public override void InitPhysics()
{
int i;
shootBoxInitialSpeed = 4000;
// collision configuration contains default setup for memory, collision setup
CollisionConf = new DefaultCollisionConfiguration();
Dispatcher = new CollisionDispatcher(CollisionConf);
Dispatcher.RegisterCollisionCreateFunc(BroadphaseNativeType.BoxShape, BroadphaseNativeType.BoxShape,
CollisionConf.GetCollisionAlgorithmCreateFunc(BroadphaseNativeType.ConvexShape, BroadphaseNativeType.ConvexShape));
Broadphase = new DbvtBroadphase();
// the default constraint solver.
Solver = new SequentialImpulseConstraintSolver();
World = new DiscreteDynamicsWorld(Dispatcher, Broadphase, Solver, CollisionConf);
World.SolverInfo.SplitImpulse = 1;
World.SolverInfo.NumIterations = 20;
World.DispatchInfo.UseContinuous = ccdMode;
World.Gravity = new Vector3(0, -10, 0);
BoxShape ground = new BoxShape(200, 1, 200);
// ground.InitializePolyhedralFeatures();
CollisionShapes.Add(ground);
RigidBody body = LocalCreateRigidBody(0, Matrix.Identity, ground);
body.UserObject = "Ground";
CollisionShape shape = new CylinderShape(CubeHalfExtents, CubeHalfExtents, CubeHalfExtents);
CollisionShapes.Add(shape);
int numObjects = 120;
for (i = 0; i < numObjects; i++)
{
//stack them
int colsize = 10;
int row = (int)((i * CubeHalfExtents * 2) / (colsize * 2 * CubeHalfExtents));
int row2 = row;
int col = (i) % (colsize) - colsize / 2;
if (col > 3)
{
col = 11;
row2 |= 1;
}
Matrix trans = Matrix.Translation(col * 2 * CubeHalfExtents + (row2 % 2) * CubeHalfExtents,
row * 2 * CubeHalfExtents + CubeHalfExtents + ExtraHeight, 0);
body = LocalCreateRigidBody(1, trans, shape);
if (ccdMode)
{
body.CcdMotionThreshold = CubeHalfExtents;
body.CcdSweptSphereRadius = 0.9f * CubeHalfExtents;
}
}
}
protected override void OnInitializePhysics()
{
// collision configuration contains default setup for memory, collision setup
CollisionConf = new DefaultCollisionConfiguration();
// Use the default collision dispatcher. For parallel processing you can use a diffent dispatcher.
Dispatcher = new CollisionDispatcher(CollisionConf);
VoronoiSimplexSolver simplex = new VoronoiSimplexSolver();
MinkowskiPenetrationDepthSolver pdSolver = new MinkowskiPenetrationDepthSolver();
Convex2DConvex2DAlgorithm.CreateFunc convexAlgo2d = new Convex2DConvex2DAlgorithm.CreateFunc(simplex, pdSolver);
Dispatcher.RegisterCollisionCreateFunc(BroadphaseNativeType.Convex2DShape, BroadphaseNativeType.Convex2DShape, convexAlgo2d);
Dispatcher.RegisterCollisionCreateFunc(BroadphaseNativeType.Box2DShape, BroadphaseNativeType.Convex2DShape, convexAlgo2d);
Dispatcher.RegisterCollisionCreateFunc(BroadphaseNativeType.Convex2DShape, BroadphaseNativeType.Box2DShape, convexAlgo2d);
Dispatcher.RegisterCollisionCreateFunc(BroadphaseNativeType.Box2DShape, BroadphaseNativeType.Box2DShape, new Box2DBox2DCollisionAlgorithm.CreateFunc());
Broadphase = new DbvtBroadphase();
// the default constraint solver.
Solver = new SequentialImpulseConstraintSolver();
World = new DiscreteDynamicsWorld(Dispatcher, Broadphase, Solver, CollisionConf);
World.Gravity = new Vector3(0, -10, 0);
// create a few basic rigid bodies
CollisionShape groundShape = new BoxShape(150, 7, 150);
CollisionShapes.Add(groundShape);
RigidBody ground = LocalCreateRigidBody(0, Matrix.Identity, groundShape);
ground.UserObject = "Ground";
// create a few dynamic rigidbodies
// Re-using the same collision is better for memory usage and performance
float u = 0.96f;
Vector3[] points = { new Vector3(0, u, 0), new Vector3(-u, -u, 0), new Vector3(u, -u, 0) };
ConvexShape childShape0 = new BoxShape(1, 1, Depth);
ConvexShape colShape = new Convex2DShape(childShape0);
ConvexShape childShape1 = new ConvexHullShape(points);
ConvexShape colShape2 = new Convex2DShape(childShape1);
ConvexShape childShape2 = new CylinderShapeZ(1, 1, Depth);
ConvexShape colShape3 = new Convex2DShape(childShape2);
CollisionShapes.Add(colShape);
CollisionShapes.Add(colShape2);
CollisionShapes.Add(colShape3);
CollisionShapes.Add(childShape0);
CollisionShapes.Add(childShape1);
CollisionShapes.Add(childShape2);
colShape.Margin = 0.03f;
float mass = 1.0f;
Vector3 localInertia = colShape.CalculateLocalInertia(mass);
Matrix startTransform;
Vector3 x = new Vector3(-ArraySizeX, 8, -20);
Vector3 y = Vector3.Zero;
Vector3 deltaX = new Vector3(1, 2, 0);
Vector3 deltaY = new Vector3(2, 0, 0);
int i, j;
for (i = 0; i < ArraySizeY; i++)
{
y = x;
for (j = 0; j < ArraySizeX; j++)
{
startTransform = Matrix.Translation(y - new Vector3(-10, 0, 0));
//using motionstate is recommended, it provides interpolation capabilities, and only synchronizes 'active' objects
DefaultMotionState myMotionState = new DefaultMotionState(startTransform);
RigidBodyConstructionInfo rbInfo;
switch (j % 3)
{
case 0:
rbInfo = new RigidBodyConstructionInfo(mass, myMotionState, colShape, localInertia);
break;
case 1:
rbInfo = new RigidBodyConstructionInfo(mass, myMotionState, colShape3, localInertia);
break;
default:
rbInfo = new RigidBodyConstructionInfo(mass, myMotionState, colShape2, localInertia);
break;
}
RigidBody body = new RigidBody(rbInfo);
rbInfo.Dispose();
//body.ActivationState = ActivationState.IslandSleeping;
body.LinearFactor = new Vector3(1, 1, 0);
body.AngularFactor = new Vector3(0, 0, 1);
World.AddRigidBody(body);
y += deltaY;
}
x += deltaX;
}
}
/// <summary>
/// Creates the world
/// </summary>
void CreateWorld(string levelName)
{
Launch.Log("[PhysicsMain] Creating new world...");
// have to make more of these every level because disposing the world apparently disposes of them too.
broadphase = new DbvtBroadphase();
solver = new SequentialImpulseConstraintSolver();
dcc = new DefaultCollisionConfiguration();
dispatcher = new CollisionDispatcher(dcc);
// set up this stuff... not quite sure what it's for, but you need it if you want the CCD to work for the karts
dispatcher.RegisterCollisionCreateFunc(BroadphaseNativeType.ConvexHullShape, BroadphaseNativeType.ConvexHullShape,
dcc.GetCollisionAlgorithmCreateFunc(BroadphaseNativeType.TriangleMeshShape, BroadphaseNativeType.TriangleMeshShape));
dispatcher.RegisterCollisionCreateFunc(BroadphaseNativeType.ConvexHullShape, BroadphaseNativeType.ConvexHullShape,
dcc.GetCollisionAlgorithmCreateFunc(BroadphaseNativeType.ConvexHullShape, BroadphaseNativeType.ConvexHullShape));
world = new DiscreteDynamicsWorld(dispatcher, broadphase, solver, dcc);
// and then turn on CCD
world.DispatchInfo.UseContinuous = true;
world.Gravity = new Vector3(0, Settings.Default.Gravity, 0);
ManifoldPoint.ContactAddedCallback = ContactAdded;
}
