makeSurface(string strSurfaceName)
{
SelectionSet objSSet = EW_Utility1.buildSSet2a(strSurfaceName);
if (objSSet == null || objSSet.Count == 0)
{
return;
}
ObjectId[] ids = objSSet.GetObjectIds();
ObjectIdCollection idsBrks = new ObjectIdCollection();
foreach (ObjectId id in ids)
{
idsBrks.Add(id);
}
EW_CheckSurfaceStyles.checkSurfaceStyles(strSurfaceName);
TinSurface objSurface = Surf.getTinSurface(strSurfaceName);
if (objSurface == null)
{
return;
}
objSurface.ObjectId.delete();
objSurface = Surf.addTinSurface(strSurfaceName, out exists);
objSurface.BreaklinesDefinition.AddStandardBreaklines(idsBrks, 1.0, 0, 0, 0);
objSurface.BuildOptions.CrossingBreaklinesElevationOption = Autodesk.Civil.CrossingBreaklinesElevationType.UseAverage;
SelectionSet objSSetLim = EW_Utility1.buildSSetGradingLim();
if (objSSetLim.Count == 0)
{
MessageBox.Show("GRADING LIMIT not found - OUTER BOUNDARY not added.");
return;
}
ObjectId idLWPline = objSSetLim.GetObjectIds()[0];
Conv.processBndry(idLWPline);
ObjectId[] id3dPoly = { Conv.poly_Poly3d(idLWPline, 0, "0") };
objSurface.BoundariesDefinition.AddBoundaries(new ObjectIdCollection(id3dPoly), 1.0, Autodesk.Civil.SurfaceBoundaryType.Outer, true);
objSurface.Rebuild();
id3dPoly[0].delete();
}
modSurface(string nameSurface, string descSurface, ObjectIdCollection idsPoly3d, bool boolNewSurface)
{
bool exists = false;
TinSurface objSurface = Surf.getTinSurface(nameSurface, out exists);
if (!exists)
{
objSurface.StyleId = Surf_Styles.getSurfaceStyle(nameSurface);
}
objSurface.BreaklinesDefinition.AddStandardBreaklines(idsPoly3d, 1, 0, 0, 0);
objSurface.BuildOptions.CrossingBreaklinesElevationOption = Autodesk.Civil.CrossingBreaklinesElevationType.UseAverage;
objSurface.Rebuild();
}
public void AddBoundaryToSurfaceHide()
{
Editor ed = acadDoc.Editor;
ObjectId[] boundaries = { border };
try
{
ts.BoundariesDefinition.AddBoundaries(
new ObjectIdCollection(boundaries), 100, Autodesk.Civil.SurfaceBoundaryType.Hide, true);
ts.Rebuild();
}
catch (System.Exception e)
{
ed.WriteMessage("Failed to add the boundary: {0}", e.Message);
}
}
public static void makeSurfaceBOT()
{
string strSurfaceName = "BOT";
EW_CheckSurfaceStyles.checkSurfaceStyles(strSurfaceName);
Surf.removeSurface("BOT");
TinSurface objSurfaceBOT = Surf.addTinSurface("BOT", out exists);
ObjectId idCivilPntGrp = CgPnt_Group.checkPntGroup("BOT");
objSurfaceBOT.PointGroupsDefinition.AddPointGroup(idCivilPntGrp);
SelectionSet objSSet = EW_Utility1.buildSSet13();
ObjectId[] idsBrksArray = objSSet.GetObjectIds();
ObjectIdCollection idsBrks = new ObjectIdCollection();
foreach (ObjectId id in idsBrksArray)
{
idsBrks.Add(id);
}
objSurfaceBOT.BreaklinesDefinition.AddStandardBreaklines(idsBrks, 1.0, 0, 0, 0);
ObjectId idLWPline = EW_Utility1.buildSSetGradingLim().GetObjectIds()[0];
if (idLWPline != ObjectId.Null)
{
ObjectIdCollection ids = new ObjectIdCollection();
ids.Add(idLWPline);
objSurfaceBOT.BoundariesDefinition.AddBoundaries(ids, 1, Autodesk.Civil.SurfaceBoundaryType.Outer, true);
objSurfaceBOT.Rebuild();
}
else
{
MessageBox.Show("GRADING LIMIT not found - OUTER BOUNDARY not added.");
}
}
RBA()
{
Surface surface = null;
try
{
using (Transaction tr = BaseObjs.startTransactionDoc())
{
ObjectIdCollection ids = BaseObjs._civDoc.GetSurfaceIds();
if (ids.Count == 0)
{
return;
}
foreach (ObjectId id in ids)
{
try
{
surface = (Surface)tr.GetObject(id, OpenMode.ForRead);
if (surface is TinSurface)
{
TinSurface tinSurface = (TinSurface)surface;
tinSurface.UpgradeOpen();
tinSurface.Rebuild();
tinSurface.DowngradeOpen();
}
}
catch (System.Exception ex)
{
BaseObjs.writeDebug(ex.Message + " cmdRB.cs: line: 71");
}
}
tr.Commit();
}
}
catch (System.Exception ex)
{
BaseObjs.writeDebug(ex.Message + " cmdRB.cs: line: 79");
}
}
makeRemSurface(double dblDepth)
{
EW_CheckSurfaceStyles.checkSurfaceStyles("EXIST");
Point3d pnt3dMove0 = Point3d.Origin;
Point3d pnt3dMoveX = new Point3d(0, 0, dblDepth * -1);
Matrix3d mtx3d = Matrix3d.Displacement(pnt3dMoveX - pnt3dMove0);
TinSurface objSurfaceExist = Surf.getTinSurface("EXIST");
ObjectId idSurface = objSurfaceExist.copy();
using (var tr = BaseObjs.startTransactionDb()) {
TinSurface surface = (TinSurface)tr.GetObject(idSurface, OpenMode.ForWrite);
surface.Name = "EG-ADJ2";
Layer.manageLayers("EG-ADJ2-SURFACE");
surface.Layer = "EG-ADJ2" + "-SURFACE";
surface.TransformBy(mtx3d);
surface.Rebuild();
}
}
RB()
{
bool exists = false;
ObjectIdCollection ids = BaseObjs._acadDoc.getBrkLines();
ObjectIdCollection idsF = BaseObjs._acadDoc.getFeatureLines();
foreach (ObjectId id in idsF)
{
ids.Add(id);
}
ObjectId idSurface = Base_Tools45.C3D.Surf.getSurface("CPNT-ON", out exists);
Point3dCollection pnts3d = mySurfaces.getOuterBoundary("CPNT-ON");
Layer.manageLayers("CPNT-BNDRY");
ObjectId idPoly = pnts3d.addPoly("CPNT-BNDRY");
ObjectIdCollection idsBndry = new ObjectIdCollection {
idPoly
};
try
{
using (Transaction tr = BaseObjs.startTransactionDb())
{
TinSurface tinSurface = (TinSurface)tr.GetObject(idSurface, OpenMode.ForWrite);
tinSurface.deleteBreaklines();
tinSurface.BreaklinesDefinition.AddStandardBreaklines(ids, 1.0, 0.0, 0.0, 0.0);
tinSurface.BoundariesDefinition.AddBoundaries(idsBndry, 1.0, Autodesk.Civil.SurfaceBoundaryType.Outer, true);
tinSurface.Rebuild();
tr.Commit();
}
}
catch (System.Exception ex)
{
BaseObjs.writeDebug(ex.Message + " cmdRB.cs: line: 41");
}
}
//[CommandMethod("AddDataToSurfaces")]
/// <summary>
/// Adding data from PlanFeatures (character lines) to surfaces and also inser PointsCogoGrous to surfaces
/// </summary>
/// <param name="midOrdinate"></param>
/// <param name="maxDist"></param>
/// <param name="weedingDist"></param>
/// <param name="weedingAngle"></param>
public static void AddDataToSurfaces(double midOrdinate = 0.1, double maxDist = 10.0, double weedingDist = 0.1, double weedingAngle = 0.5)
{
//Document doc = doc_dyn.AcDocument;
var CivilApp = CivilApplication.ActiveDocument;
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
//double midOrdinate = 0.1; double maxDist = 10.0; double weedingDist = 0.1; double weedingAngle = 0.5; -- if start as CommandMethod
using (Transaction ts = db.TransactionManager.StartTransaction())
{
try
{
foreach (ObjectId OneSiteItem in CivilApp.GetSiteIds())
{
Site OneSite = ts.GetObject(OneSiteItem, OpenMode.ForRead) as Site;
string Site_Name = OneSite.Name;
//ed.WriteMessage("\n Site_Name =" + Site_Name);
foreach (ObjectId OneSurfaceId in CivilApp.GetSurfaceIds())
{
//ObjectId SurfaceId = new ObjectId();
TinSurface CurrentSurface = ts.GetObject(OneSurfaceId, OpenMode.ForWrite) as TinSurface;
//ed.WriteMessage("\n OneSurf.Name =" + CurrentSurface.Name);
if (CurrentSurface.Name == Site_Name)
{
ed.WriteMessage($"\n Site with surface's name {CurrentSurface.Name} is exist!");
//ed.WriteMessage("\n Start adding standard breaklines for " + CurrentSurface.Name);
AddBreakLines(null);
//ed.WriteMessage("\n Start adding point group for " + CurrentSurface.Name);
AddPointsGroup();
//ed.WriteMessage("\n Start adding out boundary for " + CurrentSurface.Name);
AddBreakLines("Out_Boundary");
//ed.WriteMessage("\n Start adding internal boundary for " + CurrentSurface.Name);
AddBreakLines("Internal_Boundary");
CurrentSurface.Rebuild();
ed.WriteMessage("\n Start rebuilding for " + CurrentSurface.Name);
void AddBreakLines(string TypeOfLines)
{
ObjectIdCollection GroupOfBreaklines = new ObjectIdCollection();
foreach (ObjectId OneFlineItem in OneSite.GetFeatureLineIds())
{
FeatureLine OneFline = ts.GetObject(OneFlineItem, OpenMode.ForRead) as FeatureLine;
string OneFline_Name = OneFline.Name;
if (OneFline_Name.Contains("outer_") && TypeOfLines == "Out_Boundary")
{
ed.WriteMessage("\n Start adding outer boundary for " + OneFline_Name);
CurrentSurface.BoundariesDefinition.AddBoundaries(OneFline.GetPoints(Autodesk.Civil.FeatureLinePointType.AllPoints), midOrdinate, Autodesk.Civil.SurfaceBoundaryType.Outer, true);
}
else if (OneFline_Name.Contains("void_") && TypeOfLines == "Internal_Boundary")
{
ed.WriteMessage("\n Start adding internal boundary for " + OneFline_Name);
CurrentSurface.BoundariesDefinition.AddBoundaries(OneFline.GetPoints(Autodesk.Civil.FeatureLinePointType.AllPoints), midOrdinate, Autodesk.Civil.SurfaceBoundaryType.Hide, true);
}
else
{
GroupOfBreaklines.Add(OneFlineItem);
}
}
if (TypeOfLines == null)
{
ed.WriteMessage("\n Start adding standard breaklines");
CurrentSurface.BreaklinesDefinition.AddStandardBreaklines(GroupOfBreaklines, midOrdinate, maxDist, weedingDist, weedingAngle);
}
}
void AddPointsGroup()
{
CogoPointCollection CG_AllPoints = CivilApp.CogoPoints;
foreach (ObjectId OneCogoItem in CG_AllPoints)
{
CogoPoint COGO_Single = ts.GetObject(OneCogoItem, OpenMode.ForRead) as CogoPoint;
ObjectId CG_GroupId = COGO_Single.PrimaryPointGroupId;
PointGroup CG_Group = ts.GetObject(CG_GroupId, OpenMode.ForRead) as PointGroup;
if (CG_Group.Name == Site_Name)
{
ed.WriteMessage("\n COGO points group for surface's name was find - it's name = " + CG_Group.Name);
CurrentSurface.PointGroupsDefinition.AddPointGroup(CG_GroupId);
break;
}
}
}
break;
}
}
}
}
catch (System.Exception e)
{
ed.WriteMessage(e.Message);
}
ts.Commit();
}
}
public static void Detach()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
var ed = doc.Editor;
var civil = CivilApplication.ActiveDocument;
var surfIds = civil.GetSurfaceIds();
var selRes = ed.SelectImplied();
if (selRes.Status != PromptStatus.OK)
{
return;
}
List <ObjectId> idsFlToDetach = selRes.Value.GetObjectIds().ToList();
List <ObjectId> idsFlDetached = new List <ObjectId>();
List <ObjectId> idsEditedSurf = new List <ObjectId>();
using (var t = doc.TransactionManager.StartTransaction())
{
bool isEditedSurf = false;
foreach (ObjectId surfId in surfIds)
{
var surf = surfId.GetObject(OpenMode.ForRead) as TinSurface;
IAeccTinSurface surfCom = (IAeccTinSurface)surf.AcadObject;
for (int i = 0; i < surfCom.Breaklines.Count; i++)
{
var brLine = surfCom.Breaklines.Item(i);
var brLineEnts = (object[])brLine.BreaklineEntities;
List <ObjectId> idBreaklinesToAdd = new List <ObjectId>();
bool isFind = false;
for (int b = 0; b < brLineEnts.Length; b++)
{
var brLineId = Autodesk.AutoCAD.DatabaseServices.DBObject.FromAcadObject(brLineEnts[b]);
idBreaklinesToAdd.Add(brLineId);
if (idsFlToDetach.Contains(brLineId))
{
//surf.BreaklinesDefinition.RemoveAt(i); // не всегда срабатывает!?
surfCom.Breaklines.Remove(i);
idBreaklinesToAdd.Remove(brLineId);
isFind = true;
idsFlDetached.Add(brLineId);
}
}
if (isFind)
{
isEditedSurf = true;
if (idBreaklinesToAdd.Any())
{
AddBreaklinesToSurface(surf, idBreaklinesToAdd);
}
}
}
if (isEditedSurf)
{
isEditedSurf = false;
idsEditedSurf.Add(surfId);
}
}
// Изменение стиля характерной линии
StyleHelper.Change(idsFlDetached, "Удаленные из поверхности");
t.Commit();
}
// Перестройка поверхностей
using (var t = doc.TransactionManager.StartTransaction())
{
foreach (var idSurf in idsEditedSurf)
{
TinSurface surface = idSurf.GetObject(OpenMode.ForWrite) as TinSurface;
surface.Rebuild();
}
t.Commit();
}
}
public static ObjectId CroppingSurface5(TinSurface surface, Polyline border)
{
Document activeDoc = Tools.GetActiveAcadDocument();
Database sourceDb = activeDoc.Database;
var points = border.GetPoints();
string surfaceName = "Cropped_" + surface.Name + "<[Next Counter(CP)]>";
using (Database destDb = new Database(true, false))
{
HostApplicationServices.WorkingDatabase = destDb;
ObjectId newSurfaceId = TinSurface.CreateByCropping(destDb, surfaceName, surface.Id, points);
HostApplicationServices.WorkingDatabase = sourceDb;
using (Transaction transDest = Tools.StartTransaction(destDb))
{
TinSurface newSurface = transDest.GetObject(newSurfaceId, OpenMode.ForRead) as TinSurface;
/*newSurface = newSurface.Clone() as TinSurface;
*
* newSurface.SetDatabaseDefaults(sourceDb);
* Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument = activeDoc;
* Tools.AppendEntity(sourceDb, newSurface);*/
//newSurface = newSurface.Clone() as TinSurface;
transDest.Commit();
newSurface = newSurface.Clone() as TinSurface;
newSurface.SetDatabaseDefaults(sourceDb);
newSurface.SetToStandard(sourceDb);
newSurface.StyleId = surface.StyleId;
IntPtr ptr = newSurface.UnmanagedObject;
var obj = TinSurface.Create(ptr, false);
using (Transaction srcTrans = Tools.StartTransaction(sourceDb))
{
newSurfaceId = TinSurface.Create(sourceDb, "test_surface");
newSurface.SetDatabaseDefaults(sourceDb);
newSurface.SetToStandard(sourceDb);
newSurface.SetDefaultLayer();
newSurface.StyleId = surface.StyleId;
//newSurface = srcTrans.GetObject(TinSurface.Create(sourceDb, "test_surface"), OpenMode.ForWrite) as TinSurface;
//newSurface.CopyFrom(obj);
newSurface.Rebuild();
srcTrans.Commit();
}
using (Transaction srcTrans = Tools.StartTransaction(sourceDb))
{
newSurface = srcTrans.GetObject(newSurfaceId, OpenMode.ForWrite) as TinSurface;
newSurface.UpgradeOpen();
newSurface.CopyFrom(obj);
//newSurface.Name = "test_surface2";
newSurface.SetDatabaseDefaults(sourceDb);
newSurface.SetToStandard(sourceDb);
newSurface.SetDefaultLayer();
newSurface.StyleId = surface.StyleId;
newSurface.Rebuild();
srcTrans.Commit();
}
using (Transaction srcTrans = Tools.StartTransaction(sourceDb))
{
newSurface = srcTrans.GetObject(newSurfaceId, OpenMode.ForWrite) as TinSurface;
newSurface.UpgradeOpen();
newSurface.SetDatabaseDefaults(sourceDb);
newSurface.SetToStandard(sourceDb);
newSurface.SetDefaultLayer();
srcTrans.Commit();
newSurface.Rebuild();
//newSurface.RebuildSnapshot();
newSurface.CreateSnapshot();
}
//Tools.AppendEntity(sourceDb, obj as TinSurface);
}
}
return(ObjectId.Null);
}
TP2()
{
Point3d pnt3d1 = UserInput.getPoint("\nPick Corner 1: ", Pub.pnt3dO, out escaped, out ps, osMode: 0);
if (pnt3d1 == Pub.pnt3dO)
{
return;
}
Point3d pnt3d2 = UserInput.getPoint("\nPick Baseline direction: ", pnt3d1, out escaped, out ps, osMode: 0);
if (pnt3d1 == Pub.pnt3dO)
{
return;
}
Vector2d v2dX = pnt3d2.Convert2d(BaseObjs.xyPlane) - pnt3d1.Convert2d(BaseObjs.xyPlane);
Vector2d v2dY = v2dX.RotateBy(System.Math.PI / 2);
Vector3d v3dY = new Vector3d(v2dY.X, v2dY.Y, 0);
Point3d pnt3dY = pnt3d1 + v3dY;
Matrix3d m3d = UCsys.addUCS(pnt3d1, pnt3d2, "temp");
Point3d pnt3d0 = Db.wcsToUcs(pnt3d1);
Polyline poly = jigPolylineArea(pnt3d0);
UCsys.setUCS2World();
poly.ObjectId.transformToWcs(BaseObjs._db);
escaped = UserInput.getUserInputDoubleAsString("\nEnter Elevation: ", out elev, elev);
if (escaped)
{
return;
}
escaped = UserInput.getUserInputDoubleAsString("\nEnter Slope: ", out slope, slope);
if (escaped)
{
return;
}
double dblSlope = double.Parse(slope);
Point3d pnt3dCEN = poly.getCentroid();
Point3d pnt3dTAR = UserInput.getPoint("\nPick edge of polygon in the Direction of Increasing Slope: ", pnt3dCEN, out escaped, out ps, osMode: 641);
if (pnt3dTAR == Pub.pnt3dO)
{
return;
}
ObjectIdCollection idspoly3d = new ObjectIdCollection();
double dblDist = 0.0;
ObjectId idPoly3d = ObjectId.Null;
pnt3dCEN = pnt3dCEN.addElevation(double.Parse(elev));
if (pnt3dTAR != Pub.pnt3dO)
{
dblDist = pnt3dCEN.getDistance(pnt3dTAR);
}
string nameLayer = string.Format("{0}-BORDER", "BASIN");
Layer.manageLayers(nameLayer);
int numObj = 0;
bool exists = false;
ObjectId idDict = Dict.getNamedDictionary(apps.lnkBrks, out exists);
if (exists)
{
numObj = idDict.getDictEntries().Count;
}
string nameSurf = string.Format("{0}{1}", "BASIN", numObj.ToString("00"));
ObjectId idDictObj = Dict.addSubDict(idDict, nameSurf);
using (BaseObjs._acadDoc.LockDocument())
{
if (pnt3dTAR != Pub.pnt3dO)
{
pnt3dTAR = new Point3d(pnt3dTAR.X, pnt3dTAR.Y, pnt3dCEN.Z + dblDist * dblSlope);
idPoly3d = Base_Tools45.C3D.DrawBasinBot.build3dPolyBasinBot(poly.ObjectId, pnt3dCEN, pnt3dTAR, dblSlope, nameLayer, apps.lnkBrks);
}
else
{
idPoly3d = Conv.poly_Poly3d(poly.ObjectId, double.Parse(elev), nameLayer);
}
idspoly3d.Add(idPoly3d);
TinSurface surf = Surf.addTinSurface(nameSurf, out exists);
if (exists)
{
Application.ShowAlertDialog(string.Format("Surface Name conflict - surface \"{0}\" already exists. Exiting...", nameSurf));
return;
}
surf.BreaklinesDefinition.AddStandardBreaklines(idspoly3d, 1.0, 0.0, 0.0, 0.0);
surf.Rebuild();
}
using (BaseObjs._acadDoc.LockDocument())
{
BaseObjs.regen();
}
}
