.IsTrue(eas != null, "No Extruded Solid found");
Assert.IsTrue(eas.SweptArea is IfcDerivedProfileDef, "Incorrect profiledef found");
Assert.IsTrue(((IfcDerivedProfileDef)eas.SweptArea).ParentProfile is IfcLShapeProfileDef, "Incorrect parent profiledef found");
var solid = xbimGeometryCreator.CreateSolid(eas);
Assert.IsTrue(eventTrace.Events.Count == 0); //no events should have been raised from this call
IfcCsgTests.GeneralTest(solid);
Assert.IsTrue(solid.Faces.Count() == 8, "L Shaped profiles should have 8 faces");
}
}
}
public void IfcExtrudedArea_With_IfcArbritraryClosedProfileDef_And_IfcPolyline()
{
var xbimGeometryCreator = new XbimGeometryEngine();
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\1- IfcExtrudedAreaSolid-IfcProfileDef-Parameterised.ifc", null, null, true, true);
var eas = m.Instances.OfType <IfcExtrudedAreaSolid>().FirstOrDefault(e => e.SweptArea is IfcArbitraryClosedProfileDef && ((IfcArbitraryClosedProfileDef)e.SweptArea).OuterCurve is IfcPolyline);
Assert.IsTrue(eas != null);
Assert.IsTrue(eas.SweptArea is IfcArbitraryClosedProfileDef, "Incorrect profile definition");
Assert.IsTrue(((IfcArbitraryClosedProfileDef)eas.SweptArea).OuterCurve is IfcPolyline, "Incorrect SweptArea outer curve type");
var solid = xbimGeometryCreator.CreateSolid(eas);
Assert.IsTrue(eventTrace.Events.Count == 0, "Warnings or errors raised in geometry conversion"); //no events should have been raised from this call
IfcCsgTests.GeneralTest(solid);
var plineCount = ((IfcPolyline)((IfcArbitraryClosedProfileDef)eas.SweptArea).OuterCurve).Points.Count - 1;
Assert.IsTrue(solid.Faces.Count() == plineCount + 2, "IfcPolyline profiles should have (number of polyline egdes + 2) faces");
}
}
}
public void BIM_Logo_LetterB_Test()
{
var xbimGeometryCreator = new XbimGeometryEngine();
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
using (var m = new XbimModel())
{
m.CreateFrom("SolidTestFiles\\BIM Logo-LetterB.ifc", null, null, true, true);
var eas = m.Instances[88] as IfcCsgSolid;
Assert.IsTrue(eas != null, "No CSG Solid found");
var solid = (IXbimSolid)xbimGeometryCreator.Create(eas);
Assert.IsTrue(eventTrace.Events.Count == 0); //no events should have been raised from this call
IfcCsgTests.GeneralTest(solid);
Assert.IsTrue(solid.Faces.Count() == 15, "Letter B should have 15 faces");
var xbimTessellator = new XbimTessellator(m, XbimGeometryType.PolyhedronBinary);
// Assert.IsTrue(xbimTessellator.CanMesh(solid));//if we can mesh the shape directly just do it
// var shapeGeom = xbimTessellator.Mesh(solid);
var shapeGeom = xbimGeometryCreator.CreateShapeGeometry(solid, m.ModelFactors.Precision, m.ModelFactors.DeflectionTolerance, m.ModelFactors.DeflectionAngle, XbimGeometryType.PolyhedronBinary);
}
}
}
public void TestAllModels()
{
const string modelDirectory = ""; // enter your model directoy here "@"D:\Users\steve\xBIM\Test Models\Use Cases\Live";#
if (string.IsNullOrWhiteSpace(modelDirectory))
{
Trace.WriteLine("TestAllModels tests skipped. Enter a directory where the test models can be found");
return;
}
var di = new DirectoryInfo(modelDirectory);
FileInfo[] toProcess = di.GetFiles("*.IFC", SearchOption.TopDirectoryOnly);
foreach (var file in toProcess)
{
using (var m = new XbimModel())
{
m.CreateFrom(file.FullName, null, null, true, true);
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
foreach (var rep in m.Instances.OfType <IfcGeometricRepresentationItem>())
{
if (rep is IfcAxis2Placement ||
rep is IfcCartesianPoint ||
rep is IfcDirection ||
rep is IfcCartesianTransformationOperator ||
rep is IfcPlanarExtent ||
rep is IfcTextLiteralWithExtent ||
rep is IfcFillAreaStyleHatching
)
{
continue;
}
var shape = _xbimGeometryCreator.Create(rep);
// var w = new XbimOccWriter();
//IXbimSolidSet solids = shape as IXbimSolidSet;
//foreach (var solid in solids)
//{
// w.Write(solid, "d:\\xbim\\f" + i++);
//}
if (!shape.IsValid)
{
Assert.IsTrue(shape.IsValid, "Invalid shape found");
}
var solid = shape as IXbimSolid;
if (solid != null)
{
// w.Write(solid, "d:\\xbim\\x" + rep.EntityLabel.ToString());
IfcCsgTests.GeneralTest((IXbimSolid)shape, true, rep is IfcHalfSpaceSolid, rep.EntityLabel);
}
}
if (eventTrace.Events.Count > 0)
{
//var assertNow = false;
Trace.WriteLine("Model: " + file.Name);
foreach (var err in eventTrace.Events)
{
Trace.WriteLine(err.Message);
//if (err.EventLevel == EventLevel.ERROR)
// assertNow = true;
}
// Assert.IsTrue(assertNow == false, "Error events were raised");
}
}
}
}
}
public void TestCuttingOpenings()
{
// var w = new XbimOccWriter();
const string modelDirectory = "";//define where your files to test are @"D:\Users\steve\xBIM\Test Models\Use Cases\Live";
if (string.IsNullOrWhiteSpace(modelDirectory))
{
Trace.WriteLine("TestCuttingOpenings tests skipped. Enter a directory where the test models can be found");
return;
}
var di = new DirectoryInfo(modelDirectory);
FileInfo[] toProcess = di.GetFiles("*.IFC", SearchOption.TopDirectoryOnly);
foreach (var file in toProcess)
{
using (var m = new XbimModel())
{
m.CreateFrom(file.FullName, null, null, true, true);
using (var eventTrace = LoggerFactory.CreateEventTrace())
{
var theElements = _xbimGeometryCreator.CreateSolidSet();
var openings = m.Instances.OfType <IfcRelVoidsElement>()
.Where(
r =>
r.RelatingBuildingElement.Representation != null &&
r.RelatedOpeningElement.Representation != null)
.Select(
f =>
new
{
element = f.RelatingBuildingElement,
feature = f.RelatedOpeningElement
});
var toCut = openings.GroupBy(x => x.element, y => y.feature).ToList();
Parallel.ForEach(toCut, new ParallelOptions(), rel =>
// foreach (var rel in toCut)
{
var elem = rel.Key;
var elemTransform = elem.Transform();
var elemSolids = _xbimGeometryCreator.CreateSolidSet();
foreach (var rep in elem.Representation.Representations)
{
if (rep.ContextOfItems.ContextType != null &&
"Model" == rep.ContextOfItems.ContextType.Value.ToString() && (rep.RepresentationIdentifier.HasValue && rep.RepresentationIdentifier == "Body"))
{
foreach (var item in rep.Items.OfType <IfcGeometricRepresentationItem>())
{
IXbimGeometryObject shape = _xbimGeometryCreator.Create(item);
if (!shape.IsValid)
{
Assert.IsTrue(shape.IsValid, "Invalid shape found in #" + item.EntityLabel);
}
var solid = shape as IXbimSolid;
if (solid != null)
{
IfcCsgTests.GeneralTest(solid, true, item is IfcHalfSpaceSolid,
rep.EntityLabel);
solid = (IXbimSolid)solid.Transform(elemTransform);
elemSolids.Add(solid);
}
else if (shape is IXbimSolidSet)
{
foreach (var subSolid in shape as IXbimSolidSet)
{
IfcCsgTests.GeneralTest(subSolid, true, item is IfcHalfSpaceSolid,
rep.EntityLabel);
elemSolids.Add(subSolid.Transform(elemTransform));
}
}
else if (shape is IXbimGeometryObjectSet)
{
foreach (var subShape in shape as IXbimGeometryObjectSet)
{
if (subShape is IXbimSolid)
{
IfcCsgTests.GeneralTest((IXbimSolid)subShape, true,
item is IfcHalfSpaceSolid,
rep.EntityLabel);
}
elemSolids.Add(subShape.Transform(elemTransform));
}
}
else
{
Trace.WriteLine("No Solid found #" + item.EntityLabel + " " +
shape.GetType().Name);
}
}
}
}
var openingSolids = _xbimGeometryCreator.CreateSolidSet();
foreach (var opening in rel)
{
var openingTransform = opening.Transform();
foreach (var openingrep in opening.Representation.Representations)
{
if (openingrep.ContextOfItems.ContextType != null &&
"Model" == openingrep.ContextOfItems.ContextType.Value.ToString() && (openingrep.RepresentationIdentifier.HasValue && openingrep.RepresentationIdentifier == "Body"))
{
foreach (
var openingitem in openingrep.Items.OfType <IfcGeometricRepresentationItem>()
)
{
IXbimGeometryObject openingshape = _xbimGeometryCreator.Create(openingitem);
if (!openingshape.IsValid)
{
Trace.WriteLine("Invalid shape found in #" + openingitem.EntityLabel);
continue;
}
var openingsolid = openingshape as IXbimSolid;
if (openingsolid != null)
{
IfcCsgTests.GeneralTest((IXbimSolid)openingshape, true,
openingitem is IfcHalfSpaceSolid,
openingrep.EntityLabel);
openingsolid = (IXbimSolid)openingsolid.Transform(openingTransform);
openingSolids.Add(openingsolid);
}
else if (openingshape is IXbimSolidSet)
{
foreach (var subOpeningSolid in openingshape as IXbimSolidSet)
{
IfcCsgTests.GeneralTest(subOpeningSolid, true,
openingitem is IfcHalfSpaceSolid,
openingrep.EntityLabel);
openingSolids.Add(subOpeningSolid.Transform(openingTransform));
}
}
else if (openingshape is IXbimGeometryObjectSet)
{
foreach (var subShape in openingshape as IXbimGeometryObjectSet)
{
if (subShape is IXbimSolid)
{
IfcCsgTests.GeneralTest((IXbimSolid)subShape, true,
openingitem is IfcHalfSpaceSolid,
openingrep.EntityLabel);
}
openingSolids.Add(subShape.Transform(openingTransform));
}
}
else
{
Trace.WriteLine("No Solid found #" + openingitem.EntityLabel + " " +
openingshape.GetType().Name);
}
}
}
}
}
// ReSharper disable once AccessToDisposedClosure
var solidResult = elemSolids.Cut(openingSolids, m.ModelFactors.PrecisionBoolean);
foreach (var result in solidResult)
{
IfcCsgTests.GeneralTest(result, true, false,
elem.EntityLabel);
theElements.Add(result);
}
}
);
// w.Write(theElements, "d:\\xbim\\r");
if (eventTrace.Events.Count > 0)
{
//var assertNow = false;
Trace.WriteLine("Model: " + file.Name);
foreach (var err in eventTrace.Events)
{
Trace.WriteLine(err.Message);
//if (err.EventLevel == EventLevel.ERROR)
// assertNow = true;
}
// Assert.IsTrue(assertNow == false, "Error events were raised");
}
}
}
}
}