/// <summary>
/// bit位读取
/// </summary>
/// <param name="message_Bit">需要读取的类型</param>
/// <param name="location">起始位置</param>
/// <param name="number">读取个数需要少于255</param>
/// <returns></returns>
protected virtual byte[] Read_bit(message_bit message_Bit, int location, byte number)
{
string length = "0c00";//请求长度真实数据是000C 转换成10进制是13个字节
if (message_Bit != message_bit.Y)
{
string Data1 = $"{Secondary_head}{Station_number}{length}{Time}{Batch_read_command_bit}{Int_to_String(location)}{Convert.ToString((int)message_Bit, 16)}{ number_to_String(number)}{End}";//获取默认头部帧
return(BytesLHToBytesHL(Data1));
}
int len = 0;//Y点读取位置
switch (location.ToString().Length)
{
case 1:
len = 0;
break;
case 2:
len = Convert.ToInt32(location.ToString().Remove(1, 1)) / 2;
break;
case 3:
len = Convert.ToInt32(location.ToString().Remove(1, 2)) / 2;
break;
}
string Data = $"{Secondary_head}{Station_number}{length}{Time}{Batch_read_command_bit}{Int_to_String(len*10,true)}{Convert.ToString((int)message_Bit, 16)}10{End}";//获取默认头部帧
return(BytesLHToBytesHL(Data));
}
/// <summary>
/// 写入多线圈
/// </summary>
/// <param name="message_Bit">需要写入的软软件类型</param>
/// <param name="address">起始地址</param>
/// <param name="coil">要写入状态的bool数组长度决定了要写入的个数</param>
/// <returns></returns>
public Operating <bool[]> write_multi_Bool(message_bit message_Bit, byte address, bool[] coil)
{
try
{
mutex.WaitOne(3000);
if (this.Socket_ready)
{
this.socket.Send(this.Write_multi_bit(message_Bit, address, coil)); //发送报文
byte[] Data = new byte[50];
this.socket.Receive(Data); //接收回复
mutex.ReleaseMutex();
return(new Operating <bool[]>()
{
Content = coil, ErrorCode = "0", IsSuccess = true
});
}
else
{
throw new AggregateException("未连接设备");
}
}
catch (Exception e)
{
mutex.ReleaseMutex();
return(Err <bool[]>(e));
}
}
/// <summary>
/// 读取多个位
/// </summary>
/// <param name="message_Bit">需要读取的软元件</param>
/// <param name="address">起始地址</param>
/// <param name="number">读取个数</param>
/// <returns></returns>
public Operating <bool[]> Read_Bool(message_bit message_Bit, int address, byte number)
{
try
{
mutex.WaitOne(3000);
if (this.Socket_ready)
{
this.socket.Send(this.Read_bit(message_Bit, address, number)); //发送报文
byte[] Data = new byte[50];
this.socket.Receive(Data, SocketFlags.None); //接收回复
byte[] Data_1 = new byte[Data[7] - 2];
for (int i = 0; i < (Data[7] - 2); i++)
{
Data_1[i] = Data[11 + i];
}
mutex.ReleaseMutex();
return(new Operating <bool[]>()
{
Content = Byet_to_bool(Data_1, number), ErrorCode = "0", IsSuccess = true
});
}
else
{
throw new AggregateException("未连接设备");
}
}
catch (Exception e)
{
mutex.ReleaseMutex();
return(Err <bool[]>(e));
}
}
/// <summary>
/// 读取一个位类型
/// </summary>
/// <param name="message_Bit">需要读取的软元件</param>
/// <param name="address">起始地址</param>
/// <returns></returns>
public Operating <bool> Read_Bool(message_bit message_Bit, int address)
{
try
{
mutex.WaitOne(3000);
if (this.Socket_ready)
{
var XA = this.Read_bit(message_Bit, address, 1);
this.socket.Send(this.Read_bit(message_Bit, address, 1)); //发送报文
byte[] Data = new byte[50];
this.socket.Receive(Data); //接收回复
mutex.ReleaseMutex();
return(new Operating <bool>()
{
Content = Analysis(Data, address), ErrorCode = "0", IsSuccess = true
});
}
else
{
throw new AggregateException("未连接设备");
}
}
catch (Exception e)
{
mutex.ReleaseMutex();
return(Err <bool>(e));
}
}
/// <summary>
/// 多线圈写入
/// </summary>
/// <param name="message_Bit">需要写入的类型</param>
/// <param name="location">起始位置</param>
/// <param name="number">需要写入的数据</param>
/// <returns></returns>
protected virtual byte[] Write_multi_bit(message_bit message_Bit, int location, bool[] number)
{
int len = number.Length;
string length = $"{number_to_String(Convert.ToByte((number.Length % 2 == 1 ? number.Length + 1 : number.Length )/2+ 12))}00"; //请求长度真实数据标准12个加上要写入的长度等于真实长度
string Data = $"{Secondary_head}{Station_number}{length}{Time}{Batch_write_command_bit}{Int_to_String(location)}{Convert.ToString((int)message_Bit, 16)}{number_to_String(Convert.ToByte(len))}{End}{bool_to_string(number)}"; //获取默认头部帧
return(BytesLHToBytesHL(Data));
}
/// <summary>
/// bit位写入
/// </summary>
/// <param name="message_Bit">需要写入的类型</param>
/// <param name="location">起始位置</param>
/// <param name="number">需要写入的数据</param>
/// <returns></returns>
protected virtual byte[] Write_bit(message_bit message_Bit, int location, bool number)
{
int len = 1;
string length = $"{number_to_String(Convert.ToByte(len + 12))}00";//请求长度真实数据标准12个加上要写入的长度等于真实长度
if (message_Bit != message_bit.Y || location < 10)
{
string Data = $"{Secondary_head}{Station_number}{length}{Time}{Batch_write_command_bit}{Int_to_String(location)}{Convert.ToString((int)message_Bit, 16)}{number_to_String(Convert.ToByte(len))}{End}{bool_to_string(new bool[] { number })}";//获取默认头部帧
return(BytesLHToBytesHL(Data));
}
var DATQ = Convert.ToInt32(location.ToString(), 8); //Q系列不需要装换8进制
string Data1 = $"{Secondary_head}{Station_number}{length}{Time}{Batch_write_command_bit}{Int_to_String(DATQ)}{Convert.ToString((int)message_Bit, 16)}{number_to_String(Convert.ToByte(len))}{End}{bool_to_string(new bool[] { number })}"; //获取默认头部帧
return(BytesLHToBytesHL(Data1));
}
