private void DrawSpecularSettings(MaterialEditor materialEditor)
{
showSpecular = XSStyles.ShurikenFoldout("Specular", showSpecular);
if (showSpecular)
{
materialEditor.ShaderProperty(_SpecMode, new GUIContent("Specular Mode", "Specular Mode."));
materialEditor.ShaderProperty(_SpecularStyle, new GUIContent("Specular Style", "Specular Style."));
XSStyles.SeparatorThin();
materialEditor.TexturePropertySingleLine(new GUIContent("Specular Map(R,G,B)", "Specular Map. Red channel controls Intensity, Green controls how much specular is tinted by Albedo, and Blue controls Smoothness (Only for Blinn-Phong, and GGX)."), _SpecularMap);
materialEditor.TextureScaleOffsetProperty(_SpecularMap);
materialEditor.ShaderProperty(_UVSetSpecular, new GUIContent("UV Set", "The UV set to use for the Specular Map"), 2);
materialEditor.ShaderProperty(_SpecularIntensity, new GUIContent("Specular Intensity", "Specular Intensity."), 2);
materialEditor.ShaderProperty(_SpecularAlbedoTint, new GUIContent("Specular Albedo Tint", "How much the specular highlight should derive color from the albedo of the object."), 2);
if (_SpecMode.floatValue == 0 || _SpecMode.floatValue == 2)
{
materialEditor.ShaderProperty(_SpecularArea, new GUIContent("Specular Area", "Specular Area."), 2);
}
else
{
materialEditor.ShaderProperty(_AnisotropicAX, new GUIContent("Anisotropic Width", "Anisotropic Width, makes anistropic relfections more horizontal"), 2);
materialEditor.ShaderProperty(_AnisotropicAY, new GUIContent("Anisotropic Height", "Anisotropic Height, makes anistropic relfections more vertical"), 2);
}
}
}
private void DrawPatreonSettings(MaterialEditor materialEditor)
{
//Plugins for Patreon releases
if (isPatreonShader)
{
if (isEyeTracking)
{
showEyeTracking = XSStyles.ShurikenFoldout("Eye Tracking Settings", showEyeTracking);
if (showEyeTracking)
{
materialEditor.ShaderProperty(_LeftRightPan, new GUIContent("Left Right Adj.", "Adjusts the eyes manually left or right."));
materialEditor.ShaderProperty(_UpDownPan, new GUIContent("Up Down Adj.", "Adjusts the eyes manually up or down."));
XSStyles.SeparatorThin();
materialEditor.ShaderProperty(_AttentionSpan, new GUIContent("Attention Span", "How often should the eyes look at the target; 0 = never, 1 = always, 0.5 = half of the time."));
materialEditor.ShaderProperty(_FollowPower, new GUIContent("Follow Power", "The influence the target has on the eye"));
materialEditor.ShaderProperty(_LookSpeed, new GUIContent("Look Speed", "How fast the eye transitions to looking at the target"));
materialEditor.ShaderProperty(_Twitchyness, new GUIContent("Refocus Frequency", "How much should the eyes look around near the target?"));
XSStyles.SeparatorThin();
materialEditor.ShaderProperty(_IrisSize, new GUIContent("Iris Size", "Size of the iris"));
materialEditor.ShaderProperty(_FollowLimit, new GUIContent("Follow Limit", "Limits the angle from the front of the face on how far the eyes can track/rotate."));
materialEditor.ShaderProperty(_EyeOffsetLimit, new GUIContent("Offset Limit", "Limit for how far the eyes can turn"));
}
}
}
//
}
private void DrawMainSettings(MaterialEditor materialEditor)
{
showMainSettings = XSStyles.ShurikenFoldout("Main Settings", showMainSettings);
if (showMainSettings)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Main Texture", "The main Albedo texture."), _MainTex, _Color);
if (isCutout)
{
materialEditor.ShaderProperty(_Cutoff, new GUIContent("Cutoff", "The Cutoff Amount"), 2);
}
if (isCutoutMasked)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Dissolve Mask", "Black and white cutout mask"), _CutoutMask);
materialEditor.ShaderProperty(_Cutoff, new GUIContent("Dissolve Progress", "The Cutoff Amount"), 2);
}
materialEditor.ShaderProperty(_UVSetAlbedo, new GUIContent("UV Set", "The UV set to use for the Albedo Texture."), 2);
materialEditor.TextureScaleOffsetProperty(_MainTex);
materialEditor.ShaderProperty(_Saturation, new GUIContent("Saturation", "Controls saturation of the final output from the shader."));
if (isDithered)
{
//Dither Fading
materialEditor.TexturePropertySingleLine(new GUIContent("Dissolve Mask", "Black and white mask to control dithering."), _CutoutMask);
materialEditor.ShaderProperty(_FadeDither, new GUIContent("Use Distance Fading", "Make the shader dither out based on the distance to the camera."), 2);
materialEditor.ShaderProperty(_FadeDitherDistance, new GUIContent("Fade Distance", "The distance at which the fading starts happening."), 2);
}
}
}
void drawHelpText()
{
XSStyles.Separator();
dHelpText = XSStyles.ShurikenFoldout("Information", dHelpText);
if (dHelpText)
{
scrollPos = EditorGUILayout.BeginScrollView(scrollPos);
XSStyles.HelpBox("You can use this to create a custom shadow ramp in realtime. \nIf you do not save, the ramp will be reverted back to what it was previously. \n\n - Click the Gradient box. \n - Choose resolution of the texture. \n - Save.", MessageType.Info);
XSStyles.HelpBox("Ramp textures support up to 5 ramps in one texture. That means you can have up to 5 ramps on a single material. You will need to author a ramp mask to choose which ramp to sample from. \n\nA texture that is fully black would sample from the bottom ramp, a texture that is fully white would sample from the top ramp, and a texture that is half gray would sample from the middle ramp. \n\n A quick tip would be that you can sample from each of the 5 ramps with 0, 0.25, 0.5, 0.75, and 1 on the texture. \n\nThe order of the gradients on the UI is the order that they will be on the texture.", MessageType.Info);
EditorGUILayout.EndScrollView();
}
}
private void DrawTransmissionSettings(MaterialEditor materialEditor)
{
showSubsurface = XSStyles.ShurikenFoldout("Transmission", showSubsurface);
if (showSubsurface)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Thickness Map", "Thickness Map, used to mask areas where transmission can happen"), _ThicknessMap);
materialEditor.TextureScaleOffsetProperty(_ThicknessMap);
materialEditor.ShaderProperty(_UVSetThickness, new GUIContent("UV Set", "The UV set to use for the Thickness Map"), 2);
XSStyles.constrainedShaderProperty(materialEditor, _SSColor, new GUIContent("Transmission Color", "Transmission Color"), 2);
materialEditor.ShaderProperty(_SSDistortion, new GUIContent("Transmission Distortion", "How much the Transmission should follow the normals of the mesh and/or normal map."), 2);
materialEditor.ShaderProperty(_SSPower, new GUIContent("Transmission Power", "Subsurface Power"), 2);
materialEditor.ShaderProperty(_SSScale, new GUIContent("Transmission Scale", "Subsurface Scale"), 2);
}
}
private void DrawRimlightSettings(MaterialEditor materialEditor)
{
showRimlight = XSStyles.ShurikenFoldout("Rimlight", showRimlight);
if (showRimlight)
{
materialEditor.ShaderProperty(_RimColor, new GUIContent("Rimlight Tint", "The Tint of the Rimlight."));
materialEditor.ShaderProperty(_RimAlbedoTint, new GUIContent("Rim Albedo Tint", "How much the Albedo texture should effect the rimlight color."));
materialEditor.ShaderProperty(_RimCubemapTint, new GUIContent("Rim Environment Tint", "How much the Environment cubemap should effect the rimlight color."));
materialEditor.ShaderProperty(_RimAttenEffect, new GUIContent("Rim Attenuation Effect", "How much should realtime shadows mask out the rimlight?"));
materialEditor.ShaderProperty(_RimIntensity, new GUIContent("Rimlight Intensity", "Strength of the Rimlight."));
materialEditor.ShaderProperty(_RimRange, new GUIContent("Range", "Range of the Rim"), 2);
materialEditor.ShaderProperty(_RimThreshold, new GUIContent("Threshold", "Threshold of the Rim"), 2);
materialEditor.ShaderProperty(_RimSharpness, new GUIContent("Sharpness", "Sharpness of the Rim"), 2);
}
}
private void DrawOutlineSettings(MaterialEditor materialEditor)
{
if (isOutlined)
{
showOutlines = XSStyles.ShurikenFoldout("Outlines", showOutlines);
if (showOutlines)
{
materialEditor.ShaderProperty(_OutlineLighting, new GUIContent("Outline Lighting", "Makes outlines respect the lighting, or be emissive."));
materialEditor.ShaderProperty(_OutlineAlbedoTint, new GUIContent("Outline Albedo Tint", "Includes the color of the Albedo Texture in the calculation for the color of the outline."));
materialEditor.TexturePropertySingleLine(new GUIContent("Outline Mask", "Outline width mask, black will make the outline minimum width."), _OutlineMask);
materialEditor.ShaderProperty(_OutlineWidth, new GUIContent("Outline Width", "Width of the Outlines"));
XSStyles.constrainedShaderProperty(materialEditor, _OutlineColor, new GUIContent("Outline Color", "Color of the outlines"), 0);
}
}
}
private void DrawAdvancedSettings(MaterialEditor materialEditor)
{
if (_AdvMode.floatValue == 1)
{
showAdvanced = XSStyles.ShurikenFoldout("Advanced Settings", showAdvanced);
if (showAdvanced)
{
materialEditor.ShaderProperty(_VertexColorAlbedo, new GUIContent("Vertex Color Albedo", "Multiplies the vertex color of the mesh by the Albedo texture to derive the final Albedo color."));
materialEditor.ShaderProperty(_Stencil, _Stencil.displayName);
materialEditor.ShaderProperty(_StencilComp, _StencilComp.displayName);
materialEditor.ShaderProperty(_StencilOp, _StencilOp.displayName);
materialEditor.RenderQueueField();
}
}
}
private void DrawEmissionSettings(MaterialEditor materialEditor)
{
showEmission = XSStyles.ShurikenFoldout("Emission", showEmission);
if (showEmission)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Emission Map", "Emissive map. White to black, unless you want multiple colors."), _EmissionMap, _EmissionColor);
materialEditor.TextureScaleOffsetProperty(_EmissionMap);
materialEditor.ShaderProperty(_UVSetEmission, new GUIContent("UV Set", "The UV set to use for the Emission Map"), 2);
materialEditor.ShaderProperty(_EmissionToDiffuse, new GUIContent("Tint To Diffuse", "Tints the emission to the Diffuse Color"), 2);
XSStyles.SeparatorThin();
materialEditor.ShaderProperty(_ScaleWithLight, new GUIContent("Scale w/ Light", "Scales the emission intensity based on how dark or bright the environment is."));
if (_ScaleWithLight.floatValue == 0)
{
materialEditor.ShaderProperty(_ScaleWithLightSensitivity, new GUIContent("Scaling Sensitivity", "How agressively the emission should scale with the light."));
}
}
}
private void DrawHalfToneSettings(MaterialEditor materialEditor)
{
showHalftones = XSStyles.ShurikenFoldout("Halftones", showHalftones);
if (showHalftones)
{
materialEditor.ShaderProperty(_HalftoneType, new GUIContent("Halftone Style", "Controls where halftone and stippling effects are drawn."));
if (_HalftoneType.floatValue == 1 || _HalftoneType.floatValue == 2)
{
materialEditor.ShaderProperty(_HalftoneDotSize, new GUIContent("Stippling Scale", "How large should the stippling pattern be?"));
materialEditor.ShaderProperty(_HalftoneDotAmount, new GUIContent("Stippling Density", "How dense is the stippling effect?"));
}
if (_HalftoneType.floatValue == 0 || _HalftoneType.floatValue == 2)
{
materialEditor.ShaderProperty(_HalftoneLineAmount, new GUIContent("Halftone Line Count", "How many lines should the halftone shadows have?"));
materialEditor.ShaderProperty(_HalftoneLineIntensity, new GUIContent("Halftone Line Intensity", "How dark should the halftone lines be?"));
}
}
}
private void DrawShadowSettings(MaterialEditor materialEditor, Material material)
{
showShadows = XSStyles.ShurikenFoldout("Shadows", showShadows);
if (showShadows)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Ramp Selection Mask", "A black to white mask that determins how far up on the multi ramp to sample. 0 for bottom, 1 for top, 0.5 for middle, 0.25, and 0.75 for mid bottom and mid top respectively."), _RampSelectionMask);
XSStyles.SeparatorThin();
if (_RampSelectionMask.textureValue != null)
{
string rampMaskPath = AssetDatabase.GetAssetPath(_RampSelectionMask.textureValue);
TextureImporter ti = (TextureImporter)TextureImporter.GetAtPath(rampMaskPath);
if (ti.sRGBTexture)
{
if (XSStyles.HelpBoxWithButton(new GUIContent("This texture is not marked as Linear.", "This is recommended for the mask"), new GUIContent("Fix Now")))
{
ti.sRGBTexture = false;
AssetDatabase.ImportAsset(rampMaskPath, ImportAssetOptions.ForceUpdate);
AssetDatabase.Refresh();
}
}
}
materialEditor.TexturePropertySingleLine(new GUIContent("Shadow Ramp", "Shadow Ramp, Dark to Light should be Left to Right"), _Ramp);
materialEditor.ShaderProperty(_ShadowSharpness, new GUIContent("Shadow Sharpness", "Controls the sharpness of recieved shadows, as well as the sharpness of 'shadows' from Vertex Lighting."));
XSStyles.SeparatorThin();
materialEditor.TexturePropertySingleLine(new GUIContent("Occlusion Map", "Occlusion Map, used to darken areas on the model artifically."), _OcclusionMap);
XSStyles.constrainedShaderProperty(materialEditor, _OcclusionColor, new GUIContent("Occlusion Tint", "Occlusion shadow tint."), 2);
materialEditor.ShaderProperty(_UVSetOcclusion, new GUIContent("UV Set", "The UV set to use for the Occlusion Texture"), 2);
materialEditor.TextureScaleOffsetProperty(_OcclusionMap);
XSStyles.SeparatorThin();
XSStyles.constrainedShaderProperty(materialEditor, _ShadowRim, new GUIContent("Shadow Rim", "Shadow Rim Color. Set to white to disable."), 0);
materialEditor.ShaderProperty(_ShadowRimAlbedoTint, new GUIContent("Shadow Rim Albedo Tint", "How much the Albedo texture should effect the Shadow Rim color."));
materialEditor.ShaderProperty(_ShadowRimRange, new GUIContent("Range", "Range of the Shadow Rim"), 2);
materialEditor.ShaderProperty(_ShadowRimThreshold, new GUIContent("Threshold", "Threshold of the Shadow Rim"), 2);
materialEditor.ShaderProperty(_ShadowRimSharpness, new GUIContent("Sharpness", "Sharpness of the Shadow Rim"), 2);
XSStyles.callGradientEditor(material);
}
}
private void DrawNormalSettings(MaterialEditor materialEditor)
{
showNormalMapSettings = XSStyles.ShurikenFoldout("Normal Maps", showNormalMapSettings);
if (showNormalMapSettings)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Normal Map", "Normal Map"), _BumpMap);
materialEditor.ShaderProperty(_BumpScale, new GUIContent("Normal Strength", "Strength of the main Normal Map"), 2);
materialEditor.ShaderProperty(_UVSetNormal, new GUIContent("UV Set", "The UV set to use for the Normal Map"), 2);
materialEditor.TextureScaleOffsetProperty(_BumpMap);
XSStyles.SeparatorThin();
materialEditor.TexturePropertySingleLine(new GUIContent("Detail Normal Map", "Detail Normal Map"), _DetailNormalMap);
materialEditor.ShaderProperty(_DetailNormalMapScale, new GUIContent("Detail Normal Strength", "Strength of the detail Normal Map"), 2);
materialEditor.ShaderProperty(_UVSetDetNormal, new GUIContent("UV Set", "The UV set to use for the Detail Normal Map"), 2);
materialEditor.TextureScaleOffsetProperty(_DetailNormalMap);
XSStyles.SeparatorThin();
materialEditor.TexturePropertySingleLine(new GUIContent("Detail Mask", "Mask for Detail Maps"), _DetailMask);
materialEditor.ShaderProperty(_UVSetDetMask, new GUIContent("UV Set", "The UV set to use for the Detail Mask"), 2);
materialEditor.TextureScaleOffsetProperty(_DetailMask);
}
}
public override void OnGUI(MaterialEditor materialEditor, MaterialProperty[] props)
{
Material material = materialEditor.target as Material;
Shader shader = material.shader;
isCutout = shader.name.Contains("Cutout") && !shader.name.Contains("A2C");
isOutlined = shader.name.Contains("Outline");
//Find all material properties listed in the script using reflection, and set them using a loop only if they're of type MaterialProperty.
//This makes things a lot nicer to maintain and cleaner to look at.
foreach (var property in GetType().GetFields(bindingFlags))
{
if (property.FieldType == typeof(MaterialProperty))
{
property.SetValue(this, FindProperty(property.Name, props));
}
}
EditorGUI.BeginChangeCheck();
{
if (!isCutout) // Do this to make sure that if you're using AlphaToCoverage that you fallback to cutout with 0.5 Cutoff if your shaders are blocked.
{
material.SetFloat("_Cutoff", 0.5f);
}
XSStyles.ShurikenHeaderCentered("XSToon v" + XSStyles.ver);
showMainSettings = XSStyles.ShurikenFoldout("Main Settings", showMainSettings);
if (showMainSettings)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Main Texture", "The Main Texture."), _MainTex, _Color);
if (isCutout)
{
materialEditor.ShaderProperty(_Cutoff, new GUIContent("Cutoff", "The Cutoff Amount"), 2);
}
materialEditor.ShaderProperty(_UVSetAlbedo, new GUIContent("UV Set", "The UV set to use for the Albedo Texture"), 2);
materialEditor.TextureScaleOffsetProperty(_MainTex);
materialEditor.ShaderProperty(_Saturation, new GUIContent("Saturation", "Controls saturation of the final output from the shader."));
materialEditor.ShaderProperty(_Culling, _Culling.displayName);
materialEditor.ShaderProperty(_AdvMode, "Shader Mode");
}
showShadows = XSStyles.ShurikenFoldout("Shadows", showShadows);
if (showShadows)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Shadow Ramp", "Shadow Ramp, Dark to Light should be Left to Right, or Down to Up"), _Ramp);
materialEditor.ShaderProperty(_ShadowSharpness, new GUIContent("Shadow Sharpness", "Only affects recieved shadows and self shadows. Does not affect shadow ramp. You need a realtime directional light with shadows to see changes from this!"));
GUILayout.Space(5);
materialEditor.TexturePropertySingleLine(new GUIContent("Occlusion Map", "Occlusion Map, used to darken areas on the model artifically."), _OcclusionMap);
XSStyles.constrainedShaderProperty(materialEditor, _OcclusionColor, new GUIContent("Occlusion Tint", "Occlusion shadow tint."), 2);
materialEditor.ShaderProperty(_UVSetOcclusion, new GUIContent("UV Set", "The UV set to use for the Occlusion Texture"), 2);
GUILayout.Space(5);
XSStyles.constrainedShaderProperty(materialEditor, _ShadowRim, new GUIContent("Shadow Rim", "Shadow Rim Color. Set to white to disable."), 0);
materialEditor.ShaderProperty(_ShadowRimRange, new GUIContent("Range", "Range of the Shadow Rim"), 2);
materialEditor.ShaderProperty(_ShadowRimThreshold, new GUIContent("Threshold", "Threshold of the Shadow Rim"), 2);
materialEditor.ShaderProperty(_ShadowRimSharpness, new GUIContent("Sharpness", "Sharpness of the Shadow Rim"), 2);
XSStyles.callGradientEditor(material);
}
if (isOutlined)
{
showOutlines = XSStyles.ShurikenFoldout("Outlines", showOutlines);
if (showOutlines)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Outline Mask", "Outline width mask, black will make the outline minimum width."), _OutlineMask);
materialEditor.ShaderProperty(_OutlineWidth, new GUIContent("Outline Width", "Width of the Outlines"));
XSStyles.constrainedShaderProperty(materialEditor, _OutlineColor, new GUIContent("Outline Color", "Color of the outlines"), 0);
}
}
showNormalMapSettings = XSStyles.ShurikenFoldout("Normal Maps", showNormalMapSettings);
if (showNormalMapSettings)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Normal Map", "Normal Map"), _BumpMap);
materialEditor.ShaderProperty(_BumpScale, new GUIContent("Normal Strength", "Strength of the main Normal Map"), 2);
materialEditor.ShaderProperty(_UVSetNormal, new GUIContent("UV Set", "The UV set to use for the Normal Map"), 2);
materialEditor.TextureScaleOffsetProperty(_BumpMap);
GUILayout.Space(5);
materialEditor.TexturePropertySingleLine(new GUIContent("Detail Normal Map", "Detail Normal Map"), _DetailNormalMap);
materialEditor.ShaderProperty(_DetailNormalMapScale, new GUIContent("Detail Normal Strength", "Strength of the detail Normal Map"), 2);
materialEditor.ShaderProperty(_UVSetDetNormal, new GUIContent("UV Set", "The UV set to use for the Detail Normal Map"), 2);
materialEditor.TextureScaleOffsetProperty(_DetailNormalMap);
GUILayout.Space(5);
materialEditor.TexturePropertySingleLine(new GUIContent("Detail Mask", "Mask for Detail Normal Map"), _DetailMask);
materialEditor.ShaderProperty(_UVSetDetMask, new GUIContent("UV Set", "The UV set to use for the Detail Mask"), 2);
materialEditor.TextureScaleOffsetProperty(_DetailMask);
}
showSpecular = XSStyles.ShurikenFoldout("Specular", showSpecular);
if (showSpecular)
{
materialEditor.ShaderProperty(_SpecMode, new GUIContent("Specular Mode", "Specular Mode."));
materialEditor.ShaderProperty(_SpecularStyle, new GUIContent("Specular Style", "Specular Style."));
materialEditor.TexturePropertySingleLine(new GUIContent("Specular Map(R,G,B)", "Specular Map. Red channel controls Intensity, Green controls how much specular is tinted by Albedo, and Blue controls Smoothness (Only for Blinn-Phong, and GGX)."), _SpecularMap);
materialEditor.TextureScaleOffsetProperty(_SpecularMap);
materialEditor.ShaderProperty(_UVSetSpecular, new GUIContent("UV Set", "The UV set to use for the Specular Map"), 2);
materialEditor.ShaderProperty(_SpecularIntensity, new GUIContent("Specular Intensity", "Specular Intensity."), 2);
materialEditor.ShaderProperty(_SpecularAlbedoTint, new GUIContent("Specular Albedo Tint", "How much the specular highlight should derive color from the albedo of the object."), 2);
if (_SpecMode.floatValue == 0 || _SpecMode.floatValue == 2)
{
materialEditor.ShaderProperty(_SpecularArea, new GUIContent("Specular Area", "Specular Area."), 2);
}
else
{
materialEditor.ShaderProperty(_AnisotropicAX, new GUIContent("Anisotropic Width", "Anisotropic Width"), 2);
materialEditor.ShaderProperty(_AnisotropicAY, new GUIContent("Anisotropic Height", "Anisotropic Height"), 2);
}
}
showReflection = XSStyles.ShurikenFoldout("Reflections", showReflection);
if (showReflection)
{
materialEditor.ShaderProperty(_ReflectionMode, new GUIContent("Reflection Mode", "Reflection Mode."));
if (_ReflectionMode.floatValue == 0) // PBR
{
materialEditor.ShaderProperty(_ReflectionBlendMode, new GUIContent("Reflection Blend Mode", "Blend mode for reflection. Additive is Color + reflection, Multiply is Color * reflection, and subtractive is Color - reflection"));
materialEditor.TexturePropertySingleLine(new GUIContent("Fallback Cubemap", " Used as fallback in 'Unity' reflection mode if reflection probe is black."), _BakedCubemap);
materialEditor.TexturePropertySingleLine(new GUIContent("Metallic Map", "Metallic Map, Metallic on Red Channel, Smoothness on Alpha Channel"), _MetallicGlossMap);
materialEditor.TextureScaleOffsetProperty(_MetallicGlossMap);
materialEditor.ShaderProperty(_UVSetMetallic, new GUIContent("UV Set", "The UV set to use for the MetallicSmoothness Map"), 2);
materialEditor.ShaderProperty(_Metallic, new GUIContent("Metallic", "Metallic, set to 1 if using metallic map"), 2);
materialEditor.ShaderProperty(_Glossiness, new GUIContent("Smoothness", "Smoothness, set to 1 if using metallic map"), 2);
}
else if (_ReflectionMode.floatValue == 1) //Baked cube
{
materialEditor.ShaderProperty(_ReflectionBlendMode, new GUIContent("Reflection Blend Mode", "Blend mode for reflection. Additive is Color + reflection, Multiply is Color * reflection, and subtractive is Color - reflection"));
materialEditor.TexturePropertySingleLine(new GUIContent("Baked Cubemap", "Baked cubemap."), _BakedCubemap);
materialEditor.TexturePropertySingleLine(new GUIContent("Metallic Map", "Metallic Map, Metallic on Red Channel, Smoothness on Alpha Channel"), _MetallicGlossMap);
materialEditor.TextureScaleOffsetProperty(_MetallicGlossMap);
materialEditor.ShaderProperty(_UVSetMetallic, new GUIContent("UV Set", "The UV set to use for the MetallicSmoothness Map"), 2);
materialEditor.ShaderProperty(_Metallic, new GUIContent("Metallic", "Metallic, set to 1 if using metallic map"), 2);
materialEditor.ShaderProperty(_Glossiness, new GUIContent("Smoothness", "Smoothness, set to 1 if using metallic map"), 2);
}
else if (_ReflectionMode.floatValue == 2) //Matcap
{
materialEditor.ShaderProperty(_ReflectionBlendMode, new GUIContent("Reflection Blend Mode", "Blend mode for reflection. Additive is Color + reflection, Multiply is Color * reflection, and subtractive is Color - reflection"));
materialEditor.TexturePropertySingleLine(new GUIContent("Matcap", "Matcap Texture"), _Matcap);
materialEditor.ShaderProperty(_Glossiness, new GUIContent("Matcap Blur", "Matcap blur, blurs the Matcap, set to 1 for full clarity"), 2);
material.SetFloat("_Metallic", 0);
material.SetTexture("_MetallicGlossMap", null);
}
if (_ReflectionMode.floatValue != 3)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Reflectivity Mask", "Mask for reflections."), _ReflectivityMask);
materialEditor.TextureScaleOffsetProperty(_ReflectivityMask);
materialEditor.ShaderProperty(_UVSetReflectivity, new GUIContent("UV Set", "The UV set to use for the Reflectivity Mask"), 2);
materialEditor.ShaderProperty(_Reflectivity, new GUIContent("Reflectivity", "The strength of the reflections."), 2);
}
if (_ReflectionMode.floatValue == 3)
{
material.SetFloat("_Metallic", 0);
material.SetFloat("_ReflectionBlendMode", 0);
}
}
showEmission = XSStyles.ShurikenFoldout("Emission", showEmission);
if (showEmission)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Emission Map", "Emissive map. White to black, unless you want multiple colors."), _EmissionMap, _EmissionColor);
materialEditor.ShaderProperty(_UVSetEmission, new GUIContent("UV Set", "The UV set to use for the Emission Map"), 2);
materialEditor.TextureScaleOffsetProperty(_EmissionMap);
}
showRimlight = XSStyles.ShurikenFoldout("Rimlight", showRimlight);
if (showRimlight)
{
materialEditor.ShaderProperty(_RimIntensity, new GUIContent("Rimlight Intensity", "Strnegth of the Rimlight."));
materialEditor.ShaderProperty(_RimRange, new GUIContent("Range", "Range of the Rim"), 2);
materialEditor.ShaderProperty(_RimThreshold, new GUIContent("Threshold", "Threshold of the Rim"), 2);
materialEditor.ShaderProperty(_RimSharpness, new GUIContent("Sharpness", "Sharpness of the Rim"), 2);
}
showSubsurface = XSStyles.ShurikenFoldout("Subsurface Scattering", showSubsurface);
if (showSubsurface)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Thickness Map", "Thickness Map, used to mask areas where subsurface can happen"), _ThicknessMap);
materialEditor.TextureScaleOffsetProperty(_ThicknessMap);
materialEditor.ShaderProperty(_UVSetThickness, new GUIContent("UV Set", "The UV set to use for the Thickness Map"), 2);
XSStyles.constrainedShaderProperty(materialEditor, _SSColor, new GUIContent("Subsurface Color", "Subsurface Scattering Color"), 2);
materialEditor.ShaderProperty(_SSDistortion, new GUIContent("Subsurface Distortion", "How much the subsurface follows the normals of the mesh, Normal map."), 2);
materialEditor.ShaderProperty(_SSPower, new GUIContent("Subsurface Power", "Subsurface Power"), 2);
materialEditor.ShaderProperty(_SSScale, new GUIContent("Subsurface Scale", "Subsurface Scale"), 2);
materialEditor.ShaderProperty(_SSSRange, new GUIContent("Subsurface Range", "Subsurface Range"), 2);
materialEditor.ShaderProperty(_SSSSharpness, new GUIContent("Subsurface Sharpness", "Subsurface Sharpness"), 2);
}
if (_AdvMode.floatValue == 1)
{
showAdvanced = XSStyles.ShurikenFoldout("Advanced Settings", showAdvanced);
if (showAdvanced)
{
materialEditor.ShaderProperty(_Stencil, _Stencil.displayName);
materialEditor.ShaderProperty(_StencilComp, _StencilComp.displayName);
materialEditor.ShaderProperty(_StencilOp, _StencilOp.displayName);
}
}
XSStyles.DoFooter();
}
}
public override void OnGUI(MaterialEditor materialEditor, MaterialProperty[] props)
{
Material material = materialEditor.target as Material;
Shader shader = material.shader;
isCutout = shader.name.Contains("Cutout") && !shader.name.Contains("A2C");
isOutlined = shader.name.Contains("Outline");
//Find all material properties listed in the script using reflection, and set them using a loop only if they're of type MaterialProperty.
//This makes things a lot nicer to maintain and cleaner to look at.
foreach (var property in GetType().GetFields(bindingFlags))
{
if (property.FieldType == typeof(MaterialProperty))
{
property.SetValue(this, FindProperty(property.Name, props));
}
}
EditorGUI.BeginChangeCheck();
{
if (!isCutout)// Do this to make sure that if you're using AlphaToCoverage that you fallback to cutout with 0.5 Cutoff if your shaders are blocked.
{
material.SetFloat("_Cutoff", 0.5f);
}
XSStyles.ShurikenHeaderCentered("XSToon v" + XSStyles.ver);
materialEditor.ShaderProperty(_AdvMode, new GUIContent("Shader Mode", "Setting this to 'Advanced' will give you access to things such as stenciling, and other expiremental/advanced features."));
materialEditor.ShaderProperty(_Culling, new GUIContent("Culling Mode", "Changes the culling mode. 'Off' will result in a two sided material, while 'Front' and 'Back' will cull those sides respectively"));
materialEditor.ShaderProperty(_TilingMode, new GUIContent("Tiling Mode", "Setting this to Merged will tile and offset all textures based on the Main texture's Tiling/Offset."));
showMainSettings = XSStyles.ShurikenFoldout("Main Settings", showMainSettings);
if (showMainSettings)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Main Texture", "The Main Texture."), _MainTex, _Color);
if (isCutout)
{
materialEditor.ShaderProperty(_Cutoff, new GUIContent("Cutoff", "The Cutoff Amount"), 2);
}
materialEditor.ShaderProperty(_UVSetAlbedo, new GUIContent("UV Set", "The UV set to use for the Albedo Texture"), 2);
materialEditor.TextureScaleOffsetProperty(_MainTex);
materialEditor.ShaderProperty(_Saturation, new GUIContent("Saturation", "Controls saturation of the final output from the shader."));
}
showShadows = XSStyles.ShurikenFoldout("Shadows", showShadows);
if (showShadows)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Ramp Selection Mask", "A black to white mask that determins how far up on the multi ramp to sample. 0 for bottom, 1 for top, 0.5 for middle, 0.25, and 0.75 for mid bottom and mid top respectively."), _RampSelectionMask);
if (_RampSelectionMask.textureValue != null)
{
string rampMaskPath = AssetDatabase.GetAssetPath(_RampSelectionMask.textureValue);
TextureImporter ti = (TextureImporter)TextureImporter.GetAtPath(rampMaskPath);
if (ti.sRGBTexture)
{
if (XSStyles.HelpBoxWithButton(new GUIContent("This texture is not marked as Linear.", "This is recommended for the mask"), new GUIContent("Fix Now")))
{
ti.sRGBTexture = false;
AssetDatabase.ImportAsset(rampMaskPath, ImportAssetOptions.ForceUpdate);
AssetDatabase.Refresh();
}
}
}
materialEditor.TexturePropertySingleLine(new GUIContent("Shadow Ramp", "Shadow Ramp, Dark to Light should be Left to Right, or Down to Up"), _Ramp);
materialEditor.ShaderProperty(_ShadowSharpness, new GUIContent("Shadow Sharpness", "Controls the sharpness of recieved shadows, as well as the sharpness of 'shadows' from Vertex Lighting."));
GUILayout.Space(5);
materialEditor.TexturePropertySingleLine(new GUIContent("Occlusion Map", "Occlusion Map, used to darken areas on the model artifically."), _OcclusionMap);
XSStyles.constrainedShaderProperty(materialEditor, _OcclusionColor, new GUIContent("Occlusion Tint", "Occlusion shadow tint."), 2);
materialEditor.ShaderProperty(_UVSetOcclusion, new GUIContent("UV Set", "The UV set to use for the Occlusion Texture"), 2);
materialEditor.TextureScaleOffsetProperty(_OcclusionMap);
GUILayout.Space(5);
XSStyles.constrainedShaderProperty(materialEditor, _ShadowRim, new GUIContent("Shadow Rim", "Shadow Rim Color. Set to white to disable."), 0);
materialEditor.ShaderProperty(_ShadowRimRange, new GUIContent("Range", "Range of the Shadow Rim"), 2);
materialEditor.ShaderProperty(_ShadowRimThreshold, new GUIContent("Threshold", "Threshold of the Shadow Rim"), 2);
materialEditor.ShaderProperty(_ShadowRimSharpness, new GUIContent("Sharpness", "Sharpness of the Shadow Rim"), 2);
XSStyles.callGradientEditor(material);
}
if (isOutlined)
{
showOutlines = XSStyles.ShurikenFoldout("Outlines", showOutlines);
if (showOutlines)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Outline Mask", "Outline width mask, black will make the outline minimum width."), _OutlineMask);
materialEditor.ShaderProperty(_OutlineWidth, new GUIContent("Outline Width", "Width of the Outlines"));
XSStyles.constrainedShaderProperty(materialEditor, _OutlineColor, new GUIContent("Outline Color", "Color of the outlines"), 0);
}
}
showNormalMapSettings = XSStyles.ShurikenFoldout("Normal Maps", showNormalMapSettings);
if (showNormalMapSettings)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Normal Map", "Normal Map"), _BumpMap);
materialEditor.ShaderProperty(_BumpScale, new GUIContent("Normal Strength", "Strength of the main Normal Map"), 2);
materialEditor.ShaderProperty(_UVSetNormal, new GUIContent("UV Set", "The UV set to use for the Normal Map"), 2);
materialEditor.TextureScaleOffsetProperty(_BumpMap);
GUILayout.Space(5);
materialEditor.TexturePropertySingleLine(new GUIContent("Detail Normal Map", "Detail Normal Map"), _DetailNormalMap);
materialEditor.ShaderProperty(_DetailNormalMapScale, new GUIContent("Detail Normal Strength", "Strength of the detail Normal Map"), 2);
materialEditor.ShaderProperty(_UVSetDetNormal, new GUIContent("UV Set", "The UV set to use for the Detail Normal Map"), 2);
materialEditor.TextureScaleOffsetProperty(_DetailNormalMap);
GUILayout.Space(5);
materialEditor.TexturePropertySingleLine(new GUIContent("Detail Mask", "Mask for Detail Normal Map"), _DetailMask);
materialEditor.ShaderProperty(_UVSetDetMask, new GUIContent("UV Set", "The UV set to use for the Detail Mask"), 2);
materialEditor.TextureScaleOffsetProperty(_DetailMask);
}
showSpecular = XSStyles.ShurikenFoldout("Specular", showSpecular);
if (showSpecular)
{
materialEditor.ShaderProperty(_SpecMode, new GUIContent("Specular Mode", "Specular Mode."));
materialEditor.ShaderProperty(_SpecularStyle, new GUIContent("Specular Style", "Specular Style."));
materialEditor.TexturePropertySingleLine(new GUIContent("Specular Map(R,G,B)", "Specular Map. Red channel controls Intensity, Green controls how much specular is tinted by Albedo, and Blue controls Smoothness (Only for Blinn-Phong, and GGX)."), _SpecularMap);
materialEditor.TextureScaleOffsetProperty(_SpecularMap);
materialEditor.ShaderProperty(_UVSetSpecular, new GUIContent("UV Set", "The UV set to use for the Specular Map"), 2);
materialEditor.ShaderProperty(_SpecularIntensity, new GUIContent("Specular Intensity", "Specular Intensity."), 2);
materialEditor.ShaderProperty(_SpecularAlbedoTint, new GUIContent("Specular Albedo Tint", "How much the specular highlight should derive color from the albedo of the object."), 2);
if (_SpecMode.floatValue == 0 || _SpecMode.floatValue == 2)
{
materialEditor.ShaderProperty(_SpecularArea, new GUIContent("Specular Area", "Specular Area."), 2);
}
else
{
materialEditor.ShaderProperty(_AnisotropicAX, new GUIContent("Anisotropic Width", "Anisotropic Width, makes anistropic relfections more horizontal"), 2);
materialEditor.ShaderProperty(_AnisotropicAY, new GUIContent("Anisotropic Height", "Anisotropic Height, makes anistropic relfections more vertical"), 2);
}
}
showReflection = XSStyles.ShurikenFoldout("Reflections", showReflection);
if (showReflection)
{
materialEditor.ShaderProperty(_ReflectionMode, new GUIContent("Reflection Mode", "Reflection Mode."));
if (_ReflectionMode.floatValue == 0) // PBR
{
materialEditor.ShaderProperty(_ReflectionBlendMode, new GUIContent("Reflection Blend Mode", "Blend mode for reflection. Additive is Color + reflection, Multiply is Color * reflection, and subtractive is Color - reflection"));
materialEditor.ShaderProperty(_ClearCoat, new GUIContent("Clearcoat", "Clearcoat"));
materialEditor.TexturePropertySingleLine(new GUIContent("Fallback Cubemap", " Used as fallback in 'Unity' reflection mode if reflection probe is black."), _BakedCubemap);
materialEditor.TexturePropertySingleLine(new GUIContent("Metallic Map", "Metallic Map, Metallic on Red Channel, Smoothness on Alpha Channel. \nIf Clearcoat is enabled, Clearcoat Smoothness on Green Channel, Clearcoat Reflectivity on Blue Channel."), _MetallicGlossMap);
materialEditor.TextureScaleOffsetProperty(_MetallicGlossMap);
materialEditor.ShaderProperty(_UVSetMetallic, new GUIContent("UV Set", "The UV set to use for the Metallic Smoothness Map"), 2);
materialEditor.ShaderProperty(_Metallic, new GUIContent("Metallic", "Metallic, set to 1 if using metallic map"), 2);
materialEditor.ShaderProperty(_Glossiness, new GUIContent("Smoothness", "Smoothness, set to 1 if using metallic map"), 2);
materialEditor.ShaderProperty(_ClearcoatSmoothness, new GUIContent("Clearcoat Smoothness", "Smoothness of the clearcoat."), 2);
materialEditor.ShaderProperty(_ClearcoatStrength, new GUIContent("Clearcoat Reflectivity", "The strength of the clearcoat reflection."), 2);
}
else if (_ReflectionMode.floatValue == 1) //Baked cube
{
materialEditor.ShaderProperty(_ReflectionBlendMode, new GUIContent("Reflection Blend Mode", "Blend mode for reflection. Additive is Color + reflection, Multiply is Color * reflection, and subtractive is Color - reflection"));
materialEditor.ShaderProperty(_ClearCoat, new GUIContent("Clearcoat", "Clearcoat"));
materialEditor.TexturePropertySingleLine(new GUIContent("Baked Cubemap", "Baked cubemap."), _BakedCubemap);
materialEditor.TexturePropertySingleLine(new GUIContent("Metallic Map", "Metallic Map, Metallic on Red Channel, Smoothness on Alpha Channel. \nIf Clearcoat is enabled, Clearcoat Smoothness on Green Channel, Clearcoat Reflectivity on Blue Channel."), _MetallicGlossMap);
materialEditor.TextureScaleOffsetProperty(_MetallicGlossMap);
materialEditor.ShaderProperty(_UVSetMetallic, new GUIContent("UV Set", "The UV set to use for the MetallicSmoothness Map"), 2);
materialEditor.ShaderProperty(_Metallic, new GUIContent("Metallic", "Metallic, set to 1 if using metallic map"), 2);
materialEditor.ShaderProperty(_Glossiness, new GUIContent("Smoothness", "Smoothness, set to 1 if using metallic map"), 2);
materialEditor.ShaderProperty(_ClearcoatSmoothness, new GUIContent("Clearcoat Smoothness", "Smoothness of the clearcoat."), 2);
materialEditor.ShaderProperty(_ClearcoatStrength, new GUIContent("Clearcoat Reflectivity", "The strength of the clearcoat reflection."), 2);
}
else if (_ReflectionMode.floatValue == 2) //Matcap
{
materialEditor.ShaderProperty(_ReflectionBlendMode, new GUIContent("Reflection Blend Mode", "Blend mode for reflection. Additive is Color + reflection, Multiply is Color * reflection, and subtractive is Color - reflection"));
materialEditor.TexturePropertySingleLine(new GUIContent("Matcap", "Matcap Texture"), _Matcap, _MatcapTint);
materialEditor.ShaderProperty(_Glossiness, new GUIContent("Matcap Blur", "Matcap blur, blurs the Matcap, set to 1 for full clarity"), 2);
material.SetFloat("_Metallic", 0);
material.SetFloat("_ClearCoat", 0);
material.SetTexture("_MetallicGlossMap", null);
}
if (_ReflectionMode.floatValue != 3)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Reflectivity Mask", "Mask for reflections."), _ReflectivityMask);
materialEditor.TextureScaleOffsetProperty(_ReflectivityMask);
materialEditor.ShaderProperty(_UVSetReflectivity, new GUIContent("UV Set", "The UV set to use for the Reflectivity Mask"), 2);
materialEditor.ShaderProperty(_Reflectivity, new GUIContent("Reflectivity", "The strength of the reflections."), 2);
}
if (_ReflectionMode.floatValue == 3)
{
material.SetFloat("_Metallic", 0);
material.SetFloat("_ReflectionBlendMode", 0);
material.SetFloat("_ClearCoat", 0);
}
}
showEmission = XSStyles.ShurikenFoldout("Emission", showEmission);
if (showEmission)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Emission Map", "Emissive map. White to black, unless you want multiple colors."), _EmissionMap, _EmissionColor);
materialEditor.TextureScaleOffsetProperty(_EmissionMap);
materialEditor.ShaderProperty(_UVSetEmission, new GUIContent("UV Set", "The UV set to use for the Emission Map"), 2);
materialEditor.ShaderProperty(_EmissionToDiffuse, new GUIContent("Tint To Diffuse", "Tints the emission to the Diffuse Color"), 2);
GUILayout.Space(5);
materialEditor.ShaderProperty(_ScaleWithLight, new GUIContent("Scale w/ Light", "Scales the emission intensity based on how dark or bright the environment is."));
if (_ScaleWithLight.floatValue == 0)
{
materialEditor.ShaderProperty(_ScaleWithLightSensitivity, new GUIContent("Scaling Sensitivity", "How agressively the emission should scale with the light."));
}
}
showRimlight = XSStyles.ShurikenFoldout("Rimlight", showRimlight);
if (showRimlight)
{
materialEditor.ShaderProperty(_RimColor, new GUIContent("Rimlight Tint", "The Tint of the Rimlight."));
materialEditor.ShaderProperty(_RimIntensity, new GUIContent("Rimlight Intensity", "Strength of the Rimlight."));
materialEditor.ShaderProperty(_RimRange, new GUIContent("Range", "Range of the Rim"), 2);
materialEditor.ShaderProperty(_RimThreshold, new GUIContent("Threshold", "Threshold of the Rim"), 2);
materialEditor.ShaderProperty(_RimSharpness, new GUIContent("Sharpness", "Sharpness of the Rim"), 2);
}
showSubsurface = XSStyles.ShurikenFoldout("Subsurface Scattering", showSubsurface);
if (showSubsurface)
{
materialEditor.TexturePropertySingleLine(new GUIContent("Thickness Map", "Thickness Map, used to mask areas where subsurface can happen"), _ThicknessMap);
materialEditor.TextureScaleOffsetProperty(_ThicknessMap);
materialEditor.ShaderProperty(_UVSetThickness, new GUIContent("UV Set", "The UV set to use for the Thickness Map"), 2);
XSStyles.constrainedShaderProperty(materialEditor, _SSColor, new GUIContent("Subsurface Color", "Subsurface Scattering Color"), 2);
materialEditor.ShaderProperty(_SSDistortion, new GUIContent("Subsurface Distortion", "How much the subsurface follows the normals of the mesh, Normal map."), 2);
materialEditor.ShaderProperty(_SSPower, new GUIContent("Subsurface Power", "Subsurface Power"), 2);
materialEditor.ShaderProperty(_SSScale, new GUIContent("Subsurface Scale", "Subsurface Scale"), 2);
materialEditor.ShaderProperty(_SSSRange, new GUIContent("Subsurface Range", "Subsurface Range"), 2);
materialEditor.ShaderProperty(_SSSSharpness, new GUIContent("Subsurface Sharpness", "Subsurface Sharpness"), 2);
}
if (_AdvMode.floatValue == 1)
{
showAdvanced = XSStyles.ShurikenFoldout("Advanced Settings", showAdvanced);
if (showAdvanced)
{
materialEditor.ShaderProperty(_Stencil, _Stencil.displayName);
materialEditor.ShaderProperty(_StencilComp, _StencilComp.displayName);
materialEditor.ShaderProperty(_StencilOp, _StencilOp.displayName);
}
}
XSStyles.DoFooter();
}
}
private void DrawReflectionsSettings(MaterialEditor materialEditor, Material material)
{
showReflection = XSStyles.ShurikenFoldout("Reflections", showReflection);
if (showReflection)
{
materialEditor.ShaderProperty(_ReflectionMode, new GUIContent("Reflection Mode", "Reflection Mode."));
if (_ReflectionMode.floatValue == 0) // PBR
{
materialEditor.ShaderProperty(_ReflectionBlendMode, new GUIContent("Reflection Blend Mode", "Blend mode for reflection. Additive is Color + reflection, Multiply is Color * reflection, and subtractive is Color - reflection"));
materialEditor.ShaderProperty(_ClearCoat, new GUIContent("Clearcoat", "Clearcoat"));
XSStyles.SeparatorThin();
materialEditor.TexturePropertySingleLine(new GUIContent("Fallback Cubemap", " Used as fallback in 'Unity' reflection mode if reflection probe is black."), _BakedCubemap);
XSStyles.SeparatorThin();
materialEditor.TexturePropertySingleLine(new GUIContent("Metallic Map", "Metallic Map, Metallic on Red Channel, Smoothness on Alpha Channel. \nIf Clearcoat is enabled, Clearcoat Smoothness on Green Channel, Clearcoat Reflectivity on Blue Channel."), _MetallicGlossMap);
materialEditor.TextureScaleOffsetProperty(_MetallicGlossMap);
materialEditor.ShaderProperty(_UVSetMetallic, new GUIContent("UV Set", "The UV set to use for the Metallic Smoothness Map"), 2);
materialEditor.ShaderProperty(_Metallic, new GUIContent("Metallic", "Metallic, set to 1 if using metallic map"), 2);
materialEditor.ShaderProperty(_Glossiness, new GUIContent("Smoothness", "Smoothness, set to 1 if using metallic map"), 2);
materialEditor.ShaderProperty(_ClearcoatSmoothness, new GUIContent("Clearcoat Smoothness", "Smoothness of the clearcoat."), 2);
materialEditor.ShaderProperty(_ClearcoatStrength, new GUIContent("Clearcoat Reflectivity", "The strength of the clearcoat reflection."), 2);
}
else if (_ReflectionMode.floatValue == 1) //Baked cube
{
materialEditor.ShaderProperty(_ReflectionBlendMode, new GUIContent("Reflection Blend Mode", "Blend mode for reflection. Additive is Color + reflection, Multiply is Color * reflection, and subtractive is Color - reflection"));
materialEditor.ShaderProperty(_ClearCoat, new GUIContent("Clearcoat", "Clearcoat"));
XSStyles.SeparatorThin();
materialEditor.TexturePropertySingleLine(new GUIContent("Baked Cubemap", "Baked cubemap."), _BakedCubemap);
XSStyles.SeparatorThin();
materialEditor.TexturePropertySingleLine(new GUIContent("Metallic Map", "Metallic Map, Metallic on Red Channel, Smoothness on Alpha Channel. \nIf Clearcoat is enabled, Clearcoat Smoothness on Green Channel, Clearcoat Reflectivity on Blue Channel."), _MetallicGlossMap);
materialEditor.TextureScaleOffsetProperty(_MetallicGlossMap);
materialEditor.ShaderProperty(_UVSetMetallic, new GUIContent("UV Set", "The UV set to use for the MetallicSmoothness Map"), 2);
materialEditor.ShaderProperty(_Metallic, new GUIContent("Metallic", "Metallic, set to 1 if using metallic map"), 2);
materialEditor.ShaderProperty(_Glossiness, new GUIContent("Smoothness", "Smoothness, set to 1 if using metallic map"), 2);
materialEditor.ShaderProperty(_ClearcoatSmoothness, new GUIContent("Clearcoat Smoothness", "Smoothness of the clearcoat."), 2);
materialEditor.ShaderProperty(_ClearcoatStrength, new GUIContent("Clearcoat Reflectivity", "The strength of the clearcoat reflection."), 2);
}
else if (_ReflectionMode.floatValue == 2) //Matcap
{
materialEditor.ShaderProperty(_ReflectionBlendMode, new GUIContent("Reflection Blend Mode", "Blend mode for reflection. Additive is Color + reflection, Multiply is Color * reflection, and subtractive is Color - reflection"));
XSStyles.SeparatorThin();
materialEditor.TexturePropertySingleLine(new GUIContent("Matcap", "Matcap Texture"), _Matcap, _MatcapTint);
materialEditor.ShaderProperty(_Glossiness, new GUIContent("Matcap Blur", "Matcap blur, blurs the Matcap, set to 1 for full clarity"), 2);
materialEditor.ShaderProperty(_MatcapTintToDiffuse, new GUIContent("Tint To Diffuse", "Tints matcap to diffuse color."), 2);
material.SetFloat("_Metallic", 0);
material.SetFloat("_ClearCoat", 0);
material.SetTexture("_MetallicGlossMap", null);
}
if (_ReflectionMode.floatValue != 3)
{
XSStyles.SeparatorThin();
materialEditor.TexturePropertySingleLine(new GUIContent("Reflectivity Mask", "Mask for reflections."), _ReflectivityMask);
materialEditor.TextureScaleOffsetProperty(_ReflectivityMask);
materialEditor.ShaderProperty(_UVSetReflectivity, new GUIContent("UV Set", "The UV set to use for the Reflectivity Mask"), 2);
materialEditor.ShaderProperty(_Reflectivity, new GUIContent("Reflectivity", "The strength of the reflections."), 2);
}
if (_ReflectionMode.floatValue == 3)
{
material.SetFloat("_Metallic", 0);
material.SetFloat("_ReflectionBlendMode", 0);
material.SetFloat("_ClearCoat", 0);
}
}
}