BbLocalPlacement3D(
BbLocalPlacement3D placementRelTo, BbPosition3D relativePlacement)
{
if (placementRelTo != null && relativePlacement != null)
{
IfcLocalPlacement = new IfcLocalPlacement
{
PlacementRelTo = placementRelTo.IfcLocalPlacement,
RelativePlacement = new IfcAxis2Placement
{
Value = relativePlacement.IfcAxis2Placement3D,
},
};
}
else if (placementRelTo == null && relativePlacement != null)
{
IfcLocalPlacement = new IfcLocalPlacement
{
RelativePlacement = new IfcAxis2Placement
{
Value = relativePlacement.IfcAxis2Placement3D,
},
};
}
else
{
IfcLocalPlacement = new IfcLocalPlacement
{
RelativePlacement = new IfcAxis2Placement
{
Value = BbHeaderSetting.Setting3D.DefaultBbPosition3D.IfcAxis2Placement3D,
},
};
}
}
public BbExtrudedGeometry(
BbProfile profile,
BbPosition3D position3D,
BbDirection3D direction3D,
double depth
)
{
_ifcExtrudedAreaSolid = new IfcExtrudedAreaSolid{
SweptArea = profile.IfcProfileDef,
Position = position3D.IfcAxis2Placement3D,
ExtrudedDirection = direction3D.IfcDirection,
Depth = depth,
};
_ifcShapeRepresentation = new IfcShapeRepresentation
{
ContextOfItems = BbHeaderSetting.Setting3D.GeometricRepresentationContext,
RepresentationIdentifier = "Body",
RepresentationType = "SweptSolid",
Items = new List<IfcRepresentationItem>(),
};
_ifcShapeRepresentation.Items.Add(_ifcExtrudedAreaSolid);
_ifcProductDefinitionShape = new IfcProductDefinitionShape
{
// Name=
// Description =
Representations = new List<IfcRepresentation>(),
};
_ifcProductDefinitionShape.Representations.Add(_ifcShapeRepresentation);
}
BbBrepElement(
string name,
BbBRepGeometry brepGeometry,
BbCoordinate3D position,
BbDirection3D zAxis,
BbDirection3D xAxis,
BbLocalPlacement3D containerLocation,
IfcOwnerHistory ownerHistory,
Type IfcEntityType)
{
Name = name;
//Profile = profile;
BbPosition3D pos = BbPosition3D.Create(position, zAxis, xAxis);
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
containerLocation, pos);
// ifcBuildingElement = Activator.CreateInstance(EbConstants.Part21NSName, EbConstants.Part21NSName + "." + ifcEntityName);
ifcElement = Activator.CreateInstance(IfcEntityType) as IfcElement;
ifcElement.GlobalId = IfcGloballyUniqueId.NewGuid();
ifcElement.OwnerHistory = ownerHistory;
ifcElement.Name = Name;
//ObjectType = ,
ifcElement.ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement;
ifcElement.Representation = brepGeometry.IfcProductDefinitionShape;
}
public BbExtrudedGeometry(
BbProfile profile,
BbPosition3D position3D,
BbDirection3D direction3D,
double depth
)
{
_ifcExtrudedAreaSolid = new IfcExtrudedAreaSolid {
SweptArea = profile.IfcProfileDef,
Position = position3D.IfcAxis2Placement3D,
ExtrudedDirection = direction3D.IfcDirection,
Depth = depth,
};
_ifcShapeRepresentation = new IfcShapeRepresentation
{
ContextOfItems = BbHeaderSetting.Setting3D.GeometricRepresentationContext,
RepresentationIdentifier = "Body",
RepresentationType = "SweptSolid",
Items = new List <IfcRepresentationItem>(),
};
_ifcShapeRepresentation.Items.Add(_ifcExtrudedAreaSolid);
_ifcProductDefinitionShape = new IfcProductDefinitionShape
{
// Name=
// Description =
Representations = new List <IfcRepresentation>(),
};
_ifcProductDefinitionShape.Representations.Add(_ifcShapeRepresentation);
}
public static BbLocalPlacement3D Create(BbLocalPlacement3D placementRelTo, BbPosition3D relativePlacement)
{
var placement3D = new BbLocalPlacement3D(placementRelTo, relativePlacement);
BbInstanceDB.AddToExport(placement3D);
return(placement3D);
}
private BbPiece(string name, string objectType, BbProfile profile,
double length, BbCoordinate3D position, BbDirection3D zAxis,
BbDirection3D xAxis, BbDirection3D extrudeDirection,
BbLocalPlacement3D hostPlacement, Type ifcEntityType)
{
Length = length;
Profile = profile;
var pos = BbPosition3D.Create(position, zAxis, xAxis);
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
hostPlacement, pos);
var semExtrudedGeometry = BbExtrudedGeometry.Create(
profile,
BbHeaderSetting.Setting3D.DefaultBbPosition3D,
extrudeDirection,
Length);
_ifcElement = Activator.CreateInstance(ifcEntityType) as IfcElement;
if (_ifcElement == null)
{
return;
}
_ifcElement.GlobalId = IfcGloballyUniqueId.ConvertToIfcGuid(Guid);
_ifcElement.OwnerHistory = BbHeaderSetting.Setting3D.IfcOwnerHistory;
_ifcElement.Name = name;
_ifcElement.ObjectType = objectType;
_ifcElement.ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement;
_ifcElement.Representation = semExtrudedGeometry.IfcProductDefinitionShape;
//_ifcElement.Tag = id;
}
// ExtrudedElement(
// string name,
// Profile profile,
// double length,
// Coordinate3D position,
// Direction3D zAxis,
// Direction3D xAxis,
// Direction3D extrudeDirection,
// Element container)
// :this (name, profile, length, position, zAxis, xAxis, extrudeDirection,
// container.ObjectLocalPlacement, container.IfcElement.OwnerHistory)
// {}
//
// ExtrudedElement(
// string name,
// Profile profile,
// double length,
// Coordinate3D position,
// Direction3D zAxis,
// Direction3D xAxis,
// Direction3D extrudeDirection,
// SpatialElement container)
// :this (name, profile, length, position, zAxis, xAxis, extrudeDirection,
// container.ObjectLocalPlacement, container.IfcSpatialStructureElement.OwnerHistory)
// {}
BbExtrudedElement(
string name,
BbProfile profile,
double length,
BbCoordinate3D position,
BbDirection3D zAxis,
BbDirection3D xAxis,
BbDirection3D extrudeDirection,
BbLocalPlacement3D containerLocation,
IfcOwnerHistory ownerHistory,
Type ifcEntityType)
{
Name = name;
Profile = profile;
Length = length;
BbPosition3D pos = BbPosition3D.Create(position, zAxis, xAxis);
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
containerLocation, pos);
BbExtrudedGeometry bbExtrudedGeometry = BbExtrudedGeometry.Create(
profile,
BbHeaderSetting.Setting3D.DefaultBbPosition3D,
BbHeaderSetting.Setting3D.ZAxis,
Length);
_ifcElement = Activator.CreateInstance(ifcEntityType) as IfcElement;
_ifcElement.GlobalId = IfcGloballyUniqueId.NewGuid();
_ifcElement.OwnerHistory = ownerHistory;
_ifcElement.Name = Name;
//ObjectType = ,
_ifcElement.ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement;
_ifcElement.Representation = bbExtrudedGeometry.IfcProductDefinitionShape;
}
public static BbSkewedEnd Create(BbElement hostElement,
BbPosition3D position3D)
{
var cutSkewedEnd = new BbSkewedEnd(hostElement, position3D);
BbInstanceDB.AddToExport(cutSkewedEnd);
return(cutSkewedEnd);
}
// public Position3D (double[] position)
// :this(Coordinate3D.Create(position))
// {
// }
// public static Position3D Create ()
// {
// Position3D position = new Position3D ();
//
// BbInstanceDB.Add (position);
// return position;
// }
// public static Position3D Create (double[] position)
// {
// Position3D position3D = new Position3D (position);
// BbInstanceDB.Add (position3D);
// return position3D;
// }
//public static BbPosition3D Create()
//{
// return Create(BbCoordinate3D.Create());
//}
//public static BbPosition3D Create(BbCoordinate3D coordinate3D)
//{
// BbPosition3D position3D = new BbPosition3D(coordinate3D);
// BbInstanceDB.AddToExport(position3D);
// return position3D;
//}
public static BbPosition3D Create(BbCoordinate3D coordinate3D,
BbDirection3D axis, BbDirection3D refDirection)
{
BbPosition3D position = new BbPosition3D(coordinate3D, axis, refDirection);
BbInstanceDB.AddToExport(position);
return(position);
}
public BbCutCope(
BbElement hostElement,
BbProfile profile,
double length,
double[] zAxis,
double[] xAxis,
double[] extrudeDirection,
double[] position)
{
//ObjectLocalPlacement = new LocalPlacement3D(hostElement.ObjectLocalPlacement, new Position3D(position));
/// from main piece
BbPosition3D pos = BbPosition3D.Create(
BbCoordinate3D.Create(position),
BbDirection3D.Create(zAxis),
BbDirection3D.Create(xAxis));
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
hostElement.ObjectBbLocalPlacement, pos);
BbDirection3D exDir;
if (Math.Round(extrudeDirection[0], 8) == 0.0 && Math.Round(extrudeDirection[0], 8) == 0 && Math.Round(extrudeDirection[0], 8) == 1)
{
exDir = BbHeaderSetting.Setting3D.ZAxis;
}
else
{
exDir = BbDirection3D.Create(extrudeDirection);
}
BbExtrudedGeometry bbExtrudedGeometry = BbExtrudedGeometry.Create(
profile,
BbHeaderSetting.Setting3D.DefaultBbPosition3D,
exDir,
length);
_ifcOpeningElement = new IfcOpeningElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
// Name =
// Description =
ObjectType = "Opening",
ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement,
Representation = bbExtrudedGeometry.IfcProductDefinitionShape,
};
_ifcRelVoidsElement = new IfcRelVoidsElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
Name = "Cope",
RelatingBuildingElement = hostElement.IfcObject as IfcElement,
RelatedOpeningElement = _ifcOpeningElement,
};
}
public static BbSkewedEnd Create(BbElement hostElement,
BbPosition3D position3D,
BbPropertySet bbPropertySet, double skewedAngleX, double skewedAngleY)
{
var cutSkewedEnd = new BbSkewedEnd(hostElement, position3D);
cutSkewedEnd.AddSkewedEndProperty(bbPropertySet, skewedAngleX, skewedAngleY);
BbInstanceDB.AddToExport(cutSkewedEnd);
return(cutSkewedEnd);
}
protected void AddBoltDirection(BbCurveGeometry boltDirection, BbCoordinate3D position)
{
BoltDirection = boltDirection;
var pos = BbPosition3D.Create(position, BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis);
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
MainElement.ObjectBbLocalPlacement, pos);
_ifcElement.ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement;
}
public void AddWeldingPath(BbCurveGeometry weldingPath, BbCoordinate3D position)
{
WeldingPath = weldingPath;
var pos = BbPosition3D.Create(position,
BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis);
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
MainElement.ObjectBbLocalPlacement, pos);
_ifcElement.ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement;
}
void SetBbDirection3D()
{
XAxis = RefDirection = BbDirection3D.Create(1, 0, 0);
YAxis = BbDirection3D.Create(0, 1, 0);
ZAxis = Axis = BbDirection3D.Create(0, 0, 1);
XAxisMinus = BbDirection3D.Create(-1, 0, 0);
YAxisMinus = BbDirection3D.Create(0, -1, 0);
ZAxisMinus = BbDirection3D.Create(0, 0, -1);
DefaultOrigin = BbCoordinate3D.Create();
DefaultBbPosition3D = BbPosition3D.Create(DefaultOrigin, Axis, RefDirection);
}
public static BbExtrudedGeometry Create(
BbProfile profile,
BbPosition3D position3D,
BbDirection3D direction3D,
double depth)
{
var extrudedGeometry = new BbExtrudedGeometry(profile,
position3D,
direction3D,
depth);
return(extrudedGeometry);
}
public void AddGeometricRepresentation(BbElement hostElement, BbSurfaceGeometry surfaceGeometry,
BbPosition3D position3D)
{
var ploc = BbLocalPlacement3D.Create(
hostElement.ObjectBbLocalPlacement,
BbPosition3D.Create(
BbCoordinate3D.Create(0, 254, 100),
BbHeaderSetting.Setting3D.YAxis,
BbHeaderSetting.Setting3D.XAxisMinus)
);
AddGeometricRepresentation(hostElement, surfaceGeometry, ploc);
}
public BbCutCope(
BbElement hostElement,
double copeWidth,
double copeDepth,
double copeRadius,
double[] position)
{
BbCopeProfile profile = BbCopeProfile.Create(copeWidth, copeDepth, copeRadius);
var mainPart = hostElement as BbPiece;
if (mainPart == null)
{
return;
}
BbPosition3D pos = BbPosition3D.Create(
BbCoordinate3D.Create(position),
BbHeaderSetting.Setting3D.XAxisMinus,
BbHeaderSetting.Setting3D.ZAxis);
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
hostElement.ObjectBbLocalPlacement, pos);
BbExtrudedGeometry bbExtrudedGeometry = BbExtrudedGeometry.Create(
profile,
BbHeaderSetting.Setting3D.DefaultBbPosition3D,
BbHeaderSetting.Setting3D.ZAxis,
mainPart.Profile.Width);
_ifcOpeningElement = new IfcOpeningElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
// Name =
// Description =
ObjectType = "Opening",
ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement,
Representation = bbExtrudedGeometry.IfcProductDefinitionShape,
};
_ifcRelVoidsElement = new IfcRelVoidsElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
Name = "Cope",
RelatingBuildingElement = hostElement.IfcObject as IfcElement,
RelatedOpeningElement = _ifcOpeningElement,
};
}
BbLocalPlacement3D(
BbLocalPlacement3D placementRelTo, BbPosition3D relativePlacement)
{
if (placementRelTo != null && relativePlacement != null)
{
IfcLocalPlacement = new IfcLocalPlacement
{
PlacementRelTo = placementRelTo.IfcLocalPlacement,
RelativePlacement = new IfcAxis2Placement
{
Value = relativePlacement.IfcAxis2Placement3D,
},
};
}
else if (placementRelTo == null && relativePlacement != null)
{
IfcLocalPlacement = new IfcLocalPlacement
{
RelativePlacement = new IfcAxis2Placement
{
Value = relativePlacement.IfcAxis2Placement3D,
},
};
}
else
{
IfcLocalPlacement = new IfcLocalPlacement
{
RelativePlacement = new IfcAxis2Placement
{
Value = BbHeaderSetting.Setting3D.DefaultBbPosition3D.IfcAxis2Placement3D,
},
};
}
}
public static BbSkewedEnd Create(BbElement hostElement,
BbPosition3D position3D,
BbPropertySet bbPropertySet, double skewedAngleX, double skewedAngleY)
{
var cutSkewedEnd = new BbSkewedEnd(hostElement, position3D);
cutSkewedEnd.AddSkewedEndProperty(bbPropertySet, skewedAngleX, skewedAngleY);
BbInstanceDB.AddToExport(cutSkewedEnd);
return cutSkewedEnd;
}
public static BbSkewedEnd Create(BbElement hostElement,
BbPosition3D position3D)
{
var cutSkewedEnd = new BbSkewedEnd(hostElement, position3D);
BbInstanceDB.AddToExport(cutSkewedEnd);
return cutSkewedEnd;
}
protected BbAssembly(
string assemblyId,
string assemblyName,
string assemblyMark,
string clientMark,
string prelimMark,
string shippingMark,
string barCode,
BbSpatialElement floor,
BbCoordinate3D position,
BbDirection3D zAxis,
BbDirection3D xAxis
)
{
//AssemblyName = assemblyName;
//AssemblyMark = assemblyMark;
var pos = BbPosition3D.Create(position, zAxis, xAxis);
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
floor.ObjectBbLocalPlacement, pos);
_ifcElementAssembly = new IfcElementAssembly
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = floor.IfcSpatialStructureElement.OwnerHistory,
Name = assemblyName,
Description = null,
ObjectType = null,
ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement,
Representation = null,
Tag = assemblyId,
AssemblyPlace = IfcAssemblyPlaceEnum.NOTDEFINED,
PredefinedType = IfcElementAssemblyTypeEnum.RIGID_FRAME
};
BbAssemblyIdentity = BbAssemblyIdentity.Create(
// assemblyName,
assemblyMark, clientMark, prelimMark, shippingMark,
barCode);
BbAssemblyIdentity.AssignTo(this);
AddToSpatialElement(floor);
// var relContaineds = EarlyBindingInstanceModel.GetDataByType("IfcRelContainedInSpatialStructure");
//var thecontained = from y in ( from x in relContaineds
// select x.Value as IfcRelContainedInSpatialStructure)
// where y.;
//var b = BbInstanceDB.GetTypedList(typeof(BbAssembly));
//if (b == null)
//{
// IfcRelContainedInSpatialStructure = new IfcRelContainedInSpatialStructure
// {
// GlobalId = IfcGloballyUniqueId.NewGuid(),
// OwnerHistory = _ifcElementAssembly.OwnerHistory,
// RelatingStructure = floor.IfcSpatialStructureElement,
// RelatedElements = new List<IfcProduct>(),
// };
//}
//else
//{
// var otherAssemblies = (from x in b.OfType<BbAssembly>()
// select x).ToList();
// //var a = otherAssemblies as IList<BbAssembly>;
// var other = (from x in otherAssemblies
// where x.BbSpatialElement.IfcSpatialStructureElement.Name
// == BbSpatialElement.IfcSpatialStructureElement.Name
// select x).First();
// if (other == null)
// {
// IfcRelContainedInSpatialStructure = new IfcRelContainedInSpatialStructure
// {
// GlobalId = IfcGloballyUniqueId.NewGuid(),
// OwnerHistory = _ifcElementAssembly.OwnerHistory,
// RelatingStructure = BbSpatialElement.IfcSpatialStructureElement,
// RelatedElements = new List<IfcProduct>(),
// };
// }
// else
// {
// IfcRelContainedInSpatialStructure = other.IfcRelContainedInSpatialStructure;
// }
//}
//IfcRelContainedInSpatialStructure.RelatedElements.Add(_ifcElementAssembly);
}
BbLocalPlacement3D(BbPosition3D relativePlacement)
: this(null, relativePlacement)
{
}
public static bool Tester4Writer(string filename)
{
EarlyBindingInstanceModel.Reset();
BbInstanceDB.Reset();
//var em11PsetName = @"AISC_EM11_Pset_Status";
BbHeaderSetting.Create(
"donghoon", "Georgia Tech", "sem Tool", "alpha 1", "gatech", BbUnit.Metric);
var floor = BbFloor.CreateSingleStoreyProject(
"project", "site", "building", "1st floor", 0);
// assembly 1-Beam-------------------------------------------------------------------------------------
var assembly = BbAssembly.Create(
"assid001",
"Steel Assembly",
"ASS01",
"client_marker",
"prelim_marker",
"ship_mark",
"102301123423", floor,
BbCoordinate3D.Create(0, 0, 6000), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis);
// assembly 1 properties
//Quantity
var qAssemBeam = BbQuantityRequired.Create();
qAssemBeam.Add(assembly);
//Finish/tearment
//var paintAssem = BbPaintFinish.Create();
//var paintAssem = BbPaintFinish.Create("Paint", "PAINTED", assembly);
//paintAssem.AddToElement(assembly);
// assembly.AddPaintFinish(paintAssem);
var pSetAssemSTr01 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintAssem1Pset = BbSurfaceTreatmentProperty.Create(pSetAssemSTr01, new List <string> {
"Painted"
});
paintAssem1Pset.AssignTo(assembly);
//Scheduling
var pSetAssemSc01 = BbPropertySet.Create(@"AISC_EM11_Pset_Schedule");
var AssemSch01 = BbSchedule.Create(pSetAssemSc01, "seq01", "seqLevel 01", DateTime.Now);
AssemSch01.AssignTo(assembly);
//Status
var pSetAssemSt01 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var AssemStat01 = BbStatus.Create(pSetAssemSt01, "Default", "Default", true);
AssemStat01.AssignTo(assembly);
//Drawing number
var pSetAssemDN01 = BbPropertySet.Create(@"AISC_EM11_Pset_DrawingNumber");
var DnumberAssem1Pset = BbDrawingNumber.Create(pSetAssemDN01, new List <string> {
"DR001PH1005", "DR001PH1004"
});
DnumberAssem1Pset.AssignTo(assembly);
//Version
var pSetAssemVr01 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionAssem01 = BbVersion.Create(pSetAssemVr01, "versionAssem01");
versionAssem01.AssignTo(assembly);
// main piece 1- Beam------------------------------------------------------------------------------------
var profile = BbNamedIProfile.Create("AISC", "W460X260", 260, 508, 22.6, 40.4);
var mainPart = BbMainPiece.Create(
"P0001",
"main piece", profile, 6000,
BbCoordinate3D.Create(0, 0, -254),
BbHeaderSetting.Setting3D.XAxis,
BbHeaderSetting.Setting3D.YAxis,
assembly);
//var beamType = SemBeamType.Create("wideflange", "pm0001", IfcBeamTypeEnum.BEAM);
//beamType.Defines(mainPart);
// Main piece 1-Beam properties
//Identification
var pieceIdBeam01 = BbPieceIdentity.Create("indMark001", "pieceMark001", "prelimMark001", "barcode123456890", true);
pieceIdBeam01.AssignTo(mainPart);
//Material
var pSetMat2 = BbPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialBeam01 = BbMaterial.Create("ASTM A992", pSetMat2, "materialID001", "materialCert001", "materialGrade001", "materialType001");
materialBeam01.AssociateTo(mainPart);
//Quantity
var qBeam = BbQuantityRequired.Create();
qBeam.Add(mainPart);
//Finish/treatment
////var paint2 = PaintFinish.Create("p1001", "antirust", "paint");
var coord2d00 = BbCoordinate2D.Create(-100, 0);
var coord2d01 = BbCoordinate2D.Create(100, 0);
var coord2d02 = BbCoordinate2D.Create(100, 3400);
var coord2d03 = BbCoordinate2D.Create(-100, 3400);
var poly2d0 = BbPolyline2D.Create(new[] { coord2d00, coord2d01, coord2d02, coord2d03 });
var coord2d10 = BbCoordinate2D.Create(-40, 1500);
var coord2d11 = BbCoordinate2D.Create(40, 1500);
var coord2d12 = BbCoordinate2D.Create(40, 2500);
var coord2d13 = BbCoordinate2D.Create(-40, 2500);
var poly2d1 = BbPolyline2D.Create(new[] { coord2d10, coord2d11, coord2d12, coord2d13 });
var sg = BbSurfaceGeometry.Create(poly2d0, new[] { poly2d1 });
//var paint3 = SemPaintFinishPatch.Create("ANTIRUST", "PAINTED", sg);
var ploc = BbLocalPlacement3D.Create(
mainPart.ObjectBbLocalPlacement,
BbPosition3D.Create(
BbCoordinate3D.Create(0, 254, 100),
BbHeaderSetting.Setting3D.YAxis,
BbHeaderSetting.Setting3D.XAxisMinus)
);
//paint3.AddToElement(mainPart, ploc);
var pSetBeamSTr01 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintBeam1Pset = BbSurfaceTreatmentProperty.Create(pSetBeamSTr01, new List <string> {
"GALVANIZED"
});
paintBeam1Pset.AssignTo(mainPart);
//Status
var pSetBeamSt01 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusBeam01 = BbStatus.Create(pSetBeamSt01, "Default", "Default", false);
statusBeam01.AssignTo(mainPart);
//Version
var pSetBeamVr01 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionBeam01 = BbVersion.Create(pSetBeamVr01, "versionBeam01");
versionBeam01.AssignTo(mainPart);
//Tolerance
var pSetBeamLT01 = BbPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var toleranceBeam01 = BbLayoutTolerance.Create(pSetBeamLT01, 0.01);
toleranceBeam01.AssignTo(mainPart);
//Catellation
//No castellation needed
//Feature
//SemAnnotation.Create
// ("north", "LocationOfMark", mainPart, BbCoordinate3D.Create(0, 254, 5), BbDirection3D.YAxis2D,
// BbDirection3D.XAxisMinus2D);
//BbPosition3D pos = BbPosition3D.Create(
// BbCoordinate3D.Create(0, 0, 100),
// BbDirection3D.Create(0.215665546, -0.107832773, -0.970494959),
// BbDirection3D.Create(-0.970494959, 0.107832773, -0.215665546)
// );
//BbSkewedEnd.Create(mainPart, pos);
//// var arb = ArbitraryProfile.Create(poly2d0);
////
//// ExtrudedElement.Create(
//// "new", arb, 10, Coordinate3D.Create(0, 254, 100),
//// Direction3D.YAxis2D, Direction3D.XAxisMinus2D,
//// mainPart, typeof(IfcPlate));
////// TypeProduct.Create(mainPart, "main piece", typeof(IfcBeam));
//BbCutCope.Create(mainPart, 210, 50, 10, SemCopeLocation.BottomRight);
//BbCutCope.Create(mainPart, 210, 50, 10, SemCopeLocation.TopRight);
////CutCope.Create(mainPart, 210, 50, 10, CopeLocation.BottomLeft);
////CutCope.Create(mainPart, 210, 50, 10, CopeLocation.TopLeft);
var bHoleBeam01 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(1100, 60), 30, SemHoleLocation.Bottom, false);
var bHoleBeam02 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(1100, -60), 30, SemHoleLocation.Bottom, true);
var bHoleBeam03 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(1200, 60), 30, SemHoleLocation.Top, true);
var bHoleBeam04 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(1200, -60), 30, SemHoleLocation.Top, false);
//DrillHoles.Create(mainPart, Coordinate2D.Create(300, 60), 15, HoleLocation.Left, false);
//DrillHoles.Create(mainPart, Coordinate2D.Create(400, -60), 15, HoleLocation.Left, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(500, 60), 15, HoleLocation.Right, false);
//DrillHoles.Create(mainPart, Coordinate2D.Create(600, -60), 15, HoleLocation.Right, true);
var bHoleBeam05 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(700, 60), 15, SemHoleLocation.Web, false);
var bHoleBeam06 = BbDrillHoles.Create(mainPart, BbCoordinate2D.Create(800, -60), 15, SemHoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(6000 - 106.5, -100), 15, HoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(6000 - 91.5, 100), 20, HoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(101.5 + 5, -100), 15, HoleLocation.Web, true);
//DrillHoles.Create(mainPart, Coordinate2D.Create(101.5 + 5, 100), 15, HoleLocation.Web, true);
//Beam Bolt Hole properties
var pSetBeamBH01 = BbPropertySet.Create(@"AISC_EM11_Pset_BoltHole");
var boltHoleBeamPset1 = BbBoltHoleProperties.Create(pSetBeamBH01, "Drilling", "Top", "No design constraint", "Tapped Hole", 30, false, 0);
boltHoleBeamPset1.AssignTo(bHoleBeam01);
boltHoleBeamPset1.AssignTo(bHoleBeam02);
boltHoleBeamPset1.AssignTo(bHoleBeam03);
boltHoleBeamPset1.AssignTo(bHoleBeam04);
boltHoleBeamPset1.AssignTo(bHoleBeam05);
boltHoleBeamPset1.AssignTo(bHoleBeam06);
// Stiffeners-------------------------------------------------------------------------------------------
//Stiffener1
var stiffener1 = BbStiffener.Create("st00102", "stiffener", 100, 425, 35,
BbCoordinate3D.Create(65, 0, 5000), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis, mainPart);
//Stifenner1 properties
//Identification
var stiffIdentity1 = BbPieceIdentity.Create("indMark002", "pieceMark002", "prelimMark002", "barcode123456892", false);
stiffIdentity1.AssignTo(stiffener1);
//Status
var pSetStstiff01 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusstiff01 = BbStatus.Create(pSetStstiff01, "ReadyForProcurement", "Default", true);
statusstiff01.AssignTo(stiffener1);
//Version
var pSetVrstiff01 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionstiff01 = BbVersion.Create(pSetVrstiff01, "versionStiff01");
versionstiff01.AssignTo(stiffener1);
//Tolerance
var pSetLystiff01 = BbPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var tolerancestiff01 = BbLayoutTolerance.Create(pSetLystiff01, 0.01);
tolerancestiff01.AssignTo(stiffener1);
//Quantity
var qStiff = BbQuantityRequired.Create();
qStiff.Add(stiffener1);
//Material
var pSetMat1 = BbPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialStiff = BbMaterial.Create("ASTM A992", pSetMat1, "materialID002",
"materialCert002", "materialGrade002", "materialType002");
materialStiff.AssociateTo(stiffener1);
//Finish/treatment
//var paintStiff = BbPaintFinish.Create("stiffener paint", "PAINTED", stiffener1);
//paintStiff.AddToElement(stiffener1);
var pSetSTstiff01 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintStiffPset = BbSurfaceTreatmentProperty.Create(pSetSTstiff01, new List <string> {
"Galvanized"
});
paintStiffPset.AssignTo(stiffener1);
//Stiffener2-------------------------------
var stiffener2 = BbStiffener.Create("st00102", "stiffener", 100, 425, 35,
BbCoordinate3D.Create(-65, 0, 5000), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis, mainPart);
//Stifenner2 properties
//Identification
var stiffIdentity2 = BbPieceIdentity.Create("indMark003", "pieceMark003", "prelimMark003", "barcode123456893", false);
stiffIdentity2.AssignTo(stiffener2);
//Status
statusstiff01.AssignTo(stiffener2);
//Version
versionstiff01.AssignTo(stiffener2);
//Tolerance
tolerancestiff01.AssignTo(stiffener2);
//Quantity
qStiff.Add(stiffener2);
//Material
materialStiff.AssociateTo(stiffener2);
//Finish/treatment
//paintStiff.AddToOtherElement(stiffener2);
// stiffener2.AddPaintFinish(paintStiff);
//paintStiffPset.AssignTo(stiffener2);
//Stiffener3-------------------------------
var stiffener3 = BbStiffener.Create("st00102", "stiffener", 100, 425, 35,
BbCoordinate3D.Create(65, 0, 4600), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis, mainPart);
//Stifenner3 properties
//Identification
var stiffIdentity3 = BbPieceIdentity.Create("indMark004", "pieceMark004", "prelimMark004", "barcode123456894", false);
stiffIdentity3.AssignTo(stiffener3);
//Status
statusstiff01.AssignTo(stiffener3);
//Version
versionstiff01.AssignTo(stiffener3);
//Tolerance
tolerancestiff01.AssignTo(stiffener3);
//Quantity
qStiff.Add(stiffener3);
//Material
materialStiff.AssociateTo(stiffener3);
//Finish/treatment
//paintStiff.AddToOtherElement(stiffener3);
//stiffener3.AddPaintFinish(paintStiff);
//paintStiffPset.AssignTo(stiffener3);
//Stiffener4-------------------------------
var stiffener4 = BbStiffener.Create("st00102", "stiffener", 100, 425, 35,
BbCoordinate3D.Create(-65, 0, 4600), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis, mainPart);
//Stifenner4 properties
//Identification
var stiffIdentity4 = BbPieceIdentity.Create("indMark005", "pieceMark005", "prelimMark005", "barcode123456895", false);
stiffIdentity4.AssignTo(stiffener4);
//Status
statusstiff01.AssignTo(stiffener4);
//Version
versionstiff01.AssignTo(stiffener4);
//Tolerance
tolerancestiff01.AssignTo(stiffener4);
//Quantity
qStiff.Add(stiffener4);
//Material
materialStiff.AssociateTo(stiffener4);
//Finish/treatment
//paintStiff.AddToOtherElement(stiffener4);
//stiffener4.AddPaintFinish(paintStiff);
//paintStiffPset.AssignTo(stiffener4);
// welding stiffeners with beam //DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
//BbSlottedHole.Create(mainPart, BbCoordinate2D.Create(3000, 50), 70, 30, BbDirection2D.RefDirection2D,
// SemHoleLocation.Web, true);
//2 Clip angles for column1----------------------------------------------------------------------------------
var aProfile = BbNamedLProfile.Create("AISC", "L203X152X19", 203, 152, 19);
var derived1 = BbDerivedProfile.Create(aProfile, false, true);
// -90.3 for showing gap between elements
var angle = BbClipAngle.Create(
"a00102",
"angle",
derived1, 360,
//BbCoordinate3D.Create(5898.5, 90.3, -180 - 254),
BbCoordinate3D.Create(90.3, -180, 5898.5),
BbHeaderSetting.Setting3D.YAxis, BbHeaderSetting.Setting3D.Axis,
mainPart
);
//var w000 = BbCoordinate3D.Create(5898.5, 0, 0);
//var w001 = BbCoordinate3D.Create(5898.5, 0, 200);
var w000 = BbCoordinate3D.Create(5898.5, 0, 0);
var w001 = BbCoordinate3D.Create(5898.5, 0, 200);
var curve = BbPolyline3D.Create(new BbCoordinate3D[] { w000, w001 });
var curveGeometry = BbCurveGeometry.Create(curve);
//Clip angle 1 properties
//Identification
var angleIdentity1 = BbPieceIdentity.Create("indMark006", "pieceMark006", "prelimMark006", "barcode123456896", false);
angleIdentity1.AssignTo(angle);
//Status
var pSetStAngle01 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusAngle01 = BbStatus.Create(pSetStAngle01, "ReadyForProcurement", "Default", false);
statusAngle01.AssignTo(angle);
//Version
var pSetVrAngle01 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionAngle01 = BbVersion.Create(pSetVrAngle01, "versionAngle001");
versionAngle01.AssignTo(angle);
//Tolerance
var pSetLyAngle01 = BbPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var toleranceAngle01 = BbLayoutTolerance.Create(pSetLyAngle01, 0.01);
toleranceAngle01.AssignTo(angle);
//Quantity
var qAngle = BbQuantityRequired.Create();
qAngle.Add(angle);
//Material
var pSetMat3 = BbPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialAngle = BbMaterial.Create("ASTM A992", pSetMat3, "materialID003",
"materialCert003", "materialGrade003", "materialType003");
materialAngle.AssociateTo(angle);
//Finish/treatment
//var paintAngle = BbPaintFinish.Create("angle blasted", "BLASTED", angle);
//angle.AddPaintFinish(paintAngle);
//paintAngle.AddToElement(angle);
var pSetSTAngle01 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintAnglePset = BbSurfaceTreatmentProperty.Create(pSetSTAngle01, new List <string> {
"Galvanized"
});
paintAnglePset.AssignTo(angle);
//Feature
//DrillHoles.Create(angle, Coordinate2D.Create(100, -5), 15, HoleLocation.Bottom, false);
//DrillHoles.Create(angle, Coordinate2D.Create(300, 10), 20, HoleLocation.Bottom, false);
var bHoleAngle01 = BbDrillHoles.Create(angle, BbCoordinate2D.Create(80, 9.5), 15, SemHoleLocation.Right, false);
var bHoleAngle02 = BbDrillHoles.Create(angle, BbCoordinate2D.Create(280, 9.5), 20, SemHoleLocation.Right, false);
//Clip Angle1 Bolt Hole properties
var pSetAngleBH01 = BbPropertySet.Create(@"AISC_EM11_Pset_BoltHole");
var boltHoleAnglePset1 = BbBoltHoleProperties.Create(pSetAngleBH01, "Drilling", "Top", "No design constraint", "Tapped Hole", 30, false, 0);
boltHoleAnglePset1.AssignTo(bHoleAngle01);
boltHoleAnglePset1.AssignTo(bHoleAngle02);
var derived = BbDerivedProfile.Create(aProfile, true, true);
var angle2 = BbClipAngle.Create("a00103",
"angle", derived, 360,
//BbCoordinate3D.Create(5898.5, -90.3, -180 - 254),
BbCoordinate3D.Create(-90.3, -180, 5898.5),
//BbDirection3D.ZAxis, BbDirection3D.XAxis2D,
BbHeaderSetting.Setting3D.YAxis, BbHeaderSetting.Setting3D.Axis,
mainPart);
//Clip angle 2 properties
//Identification
var angleIdentity2 = BbPieceIdentity.Create("indMark007", "pieceMark007", "prelimMark007", "barcode123456897", false);
angleIdentity2.AssignTo(angle2);
//Status
statusAngle01.AssignTo(angle2);
//Version
versionAngle01.AssignTo(angle2);
//Tolerance
toleranceAngle01.AssignTo(angle2);
//Quantity
qAngle.Add(angle2);
//Material
materialAngle.AssociateTo(angle2);
//Finish/treatment
//angle2.AddPaintFinish(paintAngle);
//paintAngle.AddToOtherElement(angle2);
//paintAnglePset.AssignTo(angle2);
//DrillHoles.Create(angle2, Coordinate2D.Create(100, -5), 15, HoleLocation.Top, false);
//DrillHoles.Create(angle2, Coordinate2D.Create(300, 10), 20, HoleLocation.Top, false);
var bHoleAngle03 = BbDrillHoles.Create(angle2, BbCoordinate2D.Create(80, -9.5), 15, SemHoleLocation.Right, false);
var bHoleAngle04 = BbDrillHoles.Create(angle2, BbCoordinate2D.Create(280, -9.5), 20, SemHoleLocation.Right, false);
//Clip Angle2 Bolt Hole properties
boltHoleAnglePset1.AssignTo(bHoleAngle03);
boltHoleAnglePset1.AssignTo(bHoleAngle04);
var w1 = BbWeld.Create(mainPart, angle);
//var w1 = BbWeld.Create("Tee Joint", mainPart, angle);
//var w2 = Weld.Create("Tee Joint", mainPart, angle2);
w1.AddWeldingPath(curveGeometry, BbCoordinate3D.Create(0.0, 0.0, 0.0));
var pSetw1 = BbPropertySet.Create(@"AISC_EM11_Pset_Weld");
w1.AddProperties(pSetw1, "weld id", "weld description", "wps code", "category", "weld grade", 100, false);
w1.AddProperties(pSetw1, "weld type1", "weld type2", "weld surface1", "weld surface 2", 123, "weld process",
1, 2, 3, 4, 5, 6, 7, 8, false, false);
pSetw1.AssignTo(w1);
var wc000 = BbCoordinate3D.Create(5898.5, 0, 0);
var wc001 = BbCoordinate3D.Create(5898.5, 0, 200);
var ccurve = BbPolyline3D.Create(new BbCoordinate3D[] { wc000, wc001 });
var ccurveGeometry = BbCurveGeometry.Create(ccurve);
var boltAss = BbBoltAssembly.Create(mainPart, angle, ccurveGeometry, BbCoordinate3D.Create(1200, 60, 0));
var nut = BbNut.Create(boltAss);
var nutPSetw1 = BbPropertySet.Create(@"AISC_EM11_Pset_Nut");
nut.AddProperties(nutPSetw1, "nut standard", "nut type", 5, 3, false);
nutPSetw1.AssignTo(nut);
var washer1 = BbWasher.Create(boltAss);
var washerPSetw1 = BbPropertySet.Create(@"AISC_EM11_Pset_Washer");
nut.AddProperties(washerPSetw1, "washer standard", "washer type", 5, 2, false);
washerPSetw1.AssignTo(washer1);
var washer2 = BbWasher.Create(boltAss);
var washerPSetw2 = BbPropertySet.Create(@"AISC_EM11_Pset_Washer");
nut.AddProperties(washerPSetw2, "washer standard", "washer type", 5, 1, true);
washerPSetw2.AssignTo(washer2);
//w1.AddProperties();
//var wtype = SemWeldType.Create("Tee Joint", "tj0001");
//wtype.Defines(w1);
//wtype.Defines(w2);
////var derived2 = DerivedProfile.Create(aProfile, true, false);
////var angle3 = SteelPiece.Create("a00104",
//// "angle", derived2, 400,
//// Coordinate3D.Create(101.5, -90.3, -200 - 254), Direction3D.ZAxis, Direction3D.XAxis2D, assembly,
//// typeof(IfcDiscreteAccessory));
//////DrillHoles.Create(angle3, Coordinate2D.Create(100, 5), 15, HoleLocation.Top, false);
//////DrillHoles.Create(angle3, Coordinate2D.Create(300, 5), 15, HoleLocation.Top, false);
////DrillHoles.Create(angle3, Coordinate2D.Create(100, -10), 15, HoleLocation.Left, false);
////DrillHoles.Create(angle3, Coordinate2D.Create(300, -10), 15, HoleLocation.Left, false);
////var angle4 = SteelPiece.Create("a00105",
//// "angle", aProfile, 400,
//// Coordinate3D.Create(101.5, 90.3, -200 - 254), Direction3D.ZAxis, Direction3D.XAxis2D, assembly,
//// typeof(IfcDiscreteAccessory));
//////DrillHoles.Create(angle4, Coordinate2D.Create(100, 5), 15, HoleLocation.Bottom, false);
//////DrillHoles.Create(angle4, Coordinate2D.Create(300, 5), 15, HoleLocation.Bottom, false);
////DrillHoles.Create(angle4, Coordinate2D.Create(100, 10), 15, HoleLocation.Left, false);
////DrillHoles.Create(angle4, Coordinate2D.Create(300, 10), 15, HoleLocation.Left, false);
//Clip angle for column2----------------------------------------------------------------------------------
var derived3 = BbDerivedProfile.Create(aProfile, true, false);
var angle3 = BbClipAngle.Create(
"a00103",
"angle",
derived3, 360,
BbCoordinate3D.Create(-90.3, -180, 5898.5 - 5798.5),
BbHeaderSetting.Setting3D.YAxis, BbHeaderSetting.Setting3D.Axis,
mainPart
);
//Clip angle 3 properties
//Identification
var angleIdentity3 = BbPieceIdentity.Create("indMark008", "pieceMark008", "prelimMark008", "barcode123456898", false);
angleIdentity3.AssignTo(angle3);
//Status
statusAngle01.AssignTo(angle3);
//Version
versionAngle01.AssignTo(angle3);
//Tolerance
toleranceAngle01.AssignTo(angle3);
//Quantity
qAngle.Add(angle3);
//Material
materialAngle.AssociateTo(angle3);
//Finish/treatment
//angle3.AddPaintFinish(paintAngle);
//paintAngle.AddToOtherElement(angle3);
//paintAnglePset.AssignTo(angle3);
var bHoleAngle05 = BbDrillHoles.Create(angle3, BbCoordinate2D.Create(80, -10), 15, SemHoleLocation.Left, false);
var bHoleAngle06 = BbDrillHoles.Create(angle3, BbCoordinate2D.Create(280, -10), 15, SemHoleLocation.Left, false);
//Clip Angle3 Bolt Hole properties
boltHoleAnglePset1.AssignTo(bHoleAngle05);
boltHoleAnglePset1.AssignTo(bHoleAngle06);
var derived4 = BbDerivedProfile.Create(aProfile, false, false);
var angle4 = BbClipAngle.Create(
"a00104",
"angle",
derived4, 360,
BbCoordinate3D.Create(90.3, -180, 5898.5 - 5798.5),
BbHeaderSetting.Setting3D.YAxis, BbHeaderSetting.Setting3D.Axis,
mainPart
);
//Clip angle 4 properties
//Identification
var angleIdentity4 = BbPieceIdentity.Create("indMark009", "pieceMark009", "prelimMark009", "barcode123456899", false);
angleIdentity4.AssignTo(angle4);
//Status
statusAngle01.AssignTo(angle4);
//Version
versionAngle01.AssignTo(angle4);
//Tolerance
toleranceAngle01.AssignTo(angle4);
//Quantity
qAngle.Add(angle4);
//Material
materialAngle.AssociateTo(angle4);
//Finish/treatment
//angle4.AddPaintFinish(paintAngle);
//paintAngle.AddToOtherElement(angle4);
//paintAnglePset.AssignTo(angle4);
var bHoleAngle07 = BbDrillHoles.Create(angle4, BbCoordinate2D.Create(80, 10), 15, SemHoleLocation.Left, false);
var bHoleAngle08 = BbDrillHoles.Create(angle4, BbCoordinate2D.Create(280, 10), 15, SemHoleLocation.Left, false);
boltHoleAnglePset1.AssignTo(bHoleAngle07);
boltHoleAnglePset1.AssignTo(bHoleAngle08);
// welding column 2 & beam with angle 3,4//DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
// Assembly 2- Column1-------------------------------------------------------------------------------------
var assembly2 = BbAssembly.Create(
"assid003",
"Steel Assembly",
"ASS02", "client_marker2",
"prelim_marker2",
"ship_mark2",
"202301123433",
floor,
BbCoordinate3D.Create(6014.3, 0, 0),
BbHeaderSetting.Setting3D.ZAxis,
BbHeaderSetting.Setting3D.XAxis);
// assembly 2 properties
//Quantity
var qAssemCol1 = BbQuantityRequired.Create();
qAssemCol1.Add(assembly2);
//Finish/tearment
//var paintAssem2 = BbPaintFinish.Create("Assy gal", "GALVANIZED",assembly2);
//assembly2.AddPaintFinish(paintAssem2);
//paintAssem2.AddToElement(assembly2);
var pSetAssemSTr02 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintAssem2Pset = BbSurfaceTreatmentProperty.Create(pSetAssemSTr02, new List <string> {
"Galvanized"
});
paintAssem2Pset.AssignTo(assembly2);
//Scheduling
var pSetAssemSc02 = BbPropertySet.Create(@"AISC_EM11_Pset_Schedule");
var AssemSch02 = BbSchedule.Create(pSetAssemSc02, "seq01", "seqLevel 01", DateTime.Now);
AssemSch02.AssignTo(assembly2);
//Status
var pSetAssemSt02 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var AssemStat02 = BbStatus.Create(pSetAssemSt02, "Default", "Default", true);
AssemStat02.AssignTo(assembly2);
//Drawing number
var pSetAssemDN02 = BbPropertySet.Create(@"AISC_EM11_Pset_DrawingNumber");
var DnumberAssem2Pset = BbDrawingNumber.Create(pSetAssemDN02, new List <string> {
"DR001PH1006", "DR001PH1005"
});
DnumberAssem2Pset.AssignTo(assembly2);
//Version
var pSetAssemVr02 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionAssem02 = BbVersion.Create(pSetAssemVr02, "versionAssem02");
versionAssem02.AssignTo(assembly2);
//Main Piece 2- Column1
var mainPart2 = BbMainPiece.Create(
"c00102",
"main piece",
profile, 6000,
BbHeaderSetting.Setting3D.DefaultOrigin,
BbHeaderSetting.Setting3D.ZAxis,
BbHeaderSetting.Setting3D.XAxis,
assembly2);
// Column1 properties
//Identification
var pieceIdCol01 = BbPieceIdentity.Create("indMark010", "pieceMark010", "prelimMark010", "barcode123456880", true);
pieceIdCol01.AssignTo(mainPart2);
//Status
var pSetColSt01 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusCol01 = BbStatus.Create(pSetColSt01, "ReadyForProcurement", "Default", true);
statusCol01.AssignTo(mainPart2);
//Version
var pSetColVr01 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionCol01 = BbVersion.Create(pSetColVr01, "versionCol001");
versionCol01.AssignTo(mainPart2);
//Tolerance
var pSetColLy01 = BbPropertySet.Create(@"AISC_EM11_Pset_ToleranceForLayout");
var toleranceCol01 = BbLayoutTolerance.Create(pSetColLy01, 0.002);
toleranceCol01.AssignTo(mainPart2);
//Quantity
var qPieceCol = BbQuantityRequired.Create();
qPieceCol.Add(mainPart2);
//Material
var pSetMat4 = BbPropertySet.Create(@"AISC_EM11_Pset_MaterialProperty");
var materialCol1 = BbMaterial.Create("ASTM A992", pSetMat4, "materialID004",
"materialCert004", "materialGrade004", "materialType004");
materialCol1.AssociateTo(mainPart2);
//Finish/treatment
//var paintCol1 = BbPaintFinish.Create("paint col", "PAINTED", mainPart2);
//mainPart2.AddPaintFinish(paintCol1);
//paintCol1.AddToElement(mainPart2);
var pSetColST01 = BbPropertySet.Create(@"AISC_EM11_Pset_SurfaceTreatment");
var paintColPset = BbSurfaceTreatmentProperty.Create(pSetColST01, new List <string> {
"Blast"
});
paintColPset.AssignTo(mainPart2);
//Castellation
//var pSetCt02 = BbPropertySet.Create(@"AISC_EM11_Pset_Castellation");
//var castellation2 = BbCastellation.Create(pSetCt02, "Circular", 0.002, 0.002, 0.001, 0.002, 0.01, 0.001);
//castellation2.AssignTo(mainPart2);
//Features
var bHoleCol01 = BbDrillHoles.Create(mainPart2, BbCoordinate2D.Create(6000 - 508 / 2 - 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol02 = BbDrillHoles.Create(mainPart2, BbCoordinate2D.Create(6000 - 508 / 2 + 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol03 = BbDrillHoles.Create(mainPart2, BbCoordinate2D.Create(6000 - 508 / 2 - 100, -100), 15, SemHoleLocation.Web,
false);
var bHoleCol04 = BbDrillHoles.Create(mainPart2, BbCoordinate2D.Create(6000 - 508 / 2 + 100, -100), 15, SemHoleLocation.Web,
false);
var pSetColBH01 = BbPropertySet.Create(@"AISC_EM11_Pset_BoltHole");
var boltHoleColPset1 = BbBoltHoleProperties.Create(pSetColBH01, "Drilling", "Top", "No design constraint", "Tapped Hole", 20, false, 0);
boltHoleColPset1.AssignTo(bHoleCol01);
boltHoleColPset1.AssignTo(bHoleCol02);
boltHoleColPset1.AssignTo(bHoleCol03);
boltHoleColPset1.AssignTo(bHoleCol04);
BbSlottedHole.Create(mainPart2, BbCoordinate2D.Create(5000, 50), 100, 30, BbDirection2D.Create(0.9, 0.3),
SemHoleLocation.Web, true);
//Slotted Hole properties
// welding colum 1 with angle//DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
//SemConnectedElements.Create(assembly, assembly2);
///////////////////////////////////////////weld
//var wp = BbWeldProperties.Create(10, 14);
//wp.AssignTo(w1);
//wp.AssignTo(w2);
// Assembly 3- Column2----------------------------------------------------------------------------------------
var assembly3 = BbAssembly.Create(
"assid003", "Steel Assembly", "ASS02", "client_marker3", "prelim_marker3", "ship_mark3", "302301123425",
floor,
BbCoordinate3D.Create(-14.3, 0, 0), BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis);
// Assembly 3 properties
//Quantity
qAssemCol1.Add(assembly3);
//Finish/tearment
//assembly3.AddPaintFinish(paintAssem2);
//paintAssem2.AddToOtherElement(assembly3);
//paintAssem2Pset.AssignTo(assembly3);
//Scheduling
AssemSch02.AssignTo(assembly3);
//Status
AssemStat02.AssignTo(assembly3);
//Drawing number
var pSetAssemDN03 = BbPropertySet.Create(@"AISC_EM11_Pset_DrawingNumber");
var DnumberAssem3Pset = BbDrawingNumber.Create(pSetAssemDN03, new List <string> {
"DR001PH1006", "DR001PH1005", "DR001PH1008"
});
DnumberAssem3Pset.AssignTo(assembly3);
//Version
versionAssem02.AssignTo(assembly3);
//Main Piece 3- Column 2
var mainPart3 = BbMainPiece.Create("c20010",
"main piece", profile, 6000,
BbHeaderSetting.Setting3D.DefaultOrigin, BbHeaderSetting.Setting3D.ZAxis, BbHeaderSetting.Setting3D.XAxis, assembly3);
//Column2 properties
//Identification
var pieceIdCol02 = BbPieceIdentity.Create("indMark011", "pieceMark011", "prelimMark011", "barcode123456881", true);
pieceIdCol02.AssignTo(mainPart3);
//Status
var pSetColSt02 = BbPropertySet.Create(@"AISC_EM11_Pset_StatusInformation");
var statusCol02 = BbStatus.Create(pSetColSt02, "ReadyForMill", "Default", true);
statusCol02.AssignTo(mainPart3);
//Version
var pSetColVr02 = BbPropertySet.Create(@"AISC_EM11_Pset_VersionInformation");
var versionCol02 = BbVersion.Create(pSetColVr02, "versionCol002");
versionCol02.AssignTo(mainPart3);
//Tolerance
toleranceCol01.AssignTo(mainPart3);
//Quantity
qPieceCol.Add(mainPart3);
//Material
materialCol1.AssociateTo(mainPart3);
//Finish/treatment
//mainPart3.AddPaintFinish(paintCol1);
//paintCol1.AddToOtherElement(mainPart3);
//paintColPset.AssignTo(mainPart3);
//Castellation- not required
//var pSetCt02 = BbPropertySet.Create(@"AISC_EM11_Pset_Castellation");
//var castellation2 = BbCastellation.Create(pSetCt02, "Circular", 0.002, 0.002, 0.001, 0.002, 0.01, 0.001);
//castellation2.AssignTo(mainPart2);
// Column2 features
var bHoleCol05 = BbDrillHoles.Create(mainPart3, BbCoordinate2D.Create(6000 - 508 / 2 - 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol06 = BbDrillHoles.Create(mainPart3, BbCoordinate2D.Create(6000 - 508 / 2 + 100, 100), 15, SemHoleLocation.Web,
false);
var bHoleCol07 = BbDrillHoles.Create(mainPart3, BbCoordinate2D.Create(6000 - 508 / 2 - 100, -100), 15, SemHoleLocation.Web,
false);
var bHoleCol08 = BbDrillHoles.Create(mainPart3, BbCoordinate2D.Create(6000 - 508 / 2 + 100, -100), 15, SemHoleLocation.Web,
false);
boltHoleColPset1.AssignTo(bHoleCol05);
boltHoleColPset1.AssignTo(bHoleCol06);
boltHoleColPset1.AssignTo(bHoleCol07);
boltHoleColPset1.AssignTo(bHoleCol08);
return(BbInstanceDB.Write(filename));
}
public static BbLocalPlacement3D Create(BbLocalPlacement3D placementRelTo, BbPosition3D relativePlacement)
{
var placement3D = new BbLocalPlacement3D(placementRelTo, relativePlacement);
BbInstanceDB.AddToExport(placement3D);
return placement3D;
}
BbCutCope(
BbElement hostElement,
double copeWidth,
double copeDepth,
double copeRadius,
SemCopeLocation copeLocation)
{
BbCopeProfile profile = BbCopeProfile.Create(copeWidth, copeDepth, copeRadius, copeLocation);
var mainPart = hostElement as BbPiece;
if (mainPart == null)
{
return;
}
BbPosition3D pos;
switch (copeLocation)
{
case SemCopeLocation.BottomLeft:
pos = BbPosition3D.Create(
BbCoordinate3D.Create(new double[] {
mainPart.Profile.Width / 2,
-mainPart.Profile.Depth / 2,
0
}),
BbHeaderSetting.Setting3D.XAxisMinus,
BbHeaderSetting.Setting3D.ZAxis);
break;
case SemCopeLocation.BottomRight:
pos = BbPosition3D.Create(
BbCoordinate3D.Create(new double[] {
mainPart.Profile.Width / 2,
-mainPart.Profile.Depth / 2,
mainPart.Length
}),
BbHeaderSetting.Setting3D.XAxisMinus,
BbHeaderSetting.Setting3D.ZAxis);
break;
case SemCopeLocation.TopRight:
pos = BbPosition3D.Create(
BbCoordinate3D.Create(new double[] {
mainPart.Profile.Width / 2,
mainPart.Profile.Depth / 2,
mainPart.Length
}),
BbHeaderSetting.Setting3D.XAxisMinus,
BbHeaderSetting.Setting3D.ZAxis);
break;
default: // TopLeft
pos = BbPosition3D.Create(
BbCoordinate3D.Create(new double[] {
mainPart.Profile.Width / 2,
mainPart.Profile.Depth / 2,
0
}),
BbHeaderSetting.Setting3D.XAxisMinus,
BbHeaderSetting.Setting3D.ZAxis);
break;
}
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
hostElement.ObjectBbLocalPlacement, pos);
BbExtrudedGeometry bbExtrudedGeometry = BbExtrudedGeometry.Create(
profile,
BbHeaderSetting.Setting3D.DefaultBbPosition3D,
BbHeaderSetting.Setting3D.ZAxis,
mainPart.Profile.Width);
_ifcOpeningElement = new IfcOpeningElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
// Name =
// Description =
ObjectType = "Opening",
ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement,
Representation = bbExtrudedGeometry.IfcProductDefinitionShape,
};
_ifcRelVoidsElement = new IfcRelVoidsElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
Name = "Cope",
RelatingBuildingElement = hostElement.IfcObject as IfcElement,
RelatedOpeningElement = _ifcOpeningElement,
};
}
void SetBbDirection3D()
{
XAxis = RefDirection = BbDirection3D.Create(1, 0, 0);
YAxis = BbDirection3D.Create(0, 1, 0);
ZAxis = Axis = BbDirection3D.Create(0, 0, 1);
XAxisMinus = BbDirection3D.Create(-1, 0, 0);
YAxisMinus = BbDirection3D.Create(0, -1, 0);
ZAxisMinus = BbDirection3D.Create(0, 0, -1);
DefaultOrigin = BbCoordinate3D.Create();
DefaultBbPosition3D = BbPosition3D.Create(DefaultOrigin, Axis, RefDirection);
}
public void AddGeometricRepresentation(BbElement hostElement, BbSurfaceGeometry surfaceGeometry,
BbPosition3D position3D)
{
var ploc = BbLocalPlacement3D.Create(
hostElement.ObjectBbLocalPlacement,
BbPosition3D.Create(
BbCoordinate3D.Create(0, 254, 100),
BbHeaderSetting.Setting3D.YAxis,
BbHeaderSetting.Setting3D.XAxisMinus)
);
AddGeometricRepresentation(hostElement, surfaceGeometry, ploc);
}
BbSkewedEnd(
BbElement hostElement,
BbPosition3D pos)
{
var mainPart = hostElement as BbPiece;
if (mainPart == null)
return;
var width = mainPart.Length > mainPart.Profile.Width ? mainPart.Length : mainPart.Profile.Width;
width = width * 100;
var depth = mainPart.Length > mainPart.Profile.Depth ? mainPart.Length : mainPart.Profile.Depth;
depth = depth* 100;
var profile = BbNamedRectangleProfile.Create(width, depth);
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
hostElement.ObjectBbLocalPlacement, pos);
//Direction3D exDir = Direction3D.Create(new[] {pos.Axis.X, pos.Axis.Y, pos.Axis.Z});
BbExtrudedGeometry bbExtrudedGeometry = BbExtrudedGeometry.Create(
profile,
BbHeaderSetting.Setting3D.DefaultBbPosition3D,
BbHeaderSetting.Setting3D.ZAxis,
mainPart.Length);
//IfcHalfSpaceSolid ifcHalfSpaceSolid = new IfcHalfSpaceSolid
// {
// BaseSurface = new IfcPlane
// {
// Position = pos.IfcAxis2Placement3D,
// },
// AgreementFlag = true,
// };
//IfcShapeRepresentation ifcShapeRepresentation = new IfcShapeRepresentation
//{
// ContextOfItems = HeaderSetting.Setting3D.GeometricRepresentationContext,
// RepresentationIdentifier = "Body",
// RepresentationType = "SweptSolid",
// //RepresentationIdentifier = "Body",
// //RepresentationType = "SolidModel",
// Items = new List<IfcRepresentationItem>(),
//};
//ifcShapeRepresentation.Items.Add(ifcHalfSpaceSolid);
//IfcProductDefinitionShape ifcProductDefinitionShape = new IfcProductDefinitionShape
//{
// // Name=
// // Description =
// Representations = new List<IfcRepresentation>(),
//};
//ifcProductDefinitionShape.Representations.Add(ifcShapeRepresentation);
_ifcOpeningElement = new IfcOpeningElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
// Name =
// Description =
ObjectType = "Opening",
ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement,
Representation = bbExtrudedGeometry.IfcProductDefinitionShape,
//Representation = ifcProductDefinitionShape,
};
_ifcRelVoidsElement = new IfcRelVoidsElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
Name = "Skewed End",
RelatingBuildingElement = hostElement.IfcObject as IfcElement,
RelatedOpeningElement = _ifcOpeningElement,
};
}
public static BbExtrudedGeometry Create(
BbProfile profile,
BbPosition3D position3D,
BbDirection3D direction3D,
double depth)
{
var extrudedGeometry = new BbExtrudedGeometry(profile,
position3D,
direction3D,
depth);
return extrudedGeometry;
}
BbSkewedEnd(
BbElement hostElement,
BbPosition3D pos)
{
var mainPart = hostElement as BbPiece;
if (mainPart == null)
{
return;
}
var width = mainPart.Length > mainPart.Profile.Width ? mainPart.Length : mainPart.Profile.Width;
width = width * 100;
var depth = mainPart.Length > mainPart.Profile.Depth ? mainPart.Length : mainPart.Profile.Depth;
depth = depth * 100;
var profile = BbNamedRectangleProfile.Create(width, depth);
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
hostElement.ObjectBbLocalPlacement, pos);
//Direction3D exDir = Direction3D.Create(new[] {pos.Axis.X, pos.Axis.Y, pos.Axis.Z});
BbExtrudedGeometry bbExtrudedGeometry = BbExtrudedGeometry.Create(
profile,
BbHeaderSetting.Setting3D.DefaultBbPosition3D,
BbHeaderSetting.Setting3D.ZAxis,
mainPart.Length);
//IfcHalfSpaceSolid ifcHalfSpaceSolid = new IfcHalfSpaceSolid
// {
// BaseSurface = new IfcPlane
// {
// Position = pos.IfcAxis2Placement3D,
// },
// AgreementFlag = true,
// };
//IfcShapeRepresentation ifcShapeRepresentation = new IfcShapeRepresentation
//{
// ContextOfItems = HeaderSetting.Setting3D.GeometricRepresentationContext,
// RepresentationIdentifier = "Body",
// RepresentationType = "SweptSolid",
// //RepresentationIdentifier = "Body",
// //RepresentationType = "SolidModel",
// Items = new List<IfcRepresentationItem>(),
//};
//ifcShapeRepresentation.Items.Add(ifcHalfSpaceSolid);
//IfcProductDefinitionShape ifcProductDefinitionShape = new IfcProductDefinitionShape
//{
// // Name=
// // Description =
// Representations = new List<IfcRepresentation>(),
//};
//ifcProductDefinitionShape.Representations.Add(ifcShapeRepresentation);
_ifcOpeningElement = new IfcOpeningElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
// Name =
// Description =
ObjectType = "Opening",
ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement,
Representation = bbExtrudedGeometry.IfcProductDefinitionShape,
//Representation = ifcProductDefinitionShape,
};
_ifcRelVoidsElement = new IfcRelVoidsElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
Name = "Skewed End",
RelatingBuildingElement = hostElement.IfcObject as IfcElement,
RelatedOpeningElement = _ifcOpeningElement,
};
}
protected BbOpening(
BbElement hostElement,
BbCoordinate2D position,
BbProfile profile,
SemHoleLocation location,
bool through,
string type
)
{
var mainPart = hostElement as BbPiece;
if (mainPart == null)
{
return;
}
double thickness;
BbPosition3D pos;
// x direction follows extrusion direction
// extrude origin projected to bottom or left becomes the origin
switch (location)
{
case SemHoleLocation.Left:
pos = BbPosition3D.Create(
BbCoordinate3D.Create(
-(mainPart.Profile.Width / 2),
position.Y,
position.X),
BbHeaderSetting.Setting3D.XAxis,
BbHeaderSetting.Setting3D.ZAxis);
if (through)
{
thickness = mainPart.Profile.Width;
}
else
{
thickness = mainPart.Profile.Width / 2;
}
break;
case SemHoleLocation.Right:
pos = BbPosition3D.Create(
BbCoordinate3D.Create(
(mainPart.Profile.Width / 2),
position.Y,
position.X),
BbHeaderSetting.Setting3D.XAxisMinus,
BbHeaderSetting.Setting3D.ZAxis);
if (through)
{
thickness = mainPart.Profile.Width;
}
else
{
thickness = mainPart.Profile.Width / 2;
}
break;
case SemHoleLocation.Web:
if (through)
{
pos = BbPosition3D.Create(
BbCoordinate3D.Create(
(mainPart.Profile.Width / 2),
position.Y,
position.X
),
BbHeaderSetting.Setting3D.XAxisMinus,
BbHeaderSetting.Setting3D.ZAxis);
thickness = mainPart.Profile.Width;
}
else
{
pos = BbPosition3D.Create(
BbCoordinate3D.Create(
(mainPart.Profile.Width / 4),
position.Y,
position.X
),
BbHeaderSetting.Setting3D.XAxisMinus,
BbHeaderSetting.Setting3D.ZAxis);
thickness = mainPart.Profile.Width / 2;
}
break;
case SemHoleLocation.Bottom:
pos = BbPosition3D.Create(
BbCoordinate3D.Create(
position.Y,
-(mainPart.Profile.Depth / 2),
position.X
),
BbHeaderSetting.Setting3D.YAxis,
BbHeaderSetting.Setting3D.ZAxis);
if (through)
{
thickness = mainPart.Profile.Depth;
}
else
{
thickness = mainPart.Profile.Depth / 2;
}
break;
case SemHoleLocation.Top:
default:
pos = BbPosition3D.Create(
BbCoordinate3D.Create(
position.Y,
(mainPart.Profile.Depth / 2),
position.X
),
BbHeaderSetting.Setting3D.YAxisMinus,
BbHeaderSetting.Setting3D.ZAxis);
if (through)
{
thickness = mainPart.Profile.Depth;
}
else
{
thickness = mainPart.Profile.Depth / 2;
}
break;
}
ObjectBbLocalPlacement = BbLocalPlacement3D.Create(
hostElement.ObjectBbLocalPlacement, pos);
BbExtrudedGeometry bbExtrudedGeometry = BbExtrudedGeometry.Create(
profile,
BbHeaderSetting.Setting3D.DefaultBbPosition3D,
BbHeaderSetting.Setting3D.ZAxis,
thickness);
_ifcOpeningElement = new IfcOpeningElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
// Name =
// Description =
ObjectType = "Opening",
ObjectPlacement = ObjectBbLocalPlacement.IfcLocalPlacement,
Representation = bbExtrudedGeometry.IfcProductDefinitionShape,
};
_ifcRelVoidsElement = new IfcRelVoidsElement
{
GlobalId = IfcGloballyUniqueId.NewGuid(),
OwnerHistory = hostElement.IfcObject.OwnerHistory,
Name = type,
RelatingBuildingElement = hostElement.IfcObject as IfcElement,
RelatedOpeningElement = _ifcOpeningElement,
};
}
// public Position3D (double[] position)
// :this(Coordinate3D.Create(position))
// {
// }
// public static Position3D Create ()
// {
// Position3D position = new Position3D ();
//
// BbInstanceDB.Add (position);
// return position;
// }
// public static Position3D Create (double[] position)
// {
// Position3D position3D = new Position3D (position);
// BbInstanceDB.Add (position3D);
// return position3D;
// }
//public static BbPosition3D Create()
//{
// return Create(BbCoordinate3D.Create());
//}
//public static BbPosition3D Create(BbCoordinate3D coordinate3D)
//{
// BbPosition3D position3D = new BbPosition3D(coordinate3D);
// BbInstanceDB.AddToExport(position3D);
// return position3D;
//}
public static BbPosition3D Create(BbCoordinate3D coordinate3D,
BbDirection3D axis, BbDirection3D refDirection)
{
BbPosition3D position = new BbPosition3D(coordinate3D, axis, refDirection);
BbInstanceDB.AddToExport(position);
return position;
}
BbLocalPlacement3D(BbPosition3D relativePlacement)
: this(null, relativePlacement)
{
}