protected void AddChildElements()
{
addButton = textImageButtonFactory.GenerateTooltipButton("Add".Localize(), StaticData.Instance.LoadIcon("icon_circle_plus.png", 32, 32).InvertLightness());
addButton.ToolTipText = "Add a file to be printed".Localize();
addButton.Margin = new BorderDouble(6, 6, 6, 3);
startButton = textImageButtonFactory.GenerateTooltipButton("Print".Localize(), StaticData.Instance.LoadIcon("icon_play_32x32.png", 32, 32).InvertLightness());
startButton.Name = "Start Print Button";
startButton.ToolTipText = "Begin printing the selected item.".Localize();
startButton.Margin = new BorderDouble(6, 6, 6, 3);
startButton.Click += onStartButton_Click;
configureButton = textImageButtonFactory.GenerateTooltipButton("Finish Setup...".Localize());
configureButton.Name = "Finish Setup Button";
configureButton.ToolTipText = "Run setup configuration for printer.".Localize();
configureButton.Margin = new BorderDouble(6, 6, 6, 3);
configureButton.Click += onStartButton_Click;
connectButton = textImageButtonFactory.GenerateTooltipButton("Connect".Localize(), StaticData.Instance.LoadIcon("icon_power_32x32.png", 32, 32).InvertLightness());
connectButton.ToolTipText = "Connect to the printer".Localize();
connectButton.Margin = new BorderDouble(6, 6, 6, 3);
connectButton.Click += (s, e) =>
{
if (ActiveSliceSettings.Instance.PrinterSelected)
{
#if __ANDROID__
if (!FrostedSerialPort.HasPermissionToDevice())
{
// Opens the USB device permissions dialog which will call back into our UsbDevice broadcast receiver to connect
FrostedSerialPort.RequestPermissionToDevice(RunTroubleShooting);
}
else
#endif
{
PrinterConnectionAndCommunication.Instance.HaltConnectionThread();
PrinterConnectionAndCommunication.Instance.ConnectToActivePrinter(true);
}
}
};
addPrinterButton = textImageButtonFactory.GenerateTooltipButton("Add Printer".Localize());
addPrinterButton.ToolTipText = "Select and add a new printer.".Localize();
addPrinterButton.Margin = new BorderDouble(6, 6, 6, 3);
addPrinterButton.Click += (s, e) =>
{
UiThread.RunOnIdle(() => WizardWindow.ShowPrinterSetup(true));
};
selectPrinterButton = textImageButtonFactory.GenerateTooltipButton("Select Printer".Localize());
selectPrinterButton.ToolTipText = "Select an existing printer.".Localize();
selectPrinterButton.Margin = new BorderDouble(6, 6, 6, 3);
selectPrinterButton.Click += (s, e) =>
{
WizardWindow.Show <SetupOptionsPage>("/SetupOptions", "Setup Wizard");
};
string resetConnectionButtontText = "Reset".Localize();
string resetConnectionButtonMessage = "Reboots the firmware on the controller".Localize();
resetConnectionButton = textImageButtonFactory.GenerateTooltipButton(resetConnectionButtontText, StaticData.Instance.LoadIcon("e_stop4.png", 32, 32).InvertLightness());
resetConnectionButton.ToolTipText = resetConnectionButtonMessage;
resetConnectionButton.ToolTipText = resetConnectionButtonMessage;
resetConnectionButton.Margin = new BorderDouble(6, 6, 6, 3);
string skipButtonText = "Skip".Localize();
string skipButtonMessage = "Skip the current item and move to the next in queue".Localize();
skipButton = makeButton(skipButtonText, skipButtonMessage);
string removeButtonText = "Remove".Localize();
string removeButtonMessage = "Remove current item from queue".Localize();
removeButton = makeButton(removeButtonText, removeButtonMessage);
removeButton.Click += onRemoveButton_Click;
string pauseButtonText = "Pause".Localize();
string pauseButtonMessage = "Pause the current print".Localize();
pauseButton = makeButton(pauseButtonText, pauseButtonMessage);
pauseButton.Click += (s, e) =>
{
PrinterConnectionAndCommunication.Instance.RequestPause();
pauseButton.Enabled = false;
};
this.AddChild(pauseButton);
allPrintButtons.Add(pauseButton);
string cancelCancelButtonText = "Cancel Connect".Localize();
string cancelConnectButtonMessage = "Stop trying to connect to the printer.".Localize();
cancelConnectButton = makeButton(cancelCancelButtonText, cancelConnectButtonMessage);
string cancelButtonText = "Cancel".Localize();
string cancelButtonMessage = "Stop the current print".Localize();
cancelButton = makeButton(cancelButtonText, cancelButtonMessage);
cancelButton.Name = "Cancel Print Button";
string resumeButtonText = "Resume".Localize();
string resumeButtonMessage = "Resume the current print".Localize();
resumeButton = makeButton(resumeButtonText, resumeButtonMessage);
resumeButton.Name = "Resume Button";
resumeButton.Click += (s, e) =>
{
if (PrinterConnectionAndCommunication.Instance.PrinterIsPaused)
{
PrinterConnectionAndCommunication.Instance.Resume();
}
pauseButton.Enabled = true;
};
this.AddChild(resumeButton);
allPrintButtons.Add(resumeButton);
string reprintButtonText = "Print Again".Localize();
string reprintButtonMessage = "Print current item again".Localize();
reprintButton = makeButton(reprintButtonText, reprintButtonMessage);
reprintButton.Name = "Print Again Button";
string doneCurrentPartButtonText = "Done".Localize();
string doenCurrentPartButtonMessage = "Move to next print in queue".Localize();
doneWithCurrentPartButton = makeButton(doneCurrentPartButtonText, doenCurrentPartButtonMessage);
doneWithCurrentPartButton.Name = "Done Button";
this.Margin = new BorderDouble(0, 0, 10, 0);
this.HAnchor = HAnchor.FitToChildren;
this.AddChild(connectButton);
allPrintButtons.Add(connectButton);
this.AddChild(addPrinterButton);
allPrintButtons.Add(addPrinterButton);
this.AddChild(selectPrinterButton);
allPrintButtons.Add(selectPrinterButton);
this.AddChild(addButton);
allPrintButtons.Add(addButton);
this.AddChild(startButton);
allPrintButtons.Add(startButton);
this.AddChild(configureButton);
allPrintButtons.Add(configureButton);
this.AddChild(doneWithCurrentPartButton);
allPrintButtons.Add(doneWithCurrentPartButton);
this.AddChild(skipButton);
allPrintButtons.Add(skipButton);
this.AddChild(cancelButton);
allPrintButtons.Add(cancelButton);
this.AddChild(cancelConnectButton);
allPrintButtons.Add(cancelConnectButton);
this.AddChild(reprintButton);
allPrintButtons.Add(reprintButton);
this.AddChild(removeButton);
allPrintButtons.Add(removeButton);
this.AddChild(resetConnectionButton);
allPrintButtons.Add(resetConnectionButton);
SetButtonStates();
}
protected void AddChildElements()
{
actionBarButtonFactory.invertImageLocation = false;
actionBarButtonFactory.borderWidth = 1;
if (ActiveTheme.Instance.IsDarkTheme)
{
actionBarButtonFactory.normalBorderColor = new RGBA_Bytes(77, 77, 77);
}
else
{
actionBarButtonFactory.normalBorderColor = new RGBA_Bytes(190, 190, 190);
}
actionBarButtonFactory.hoverBorderColor = new RGBA_Bytes(128, 128, 128);
// connect and disconnect buttons
{
connectPrinterButton = actionBarButtonFactory.Generate("Connect".Localize().ToUpper(), "icon_power_32x32.png");
connectPrinterButton.Name = "Connect to printer button";
connectPrinterButton.ToolTipText = "Connect to the currently selected printer".Localize();
connectPrinterButton.Margin = new BorderDouble(6, 0, 3, 3);
connectPrinterButton.VAnchor = VAnchor.ParentTop;
connectPrinterButton.Cursor = Cursors.Hand;
connectPrinterButton.Click += (s, e) =>
{
Button buttonClicked = ((Button)s);
if (buttonClicked.Enabled)
{
if (ActiveSliceSettings.Instance.PrinterSelected)
{
UserRequestedConnectToActivePrinter();
}
}
};
disconnectPrinterButton = actionBarButtonFactory.Generate("Disconnect".Localize().ToUpper(), "icon_power_32x32.png");
disconnectPrinterButton.ToolTipText = "Disconnect from current printer".Localize();
disconnectPrinterButton.Margin = new BorderDouble(6, 0, 3, 3);
disconnectPrinterButton.VAnchor = VAnchor.ParentTop;
disconnectPrinterButton.Cursor = Cursors.Hand;
disconnectPrinterButton.Click += (s, e) => UiThread.RunOnIdle(OnIdleDisconnect);
actionBarButtonFactory.invertImageLocation = true;
this.AddChild(connectPrinterButton);
this.AddChild(disconnectPrinterButton);
}
// printer selector and edit button
{
GuiWidget container = new GuiWidget()
{
HAnchor = HAnchor.ParentLeftRight,
VAnchor = VAnchor.FitToChildren,
};
FlowLayoutWidget printerSelectorAndEditButton = new FlowLayoutWidget()
{
HAnchor = HAnchor.ParentLeftRight,
};
printerSelector = new PrinterSelector()
{
HAnchor = HAnchor.ParentLeftRight,
Cursor = Cursors.Hand,
Margin = new BorderDouble(0, 6, 0, 3)
};
printerSelector.AddPrinter += (s, e) => WizardWindow.ShowPrinterSetup(true);
// make sure the control can get smaller but maintains its height
printerSelector.MinimumSize = new Vector2(0, connectPrinterButton.MinimumSize.y);
printerSelectorAndEditButton.AddChild(printerSelector);
editPrinterButton = TextImageButtonFactory.GetThemedEditButton();
editPrinterButton.Name = "Edit Printer Button";
editPrinterButton.VAnchor = VAnchor.ParentCenter;
editPrinterButton.Click += UiNavigation.OpenEditPrinterWizard_Click;
printerSelectorAndEditButton.AddChild(editPrinterButton);
container.AddChild(printerSelectorAndEditButton);
printerSelectorAndEditOverlay = new GuiWidget()
{
HAnchor = HAnchor.ParentLeftRight,
VAnchor = VAnchor.ParentBottomTop,
Selectable = false,
};
container.AddChild(printerSelectorAndEditOverlay);
this.AddChild(container);
}
// reset connection button
{
string resetConnectionText = "Reset\nConnection".Localize().ToUpper();
Button resetConnectionButton = actionBarButtonFactory.Generate(resetConnectionText, "e_stop4.png");
resetConnectionButton.Margin = new BorderDouble(6, 0, 3, 3);
this.AddChild(resetConnectionButton);
resetConnectionButton.Click += new EventHandler((s, e) => PrinterConnectionAndCommunication.Instance.RebootBoard());
resetConnectionButton.Visible = ActiveSliceSettings.Instance.GetValue <bool>(SettingsKey.show_reset_connection);
SliceSettingsWidget.SettingChanged.RegisterEvent((sender, e) =>
{
StringEventArgs stringEvent = e as StringEventArgs;
if (stringEvent != null)
{
if (stringEvent.Data == SettingsKey.show_reset_connection)
{
resetConnectionButton.Visible = ActiveSliceSettings.Instance.GetValue <bool>(SettingsKey.show_reset_connection);
}
}
}, ref unregisterEvents);
}
// Bind connect button states to active printer state
this.SetConnectionButtonVisibleState();
ActiveSliceSettings.ActivePrinterChanged.RegisterEvent(onActivePrinterChanged, ref unregisterEvents);
PrinterConnectionAndCommunication.Instance.EnableChanged.RegisterEvent(onPrinterStatusChanged, ref unregisterEvents);
PrinterConnectionAndCommunication.Instance.CommunicationStateChanged.RegisterEvent(onPrinterStatusChanged, ref unregisterEvents);
}