//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//생성 :
//추가 :
//목적 : 라이브 시 해당 델리게이트 호출
//설명 : 동기 호출
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
public void UpdateDisplayLive(int iCameraIndex, Cognex.VisionPro.CogImage8Grey objLiveImage)
{
CFormDisplay obj = m_objFormDisplay[iCameraIndex] as CFormDisplay;
do
{
if (null == obj)
{
break;
}
// 라이브는 바로 날림
obj.UpdateDisplay(objLiveImage);
} while(false);
}
public void UpdateDisplayPMS(enumDisplayIndex eDisplayIndex, CInspectionResult.CResult objResult)
{
CFormDisplay obj = m_objFormDisplay[( int )eDisplayIndex] as CFormDisplay;
do
{
if (null == obj)
{
break;
}
obj.BeginInvoke(obj.m_objDelegateUpdateDisplayPMSImage, objResult);
} while (false);
}
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//생성 :
//추가 :
//목적 : 이미지 저장 해당 델리게이트 호출
//설명 : 비동기 호출
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
public void SaveImage(int iCameraIndex, CInspectionResult.CResult objResult)
{
var pDocument = CDocument.GetDocument;
CFormDisplay obj = m_objFormDisplay[iCameraIndex] as CFormDisplay;
do
{
if (null == obj)
{
break;
}
if (CDefine.enumRunMode.RUN_MODE_START == pDocument.GetRunMode())
{
obj.BeginInvoke(obj.m_objDelegateSaveImage, objResult, false);
}
else
{
obj.BeginInvoke(obj.m_objDelegateSaveImage, objResult, true);
}
} while(false);
}
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//생성 :
//추가 :
//목적 : 폼 초기화
//설명 :
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
public bool InitializeForm()
{
bool bReturn = false;
do
{
var pDocument = CDocument.GetDocument;
m_iCameraCount = ( int )CDefine.enumCamera.CAMERA_FINAL;
// 검사 결과 ( 디스플레이 & 데이터 갱신 )
m_delegateUpdateDisplayResultVIDI = new DelegateUpdateDisplay(UpdateDisplayResultVIDI);
m_delegateUpdateDisplayResultMeasure = new DelegateUpdateDisplay(UpdateDisplayResultMeasure);
m_delegateUpdateDisplayOriginal = new DelegateUpdateDisplay(UpdateDisplayOriginal);
m_delegateUpdateDisplayPMS = new DelegateUpdateDisplay(UpdateDisplayPMS);
m_delegateUpdateResult = new DelegateUpdateResult(UpdateResult);
// 라이브 결과 ( 디스플레이 )
m_delegateUpdateDisplayLive = new DelegateUpdateDisplayLive(UpdateDisplayLive);
// 이미지 저장
m_delegateSaveImage = new DelegateSaveImage(SaveImage);
// 리스트 로그
m_objListLog = new ListBox[m_iCameraCount];
m_objListLog[( int )CDefine.enumCamera.CAMERA_1] = this.listLogInputTray1;
// 디스플레이 화면 생성
{
m_iDisplayIndex = ( int )enumDisplayIndex.DISPLAY_FINAL;
m_objPanelDisplay = new Panel[m_iDisplayIndex];
m_objPanelDisplay[( int )enumDisplayIndex.PMS] = this.panelDisplayPMS;
m_objPanelDisplay[( int )enumDisplayIndex.ORIGIN_1] = this.panelDisplayOriginalImage1;
m_objPanelDisplay[( int )enumDisplayIndex.ORIGIN_2] = this.panelDisplayOriginalImage2;
m_objPanelDisplay[( int )enumDisplayIndex.ORIGIN_3] = this.panelDisplayOriginalImage3;
m_objPanelDisplay[( int )enumDisplayIndex.ORIGIN_4] = this.panelDisplayOriginalImage4;
m_objPanelDisplay[( int )enumDisplayIndex.VIDI_1] = this.panelDisplayVidi1;
m_objPanelDisplay[( int )enumDisplayIndex.VIDI_2] = this.panelDisplayVidi2;
m_objPanelDisplay[( int )enumDisplayIndex.VIDI_3] = this.panelDisplayVidi3;
m_objPanelDisplay[( int )enumDisplayIndex.MEASURE_1] = this.panelDisplayVidi4;
m_objPanelDisplay[( int )enumDisplayIndex.MEASURE_2] = this.panelDisplayVidi5;
m_objPanelDisplay[( int )enumDisplayIndex.MEASURE_3] = this.panelDisplayVidi6;
// 폼 디스플레이 생성
m_objFormDisplay = new Form[m_iDisplayIndex];
m_objDisplaySize = new Size[m_iDisplayIndex];
m_objDisplayLocation = new Point[m_iDisplayIndex];
string[] strDisplayName = new string[m_objFormDisplay.Length];
strDisplayName[( int )enumDisplayIndex.PMS] = enumDisplayIndex.PMS.ToString();
strDisplayName[( int )enumDisplayIndex.ORIGIN_1] = enumDisplayIndex.ORIGIN_1.ToString();
strDisplayName[( int )enumDisplayIndex.ORIGIN_2] = enumDisplayIndex.ORIGIN_2.ToString();
strDisplayName[( int )enumDisplayIndex.ORIGIN_3] = enumDisplayIndex.ORIGIN_3.ToString();
strDisplayName[( int )enumDisplayIndex.ORIGIN_4] = enumDisplayIndex.ORIGIN_4.ToString();
strDisplayName[( int )enumDisplayIndex.VIDI_1] = enumDisplayIndex.VIDI_1.ToString();
strDisplayName[( int )enumDisplayIndex.VIDI_2] = enumDisplayIndex.VIDI_2.ToString();
strDisplayName[( int )enumDisplayIndex.VIDI_3] = enumDisplayIndex.VIDI_3.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_1] = enumDisplayIndex.MEASURE_1.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_2] = enumDisplayIndex.MEASURE_2.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_3] = enumDisplayIndex.MEASURE_3.ToString();
for (int iLoopCount = 0; iLoopCount < m_objFormDisplay.Length; iLoopCount++)
{
// 디스플레이 화면 생성 & 초기화
CFormDisplay objForm = new CFormDisplay();
int iImageIndex = 0;
if (( int )enumDisplayIndex.VIDI_1 > iLoopCount && ( int )enumDisplayIndex.PMS < iLoopCount)
{
iImageIndex = iLoopCount - ( int )enumDisplayIndex.ORIGIN_1;
}
else if (( int )enumDisplayIndex.VIDI_1 <= iLoopCount && ( int )enumDisplayIndex.MEASURE_1 > iLoopCount)
{
iImageIndex = iLoopCount - ( int )enumDisplayIndex.VIDI_1;
}
else if (( int )enumDisplayIndex.MEASURE_1 <= iLoopCount)
{
iImageIndex = iLoopCount - ( int )enumDisplayIndex.MEASURE_1;
}
objForm.Initialize(( int )CDefine.enumCamera.CAMERA_1, string.Format("{0}", strDisplayName[iLoopCount]), false, iImageIndex);
objForm.SetDisplayIndex(iLoopCount);
objForm.Visible = true;
objForm.SetTimer(true);
// 사이즈 조정
Panel objPanel = m_objPanelDisplay[iLoopCount];
objForm.SetSize(objPanel.Location.X, objPanel.Location.Y, objPanel.Width, objPanel.Height, true);
// 디스플레이 사이즈 변경 이벤트 추가
objForm.EventChangeSizeDisplay += new CFormDisplay.DelegateChangeSizeDisplay(ChangeDisplaySize);
// 패널에 화면 붙임
SetFormDockStyle(objForm, objPanel);
m_objFormDisplay[iLoopCount] = objForm;
// 원본 패널 사이즈 및 위치 저장
m_objDisplaySize[iLoopCount] = m_objPanelDisplay[iLoopCount].Size;
m_objDisplayLocation[iLoopCount] = m_objPanelDisplay[iLoopCount].Location;
}
}
// 디스플레이 확대 화면 생성
m_objFormDisplayChangeSize = new CFormDisplayChangeSize();
// 버튼 색상 정의
SetButtonColor();
// 초기화 언어 변경
SetChangeLanguage();
// 버튼 이벤트 로그 정의
SetButtonEventChange();
// 타이머 외부에서 제어
timer.Interval = 100;
timer.Enabled = false;
bReturn = true;
} while(false);
return(bReturn);
}
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//생성 :
//추가 :
//목적 : 초기화
//설명 :
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
private bool Initialize()
{
bool bReturn = false;
var pDocument = CDocument.GetDocument;
do
{
InitializeForm();
m_delegateUpdateDisplayResult = new DelegateUpdateDisplay(UpdateDisplayResult);
m_delegateUpdateDisplayResultHistory = new DelegateUpdateDisplayHistory(UpdateDisplayResultHistory);
// 디스플레이 화면 생성
{
m_iDisplayIndex = ( int )enumDisplayIndex.DISPLAY_FINAL;
m_objPanelDisplayLeft = new Panel[m_iDisplayIndex];
m_objPanelDisplayLeft[( int )enumDisplayIndex.OIRGINAL] = this.panelDisplayPosition22;
m_objPanelDisplayLeft[( int )enumDisplayIndex.MEASURE_1] = this.panelDisplayMeasure11;
m_objPanelDisplayLeft[( int )enumDisplayIndex.MEASURE_2] = this.panelDisplayMeasure12;
m_objPanelDisplayLeft[( int )enumDisplayIndex.MEASURE_3] = this.panelDisplayMeasure13;
m_objPanelDisplayLeft[( int )enumDisplayIndex.MEASURE_4] = this.panelDisplayMeasure14;
m_objPanelDisplayLeft[( int )enumDisplayIndex.MEASURE_5] = this.panelDisplayMeasure15;
m_objPanelDisplayLeft[( int )enumDisplayIndex.MEASURE_6] = this.panelDisplayMeasure16;
// 폼 디스플레이 생성
m_objFormDisplayLeft = new Form[m_iDisplayIndex];
string[] strDisplayName = new string[m_objFormDisplayLeft.Length];
strDisplayName[( int )enumDisplayIndex.OIRGINAL] = enumDisplayIndex.OIRGINAL.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_1] = enumDisplayIndex.MEASURE_1.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_2] = enumDisplayIndex.MEASURE_2.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_3] = enumDisplayIndex.MEASURE_3.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_4] = enumDisplayIndex.MEASURE_4.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_5] = enumDisplayIndex.MEASURE_5.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_6] = enumDisplayIndex.MEASURE_6.ToString();
for (int iLoopCount = 0; iLoopCount < m_objFormDisplayLeft.Length; iLoopCount++)
{
// 디스플레이 화면 생성 & 초기화
CFormDisplay objForm = new CFormDisplay();
int iImageIndex = 0;
if (( int )enumDisplayIndex.OIRGINAL == iLoopCount)
{
iImageIndex = iLoopCount;
}
else if (( int )enumDisplayIndex.MEASURE_1 <= iLoopCount)
{
iImageIndex = iLoopCount - ( int )enumDisplayIndex.MEASURE_1;
}
objForm.Initialize(( int )CDefine.enumCamera.CAMERA_1, string.Format("{0}", strDisplayName[iLoopCount]), false, iImageIndex);
objForm.UseMeasureInfo3D();
objForm.Visible = true;
objForm.SetTimer(true);
// 사이즈 조정
Panel objPanel = m_objPanelDisplayLeft[iLoopCount];
objForm.SetSize(objPanel.Location.X, objPanel.Location.Y, objPanel.Width, objPanel.Height, false, false);
// 패널에 화면 붙임
SetFormDockStyle(objForm, objPanel);
m_objFormDisplayLeft[iLoopCount] = objForm;
}
}
// 디스플레이 화면 생성
{
m_iDisplayIndex = ( int )enumDisplayIndex.DISPLAY_FINAL;
m_objPanelDisplayRight = new Panel[m_iDisplayIndex];
m_objPanelDisplayRight[( int )enumDisplayIndex.OIRGINAL] = this.panelDisplayPosition24;
m_objPanelDisplayRight[( int )enumDisplayIndex.MEASURE_1] = this.panelDisplayMeasure21;
m_objPanelDisplayRight[( int )enumDisplayIndex.MEASURE_2] = this.panelDisplayMeasure22;
m_objPanelDisplayRight[( int )enumDisplayIndex.MEASURE_3] = this.panelDisplayMeasure23;
m_objPanelDisplayRight[( int )enumDisplayIndex.MEASURE_4] = this.panelDisplayMeasure24;
m_objPanelDisplayRight[( int )enumDisplayIndex.MEASURE_5] = this.panelDisplayMeasure25;
m_objPanelDisplayRight[( int )enumDisplayIndex.MEASURE_6] = this.panelDisplayMeasure26;
// 폼 디스플레이 생성
m_objFormDisplayRight = new Form[m_iDisplayIndex];
string[] strDisplayName = new string[m_objFormDisplayRight.Length];
strDisplayName[( int )enumDisplayIndex.OIRGINAL] = enumDisplayIndex.OIRGINAL.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_1] = enumDisplayIndex.MEASURE_1.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_2] = enumDisplayIndex.MEASURE_2.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_3] = enumDisplayIndex.MEASURE_3.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_4] = enumDisplayIndex.MEASURE_4.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_5] = enumDisplayIndex.MEASURE_5.ToString();
strDisplayName[( int )enumDisplayIndex.MEASURE_6] = enumDisplayIndex.MEASURE_6.ToString();
for (int iLoopCount = 0; iLoopCount < m_objFormDisplayRight.Length; iLoopCount++)
{
// 디스플레이 화면 생성 & 초기화
CFormDisplay objForm = new CFormDisplay();
int iImageIndex = 0;
if (( int )enumDisplayIndex.OIRGINAL == iLoopCount)
{
iImageIndex = iLoopCount;
}
else if (( int )enumDisplayIndex.MEASURE_1 <= iLoopCount)
{
iImageIndex = iLoopCount - ( int )enumDisplayIndex.MEASURE_1;
}
objForm.Initialize(( int )CDefine.enumCamera.CAMERA_1, string.Format("{0}", strDisplayName[iLoopCount]), false, iImageIndex);
objForm.SetDisplayIndex(iLoopCount);
objForm.Visible = true;
objForm.SetTimer(true);
// 사이즈 조정
Panel objPanel = m_objPanelDisplayRight[iLoopCount];
objForm.SetSize(objPanel.Location.X, objPanel.Location.Y, objPanel.Width, objPanel.Height, false, false);
// 패널에 화면 붙임
SetFormDockStyle(objForm, objPanel);
m_objFormDisplayRight[iLoopCount] = objForm;
}
}
bReturn = true;
} while(false);
return(bReturn);
}
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
//생성 :
//추가 :
//목적 : 이미지 갱신
//설명 :
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
private void UpdateDisplay(DataRow objDataRow)
{
do
{
try {
CDefine.structureReportImage objReportImage = new CDefine.structureReportImage();
if ("OK" == objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.RESULT].ToString())
{
objReportImage.bResult = true;
}
else
{
objReportImage.bResult = false;
}
CFormDisplay[] objFormDisplay = new CFormDisplay[m_objFormDisplayLeft.Length];
bool bInit = true;
for (int iLoopCount = 0; iLoopCount < m_objFormDisplayLeft.Length; iLoopCount++)
{
if ("21" == objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.POSITION].ToString())
{
objFormDisplay[iLoopCount] = m_objFormDisplayLeft[iLoopCount] as CFormDisplay;
}
else if ("23" == objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.POSITION].ToString())
{
objFormDisplay[iLoopCount] = m_objFormDisplayRight[iLoopCount] as CFormDisplay;
}
else
{
bInit = false;
break;
}
}
if (false == bInit)
{
break;
}
var pFormCommon = CFormCommon.GetFormCommon;
if (true == objReportImage.bResult)
{
if ("21" == objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.POSITION].ToString())
{
pFormCommon.SetButtonColor(this.BtnTitleCaseLeft, pFormCommon.COLOR_WHITE, pFormCommon.COLOR_GREEN);
}
else
{
pFormCommon.SetButtonColor(this.BtnTitleCaseRight, pFormCommon.COLOR_WHITE, pFormCommon.COLOR_GREEN);
}
}
else
{
if ("23" == objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.POSITION].ToString())
{
pFormCommon.SetButtonColor(this.BtnTitleCaseLeft, pFormCommon.COLOR_WHITE, pFormCommon.COLOR_RED);
}
else
{
pFormCommon.SetButtonColor(this.BtnTitleCaseRight, pFormCommon.COLOR_WHITE, pFormCommon.COLOR_RED);
}
}
objReportImage.strImagePath = objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.IMAGE_PATH].ToString();
objReportImage.dPatternPositionX = double.Parse(objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.PATTERN_POSITION_X].ToString());
objReportImage.dPatternPositionY = double.Parse(objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.PATTERN_POSITION_Y].ToString());
(objFormDisplay[( int )enumDisplayIndex.OIRGINAL] as CFormDisplay).UpdateDisplayHistory3D(objReportImage);
// 높이그랙픽 그리기..
CDefine.structureReportImage[] objReportImageLineResult = new CDefine.structureReportImage[CDefine.DEF_MAX_COUNT_CROP_REGION];
for (int iLoopCount = 0; iLoopCount < CDefine.DEF_MAX_COUNT_CROP_REGION; iLoopCount++)
{
objReportImageLineResult[iLoopCount] = new CDefine.structureReportImage();
objReportImageLineResult[iLoopCount].iFindLineCount = Int32.Parse(objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.MEASURE_LINE_FIND_COUNT].ToString());
objReportImageLineResult[iLoopCount].dStartX = double.Parse(objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.MEASURE_START_X_1 + (iLoopCount * 4)].ToString());
objReportImageLineResult[iLoopCount].dStartY = double.Parse(objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.MEASURE_START_Y_1 + (iLoopCount * 4)].ToString());
objReportImageLineResult[iLoopCount].dEndX = double.Parse(objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.MEASURE_END_X_1 + (iLoopCount * 4)].ToString());
objReportImageLineResult[iLoopCount].dEndY = double.Parse(objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.MEASURE_END_Y_1 + (iLoopCount * 4)].ToString());
objReportImageLineResult[iLoopCount].dLineDistance = double.Parse(objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.MEASURE_WIDTH_1 + (iLoopCount * 3)].ToString());
}
(objFormDisplay[( int )enumDisplayIndex.OIRGINAL] as CFormDisplay).SetDisplayMeasureHeight(objReportImageLineResult);
for (int iLoopCount = 0; iLoopCount < CDefine.DEF_MAX_COUNT_CROP_REGION; iLoopCount++)
{
objReportImage.bResult = "OK" == objDataRow.ItemArray[( int )CDatabaseDefine.enumHistoryAlign.MEASURE_RESULT_1 + (iLoopCount * 3)].ToString() ? true : false;
(objFormDisplay[( int )enumDisplayIndex.MEASURE_1 + iLoopCount] as CFormDisplay).UpdateDisplayHistory3DHeight(objReportImage);
}
} catch (Exception ex) {
Trace.WriteLine(ex.ToString());
}
} while(false);
}
public void UpdateDisplayResult(int iPosition)
{
var pDocument = CDocument.GetDocument;
var pFormCommon = CFormCommon.GetFormCommon;
do
{
CFormDisplay[] objFormDisplay = new CFormDisplay[m_objFormDisplayLeft.Length];
bool bInit = true;
for (int iLoopCount = 0; iLoopCount < m_objFormDisplayLeft.Length; iLoopCount++)
{
if (21 == iPosition)
{
objFormDisplay[iLoopCount] = m_objFormDisplayLeft[iLoopCount] as CFormDisplay;
}
else if (23 == iPosition)
{
objFormDisplay[iLoopCount] = m_objFormDisplayRight[iLoopCount] as CFormDisplay;
}
else
{
bInit = false;
break;
}
}
if (false == bInit)
{
break;
}
CInspectionResult.CResult objResult = pDocument.GetInspectionResultAlign(iPosition);
if (null == objFormDisplay)
{
break;
}
objFormDisplay[( int )enumDisplayIndex.OIRGINAL].BeginInvoke(objFormDisplay[( int )enumDisplayIndex.OIRGINAL].m_objDelegateUpdateDisplay3D, objResult);
// 여기서 결과 디스플레이를 뿌리자
for (int iLoopCount = 0; iLoopCount < CDefine.DEF_MAX_COUNT_CROP_REGION; iLoopCount++)
{
// if( 21 == iPosition )
// obj = m_objFormDisplayLeft[ ( int )enumDisplayIndex.MEASURE_1 + iLoopCount ] as CFormDisplay;
// else if( 23 == iPosition )
// obj = m_objFormDisplayRight[ ( int )enumDisplayIndex.MEASURE_1 + iLoopCount ] as CFormDisplay;
//obj.BeginInvoke( obj.m_objDelegateUpdateDisplayMeasure3D, objResult );
objFormDisplay[( int )enumDisplayIndex.MEASURE_1 + iLoopCount].BeginInvoke(objFormDisplay[( int )enumDisplayIndex.MEASURE_1 + iLoopCount].m_objDelegateUpdateDisplayMeasure3D, objResult);
}
if (CDefine.enumResult.RESULT_OK == objResult.objResultCommon.eResult)
{
if (21 == iPosition)
{
pFormCommon.SetButtonColor(this.BtnTitleCaseLeft, pFormCommon.COLOR_WHITE, pFormCommon.COLOR_GREEN);
}
else
{
pFormCommon.SetButtonColor(this.BtnTitleCaseRight, pFormCommon.COLOR_WHITE, pFormCommon.COLOR_GREEN);
}
}
else
{
if (21 == iPosition)
{
pFormCommon.SetButtonColor(this.BtnTitleCaseLeft, pFormCommon.COLOR_WHITE, pFormCommon.COLOR_RED);
}
else
{
pFormCommon.SetButtonColor(this.BtnTitleCaseRight, pFormCommon.COLOR_WHITE, pFormCommon.COLOR_RED);
}
}
} while(false);
}