public void Run()
{
//params
var compiled = IN_CompileJob;
var context = compiled.IN_CueContext;
OUT_Disc = new Disc();
//generation state
int curr_index;
int curr_blobIndex = -1;
int curr_blobMSF = -1;
BlobInfo curr_blobInfo = null;
long curr_blobOffset = -1;
//mount all input files
MountBlobs();
//unhappily, we cannot determine the length of all the tracks without knowing the length of the files
//now that the files are mounted, we can figure the track lengths
AnalyzeTracks();
//loop from track 1 to 99
//(track 0 isnt handled yet, that's way distant work)
for (int t = 1; t < TrackInfos.Count; t++)
{
TrackInfo ti = TrackInfos[t];
CompiledCueTrack cct = ti.CompiledCueTrack;
//---------------------------------
//setup track pregap processing
//per "Example 05" on digitalx.org, pregap can come from index specification and pregap command
int specifiedPregapLength = cct.PregapLength.Sector;
int impliedPregapLength = cct.Indexes[1].FileMSF.Sector - cct.Indexes[0].FileMSF.Sector;
int totalPregapLength = specifiedPregapLength + impliedPregapLength;
//from now on we'll track relative timestamp and increment it continually
int relMSF = -totalPregapLength;
//read more at policies declaration
//if (!context.DiscMountPolicy.CUE_PauseContradictionModeA)
// relMSF += 1;
//---------------------------------
//---------------------------------
//generate sectors for this track.
//advance to the next file if needed
if (curr_blobIndex != cct.BlobIndex)
{
curr_blobIndex = cct.BlobIndex;
curr_blobOffset = 0;
curr_blobMSF = 0;
curr_blobInfo = BlobInfos[curr_blobIndex];
}
//work until the next track is reached, or the end of the current file is reached, depending on the track type
curr_index = 0;
for (; ;)
{
bool trackDone = false;
bool generateGap = false;
if (specifiedPregapLength > 0)
{
//if burning through a specified pregap, count it down
generateGap = true;
specifiedPregapLength--;
}
else
{
//if burning through the file, select the appropriate index by inspecting the next index and seeing if we've reached it
for (; ;)
{
if (curr_index == cct.Indexes.Count - 1)
{
break;
}
if (curr_blobMSF >= cct.Indexes[curr_index + 1].FileMSF.Sector)
{
curr_index++;
if (curr_index == 1)
{
//WE ARE NOW AT INDEX 1: generate the RawTOCEntry for this track
EmitRawTOCEntry(cct);
}
}
else
{
break;
}
}
}
//select the track type for the subQ
//it's obviously the same as the main track type usually, but during a pregap it can be different
TrackInfo qTrack = ti;
int qRelMSF = relMSF;
if (curr_index == 0)
{
//tweak relMSF due to ambiguity/contradiction in yellowbook docs
if (!context.DiscMountPolicy.CUE_PregapContradictionModeA)
{
qRelMSF++;
}
//[IEC10149] says there's two "intervals" of a pregap.
//mednafen's pseudocode interpretation of this:
//if this is a data track and the previous track was not data, the last 150 sectors of the pregap match this track and the earlier sectors (at least 75) math the previous track
//I agree, so let's do it that way
if (t != 1 && cct.TrackType != CueTrackType.Audio && TrackInfos[t - 1].CompiledCueTrack.TrackType == CueTrackType.Audio)
{
if (relMSF < -150)
{
qTrack = TrackInfos[t - 1];
}
}
}
//generate the right kind of sector synth for this track
SS_Base ss = null;
if (generateGap)
{
var ss_gap = new SS_Gap();
ss_gap.TrackType = qTrack.CompiledCueTrack.TrackType;
ss = ss_gap;
}
else
{
int sectorSize = int.MaxValue;
switch (qTrack.CompiledCueTrack.TrackType)
{
case CueTrackType.Audio:
case CueTrackType.CDI_2352:
case CueTrackType.Mode1_2352:
case CueTrackType.Mode2_2352:
ss = new SS_2352();
sectorSize = 2352;
break;
case CueTrackType.Mode1_2048:
ss = new SS_Mode1_2048();
sectorSize = 2048;
break;
default:
case CueTrackType.Mode2_2336:
throw new InvalidOperationException($"Not supported: {cct.TrackType}");
}
ss.Blob = curr_blobInfo.Blob;
ss.BlobOffset = curr_blobOffset;
curr_blobOffset += sectorSize;
curr_blobMSF++;
}
ss.Policy = context.DiscMountPolicy;
//setup subQ
byte ADR = 1; //absent some kind of policy for how to set it, this is a safe assumption:
ss.sq.SetStatus(ADR, (EControlQ)(int)qTrack.CompiledCueTrack.Flags);
ss.sq.q_tno = BCD2.FromDecimal(cct.Number);
ss.sq.q_index = BCD2.FromDecimal(curr_index);
ss.sq.AP_Timestamp = OUT_Disc._Sectors.Count;
ss.sq.Timestamp = qRelMSF;
//setup subP
if (curr_index == 0)
{
ss.Pause = true;
}
OUT_Disc._Sectors.Add(ss);
relMSF++;
if (cct.IsFinalInFile)
{
//sometimes, break when the file is exhausted
if (curr_blobOffset >= curr_blobInfo.Length)
{
trackDone = true;
}
}
else
{
//other times, break when the track is done
//(this check is safe because it's not the final track overall if it's not the final track in a file)
if (curr_blobMSF >= TrackInfos[t + 1].CompiledCueTrack.Indexes[0].FileMSF.Sector)
{
trackDone = true;
}
}
if (trackDone)
{
break;
}
}
//---------------------------------
//gen postgap sectors
int specifiedPostgapLength = cct.PostgapLength.Sector;
for (int s = 0; s < specifiedPostgapLength; s++)
{
var ss = new SS_Gap();
ss.TrackType = cct.TrackType; //TODO - old track type in some < -150 cases?
//-subq-
byte ADR = 1;
ss.sq.SetStatus(ADR, (EControlQ)(int)cct.Flags);
ss.sq.q_tno = BCD2.FromDecimal(cct.Number);
ss.sq.q_index = BCD2.FromDecimal(curr_index);
ss.sq.AP_Timestamp = OUT_Disc._Sectors.Count;
ss.sq.Timestamp = relMSF;
//-subP-
//always paused--is this good enough?
ss.Pause = true;
OUT_Disc._Sectors.Add(ss);
relMSF++;
}
} //end track loop
//add RawTOCEntries A0 A1 A2 to round out the TOC
var TOCMiscInfo = new Synthesize_A0A1A2_Job {
IN_FirstRecordedTrackNumber = IN_CompileJob.OUT_CompiledDiscInfo.FirstRecordedTrackNumber,
IN_LastRecordedTrackNumber = IN_CompileJob.OUT_CompiledDiscInfo.LastRecordedTrackNumber,
IN_Session1Format = IN_CompileJob.OUT_CompiledDiscInfo.SessionFormat,
IN_LeadoutTimestamp = OUT_Disc._Sectors.Count
};
TOCMiscInfo.Run(OUT_Disc.RawTOCEntries);
//TODO - generate leadout, or delegates at least
//blech, old crap, maybe
//OUT_Disc.Structure.Synthesize_TOCPointsFromSessions();
//FinishLog();
} //Run()
/// <exception cref="MDSParseException">no file found at <paramref name="mdsPath"/> or BLOB error</exception>
public Disc LoadMDSToDisc(string mdsPath, DiscMountPolicy IN_DiscMountPolicy)
{
var loadResults = LoadMDSPath(mdsPath);
if (!loadResults.Valid)
{
throw loadResults.FailureException;
}
Disc disc = new Disc();
// load all blobs
Dictionary <int, IBlob> BlobIndex = MountBlobs(loadResults.ParsedMDSFile, disc);
var mdsf = loadResults.ParsedMDSFile;
//generate DiscTOCRaw items from the ones specified in the MDS file
disc.RawTOCEntries = new List <RawTOCEntry>();
foreach (var entry in mdsf.TOCEntries)
{
disc.RawTOCEntries.Add(EmitRawTOCEntry(entry));
}
//analyze the RAWTocEntries to figure out what type of track track 1 is
var tocSynth = new Synthesize_DiscTOC_From_RawTOCEntries_Job(disc.RawTOCEntries);
tocSynth.Run();
// now build the sectors
int currBlobIndex = 0;
foreach (var session in mdsf.ParsedSession)
{
for (int i = session.StartTrack; i <= session.EndTrack; i++)
{
int relMSF = -1;
var track = mdsf.TOCEntries.FirstOrDefault(t => t.Point == i);
if (track == null)
{
break;
}
// ignore the info entries
if (track.Point == 0xA0 ||
track.Point == 0xA1 ||
track.Point == 0xA2)
{
continue;
}
// get the blob(s) for this track
// it's probably a safe assumption that there will be only one blob per track, but I'm still not 100% sure on this
var tr = mdsf.TOCEntries.FirstOrDefault(a => a.Point == i) ?? throw new MDSParseException("BLOB Error!");
#if true
if (tr.ImageFileNamePaths.Count == 0)
{
throw new MDSParseException("BLOB Error!");
}
#else // this is the worst use of lists and LINQ I've seen in this god-forsaken codebase, I hope for all our sakes that it's not a workaround for some race condition --yoshi
List <string> blobstrings = new List <string>();
foreach (var t in tr.ImageFileNamePaths)
{
if (!blobstrings.Contains(t))
{
blobstrings.Add(t);
}
}
var tBlobs = (from a in tr.ImageFileNamePaths
select a).ToList();
if (tBlobs.Count < 1)
{
throw new MDSParseException("BLOB Error!");
}
// is the currBlob valid for this track, or do we need to increment?
string bString = tBlobs.First();
#endif
IBlob mdfBlob = null;
// check for track pregap and create if necessary
// this is specified in the track extras block
if (track.ExtraBlock.Pregap > 0)
{
CUE.CueTrackType pregapTrackType = CUE.CueTrackType.Audio;
if (tocSynth.Result.TOCItems[1].IsData)
{
if (tocSynth.Result.Session1Format == SessionFormat.Type20_CDXA)
{
pregapTrackType = CUE.CueTrackType.Mode2_2352;
}
else if (tocSynth.Result.Session1Format == SessionFormat.Type10_CDI)
{
pregapTrackType = CUE.CueTrackType.CDI_2352;
}
else if (tocSynth.Result.Session1Format == SessionFormat.Type00_CDROM_CDDA)
{
pregapTrackType = CUE.CueTrackType.Mode1_2352;
}
}
for (int pre = 0; pre < track.ExtraBlock.Pregap; pre++)
{
relMSF++;
var ss_gap = new CUE.SS_Gap()
{
Policy = IN_DiscMountPolicy,
TrackType = pregapTrackType
};
disc._Sectors.Add(ss_gap);
int qRelMSF = pre - Convert.ToInt32(track.ExtraBlock.Pregap);
//tweak relMSF due to ambiguity/contradiction in yellowbook docs
if (!IN_DiscMountPolicy.CUE_PregapContradictionModeA)
{
qRelMSF++;
}
//setup subQ
byte ADR = 1; //absent some kind of policy for how to set it, this is a safe assumption:
ss_gap.sq.SetStatus(ADR, tocSynth.Result.TOCItems[1].Control);
ss_gap.sq.q_tno = BCD2.FromDecimal(1);
ss_gap.sq.q_index = BCD2.FromDecimal(0);
ss_gap.sq.AP_Timestamp = pre;
ss_gap.sq.Timestamp = qRelMSF;
//setup subP
ss_gap.Pause = true;
}
// pregap processing completed
}
// create track sectors
long currBlobOffset = track.TrackOffset;
for (long sector = session.StartSector; sector <= session.EndSector; sector++)
{
CUE.SS_Base sBase = null;
// get the current blob from the BlobIndex
Blob_RawFile currBlob = (Blob_RawFile)BlobIndex[currBlobIndex];
long currBlobLength = currBlob.Length;
long currBlobPosition = sector;
if (currBlobPosition == currBlobLength)
{
currBlobIndex++;
}
mdfBlob = disc.DisposableResources[currBlobIndex] as Blob_RawFile;
//int userSector = 2048;
switch (track.SectorSize)
{
case 2448:
sBase = new CUE.SS_2352()
{
Policy = IN_DiscMountPolicy
};
//userSector = 2352;
break;
case 2048:
default:
sBase = new CUE.SS_Mode1_2048()
{
Policy = IN_DiscMountPolicy
};
//userSector = 2048;
break;
//throw new Exception($"Not supported: Sector Size {track.SectorSize}");
}
// configure blob
sBase.Blob = mdfBlob;
sBase.BlobOffset = currBlobOffset;
currBlobOffset += track.SectorSize; // userSector;
// add subchannel data
relMSF++;
BCD2 tno, ino;
//this should actually be zero. im not sure if this is stored as BCD2 or not
tno = BCD2.FromDecimal(track.TrackNo);
//these are special values.. I think, taken from this:
//http://www.staff.uni-mainz.de/tacke/scsi/SCSI2-14.html
//the CCD will contain Points as decimal values except for these specially converted decimal values which should stay as BCD.
//Why couldn't they all be BCD? I don't know. I guess because BCD is inconvenient, but only A0 and friends have special meaning. It's confusing.
ino = BCD2.FromDecimal(track.Point);
if (track.Point == 0xA0)
{
ino.BCDValue = 0xA0;
}
else if (track.Point == 0xA1)
{
ino.BCDValue = 0xA1;
}
else if (track.Point == 0xA2)
{
ino.BCDValue = 0xA2;
}
// get ADR & Control from ADR_Control byte
byte adrc = Convert.ToByte(track.ADR_Control);
var Control = adrc & 0x0F;
var ADR = adrc >> 4;
var q = new SubchannelQ
{
q_status = SubchannelQ.ComputeStatus(ADR, (EControlQ)(Control & 0xF)),
q_tno = BCD2.FromDecimal(track.Point),
q_index = ino,
AP_Timestamp = disc._Sectors.Count,
Timestamp = relMSF - Convert.ToInt32(track.ExtraBlock.Pregap)
};
sBase.sq = q;
disc._Sectors.Add(sBase);
}
}
}
return(disc);
}
public void Run()
{
//params
var compiled = IN_CompileJob;
var context = compiled.IN_CueContext;
OUT_Disc = new Disc();
//generation state
int curr_index;
int curr_blobIndex = -1;
int curr_blobMSF = -1;
BlobInfo curr_blobInfo = null;
long curr_blobOffset = -1;
//mount all input files
MountBlobs();
//unhappily, we cannot determine the length of all the tracks without knowing the length of the files
//now that the files are mounted, we can figure the track lengths
AnalyzeTracks();
//loop from track 1 to 99
//(track 0 isnt handled yet, that's way distant work)
for (int t = 1; t < TrackInfos.Count; t++)
{
TrackInfo ti = TrackInfos[t];
CompiledCueTrack cct = ti.CompiledCueTrack;
//---------------------------------
//setup track pregap processing
//per "Example 05" on digitalx.org, pregap can come from index specification and pregap command
int specifiedPregapLength = cct.PregapLength.Sector;
int impliedPregapLength = cct.Indexes[1].FileMSF.Sector - cct.Indexes[0].FileMSF.Sector;
int totalPregapLength = specifiedPregapLength + impliedPregapLength;
//from now on we'll track relative timestamp and increment it continually
int relMSF = -totalPregapLength;
//read more at policies declaration
//if (!context.DiscMountPolicy.CUE_PauseContradictionModeA)
// relMSF += 1;
//---------------------------------
//---------------------------------
//generate sectors for this track.
//advance to the next file if needed
if (curr_blobIndex != cct.BlobIndex)
{
curr_blobIndex = cct.BlobIndex;
curr_blobOffset = 0;
curr_blobMSF = 0;
curr_blobInfo = BlobInfos[curr_blobIndex];
}
//work until the next track is reached, or the end of the current file is reached, depending on the track type
curr_index = 0;
for (; ; )
{
bool trackDone = false;
bool generateGap = false;
if (specifiedPregapLength > 0)
{
//if burning through a specified pregap, count it down
generateGap = true;
specifiedPregapLength--;
}
else
{
//if burning through the file, select the appropriate index by inspecting the next index and seeing if we've reached it
for (; ; )
{
if (curr_index == cct.Indexes.Count - 1)
break;
if (curr_blobMSF >= cct.Indexes[curr_index + 1].FileMSF.Sector)
{
curr_index++;
if (curr_index == 1)
{
//WE ARE NOW AT INDEX 1: generate the RawTOCEntry for this track
EmitRawTOCEntry(cct);
}
}
else break;
}
}
//select the track type for the subQ
//it's obviously the same as the main track type usually, but during a pregap it can be different
TrackInfo qTrack = ti;
int qRelMSF = relMSF;
if (curr_index == 0)
{
//tweak relMSF due to ambiguity/contradiction in yellowbook docs
if (!context.DiscMountPolicy.CUE_PregapContradictionModeA)
qRelMSF++;
//[IEC10149] says there's two "intervals" of a pregap.
//mednafen's pseudocode interpretation of this:
//if this is a data track and the previous track was not data, the last 150 sectors of the pregap match this track and the earlier sectors (at least 75) math the previous track
//I agree, so let's do it that way
if (t != 1 && cct.TrackType != CueTrackType.Audio && TrackInfos[t - 1].CompiledCueTrack.TrackType == CueTrackType.Audio)
{
if (relMSF < -150)
{
qTrack = TrackInfos[t - 1];
}
}
}
//generate the right kind of sector synth for this track
SS_Base ss = null;
if (generateGap)
{
var ss_gap = new SS_Gap();
ss_gap.TrackType = qTrack.CompiledCueTrack.TrackType;
ss = ss_gap;
}
else
{
int sectorSize = int.MaxValue;
switch (qTrack.CompiledCueTrack.TrackType)
{
case CueTrackType.Audio:
case CueTrackType.CDI_2352:
case CueTrackType.Mode1_2352:
case CueTrackType.Mode2_2352:
ss = new SS_2352();
sectorSize = 2352;
break;
case CueTrackType.Mode1_2048:
ss = new SS_Mode1_2048();
sectorSize = 2048;
break;
default:
case CueTrackType.Mode2_2336:
throw new InvalidOperationException("Not supported: " + cct.TrackType);
}
ss.Blob = curr_blobInfo.Blob;
ss.BlobOffset = curr_blobOffset;
curr_blobOffset += sectorSize;
curr_blobMSF++;
}
ss.Policy = context.DiscMountPolicy;
//setup subQ
byte ADR = 1; //absent some kind of policy for how to set it, this is a safe assumption:
ss.sq.SetStatus(ADR, (EControlQ)(int)qTrack.CompiledCueTrack.Flags);
ss.sq.q_tno = BCD2.FromDecimal(cct.Number);
ss.sq.q_index = BCD2.FromDecimal(curr_index);
ss.sq.AP_Timestamp = new Timestamp(OUT_Disc.Sectors.Count);
ss.sq.Timestamp = new Timestamp(qRelMSF);
//setup subP
if (curr_index == 0)
ss.Pause = true;
OUT_Disc.Sectors.Add(ss);
relMSF++;
if (cct.IsFinalInFile)
{
//sometimes, break when the file is exhausted
if (curr_blobOffset >= curr_blobInfo.Length)
trackDone = true;
}
else
{
//other times, break when the track is done
//(this check is safe because it's not the final track overall if it's not the final track in a file)
if (curr_blobMSF >= TrackInfos[t + 1].CompiledCueTrack.Indexes[0].FileMSF.Sector)
trackDone = true;
}
if (trackDone)
break;
}
//---------------------------------
//gen postgap sectors
int specifiedPostgapLength = cct.PostgapLength.Sector;
for (int s = 0; s < specifiedPostgapLength; s++)
{
var ss = new SS_Gap();
ss.TrackType = cct.TrackType; //TODO - old track type in some < -150 cases?
//-subq-
byte ADR = 1;
ss.sq.SetStatus(ADR, (EControlQ)(int)cct.Flags);
ss.sq.q_tno = BCD2.FromDecimal(cct.Number);
ss.sq.q_index = BCD2.FromDecimal(curr_index);
ss.sq.AP_Timestamp = new Timestamp(OUT_Disc.Sectors.Count);
ss.sq.Timestamp = new Timestamp(relMSF);
//-subP-
//always paused--is this good enough?
ss.Pause = true;
OUT_Disc.Sectors.Add(ss);
relMSF++;
}
} //end track loop
//add RawTOCEntries A0 A1 A2 to round out the TOC
var TOCMiscInfo = new Synthesize_A0A1A2_Job {
IN_FirstRecordedTrackNumber = IN_CompileJob.OUT_CompiledDiscInfo.FirstRecordedTrackNumber,
IN_LastRecordedTrackNumber = IN_CompileJob.OUT_CompiledDiscInfo.LastRecordedTrackNumber,
IN_Session1Format = IN_CompileJob.OUT_CompiledDiscInfo.SessionFormat,
IN_LeadoutTimestamp = new Timestamp(OUT_Disc.Sectors.Count) //do we need a +150?
};
TOCMiscInfo.Run(OUT_Disc.RawTOCEntries);
//TODO - generate leadout, or delegates at least
//blech, old crap, maybe
//OUT_Disc.Structure.Synthesize_TOCPointsFromSessions();
//FinishLog();
}