public void Populate_EXCEL_DesignTables(clsFiles Files_In, clsProject Project_In,
clsOpCond OpCond_In, clsDB DB_In, string FilePath_In)
//============================================================================================
{
CloseExcelFiles();
// RADIAL:
// -------
Populate_tblMapping_Radial(Project_In, OpCond_In, DB_In); //....Software variable value field.
Populate_EXCEL_Radial(Files_In, Project_In, DB_In, FilePath_In); //....Design Table.
// BLANK Assy:
// -----------
Populate_tblMapping_Blank(Project_In, DB_In);
Populate_EXCEL_BlankAssy(Files_In, Project_In, DB_In, FilePath_In);
// SEAL:
// -----
if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Seal ||
Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Seal)
{
Populate_tblMapping_Seal(Project_In, DB_In);
Populate_EXCEL_Seal(Files_In, Project_In, DB_In, FilePath_In);
}
// TL THRUST BEARING:
// ------------------
if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Thrust_Bearing_TL ||
Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Thrust_Bearing_TL)
{
Populate_tblMapping_TL_TB(Project_In, DB_In);
Populate_EXCEL_TL_TB(Files_In, Project_In, DB_In, FilePath_In);
}
// THRUST BEARING ASSY:
// --------------------
if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Thrust_Bearing_TL ||
Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Thrust_Bearing_TL)
{
Populate_tblMapping_TB_Assy(Project_In, DB_In);
Populate_EXCEL_TB_Assy(Files_In, Project_In, DB_In, FilePath_In);
}
// COMPLETE ASSY:
// --------------
Populate_tblMapping_Complete(Project_In, OpCond_In, DB_In);
Populate_EXCEL_CompleteAssy(Files_In, Project_In, DB_In, FilePath_In);
// Solid Works Files.
// ------------------
CreateSWFiles(Project_In, Files_In, FilePath_In);
}
private string[] mDwg_Title_Suffix = new string[8]; //....1-based
#endregion
#region "CLASS METHODS:"
//----------------------
////public void PopulateAndMove_SWFiles_ProjectFolder(clsFiles Files_In, clsProject Project_In,
//// clsOpCond OpCond_In, clsDB DB_In, string FilePath_In)
//////====================================================================================================
////{
//// //....SWFiles - Design tables, Model & Drawing files.
//// //
//// PopulateAndMove_DesignTables(Files_In, Project_In, OpCond_In, DB_In, FilePath_In);
//// CopyAndMove_SW_Model_Dwg_Files(Project_In, Files_In, FilePath_In);
////}
#region "DESIGN TABLES POPULATION:"
private void PopulateAndMove_DesignTables(clsFiles Files_In, clsProject Project_In,
clsOpCond OpCond_In, clsDB DB_In, string FilePath_In)
//===============================================================================================
{
//....This routine copies the design table templates to the project design tables, populates them
//........and places them in the given project folder.
Close_DesignTables();
// RADIAL:
// -------
Populate_tblMapping_Radial(Project_In, OpCond_In, DB_In); //....Software variable value field.
PopulateAndMove_DT_Radial(Files_In, Project_In, DB_In, FilePath_In); //....Design Table.
// BLANK Assy:
// -----------
Populate_tblMapping_Blank(Project_In, DB_In);
PopulateAndMove_DT_BlankAssy(Files_In, Project_In, DB_In, FilePath_In);
// SEAL:
// -----
if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Seal ||
Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Seal)
{
Populate_tblMapping_Seal(Project_In, DB_In);
PopulateAndMove_DT_Seal(Files_In, Project_In, DB_In, FilePath_In);
}
// TL THRUST BEARING:
// ------------------
if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Thrust_Bearing_TL ||
Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Thrust_Bearing_TL)
{
Populate_tblMapping_TL_TB(Project_In, DB_In);
PopulateAndMove_DT_TL_TB(Files_In, Project_In, DB_In, FilePath_In);
}
// THRUST BEARING ASSY:
// --------------------
if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Thrust_Bearing_TL ||
Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Thrust_Bearing_TL)
{
Populate_tblMapping_TB_Assy(Project_In, DB_In);
PopulateAndMove_DT_TB_Assy(Files_In, Project_In, DB_In, FilePath_In);
}
// COMPLETE ASSY:
// --------------
Populate_tblMapping_Complete(Project_In, OpCond_In, DB_In);
PopulateAndMove_DT_CompleteAssy(Files_In, Project_In, DB_In, FilePath_In);
}
private void Populate_tblMapping_Complete(clsProject Project_In, clsOpCond OpCond_In, clsDB DB_In)
//================================================================================================
{
try
{
//....Set Mapping Value.
StringCollection pCellColName = new StringCollection();
StringCollection pSoftware_VarName = new StringCollection();
string pOrderBy = " ORDER BY fldItemNo ASC";
DB_In.PopulateStringCol(pCellColName, "tblMapping_Complete", "fldCellColName",
pOrderBy);
DB_In.PopulateStringCol(pSoftware_VarName, "tblMapping_Complete", "fldSoftware_VarName",
pOrderBy);
String pUPDATE = "UPDATE tblMapping_Complete ";
String pSET = "SET fldSoftware_VarVal = ";
String pVALUE = null;
String pWHERE = null;
String pSQL = null;
pSQL = pUPDATE + pSET + "NULL";
DB_In.ExecuteCommand(pSQL);
int pNo_Suffix = 1;
if (Project_In.AssyDwg.No_Suffix != "")
{
pNo_Suffix = Convert.ToInt32(Project_In.AssyDwg.No_Suffix);
}
for (int i = 0; i < pSoftware_VarName.Count; i++)
{
pSQL = null;
pWHERE = null;
pVALUE = null;
if (pSoftware_VarName[i] != "")
{
switch (pSoftware_VarName[i])
{
case "gProject.AssDwg.No-01":
//----------------------- //Col. A
//....Set Project Number.
if (pNo_Suffix <= 9)
{
pVALUE = "'" + Project_In.AssyDwg.No + "-0" + (pNo_Suffix).ToString() + "'";
}
else
{
pVALUE = "'" + Project_In.AssyDwg.No + "-" + (pNo_Suffix).ToString() + "'";
}
break;
case "gProject.AssDwg.No-02":
//----------------------- //Col. C
if ((pNo_Suffix + 1) <= 9)
{
pVALUE = "'" + Project_In.AssyDwg.No + "-0" + (pNo_Suffix + 1).ToString() + "'";
}
else
{
pVALUE = "'" + Project_In.AssyDwg.No + "-" + (pNo_Suffix + 1).ToString() + "'";
}
break;
case "gProject.Product.EndConfig[0].Type":
//------------------------------------- //Col. D
if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Seal)
{
pVALUE = "'E'";
}
else if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Thrust_Bearing_TL)
{
pVALUE = "'T'";
}
break;
case "gProject.AssDwg.No-03_1":
//------------------------- //Col. E
if ((pNo_Suffix + 2) <= 9)
{
if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Seal)
{
pVALUE = "'" + Project_In.AssyDwg.No + "-0" + (pNo_Suffix + 2).ToString() + "'";
}
else
{
pVALUE = "''";
}
}
else
{
if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Seal)
{
pVALUE = "'" + Project_In.AssyDwg.No + "-" + (pNo_Suffix + 2).ToString() + "'";
}
else
{
pVALUE = "''";
}
}
break;
case "gProject.AssDwg.No-03_2":
//------------------------- //Col. F
if ((pNo_Suffix + 2) <= 9)
{
if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Thrust_Bearing_TL)
{
pVALUE = "'" + Project_In.AssyDwg.No + "-0" + (pNo_Suffix + 2).ToString() + "'";
}
else
{
pVALUE = "''";
}
}
else
{
if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Thrust_Bearing_TL)
{
pVALUE = "'" + Project_In.AssyDwg.No + "-" + (pNo_Suffix + 2).ToString() + "'";
}
else
{
pVALUE = "''";
}
}
break;
case "gProject.Product.EndConfig[1].Type":
//------------------------------------- //Col. G
if (Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Seal)
{
pVALUE = "'E'";
}
else if (Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Thrust_Bearing_TL)
{
pVALUE = "'T'";
}
break;
case "gProject.AssDwg.No-04_1":
//-------------------------- //Col. H
if ((pNo_Suffix + 3) <= 9)
{
if (Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Seal)
{
pVALUE = "'" + Project_In.AssyDwg.No + "-0" + (pNo_Suffix + 3).ToString() + "'";
}
else
{
pVALUE = "''";
}
}
else
{
if (Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Seal)
{
pVALUE = "'" + Project_In.AssyDwg.No + "-" + (pNo_Suffix + 3).ToString() + "'";
}
else
{
pVALUE = "''";
}
}
break;
case "gProject.AssDwg.No-04_2":
//-------------------------- //Col. I
if ((pNo_Suffix + 3) <= 9)
{
if (Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Thrust_Bearing_TL)
{
pVALUE = "'" + Project_In.AssyDwg.No + "-0" + (pNo_Suffix + 3).ToString() + "'";
}
else
{
pVALUE = "''";
}
}
else
{
if (Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Thrust_Bearing_TL)
{
pVALUE = "'" + Project_In.AssyDwg.No + "-" + (pNo_Suffix + 3).ToString() + "'";
}
else
{
pVALUE = "''";
}
}
break;
case "gProject.Product.Beraing.AntiRotPin.Loc_Bearing_Vert":
//------------------------------------------------------- //Col. J
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Loc_Casing_SL == clsBearing_Radial_FP.clsAntiRotPin.eLoc_Casing_SL.Center)
{
pVALUE = "'I'";
}
else
{
pVALUE = "'" + ((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Loc_Bearing_Vert.ToString() + "'";
}
break;
case "gProject.Product.Bearing.Mount.Holes_GoThru":
//--------------------------------------------- //Col. K
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Holes_GoThru)
{
pVALUE = "'Y'";
}
else
{
pVALUE = "'N'";
}
break;
case "gProject.Product.Bearing.Mount.Holes_Bolting":
//----------------------------------------------- //Col. L
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Holes_GoThru)
{
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Holes_Bolting == clsBearing_Radial_FP.eFaceID.Front)
{
pVALUE = "'F'";
}
else if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Holes_Bolting == clsBearing_Radial_FP.eFaceID.Back)
{
pVALUE = "'B'";
}
}
else
{
pVALUE = "''";
}
break;
case "gProject.Product.EndConfig[0].MountHoles.Type":
//----------------------------------------------- //Col. M
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Holes_GoThru)
{
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Holes_Bolting == clsBearing_Radial_FP.eFaceID.Front)
{
if (Project_In.Product.EndConfig[0].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.C)
{
pVALUE = "'C'";
}
else if (Project_In.Product.EndConfig[0].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.H)
{
pVALUE = "'H'";
}
else if (Project_In.Product.EndConfig[0].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.T)
{
pVALUE = "'T'";
}
}
else if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Holes_Bolting == clsBearing_Radial_FP.eFaceID.Back)
{
pVALUE = "''";
}
}
else
{
// pVALUE = "''";
if (Project_In.Product.EndConfig[0].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.C)
{
pVALUE = "'C'";
}
else if (Project_In.Product.EndConfig[0].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.H)
{
pVALUE = "'H'";
}
else if (Project_In.Product.EndConfig[0].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.T)
{
pVALUE = "'T'";
}
}
break;
case "gProject.Product.EndConfig[1].MountHoles.Type":
//------------------------------------------------ //Col. N
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Holes_GoThru)
{
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Holes_Bolting == clsBearing_Radial_FP.eFaceID.Back)
{
if (Project_In.Product.EndConfig[1].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.C)
{
pVALUE = "'C'";
}
else if (Project_In.Product.EndConfig[1].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.H)
{
pVALUE = "'H'";
}
else if (Project_In.Product.EndConfig[1].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.T)
{
pVALUE = "'T'";
}
}
else if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Holes_Bolting == clsBearing_Radial_FP.eFaceID.Front)
{
pVALUE = "''";
}
}
else
{
//pVALUE = "''";
if (Project_In.Product.EndConfig[1].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.C)
{
pVALUE = "'C'";
}
else if (Project_In.Product.EndConfig[1].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.H)
{
pVALUE = "'H'";
}
else if (Project_In.Product.EndConfig[1].MountHoles.Type == clsEndConfig.clsMountHoles.eMountHolesType.T)
{
pVALUE = "'T'";
}
}
break;
case "gProject.Product.Beraing.Mount.Fixture[0].Screw_Spec.Type":
//------------------------------------------------------------ //Col. O
pVALUE = "'" + ((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].Screw_Spec.Type + "'";
break;
case "gProject.Product.Beraing.Mount.Fixture[0].Screw_Spec.Unit.System":
//------------------------------------------------------------------- //Col. P
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].Screw_Spec.Unit.System == clsUnit.eSystem.English)
{
pVALUE = "'I'";
}
else
{
pVALUE = "'M'";
}
break;
case "gProject.Product.Beraing.Mount.Fixture[0].Screw_Spec.D_Desig":
//-------------------------------------------------------------- //Col. Q
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].Screw_Spec.D_Desig != null) //BG 31DEC12
{
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].Screw_Spec.D_Desig.Contains('M'))
{
pVALUE = "'" + ((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].Screw_Spec.D_Desig.Replace('M', ' ').Trim() + "'";
}
else
{
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].Screw_Spec.D_Desig.Contains('/'))
{
pVALUE = "'" + ((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].Screw_Spec.D + "'";
}
else
{
pVALUE = "'" + ((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].Screw_Spec.D_Desig + "'";
}
}
}
break;
case "gProject.Product.Beraing.Mount.Fixture[0].Screw_Spec.Pitch":
//------------------------------------------------------------- //Col. R
pVALUE = "'" + modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].Screw_Spec.Pitch, "") + "'";
break;
case "gProject.Product.Beraing.Mount.Fixture[0].Screw_Spec.L":
//---------------------------------------------------------- //Col. S
pVALUE = "'" + modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].Screw_Spec.L, "") + "'";
break;
case "gProject.Product.Beraing.Mount.Fixture[0].Screw_Spec.Mat":
//---------------------------------------------------------- //Col. T
pVALUE = "'" + ((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].Screw_Spec.Mat + "'";
break;
case "gProject.Product.Beraing.Mount.Fixture[0].HolesCount":
//------------------------------------------------------ //Col. U
pVALUE = "'" + modMain.ConvIntToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).Mount.Fixture[0].HolesCount) + "'";
break;
case "gProject.Product.Beraing.AntiRotPin.Loc_Casing_SL ":
//---------------------------------------------------- //Col. W
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Loc_Casing_SL == clsBearing_Radial_FP.clsAntiRotPin.eLoc_Casing_SL.Center)
{
pVALUE = "'N'";
}
else if (((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Loc_Casing_SL == clsBearing_Radial_FP.clsAntiRotPin.eLoc_Casing_SL.Offset)
{
pVALUE = "'Y'";
}
break;
case "gProject.Product.Beraing.AntiRotPin.Spec.Type ":
//------------------------------------------------ //Col. X
pVALUE = "'" + ((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Spec.Type + "'";
break;
case "gProject.Product.Beraing.AntiRotPin.Spec.Unit.System":
//------------------------------------------------------ //Col. Y
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Spec.Unit.System == clsUnit.eSystem.English)
{
pVALUE = "'I'";
}
else
{
pVALUE = "'M'";
}
break;
case "gProject.Product.Beraing.AntiRotPin.Spec.D_Desig":
//--------------------------------------------------- //Col. Z
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Spec.D_Desig.Contains('M'))
{
pVALUE = "'" + ((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Spec.D_Desig.Replace('M', ' ').Trim() + "'";
}
else
{
if (((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Spec.D_Desig.Contains('/'))
{
pVALUE = "'" + ((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Spec.D + "'";
}
else
{
pVALUE = "'" + ((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Spec.D_Desig + "'";
}
}
break;
case "gProject.Product.Beraing.AntiRotPin.Spec.L":
//--------------------------------------------- //Col. AA
pVALUE = "'" + modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Spec.L, "") + "'";
break;
case "gProject.Product.Beraing.AntiRotPin.Spec.Mat":
//----------------------------------------------- //Col. AB
pVALUE = "'" + ((clsBearing_Radial_FP)Project_In.Product.Bearing).AntiRotPin.Spec.Mat + "'";
break;
case "gOpCond.Speed()": //....Shaft Speed
//---------------- //Col. AF
////pVALUE = "'" + modMain.ConvIntToStr(OpCond_In.Speed()) + "'";
break;
case "gOpCond.OilSupply.Lube.Type": //....Oil Type
//----------------------------- //Col. AG
////pVALUE = "'" + OpCond_In.OilSupply.Lube.Type + "'";
break;
case "gOpCond.OilSupply.Temp": //....Inlet Temp
//----------------------- //Col. AH
////if (Project_In.Unit.System == clsUnit.eSystem.English)
////{
//// pVALUE = "'" + modMain.NInt(OpCond_In.OilSupply.Temp).ToString() + "'";
////}
////else if (Project_In.Unit.System == clsUnit.eSystem.Metric)
////{
//// pVALUE = "'" + modMain.NInt(Project_In.Unit.CFac_Temp_EngToMet(OpCond_In.OilSupply.Temp)).ToString() + "'";
////}
break;
case "gOpCond.OilSupply.Press": //....Oil Pressure
//----------------------- //Col. AI
////if (Project_In.Unit.System == clsUnit.eSystem.English)
////{
//// //pVALUE = "'" + modMain.NInt(OpCond_In.OilSupply.Press).ToString() + "'";
//// pVALUE = "'" + OpCond_In.OilSupply.Press.ToString("#0.0") + "'";
////}
////else if (Project_In.Unit.System == clsUnit.eSystem.Metric)
////{
//// //pVALUE = "'" + Project_In.Unit.CFac_Press_EngToMet(modMain.NInt(OpCond_In.OilSupply.Press)).ToString("#0.00") + "'";
//// pVALUE = "'" + Project_In.Unit.CFac_Press_EngToMet(OpCond_In.OilSupply.Press).ToString("#0.00") + "'";
////}
break;
case "gOpCond.Radial_Load()": // "gOpCond.Load()": //....Radial Load
//------------------------ //Col. AJ
////if (Project_In.Unit.System == clsUnit.eSystem.English)
////{
//// //pVALUE = "'" + modMain.NInt(OpCond_In.Load()).ToString() + "'";
//// pVALUE = "'" + OpCond_In.Radial_Load().ToString("#0.0") + "'";
////}
////else if (Project_In.Unit.System == clsUnit.eSystem.Metric)
////{
//// //pVALUE = "'" + modMain.NInt(Project_In.Unit.CFac_Load_EngToMet(OpCond_In.Load())).ToString() + "'";
//// pVALUE = "'" + Project_In.Unit.CFac_Load_EngToMet(OpCond_In.Radial_Load()).ToString("#0.00") + "'";
////}
break;
case "gProject.Product.Bearing.DShaft_Range[1]/ gProject.Product.Bearing.DShaft_Range[0]": //....Shaft Dia(Max/Min)
//----------------------------------------------------------------------------------- //Col. AK
if (Project_In.Unit.System == clsUnit.eSystem.English)
{
pVALUE = "'" + modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).DShaft_Range[1], "#0.0000") + "/" +
modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).DShaft_Range[0], "#0.0000") + "'";
}
else if (Project_In.Unit.System == clsUnit.eSystem.Metric)
{
pVALUE = "'" + modMain.ConvDoubleToStr(Project_In.Unit.CEng_Met(((clsBearing_Radial_FP)Project_In.Product.Bearing).DShaft_Range[1]), "#0.0000") + "/" +
modMain.ConvDoubleToStr(Project_In.Unit.CEng_Met(((clsBearing_Radial_FP)Project_In.Product.Bearing).DShaft_Range[0]), "#0.0000") + "'";
}
break;
case "gProject.Product.Bearing.DSet_Range[0]/gProject.Product.Bearing.DSet_Range[1]": //....Bore Dia(Min/Max)
//------------------------------------------------------------------------------- //Col. AL
if (Project_In.Unit.System == clsUnit.eSystem.English)
{
pVALUE = "'" + modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).DSet_Range[0], "#0.0000") + "/" +
modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).DSet_Range[1], "#0.0000") + "'";
}
else if (Project_In.Unit.System == clsUnit.eSystem.Metric)
{
pVALUE = "'" + modMain.ConvDoubleToStr(Project_In.Unit.CEng_Met(((clsBearing_Radial_FP)Project_In.Product.Bearing).DSet_Range[0]), "#0.0000") + "/" +
modMain.ConvDoubleToStr(Project_In.Unit.CEng_Met(((clsBearing_Radial_FP)Project_In.Product.Bearing).DSet_Range[1]), "#0.0000") + "'";
}
break;
case "gProject.Product.Bearing.Pad.Pivot.Offset": //....Offset
//------------------------------------------- //Col. AM
pVALUE = "'" + modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).Pad.Pivot.Offset / 100.0, "#0.00") + "'";
break;
case "gProject.Product.Bearing.PreLoad()": //....Preload
//----------------------------------- //Col. AN
pVALUE = "'" + modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).PreLoad(), "#0.000") + "'";
break;
case "gProject.Product.Bearing.PerformData.Power_HP": //....Power loss
//----------------------------------------------- //Col. AO
if (Project_In.Unit.System == clsUnit.eSystem.English)
{
pVALUE = "'" + modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).PerformData.Power_HP, "#0.0") + "'";
}
else if (Project_In.Unit.System == clsUnit.eSystem.Metric)
{
pVALUE = "'" + modMain.ConvDoubleToStr(Project_In.Product.Unit.CFac_Power_EngToMet(((clsBearing_Radial_FP)Project_In.Product.Bearing).PerformData.Power_HP), "#0.0") + "'";
}
break;
case "gProject.Product.Bearing.PerformData.FlowReqd_gpm": //....Oil Flow
//--------------------------------------------------- //Col. AP
if (Project_In.Unit.System == clsUnit.eSystem.English)
{
pVALUE = "'" + modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).PerformData.FlowReqd_gpm, "#0.0") + "'";
}
else if (Project_In.Unit.System == clsUnit.eSystem.Metric)
{
pVALUE = "'" + modMain.ConvDoubleToStr(Project_In.Product.Unit.CFac_GPM_EngToMet(((clsBearing_Radial_FP)Project_In.Product.Bearing).PerformData.FlowReqd_gpm), "#0.0") + "'";
}
break;
case "gProject.Product.Bearing.PerformData.TempRise_F": //....Temp. Rise
//------------------------------------------------- //Col. AQ
if (Project_In.Unit.System == clsUnit.eSystem.English)
{
pVALUE = "'" + modMain.ConvDoubleToStr(((clsBearing_Radial_FP)Project_In.Product.Bearing).PerformData.TempRise_F, "#0.0") + "'";
}
else if (Project_In.Unit.System == clsUnit.eSystem.Metric)
{
pVALUE = "'" + modMain.ConvDoubleToStr(Project_In.Product.Unit.CFac_TRise_EngToMet(((clsBearing_Radial_FP)Project_In.Product.Bearing).PerformData.TempRise_F), "#0.0") + "'";
}
break;
case "gProject.Customer.PartNo": //....Part No
//--------------------------- //Col. AR
pVALUE = "'" + Project_In.Customer.PartNo + "'";
break;
case "gProject.Customer.MachineDesc":
//------------------------------- //Col. AS
pVALUE = "'" + Project_In.Customer.MachineDesc + "'";
break;
//BG 10JAN13
////case "gOpCond.Thrust_Load_Front()": //"gProject.Product.EndConfig[0].PerformData.PadMax_Load":
//// //------------------------------ //Col. CE
//// //double pMaxLoad = 0.0;
//// //int pPadCount = 0;
//// //if (Project_In.Product.EndConfig[0].Type == clsEndConfig.eType.Thrust_Bearing_TL)
//// //{
//// // pPadCount = ((clsBearing_Thrust_TL)Project_In.Product.EndConfig[0]).Pad_Count;
//// // pMaxLoad = ((clsBearing_Thrust_TL)Project_In.Product.EndConfig[0]).PerformData.PadMax.Load;
//// // pVALUE = "'" + modMain.ConvDoubleToStr(pMaxLoad * pPadCount, "") + "'";
//// //}
//// //else if (Project_In.Product.EndConfig[1].Type == clsEndConfig.eType.Thrust_Bearing_TL)
//// //{
//// // pPadCount = ((clsBearing_Thrust_TL)Project_In.Product.EndConfig[1]).Pad_Count;
//// // pMaxLoad = ((clsBearing_Thrust_TL)Project_In.Product.EndConfig[1]).PerformData.PadMax.Load;
//// // pVALUE = "'" + modMain.ConvDoubleToStr(pMaxLoad * pPadCount, "") + "'";
//// //}
//// pVALUE = "'" + modMain.ConvDoubleToStr(OpCond_In.Thrust_Load_Front(), "#0.0") + "'";
//// break;
////case "gOpCond.Thrust_Load_Back()":
//// //------------------------------ //Col. CF
//// pVALUE = "'" + modMain.ConvDoubleToStr(OpCond_In.Thrust_Load_Back(), "#0.0") + "'";
//// break;
case "gProject.Customer.Name":
//------------------------- //Col. CG
pVALUE = "'" + Project_In.Customer.Name + "'";
break;
}
if (pVALUE != null)
{
pWHERE = " WHERE fldCellColName = '" + pCellColName[i] + "'";
pSQL = pUPDATE + pSET + pVALUE + pWHERE;
DB_In.ExecuteCommand(pSQL);
}
}
}
}
catch (Exception pEXP)
{
MessageBox.Show("Excel File Error - " + pEXP.Message);
}
}
