//Method Name: AssignValues
//Objectives: It gets the data from the ReadFile method and decides on which variables get values and which solvers are used or methods are called depending on these values
//Inputs: a string to indicate file_name
//Outputs: a variabe of type "SimulatorData" that contains the data read from the file in a form suitable for the use of the simulator
public static SimulatorData ReadData(string file_name)
{
//a dictionary to store the data read from the file in a key-value pairs format
Dictionary <string, string> dictionary = ReadFile(file_name + ".txt");
SimulatorData simulator_data = new SimulatorData();
if (dictionary.Count > 0)
{
// Chek if the input data file exists and it succefully was loaded.
simulator_data.successfully_loaded_data = true;
// Sets the file name.
simulator_data.file_name = file_name;
// This variable stores the size of the grid according to the numbering system used "active-blocks only, or all blocks".
int size = 0;
String key;
#region Run Specs
key = "natural_ordering";
if (dictionary.ContainsKey(key))
{
if (dictionary[key] == "all_blocks")
{
simulator_data.natural_ordering = SimulatorData.NaturalOrdering.All_Blocks;
}
else if (dictionary[key] == "active_only")
{
simulator_data.natural_ordering = SimulatorData.NaturalOrdering.Active_Only;
}
}
key = "single_phase_compressibility";
if (dictionary.ContainsKey(key))
{
if (dictionary[key] == "incompressible")
{
simulator_data.compressibility = TypeDefinitions.Compressibility.Incompressible;
}
else if (dictionary[key] == "slightly_compressible")
{
simulator_data.compressibility = TypeDefinitions.Compressibility.Slightly_Compressible;
}
else if (dictionary[key] == "compressible")
{
simulator_data.compressibility = TypeDefinitions.Compressibility.Compressible;
}
}
key = "grid_type";
if (dictionary.ContainsKey(key))
{
if (dictionary[key] == "rectangular")
{
simulator_data.grid_type = Transmissibility.GridType.Rectangular;
}
else if (dictionary[key] == "cylindrical")
{
simulator_data.grid_type = Transmissibility.GridType.Cylindrical;
}
}
key = "delta_t";
if (dictionary.ContainsKey(key))
{
simulator_data.delta_t = double.Parse(dictionary[key]);
}
key = "time_max";
if (dictionary.ContainsKey(key))
{
simulator_data.time_max = double.Parse(dictionary[key]);
}
key = "convergence_pressure";
if (dictionary.ContainsKey(key))
{
simulator_data.convergence_pressure = double.Parse(dictionary[key]);
}
#endregion
#region Output
key = "what";
if (dictionary.ContainsKey(key))
{
simulator_data.what = dictionary[key].Split(',');
}
key = "where";
if (dictionary.ContainsKey(key))
{
string temp = dictionary[key];
simulator_data.where = temp == "console" ? SinglePhase.OutPut2D.Where.Console : SinglePhase.OutPut2D.Where.File;
}
key = "formatted";
if (dictionary.ContainsKey(key))
{
string temp = dictionary[key];
simulator_data.formatted = temp == "yes" ? true : false;
}
key = "single_file";
if (dictionary.ContainsKey(key))
{
string temp = dictionary[key];
simulator_data.single_file = temp == "yes" ? true : false;
}
#endregion
#region Grid
// For a rectangular grid
if (simulator_data.grid_type == Transmissibility.GridType.Rectangular)
{
key = "homogeneous";
if (dictionary.ContainsKey(key))
{
if (dictionary[key] == "yes")
{
simulator_data.homogeneous = true;
}
else
{
simulator_data.homogeneous = false;
}
}
key = "inactive_blocks";
if (dictionary.ContainsKey(key))
{
simulator_data.inactive_blocks = getArrayFromDictionary_int(dictionary[key]);
}
else
{
simulator_data.inactive_blocks = new int[0];
}
key = "grid_dimensions";
if (dictionary.ContainsKey(key))
{
string[] grid_dimensions = dictionary[key].Split(',');
simulator_data.x = int.Parse(grid_dimensions[0]); simulator_data.y = int.Parse(grid_dimensions[1]); simulator_data.z = int.Parse(grid_dimensions[2]);
}
// Set the size of the grid according to the numbering system used "active-blocks only, or all blocks"
if (simulator_data.natural_ordering == SimulatorData.NaturalOrdering.All_Blocks)
{
size = simulator_data.x * simulator_data.y * simulator_data.z;
}
else
{
size = simulator_data.x * simulator_data.y * simulator_data.z - simulator_data.inactive_blocks.Length;
}
//////////////////////////////////////////////////////////////////
//Block dimensions
if (simulator_data.homogeneous == true)
{
simulator_data.delta_X = int.Parse(dictionary["delta_x"]);
simulator_data.delta_Y = int.Parse(dictionary["delta_y"]);
simulator_data.delta_Z = int.Parse(dictionary["delta_z"]);
key = "depth_top";
if (dictionary.ContainsKey(key))
{
simulator_data.depth_top = double.Parse(dictionary["depth_top"]);
}
}
else
{
//Delta x values
simulator_data.delta_X_array = getArrayFromDictionary_int(dictionary["delta_x"]);
//Delta y values
simulator_data.delta_Y_array = getArrayFromDictionary_int(dictionary["delta_y"]);
//Heights values
simulator_data.delta_Z_array = getArrayFromDictionary_int(dictionary["delta_z"]);
key = "depth_top";
if (dictionary.ContainsKey(key))
{
simulator_data.depth_top_array = getArrayFromDictionary_double(dictionary[key]);
}
else
{
simulator_data.depth_top_array = new double[size];
}
}
}
// For a cylindrical grid
// Single-well simulations. Always homogeneous rock properties. No in-active blocks
else
{
}
#endregion
#region Rock Properties
if (simulator_data.homogeneous)
{
if (dictionary.ContainsKey("Kz"))
{
//
simulator_data.Kz_data = double.Parse(dictionary["Kz"]);
}
simulator_data.Kx_data = double.Parse(dictionary["Kx"]);
simulator_data.Ky_data = double.Parse(dictionary["Ky"]);
simulator_data.porosity = double.Parse(dictionary["porosity"]);
//Rock Compressiblity
key = "compressibility_rock";
if (dictionary.ContainsKey(key))
{
simulator_data.compressibility_rock = double.Parse(dictionary["compressibility_rock"]);
}
}
else
{
//Kx values
simulator_data.Kx_data_array = getArrayFromDictionary_double(dictionary["Kx"]);
//Ky values
simulator_data.Ky_data_array = getArrayFromDictionary_double(dictionary["Ky"]);
//Kz values
if (dictionary.ContainsKey("Kz"))
{
simulator_data.Kz_data_array = getArrayFromDictionary_double(dictionary["Kz"]);
}
else
{
simulator_data.Kz_data_array = new double[size];
}
//Porosity values
simulator_data.porosity_array = getArrayFromDictionary_double(dictionary["porosity"]);
//Rock Compressiblity
key = "compressibility_rock";
if (dictionary.ContainsKey(key))
{
simulator_data.compressibility_rock = double.Parse(dictionary["compressibility_rock"]);
}
}
#endregion
#region PVT
key = "FVF";
if (dictionary.ContainsKey(key))
{
simulator_data.FVF = double.Parse(dictionary[key]);
}
key = "density";
if (dictionary.ContainsKey(key))
{
simulator_data.density = double.Parse(dictionary[key]);
}
key = "molecular_weight";
if (dictionary.ContainsKey(key))
{
simulator_data.molecular_weight = double.Parse(dictionary[key]);
}
key = "temperature";
if (dictionary.ContainsKey(key))
{
simulator_data.temperature = double.Parse(dictionary[key]);
}
key = "viscosity";
if (simulator_data.compressibility == TypeDefinitions.Compressibility.Incompressible)
{
if (dictionary.ContainsKey(key))
{
simulator_data.viscosity = double.Parse(dictionary[key]);
}
}
else
{
if (dictionary[key].Contains(','))
{
double[][] temp = getTwoColumns(dictionary[key]);
simulator_data.water_data[0] = temp[0];
simulator_data.water_data[2] = temp[1];
}
else
{
simulator_data.viscosity = double.Parse(dictionary[key]);
}
}
key = "compressibility_fluid";
if (dictionary.ContainsKey(key))
{
simulator_data.compressibility_fluid = double.Parse(dictionary[key]);
}
key = "g_data_pressure";
if (dictionary.ContainsKey(key))
{
////pressure
//simulator_data.g_data[0] = getArrayFromDictionary_double(dictionary, "g_data_pressure");
////FVF
//simulator_data.g_data[1] = getArrayFromDictionary_double(dictionary, "g_data_FVF");
////Viscosity
//simulator_data.g_data[2] = getArrayFromDictionary_double(dictionary, "g_data_viscosity");
////Density
//simulator_data.g_data[3] = getArrayFromDictionary_double(dictionary, "g_data_density");
}
#endregion
#region Boundary Conditions
key = "initial_pressure";
if (dictionary.ContainsKey(key))
{
simulator_data.initial_pressure = double.Parse(dictionary[key]);
}
key = "boundary_flow_rate";
if (dictionary.ContainsKey(key))
{
simulator_data.boundary_flow_rate = getArrayFromDictionary_double(dictionary[key]);
}
else
{
simulator_data.boundary_flow_rate = new double[size];
}
key = "boundary_pressure_x";
if (dictionary.ContainsKey(key))
{
simulator_data.boundary_pressure_x = getArrayFromDictionary_double(dictionary[key]);
}
else
{
simulator_data.boundary_pressure_x = new double[size];
}
key = "boundary_pressure_y";
if (dictionary.ContainsKey(key))
{
simulator_data.boundary_pressure_y = getArrayFromDictionary_double(dictionary[key]);
}
else
{
simulator_data.boundary_pressure_y = new double[size];
}
key = "boundary_pressure_gradient_x";
if (dictionary.ContainsKey(key))
{
simulator_data.boundary_pressure_gradient_x = getArrayFromDictionary_double(dictionary[key]);
}
else
{
simulator_data.boundary_pressure_gradient_x = new double[size];
}
key = "boundary_pressure_gradient_y";
if (dictionary.ContainsKey(key))
{
simulator_data.boundary_pressure_gradient_y = getArrayFromDictionary_double(dictionary[key]);
}
else
{
simulator_data.boundary_pressure_gradient_y = new double[size];
}
#endregion
#region Well Data
key = "well_locations";
if (dictionary.ContainsKey(key))
{
simulator_data.well_locations = getArrayFromDictionary_int(dictionary[key]);
}
int number_of_wells = simulator_data.well_locations.Length;
simulator_data.well_array = new Well[size];
for (int i = 1; i <= number_of_wells; i++)
{
Well well = new Well();
double[] well_data = getArrayFromDictionary_double(dictionary["well_" + i]);
well.rw = well_data[0]; well.skin = well_data[1]; well.specified_BHP = well_data[2]; well.specified_flow_rate = well_data[3];
well.type_calculation = well_data[4] == 0 ? Well.TypeCalculation.Specified_BHP : Well.TypeCalculation.Specified_Flow_Rate;
int location = simulator_data.well_locations[i - 1];
simulator_data.well_array[location] = well;
}
#endregion
}
return(simulator_data);
}
//Method Name: initializeSimulationSinglePhase
//Objectives: reads the data from the data object passed to it and assign the values to the blocks after constructing the grid and starting the solver
//Inputs: a variable of type "SimulatorData" that contains all the simulation data read from the data input file
//Outpits: N/A
public static void initializeSimulationSinglePhase(SimulatorData data)
{
#region Initialize Rectangular grid dimensions
bool homogeneous = data.homogeneous;
int x = data.x, y = data.y, z = data.z;
int[] inactive_blocks = data.inactive_blocks;
//creates an array for the grid x, y and z dimensions
int[] grid_dimensions = new int[] { x, y, z };
//calculates the size of the entire grid "including both active and non-active blocks"
int size = x * y * z;
//calculates the size of the active-blocks only
int size_active = x * y * z - inactive_blocks.Length;
//use this if the natural ordering excludes inactive blocks
if (data.natural_ordering == SimulatorData.NaturalOrdering.Active_Only)
{
size = size_active;
}
GridBlock[] grid;
#endregion
#region Initialize grid data
//The gridding technique used here is for only a single row or a single column
int[] delta_X = new int[x];
int[] delta_Y = new int[y];
int[] delta_Z = new int[size];
double[] depth_top_array = new double[size];
double depth_top;
//Homogeneous grid sizing
if (homogeneous)
{
for (int i = 0; i < x; i++)
{
delta_X[i] = data.delta_X;
}
for (int i = 0; i < y; i++)
{
delta_Y[i] = data.delta_Y;
}
for (int i = 0; i < size; i++)
{
delta_Z[i] = data.delta_Z;
}
}
//Heterogeneous grid sizing
else
{
delta_X = data.delta_X_array;
delta_Y = data.delta_Y_array;
delta_Z = data.delta_Z_array;
depth_top_array = data.depth_top_array;
}
#endregion
#region Initialize Rock properties
//The gridding technique used here is for the whole grid
double[] Kx_data = new double[size];
double[] Ky_data = new double[size];
double[] Kz_data = new double[size];
double[] porosity = new double[size];
double compressibility_rock = 0;
//Homogeneous grid
if (homogeneous)
{
for (int i = 0; i < size; i++)
{
Kx_data[i] = data.Kx_data;
Ky_data[i] = data.Ky_data;
Kz_data[i] = data.Kz_data;
porosity[i] = data.porosity;
compressibility_rock = data.compressibility_rock;
}
}
//Heterogeneous grid
else
{
Kx_data = data.Kx_data_array;
Ky_data = data.Ky_data_array;
Kz_data = data.Kz_data_array;
porosity = data.porosity_array;
compressibility_rock = data.compressibility_rock;
}
#endregion
#region Initialize PVT
double FVF = data.FVF;
double viscosity = data.viscosity;
double density = data.density;
double molecular_weight = data.molecular_weight;
double temperature = data.temperature;
PVT pvt = new PVT(us_w_d: data.water_data);
//For slightly-compressibly fluid
double compressibility_fluid = data.compressibility_fluid;
//For compressible fluid, this data is used for constructing the PVT table
double[][] g_data = data.g_data;
//PVT pvt = new PVT(g_data: g_data);
#endregion
#region Initialize boundary conditions
double initial_pressure = data.initial_pressure;
double[] boundary_flow_rate = data.boundary_flow_rate;
double[] boundary_pressure_x = data.boundary_pressure_x;
double[] boundary_pressure_y = data.boundary_pressure_y;
double[] boundary_pressure_gradient_x = data.boundary_pressure_gradient_x;
double[] boundary_pressure_gradient_y = data.boundary_pressure_gradient_y;
#endregion
#region Initialize wells data
Well[] wells = data.well_array;
Well well;
#endregion
#region run specifications
TypeDefinitions.Compressibility compressibility = data.compressibility;
var phase = Transmissibility.Phase.Water;
var grid_type = data.grid_type;
//For compressible and slightly-compressible fluids, define the values for time steps and total simulation time
double delta_t = data.delta_t;
double time_max = data.time_max;
//For compressible fluid problems
double convergence_pressure = data.convergence_pressure;
#endregion
#region Initialize grid
//#########################################################################################
//Assign neighbouring blocks "according to the natural ordering procedure"
//set numbering scheme
var numbering_scheme = RectangularBlockNumbering.NumberingScheme.Active_Only;
//contruct the grid
grid = RectangularBlockNumbering.assignGridOrdering(grid_dimensions, inactive_blocks, numbering_scheme);
GridBlock block;
//assign properties to each block in the grid
for (int counter = 0; counter < grid.Length; counter++)
{
block = grid[counter];
//#########################################################################################
//Assign PVT and rock properties
block.delta_x = delta_X[block.x]; block.delta_y = delta_Y[block.y]; block.h = delta_Z[counter];
block.depth = depth_top_array[counter] + block.h * 0.5;
block.bulk_volume = block.delta_x * block.delta_y * block.h;
block.Kx = Kx_data[counter]; block.Ky = Ky_data[counter]; block.Kz = Kz_data[counter];
//To-Do: initialize pressure through hydraulic equilibrium
block.pressure = initial_pressure;
if (compressibility == TypeDefinitions.Compressibility.Compressible)
{
block.water_viscosity = pvt.getWaterViscosity(initial_pressure);
//For a single phase fluid, saturation and relative permeabilities of the fluid is equal to unity
block.So = 0; block.Sg = 0; block.Sw = 1;
block.Kro = 0; block.Krg = 0; block.Krw = 1;
//For slightly compressible fluids, the values of rock compressibility "Cf" and fluid compressibility C_fluid are used to estimate the new values
block.Cf = compressibility_rock; block.C = compressibility_fluid;
const double a = 5.614583;
double FVF_constants = 14.7 / (60 + 460) * (190 + 460) / 1;
double z_factor = PVT.calculateZ(738.44, 418.38, initial_pressure, 190, 1);
block.Bw = FVF_constants * z_factor / initial_pressure;
density = PVT.calculateGasDensity(initial_pressure, molecular_weight, z_factor, temperature);
block.water_density = density * gamma_c * gravity_c;
block.porosity = Vp_Calculator.chord_slope_Vp(compressibility_rock, porosity[counter], block.pressure, initial_pressure);
}
else if (compressibility == TypeDefinitions.Compressibility.Slightly_Compressible)
{
//For slightly compressibly fluids, viscosity is independent of pressure
if (viscosity > 0)
{
block.water_viscosity = viscosity;
}
else
{
block.water_viscosity = pvt.getWaterViscosity(initial_pressure);
}
//For a single phase fluid, saturation and relative permeabilities of the fluid is equal to unity
block.So = 0; block.Sg = 0; block.Sw = 1;
block.Kro = 0; block.Krg = 0; block.Krw = 1;
//For slightly compressible fluids, the values of rock compressibility "Cf" and fluid compressibility C_fluid are used to estimate the new values
block.Cf = compressibility_rock; block.C = compressibility_fluid;
block.Bw = PVT.chord_slope_FVF(compressibility_fluid, 14.7);
block.water_density = density * gamma_c * gravity_c;
block.porosity = Vp_Calculator.chord_slope_Vp(compressibility_rock, porosity[counter], block.pressure, initial_pressure);
}
else
{
block.water_viscosity = viscosity; block.Bw = FVF; block.water_density = density * gamma_c * gravity_c;
block.porosity = porosity[counter];
block.So = 0; block.Sg = 0; block.Sw = 1;
block.Kro = 0; block.Krg = 0; block.Krw = 1;
}
//#########################################################################################
//Calculate geometric factors "the part of the transmissibility that is always constant" only once in the initialization process
var direction_x = Transmissibility.Direction.x;
var direction_y = Transmissibility.Direction.y;
if (homogeneous)
{
block.GF_x = Transmissibility.getGeometricFactor(block, grid_type, direction_x);
block.GF_y = Transmissibility.getGeometricFactor(block, grid_type, direction_y);
}
//#########################################################################################
//Set boundary conditions
double boundary_transmissibility = 0;
block.boundary_flow_rate = boundary_flow_rate[counter];
if (boundary_pressure_x[counter] != 0)
{
boundary_transmissibility = Transmissibility.getBoundaryTransmissibility(block, grid_type, direction_x, phase);
block.boundary_pressure = boundary_pressure_x[counter];
block.boundary_pressure_times_transmissibility = boundary_transmissibility * boundary_pressure_x[counter];
block.boundary_transmissibility = boundary_transmissibility;
}
else if (boundary_pressure_y[counter] != 0)
{
boundary_transmissibility = Transmissibility.getBoundaryTransmissibility(block, grid_type, direction_y, phase);
block.boundary_pressure = boundary_pressure_y[counter];
block.boundary_pressure_times_transmissibility = boundary_transmissibility * boundary_pressure_y[counter];
block.boundary_transmissibility = boundary_transmissibility;
}
//boundary pressure gradient is positive for depletion and negative for encroachment
boundary_transmissibility = Transmissibility.getBoundaryTransmissibility(block, grid_type, direction_x, phase);
block.boundary_pressure_gradient += boundary_pressure_gradient_x[counter] * block.delta_x / 2 * boundary_transmissibility;
boundary_transmissibility = Transmissibility.getBoundaryTransmissibility(block, grid_type, direction_y, phase);
block.boundary_pressure_gradient += boundary_pressure_gradient_y[counter] * block.delta_y / 2 * boundary_transmissibility;
//#########################################################################################
//Set well rates
if (wells[counter] != null)
{
well = wells[counter];
block.type = GridBlock.Type.Well;
//specified flow rate wells
if (well.type_calculation == Well.TypeCalculation.Specified_Flow_Rate)
{
block.well_type = GridBlock.WellType.Specified_Flow_Rate;
block.well_flow_rate = well.specified_flow_rate;
block.specified_BHP = well.specified_BHP;
block.skin = well.skin;
block.rw = well.rw;
double well_geometric_factor = Well.getGeometricFactor(block);
block.well_geometric_factor = well_geometric_factor;
block.well_transmissibility = Well.getTransmissibility(block, well_geometric_factor, Well.Phase.Water);
}
//specified BHP wells
else
{
block.well_type = GridBlock.WellType.Specified_BHP;
block.BHP = well.specified_BHP;
block.rw = well.rw;
block.skin = well.skin;
double well_geometric_factor = Well.getGeometricFactor(block);
block.well_geometric_factor = well_geometric_factor;
block.well_transmissibility = Well.getTransmissibility(block, well_geometric_factor, Well.Phase.Water);
}
}
}
#region calculate the geometric factors of a heterogeneous grid
if (!homogeneous)
{
var direction_x = Transmissibility.Direction.x;
var direction_y = Transmissibility.Direction.y;
int x_counter = 0;
int y_counter = 0;
//int z_counter = 0;
for (int i = 0; i < grid.Length; i++)
{
block = grid[i];
if (x > 1)
{
x_counter = block.east_counter != -1 ? block.east_counter : block.west_counter;
block.GF_x = x_counter != -1 ? Transmissibility.getGeometricFactor(block, grid[x_counter], grid_type, direction_x) : 0;
}
if (y > 1)
{
y_counter = block.north_counter != -1 ? block.north_counter : block.south_counter;
block.GF_y = y_counter != -1 ? Transmissibility.getGeometricFactor(block, grid[y_counter], grid_type, direction_y) : 0;
}
}
}
#endregion
#endregion
#region Output
SinglePhase.OutPut2D output = new SinglePhase.OutPut2D(grid, grid_dimensions, data.what, data.where, compressibility, data.file_name, data.formatted, data.single_file, inactive_blocks);
#endregion
#region Choose Solver
if (compressibility == TypeDefinitions.Compressibility.Incompressible)
{
SolverSinglePhase.incompressible(grid, output);
}
else if (compressibility == TypeDefinitions.Compressibility.Slightly_Compressible)
{
SolverSinglePhase.slightly_compressible(grid, delta_t, time_max, output, pvt);
}
else
{
SolverSinglePhase.compressible(grid, delta_t, time_max, convergence_pressure, output, pvt);
}
#endregion
}
