public static void Test4()
{
com.epl.geometry.Polyline poly = new com.epl.geometry.Polyline();
poly.StartPath(0, System.Math.Sqrt(0.0));
poly.LineTo(0, System.Math.Sqrt(1.0));
poly.StartPath(0, System.Math.Sqrt(1.0));
poly.LineTo(0, System.Math.Sqrt(2.0));
poly.StartPath(0, System.Math.Sqrt(2.0));
poly.LineTo(0, System.Math.Sqrt(3.0));
poly.StartPath(0, System.Math.Sqrt(3.0));
poly.LineTo(0, System.Math.Sqrt(4.0));
poly.StartPath(0, System.Math.Sqrt(4.0));
poly.LineTo(0, System.Math.Sqrt(5.0));
poly.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 1, 0, System.Math.Sqrt(1.0));
poly.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 8, 0, System.Math.Sqrt(4.0));
poly.InterpolateAttributes(com.epl.geometry.VertexDescription.Semantics.M, 0, 1, 4, 0);
NUnit.Framework.Assert.IsTrue(com.epl.geometry.NumberUtils.IsNaN(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 0, 0)));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 1, 0) == System.Math.Sqrt(1.0));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 2, 0) == System.Math.Sqrt(1.0));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 3, 0) == System.Math.Sqrt(2.0));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 4, 0) == System.Math.Sqrt(2.0));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 5, 0) == System.Math.Sqrt(3.0));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 6, 0) == System.Math.Sqrt(3.0));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 7, 0) == System.Math.Sqrt(4.0));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 8, 0) == System.Math.Sqrt(4.0));
NUnit.Framework.Assert.IsTrue(com.epl.geometry.NumberUtils.IsNaN(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 9, 0)));
}
public static void Test3()
{
com.epl.geometry.Polyline poly = new com.epl.geometry.Polyline();
poly.StartPath(0, System.Math.Sqrt(0.0));
poly.LineTo(0, System.Math.Sqrt(5.0));
poly.StartPath(0, System.Math.Sqrt(8.0));
poly.LineTo(0, System.Math.Sqrt(10.0));
poly.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 0, 0, System.Math.Sqrt(3.0));
poly.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 2, 0, System.Math.Sqrt(5.0));
poly.InterpolateAttributes(com.epl.geometry.VertexDescription.Semantics.M, 0, 0, 1, 0);
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 0, 0) == System.Math.Sqrt(3.0));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 1, 0) == System.Math.Sqrt(5.0));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 2, 0) == System.Math.Sqrt(5.0));
}
public static void Test1()
{
com.epl.geometry.Polyline poly = new com.epl.geometry.Polyline();
poly.StartPath(0, 0);
poly.LineTo(0, 1.0 / 3.0);
poly.LineTo(0, 2.0 / 3.0);
poly.LineTo(0, 4.0 / 3.0);
poly.LineTo(0, System.Math.Sqrt(6.0));
poly.LineTo(0, System.Math.Sqrt(7.0));
poly.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 0, 0, 3);
poly.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 1, 0, 5);
poly.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 2, 0, 7);
poly.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 5, 0, 11);
poly.InterpolateAttributes(com.epl.geometry.VertexDescription.Semantics.M, 0, 1, 0, 1);
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 0, 0) == 3);
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 1, 0) == 5);
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 2, 0) == 7);
NUnit.Framework.Assert.IsTrue(com.epl.geometry.NumberUtils.IsNaN(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 3, 0)));
NUnit.Framework.Assert.IsTrue(com.epl.geometry.NumberUtils.IsNaN(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 4, 0)));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 5, 0) == 11);
poly.InterpolateAttributes(com.epl.geometry.VertexDescription.Semantics.M, 0, 1, 0, 2);
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 0, 0) == 3);
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 1, 0) == 5);
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 2, 0) == 7);
NUnit.Framework.Assert.IsTrue(com.epl.geometry.NumberUtils.IsNaN(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 3, 0)));
NUnit.Framework.Assert.IsTrue(com.epl.geometry.NumberUtils.IsNaN(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 4, 0)));
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 5, 0) == 11);
poly.InterpolateAttributes(com.epl.geometry.VertexDescription.Semantics.M, 0, 2, 0, 5);
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 0, 0) == 3);
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 1, 0) == 5);
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 2, 0) == 7);
double a3 = poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 3, 0);
NUnit.Framework.Assert.IsTrue(a3 > 7 && a3 < 11);
double a4 = poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 4, 0);
NUnit.Framework.Assert.IsTrue(a4 > a3 && a4 < 11);
NUnit.Framework.Assert.IsTrue(poly.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 5, 0) == 11);
poly.StartPath(0, System.Math.Sqrt(8.0));
poly.LineTo(0, System.Math.Sqrt(10.0));
poly.LineTo(0, System.Math.Sqrt(11.0));
}
/// <exception cref="com.fasterxml.jackson.core.JsonParseException"/>
/// <exception cref="System.IO.IOException"/>
internal virtual bool TestPolyline()
{
bool bAnswer = true;
com.epl.geometry.Polyline polyline = new com.epl.geometry.Polyline();
polyline.StartPath(-97.06138, 32.837);
polyline.LineTo(-97.06133, 32.836);
polyline.LineTo(-97.06124, 32.834);
polyline.LineTo(-97.06127, 32.832);
polyline.StartPath(-97.06326, 32.759);
polyline.LineTo(-97.06298, 32.755);
{
com.fasterxml.jackson.core.JsonParser polylinePathsWgs84Parser = factory.CreateParser(com.epl.geometry.GeometryEngine.GeometryToJson(spatialReferenceWGS84, polyline));
com.epl.geometry.MapGeometry mPolylineWGS84MP = com.epl.geometry.GeometryEngine.JsonToGeometry(polylinePathsWgs84Parser);
NUnit.Framework.Assert.IsTrue(polyline.GetPointCount() == ((com.epl.geometry.Polyline)mPolylineWGS84MP.GetGeometry()).GetPointCount());
NUnit.Framework.Assert.IsTrue(polyline.GetPoint(0).GetX() == ((com.epl.geometry.Polyline)mPolylineWGS84MP.GetGeometry()).GetPoint(0).GetX());
NUnit.Framework.Assert.IsTrue(polyline.GetPoint(0).GetY() == ((com.epl.geometry.Polyline)mPolylineWGS84MP.GetGeometry()).GetPoint(0).GetY());
NUnit.Framework.Assert.IsTrue(polyline.GetPathCount() == ((com.epl.geometry.Polyline)mPolylineWGS84MP.GetGeometry()).GetPathCount());
NUnit.Framework.Assert.IsTrue(polyline.GetSegmentCount() == ((com.epl.geometry.Polyline)mPolylineWGS84MP.GetGeometry()).GetSegmentCount());
NUnit.Framework.Assert.IsTrue(polyline.GetSegmentCount(0) == ((com.epl.geometry.Polyline)mPolylineWGS84MP.GetGeometry()).GetSegmentCount(0));
NUnit.Framework.Assert.IsTrue(polyline.GetSegmentCount(1) == ((com.epl.geometry.Polyline)mPolylineWGS84MP.GetGeometry()).GetSegmentCount(1));
int lastIndex = polyline.GetPointCount() - 1;
NUnit.Framework.Assert.IsTrue(polyline.GetPoint(lastIndex).GetX() == ((com.epl.geometry.Polyline)mPolylineWGS84MP.GetGeometry()).GetPoint(lastIndex).GetX());
NUnit.Framework.Assert.IsTrue(polyline.GetPoint(lastIndex).GetY() == ((com.epl.geometry.Polyline)mPolylineWGS84MP.GetGeometry()).GetPoint(lastIndex).GetY());
NUnit.Framework.Assert.IsTrue(spatialReferenceWGS84.GetID() == mPolylineWGS84MP.GetSpatialReference().GetID());
if (!CheckResultSpatialRef(mPolylineWGS84MP, 4326, 0))
{
bAnswer = false;
}
}
{
com.epl.geometry.Polyline p = new com.epl.geometry.Polyline();
p.AddAttribute(com.epl.geometry.VertexDescription.Semantics.Z);
p.AddAttribute(com.epl.geometry.VertexDescription.Semantics.M);
string s = com.epl.geometry.GeometryEngine.GeometryToJson(spatialReferenceWebMerc1, p);
NUnit.Framework.Assert.IsTrue(s.Equals("{\"hasZ\":true,\"hasM\":true,\"paths\":[],\"spatialReference\":{\"wkid\":102100,\"latestWkid\":3857}}"));
p.StartPath(0, 0);
p.LineTo(0, 1);
p.StartPath(2, 2);
p.LineTo(3, 3);
p.SetAttribute(com.epl.geometry.VertexDescription.Semantics.Z, 0, 0, 3);
p.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 1, 0, 5);
s = com.epl.geometry.GeometryEngine.GeometryToJson(spatialReferenceWebMerc1, p);
NUnit.Framework.Assert.IsTrue(s.Equals("{\"hasZ\":true,\"hasM\":true,\"paths\":[[[0,0,3,null],[0,1,0,5]],[[2,2,0,null],[3,3,0,null]]],\"spatialReference\":{\"wkid\":102100,\"latestWkid\":3857}}"));
}
{
string paths = "{\"hasZ\" : true, \"paths\" : [ [ [0.0, 0.0,3], [0, 10.0,3], [10.0, 10.0,3, 6666], [10.0, 0.0,3, 6666] ], [ [1.0, 1,3], [1.0, 9.0,3], [9.0, 9.0,3], [1.0, 9.0,3] ] ], \"spatialReference\" : {\"wkid\" : 4326}, \"hasM\" : false}";
com.epl.geometry.MapGeometry mapGeometry = com.epl.geometry.GeometryEngine.JsonToGeometry(factory.CreateParser(paths));
com.epl.geometry.Polyline p = (com.epl.geometry.Polyline)mapGeometry.GetGeometry();
NUnit.Framework.Assert.IsTrue(p.GetPathCount() == 2);
int count = p.GetPathCount();
NUnit.Framework.Assert.IsTrue(p.GetPointCount() == 8);
NUnit.Framework.Assert.IsTrue(p.HasAttribute(com.epl.geometry.VertexDescription.Semantics.Z));
NUnit.Framework.Assert.IsTrue(!p.HasAttribute(com.epl.geometry.VertexDescription.Semantics.M));
double z = p.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.Z, 0, 0);
NUnit.Framework.Assert.IsTrue(z == 3);
double length = p.CalculateLength2D();
NUnit.Framework.Assert.IsTrue(System.Math.Abs(length - 54.0) <= 0.001);
com.epl.geometry.SpatialReference spatial_reference = mapGeometry.GetSpatialReference();
NUnit.Framework.Assert.IsTrue(spatial_reference.GetID() == 4326);
}
return(bAnswer);
}
public static void TestEditShape__()
{
{
// Single part polygon
com.epl.geometry.Polygon poly = new com.epl.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(14, 15);
poly.LineTo(10, 11);
com.epl.geometry.EditShape editShape = new com.epl.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
com.epl.geometry.Polygon poly2 = (com.epl.geometry.Polygon)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Two part poly
com.epl.geometry.Polygon poly = new com.epl.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(14, 15);
poly.LineTo(10, 11);
poly.StartPath(100, 10);
poly.LineTo(100, 12);
poly.LineTo(14, 150);
poly.LineTo(10, 101);
poly.LineTo(100, 11);
com.epl.geometry.EditShape editShape = new com.epl.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
com.epl.geometry.Polygon poly2 = (com.epl.geometry.Polygon)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Single part polyline
com.epl.geometry.Polyline poly = new com.epl.geometry.Polyline();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(14, 15);
poly.LineTo(10, 11);
com.epl.geometry.EditShape editShape = new com.epl.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
com.epl.geometry.Polyline poly2 = (com.epl.geometry.Polyline)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Two part poly
com.epl.geometry.Polyline poly = new com.epl.geometry.Polyline();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(14, 15);
poly.LineTo(10, 11);
poly.StartPath(100, 10);
poly.LineTo(100, 12);
poly.LineTo(14, 150);
poly.LineTo(10, 101);
poly.LineTo(100, 11);
com.epl.geometry.EditShape editShape = new com.epl.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
com.epl.geometry.Polyline poly2 = (com.epl.geometry.Polyline)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Five part poly. Close one of parts to test if it works.
com.epl.geometry.Polyline poly = new com.epl.geometry.Polyline();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(14, 15);
poly.LineTo(10, 11);
poly.StartPath(100, 10);
poly.LineTo(100, 12);
poly.LineTo(14, 150);
poly.LineTo(10, 101);
poly.LineTo(100, 11);
poly.StartPath(1100, 101);
poly.LineTo(1300, 132);
poly.LineTo(144, 150);
poly.LineTo(106, 1051);
poly.LineTo(1600, 161);
poly.StartPath(100, 190);
poly.LineTo(1800, 192);
poly.LineTo(184, 8150);
poly.LineTo(1080, 181);
poly.StartPath(1030, 10);
poly.LineTo(1300, 132);
poly.LineTo(314, 3150);
poly.LineTo(310, 1301);
poly.LineTo(3100, 311);
com.epl.geometry.EditShape editShape = new com.epl.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
editShape.SetClosedPath(editShape.GetNextPath(editShape.GetFirstPath(geom)), true);
((com.epl.geometry.MultiPathImpl)poly._getImpl()).ClosePathWithLine(1);
com.epl.geometry.Polyline poly2 = (com.epl.geometry.Polyline)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Test erase
com.epl.geometry.Polyline poly = new com.epl.geometry.Polyline();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(314, 3150);
poly.LineTo(310, 1301);
poly.LineTo(3100, 311);
com.epl.geometry.EditShape editShape = new com.epl.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
int vertex = editShape.GetFirstVertex(editShape.GetFirstPath(geom));
vertex = editShape.RemoveVertex(vertex, true);
vertex = editShape.GetNextVertex(vertex);
editShape.RemoveVertex(vertex, true);
com.epl.geometry.Polyline poly2 = (com.epl.geometry.Polyline)editShape.GetGeometry(geom);
poly.SetEmpty();
poly.StartPath(10, 12);
poly.LineTo(310, 1301);
poly.LineTo(3100, 311);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Test erase
com.epl.geometry.Polygon poly = new com.epl.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 12);
poly.LineTo(314, 3150);
poly.LineTo(310, 1301);
poly.LineTo(3100, 311);
com.epl.geometry.EditShape editShape = new com.epl.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
int vertex = editShape.GetFirstVertex(editShape.GetFirstPath(geom));
vertex = editShape.RemoveVertex(vertex, true);
vertex = editShape.GetNextVertex(vertex);
editShape.RemoveVertex(vertex, true);
com.epl.geometry.Polygon poly2 = (com.epl.geometry.Polygon)editShape.GetGeometry(geom);
poly.SetEmpty();
poly.StartPath(10, 12);
poly.LineTo(310, 1301);
poly.LineTo(3100, 311);
NUnit.Framework.Assert.IsTrue(poly.Equals(poly2));
}
{
// Test Filter Close Points
com.epl.geometry.Polygon poly = new com.epl.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 10.001);
poly.LineTo(10.001, 10);
com.epl.geometry.EditShape editShape = new com.epl.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
editShape.FilterClosePoints(0.002, true, false);
com.epl.geometry.Polygon poly2 = (com.epl.geometry.Polygon)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly2.IsEmpty());
}
{
// Test Filter Close Points
com.epl.geometry.Polygon poly = new com.epl.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 10.0025);
poly.LineTo(11.0, 10);
com.epl.geometry.EditShape editShape = new com.epl.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
editShape.FilterClosePoints(0.002, true, false);
com.epl.geometry.Polygon poly2 = (com.epl.geometry.Polygon)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(!poly2.IsEmpty());
}
{
// Test Filter Close Points
com.epl.geometry.Polygon poly = new com.epl.geometry.Polygon();
poly.StartPath(10, 10);
poly.LineTo(10, 10.001);
poly.LineTo(11.0, 10);
com.epl.geometry.EditShape editShape = new com.epl.geometry.EditShape();
int geom = editShape.AddGeometry(poly);
editShape.FilterClosePoints(0.002, true, false);
com.epl.geometry.Polygon poly2 = (com.epl.geometry.Polygon)editShape.GetGeometry(geom);
NUnit.Framework.Assert.IsTrue(poly2.IsEmpty());
}
{
// Test attribute splitting 1
com.epl.geometry.Polyline polyline = new com.epl.geometry.Polyline();
polyline.StartPath(0, 0);
polyline.LineTo(1, 1);
polyline.LineTo(2, 2);
polyline.LineTo(3, 3);
polyline.LineTo(4, 4);
polyline.StartPath(5, 5);
polyline.LineTo(6, 6);
polyline.LineTo(7, 7);
polyline.LineTo(8, 8);
polyline.LineTo(9, 9);
polyline.AddAttribute(com.epl.geometry.VertexDescription.Semantics.Z);
polyline.SetAttribute(com.epl.geometry.VertexDescription.Semantics.Z, 0, 0, 4);
polyline.SetAttribute(com.epl.geometry.VertexDescription.Semantics.Z, 1, 0, 8);
polyline.SetAttribute(com.epl.geometry.VertexDescription.Semantics.Z, 2, 0, 12);
polyline.SetAttribute(com.epl.geometry.VertexDescription.Semantics.Z, 3, 0, 16);
polyline.SetAttribute(com.epl.geometry.VertexDescription.Semantics.Z, 4, 0, 20);
polyline.SetAttribute(com.epl.geometry.VertexDescription.Semantics.Z, 5, 0, 22);
polyline.SetAttribute(com.epl.geometry.VertexDescription.Semantics.Z, 6, 0, 26);
polyline.SetAttribute(com.epl.geometry.VertexDescription.Semantics.Z, 7, 0, 30);
polyline.SetAttribute(com.epl.geometry.VertexDescription.Semantics.Z, 8, 0, 34);
polyline.SetAttribute(com.epl.geometry.VertexDescription.Semantics.Z, 9, 0, 38);
com.epl.geometry.EditShape shape = new com.epl.geometry.EditShape();
int geometry = shape.AddGeometry(polyline);
com.epl.geometry.AttributeStreamOfInt32 vertex_handles = new com.epl.geometry.AttributeStreamOfInt32(0);
for (int path = shape.GetFirstPath(geometry); path != -1; path = shape.GetNextPath(path))
{
for (int vertex = shape.GetFirstVertex(path); vertex != -1; vertex = shape.GetNextVertex(vertex))
{
if (vertex != shape.GetLastVertex(path))
{
vertex_handles.Add(vertex);
}
}
}
double[] t = new double[1];
for (int i = 0; i < vertex_handles.Size(); i++)
{
int vertex = vertex_handles.Read(i);
t[0] = 0.5;
shape.SplitSegment(vertex, t, 1);
}
com.epl.geometry.Polyline chopped_polyline = (com.epl.geometry.Polyline)shape.GetGeometry(geometry);
NUnit.Framework.Assert.IsTrue(chopped_polyline.GetPointCount() == 18);
double att_ = 4;
for (int i_1 = 0; i_1 < 18; i_1++)
{
double att = chopped_polyline.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.Z, i_1, 0);
NUnit.Framework.Assert.IsTrue(att == att_);
att_ += 2;
}
}
{
// Test attribute splitting 2
com.epl.geometry.Polyline line1 = new com.epl.geometry.Polyline();
com.epl.geometry.Polyline line2 = new com.epl.geometry.Polyline();
line1.AddAttribute(com.epl.geometry.VertexDescription.Semantics.M);
line2.AddAttribute(com.epl.geometry.VertexDescription.Semantics.M);
line1.StartPath(0, 0);
line1.LineTo(10, 10);
line2.StartPath(10, 0);
line2.LineTo(0, 10);
line1.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 0, 0, 7);
line1.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 1, 0, 17);
line2.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 0, 0, 5);
line2.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 1, 0, 15);
com.epl.geometry.EditShape shape = new com.epl.geometry.EditShape();
int g1 = shape.AddGeometry(line1);
int g2 = shape.AddGeometry(line2);
com.epl.geometry.CrackAndCluster.Execute(shape, 0.001, null, true);
com.epl.geometry.Polyline chopped_line1 = (com.epl.geometry.Polyline)shape.GetGeometry(g1);
com.epl.geometry.Polyline chopped_line2 = (com.epl.geometry.Polyline)shape.GetGeometry(g2);
double att1 = chopped_line1.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 1, 0);
double att2 = chopped_line2.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 1, 0);
NUnit.Framework.Assert.IsTrue(att1 == 12);
NUnit.Framework.Assert.IsTrue(att2 == 10);
}
{
// Test attribute splitting 3
com.epl.geometry.Polygon polygon = new com.epl.geometry.Polygon();
polygon.AddAttribute(com.epl.geometry.VertexDescription.Semantics.M);
polygon.StartPath(0, 0);
polygon.LineTo(0, 10);
polygon.LineTo(10, 10);
polygon.LineTo(10, 0);
polygon.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 0, 0, 7);
polygon.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 1, 0, 17);
polygon.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 2, 0, 23);
polygon.SetAttribute(com.epl.geometry.VertexDescription.Semantics.M, 3, 0, 43);
com.epl.geometry.EditShape shape = new com.epl.geometry.EditShape();
int geometry = shape.AddGeometry(polygon);
com.epl.geometry.AttributeStreamOfInt32 vertex_handles = new com.epl.geometry.AttributeStreamOfInt32(0);
int start_v = shape.GetFirstVertex(shape.GetFirstPath(geometry));
int v = start_v;
do
{
vertex_handles.Add(v);
v = shape.GetNextVertex(v);
}while (v != start_v);
double[] t = new double[1];
for (int i = 0; i < vertex_handles.Size(); i++)
{
int v1 = vertex_handles.Read(i);
t[0] = 0.5;
shape.SplitSegment(v1, t, 1);
}
com.epl.geometry.Polygon cut_polygon = (com.epl.geometry.Polygon)shape.GetGeometry(geometry);
NUnit.Framework.Assert.IsTrue(cut_polygon.GetPointCount() == 8);
com.epl.geometry.Point2D pt0 = cut_polygon.GetXY(0);
double a0 = cut_polygon.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 0, 0);
NUnit.Framework.Assert.IsTrue(a0 == 25);
com.epl.geometry.Point2D pt1 = cut_polygon.GetXY(1);
double a1 = cut_polygon.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 1, 0);
NUnit.Framework.Assert.IsTrue(a1 == 7);
com.epl.geometry.Point2D pt2 = cut_polygon.GetXY(2);
double a2 = cut_polygon.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 2, 0);
NUnit.Framework.Assert.IsTrue(a2 == 12);
com.epl.geometry.Point2D pt3 = cut_polygon.GetXY(3);
double a3 = cut_polygon.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 3, 0);
NUnit.Framework.Assert.IsTrue(a3 == 17);
com.epl.geometry.Point2D pt4 = cut_polygon.GetXY(4);
double a4 = cut_polygon.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 4, 0);
NUnit.Framework.Assert.IsTrue(a4 == 20);
com.epl.geometry.Point2D pt5 = cut_polygon.GetXY(5);
double a5 = cut_polygon.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 5, 0);
NUnit.Framework.Assert.IsTrue(a5 == 23);
com.epl.geometry.Point2D pt6 = cut_polygon.GetXY(6);
double a6 = cut_polygon.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 6, 0);
NUnit.Framework.Assert.IsTrue(a6 == 33);
com.epl.geometry.Point2D pt7 = cut_polygon.GetXY(7);
double a7 = cut_polygon.GetAttributeAsDbl(com.epl.geometry.VertexDescription.Semantics.M, 7, 0);
NUnit.Framework.Assert.IsTrue(a7 == 43);
}
}