/// <summary>
/// A Shapefile MultiPoint Shape
/// </summary>
/// <param name="recordNumber">The record number in the Shapefile</param>
/// <param name="metadata">Metadata about the shape</param>
/// <param name="dataRecord">IDataRecord associated with the metadata</param>
/// <param name="shapeData">The shape record as a byte array</param>
/// <exception cref="ArgumentNullException">Thrown if shapeData is null</exception>
/// <exception cref="InvalidOperationException">Thrown if an error occurs parsing shapeData</exception>
protected internal ShapeMultiPoint(int recordNumber, StringDictionary metadata, IDataRecord dataRecord, byte[] shapeData)
: base(ShapeType.MultiPoint, recordNumber, metadata, dataRecord)
{
// metadata is validated by the base class
if (shapeData == null)
{
throw new ArgumentNullException("shapeData");
}
// Note, shapeData includes an 8 byte header so positions below are +8
// Position Field Value Type Number Order
// Byte 0 Shape Type 8 Integer 1 Little
// Byte 4 Box Box Double 4 Little
// Byte 36 NumPoints Num Points Integer 1 Little
// Byte 40 Points Points Point NumPoints Little
// validation step 1 - must have at least 8 + 4 + (4*8) + 4 bytes = 48
if (shapeData.Length < 48)
{
throw new InvalidOperationException("Invalid shape data");
}
// extract bounding box and points
_boundingBox = ParseBoundingBox(shapeData, 12, ProvidedOrder.Little);
int numPoints = EndianBitConverter.ToInt32(shapeData, 44, ProvidedOrder.Little);
// validation step 2 - we're expecting 16 * numPoints + 48 bytes total
if (shapeData.Length != 48 + (16 * numPoints))
{
throw new InvalidOperationException("Invalid shape data");
}
// now extract the points
_points = new PointD[numPoints];
for (int pointNum = 0; pointNum < numPoints; pointNum++)
{
_points[pointNum] = new PointD(EndianBitConverter.ToDouble(shapeData, 48 + (16 * pointNum), ProvidedOrder.Little),
EndianBitConverter.ToDouble(shapeData, 56 + (16 * pointNum), ProvidedOrder.Little));
}
}
/// <summary>
/// A Shapefile Point Shape
/// </summary>
/// <param name="recordNumber">The record number in the Shapefile</param>
/// <param name="metadata">Metadata about the shape</param>
/// <param name="dataRecord">IDataRecord associated with the metadata</param>
/// <param name="shapeData">The shape record as a byte array</param>
/// <exception cref="ArgumentNullException">Thrown if shapeData is null</exception>
/// <exception cref="InvalidOperationException">Thrown if an error occurs parsing shapeData</exception>
protected internal ShapePoint(int recordNumber, StringDictionary metadata, IDataRecord dataRecord, byte[] shapeData)
: base(ShapeType.Point, recordNumber, metadata, dataRecord)
{
// metadata is validated by the base class
if (shapeData == null)
{
throw new ArgumentNullException("shapeData");
}
// Note, shapeData includes an 8 byte header so positions below are +8
// Position Field Value Type Number Order
// Byte 0 Shape Type 1 Integer 1 Little
// Byte 4 X X Double 1 Little
// Byte 12 Y Y Double 1 Little
// validation - shapedata should be 8 + 4 + 8 + 8 = 28 bytes long
if (shapeData.Length != 28)
{
throw new InvalidOperationException("Invalid shape data");
}
_point = new PointD(EndianBitConverter.ToDouble(shapeData, 12, ProvidedOrder.Little),
EndianBitConverter.ToDouble(shapeData, 20, ProvidedOrder.Little));
}
/// <summary>
/// Determines whether geo-loaction is in polygon specified by points.
/// </summary>
/// <param name="points">The points.</param>
/// <param name="lat">The latitude.</param>
/// <param name="lon">The longitude.</param>
/// <returns>
/// <c>true</c> if is in polygon specified by points; otherwise, <c>false</c>.
/// </returns>
private bool IsInPolygon(PointD[] points, double lat, double lon)
{
var j = points.Length - 1;
var inPoly = false;
for (int i = 0; i < points.Length; i++)
{
if ((points[i].X < lon && points[j].X >= lon) || (points[j].X < lon && points[i].X >= lon))
{
if (points[i].Y + (lon - points[i].X) / (points[j].X - points[i].X) * (points[j].Y - points[i].Y) < lat)
{
inPoly = !inPoly;
}
}
j = i;
}
return inPoly;
}
/// <summary>
/// Function is basically the same as Shape.ParsePolyLineOrPolygon, it is just
/// extended to handle the M extreme values
/// </summary>
/// <param name="shapeData">The shape record as a byte array</param>
/// <param name="boundingBox">Returns the bounding box</param>
/// <param name="parts">Returns the list of parts</param>
private void ParsePolyLineM(byte[] shapeData, out RectangleD boundingBox, out List <PointD[]> parts)
{
boundingBox = new RectangleD();
parts = null;
// metadata is validated by the base class
if (shapeData == null)
{
throw new ArgumentNullException("shapeData");
}
// Note, shapeData includes an 8 byte header so positions below are +8
// Position Field Value Type Number Order
// Byte 0 Shape Type 23 Integer 1 Little
// Byte 4 Box Box Double 4 Little
// Byte 36 NumParts NumParts Integer 1 Little
// Byte 40 NumPoints NumPoints Integer 1 Little
// Byte 44 Parts Parts Integer NumParts Little
// Byte X Points Points Point NumPoints Little
// Byte Y* Mmin Mmin Double 1 Little
// Byte Y + 8* Mmax Mmax Double 1 Little
// Byte Y + 16* Marray Marray Double NumPoints Little
//
// *optional
// validation step 1 - must have at least 8 + 4 + (4*8) + 4 + 4 bytes = 52
if (shapeData.Length < 44)
{
throw new InvalidOperationException("Invalid shape data");
}
// extract bounding box, number of parts and number of points
boundingBox = ParseBoundingBox(shapeData, 12, ProvidedOrder.Little);
int numParts = EndianBitConverter.ToInt32(shapeData, 44, ProvidedOrder.Little);
int numPoints = EndianBitConverter.ToInt32(shapeData, 48, ProvidedOrder.Little);
// validation step 2 - we're expecting 4 * numParts + (16 + 8 * numPoints for m extremes and values) + 16 * numPoints + 52 bytes total
if (shapeData.Length != 52 + (4 * numParts) + 16 + 8 * numPoints + (16 * numPoints))
{
throw new InvalidOperationException("Invalid shape data");
}
// now extract the parts
int partsOffset = 52 + (4 * numParts);
parts = new List <PointD[]>(numParts);
for (int part = 0; part < numParts; part++)
{
// this is the index of the start of the part in the points array
int startPart = (EndianBitConverter.ToInt32(shapeData, 52 + (4 * part), ProvidedOrder.Little) * 16) + partsOffset;
int numBytes;
if (part == numParts - 1)
{
// it's the last part so we go to the end of the point array
numBytes = shapeData.Length - startPart;
// remove bytes for M extreme block
numBytes -= numPoints * 8 + 16;
}
else
{
// we need to get the next part
int nextPart = (EndianBitConverter.ToInt32(shapeData, 52 + (4 * (part + 1)), ProvidedOrder.Little) * 16) + partsOffset;
numBytes = nextPart - startPart;
}
// the number of 16-byte points to read for this segment
int numPointsInPart = (numBytes) / 16;
PointD[] points = new PointD[numPointsInPart];
for (int point = 0; point < numPointsInPart; point++)
{
points[point] = new PointD(EndianBitConverter.ToDouble(shapeData, startPart + (16 * point), ProvidedOrder.Little),
EndianBitConverter.ToDouble(shapeData, startPart + 8 + (16 * point), ProvidedOrder.Little));
}
parts.Add(points);
}
// parse M information
Mmin = EndianBitConverter.ToDouble(shapeData, 52 + (4 * numParts) + (16 * numPoints), ProvidedOrder.Little);
Mmax = EndianBitConverter.ToDouble(shapeData, 52 + 8 + (4 * numParts) + (16 * numPoints), ProvidedOrder.Little);
M.Clear();
for (int i = 0; i < numPoints; i++)
{
double _m = EndianBitConverter.ToDouble(shapeData, 52 + 16 + (4 * numParts) + (16 * numPoints) + i * 8, ProvidedOrder.Little);
M.Add(_m);
}
}
/// <summary>
/// The PolygonZ shape share the same structure, this method parses the bounding box
/// and list of parts for both
/// </summary>
/// <param name="shapeData">The shape record as a byte array</param>
/// <param name="boundingBox">Returns the bounding box</param>
/// <param name="parts">Returns the list of parts</param>
protected void ParsePolygonZ(byte[] shapeData, out RectangleD boundingBox, out List<PointD[]> parts)
{
boundingBox = new RectangleD();
parts = null;
// metadata is validated by the base class
if (shapeData == null)
{
throw new ArgumentNullException("shapeData");
}
// Note, shapeData includes an 8 byte header so positions below are +8
// Position Field Value Type Number Order
// Byte 0 Shape Type 25 Integer 1 Little
// Byte 4 Box Box Double 4 Little
// Byte 36 NumParts NumParts Integer 1 Little
// Byte 40 NumPoints NumPoints Integer 1 Little
// Byte 44 Parts Parts Integer NumParts Little
// Byte X Points Points Point NumPoints Little
// Byte Y Zmin Zmin Double 1 Little
// Byte Y+8 Zmax Zmax Double 1 Little
// Byte Y+16 Zarray Zarray Double NumPoints Little
// Byte Z* Mmin Mmin Double 1 Little
// Byte Z+8* Mmax Mmax Double 1 Little
// Byte Z+16* Marray Marray Double NumPoints Little
// Byte M* Mmin Mmin Double 1 Little
// Byte Z+8* Mmax Mmax Double 1 Little
// Byte Z+16* Marray Marray Double NumPoints Little
//
// Note: X = 44 + (4 * NumParts), Y = X + (16 * NumPoints), Z = Y + 16 + (8 * NumPoints)
// * optional
// validation step 1 - must have at least 8 + 4 + (4*8) + 4 + 4 bytes = 52
if (shapeData.Length < 44)
{
throw new InvalidOperationException("Invalid shape data");
}
// extract bounding box, number of parts and number of points
boundingBox = ParseBoundingBox(shapeData, 12, ProvidedOrder.Little);
int numParts = EndianBitConverter.ToInt32(shapeData, 44, ProvidedOrder.Little);
int numPoints = EndianBitConverter.ToInt32(shapeData, 48, ProvidedOrder.Little);
// validation step 2 - we're expecting 4 * numParts + 16 * numPoints + 52 bytes total
if (shapeData.Length != 52 + (4 * numParts) + (16 * numPoints) &&
shapeData.Length != 52 + (4 * numParts) + (16 * numPoints) + 16 + (8 * numPoints) &&
shapeData.Length != 52 + (4 * numParts) + (16 * numPoints) + 16 + (8 * numPoints) + 16 + (8 * numPoints))
{
throw new InvalidOperationException("Invalid shape data");
}
// now extract the parts
int partsOffset = 52 + (4 * numParts);
parts = new List<PointD[]>(numParts);
for (int part = 0; part < numParts; part++)
{
// this is the index of the start of the part in the points array
int startPart = (EndianBitConverter.ToInt32(shapeData, 52 + (4 * part), ProvidedOrder.Little) * 16) + partsOffset;
int numBytes;
if (part == numParts - 1)
{
// it's the last part so we go to the end of the point array
numBytes = shapeData.Length - startPart;
}
else
{
// we need to get the next part
int nextPart = (EndianBitConverter.ToInt32(shapeData, 52 + (4 * (part + 1)), ProvidedOrder.Little) * 16) + partsOffset;
numBytes = nextPart - startPart;
}
// the number of 16-byte points to read for this segment
int numPointsInPart = Math.Min(numBytes / 16, numPoints);
PointD[] points = new PointD[numPointsInPart];
for (int point = 0; point < numPointsInPart; point++)
{
points[point] = new PointD(EndianBitConverter.ToDouble(shapeData, startPart + (16 * point), ProvidedOrder.Little),
EndianBitConverter.ToDouble(shapeData, startPart + 8 + (16 * point), ProvidedOrder.Little));
}
parts.Add(points);
}
}