public SliceLayerSelector(PrinterConfig printer, BedConfig sceneContext, ThemeConfig theme)
{
this.sceneContext = sceneContext;
this.AddChild(layerScrollbar = new LayerScrollbar(printer, sceneContext, theme)
{
VAnchor = VAnchor.Stretch,
HAnchor = HAnchor.Right
});
layerSlider = layerScrollbar.layerSlider;
theme.ApplySliderStyle(layerSlider);
var tagContainer = new HorizontalTag()
{
HAnchor = HAnchor.Fit | HAnchor.Right,
VAnchor = VAnchor.Fit,
Padding = new BorderDouble(6, 4, 10, 4),
Margin = new BorderDouble(right: layerScrollbar.Width + layerScrollbar.Margin.Width),
TagColor = (theme.IsDarkTheme) ? theme.Shade : theme.SlightShade
};
currentLayerInfo = new InlineEditControl("1000")
{
Name = "currentLayerInfo",
TextColor = theme.TextColor,
GetDisplayString = (value) => $"{value}",
HAnchor = HAnchor.Right | HAnchor.Fit,
VAnchor = VAnchor.Absolute | VAnchor.Fit,
};
currentLayerInfo.EditComplete += (s, e) =>
{
layerScrollbar.Value = currentLayerInfo.Value - 1;
};
tagContainer.AddChild(currentLayerInfo);
this.AddChild(tagContainer);
currentLayerInfo.Visible = true;
layerInfoHalfHeight = currentLayerInfo.Height / 2;
currentLayerInfo.Visible = false;
layerSlider.ValueChanged += (s, e) =>
{
currentLayerInfo.StopEditing();
currentLayerInfo.Position = new Vector2(0, (double)(layerSlider.Position.Y + layerSlider.PositionPixelsFromFirstValue - layerInfoHalfHeight));
};
// Set initial position
currentLayerInfo.Position = new Vector2(0, (double)(layerSlider.Position.Y + layerSlider.PositionPixelsFromFirstValue - layerInfoHalfHeight));
sceneContext.ActiveLayerChanged += SetPositionAndValue;
layerScrollbar.MouseEnter += SetPositionAndValue;
}
private AdjustmentControls(PrinterConfig printer, ThemeConfig theme)
: base(FlowDirection.TopToBottom)
{
double sliderWidth = 300 * GuiWidget.DeviceScale;
double sliderThumbWidth = 10 * GuiWidget.DeviceScale;
this.printer = printer;
SettingsRow settingsRow;
{
this.AddChild(settingsRow = new SettingsRow(
"Speed Multiplier".Localize(),
null,
theme));
// Remove the HorizontalSpacer
settingsRow.Children.Last().Close();
feedRateRatioSlider = new SolidSlider(new Vector2(), sliderThumbWidth, theme, minFeedRateRatio, maxFeedRateRatio)
{
Name = "Feed Rate Slider",
Margin = new BorderDouble(5, 0),
Value = FeedRateMultiplyerStream.FeedRateRatio,
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Center,
TotalWidthInPixels = sliderWidth,
};
theme.ApplySliderStyle(feedRateRatioSlider);
feedRateRatioSlider.ValueChanged += (sender, e) =>
{
feedRateValue.ActuallNumberEdit.Value = Math.Round(feedRateRatioSlider.Value, 2);
};
feedRateRatioSlider.SliderReleased += (s, e) =>
{
// Update state for runtime use
FeedRateMultiplyerStream.FeedRateRatio = Math.Round(feedRateRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.feedrate_ratio,
FeedRateMultiplyerStream.FeedRateRatio.ToString());
};
settingsRow.AddChild(feedRateRatioSlider);
feedRateValue = new MHNumberEdit(Math.Round(FeedRateMultiplyerStream.FeedRateRatio, 2), theme, allowDecimals: true, minValue: minFeedRateRatio, maxValue: maxFeedRateRatio, pixelWidth: 40 * GuiWidget.DeviceScale)
{
Name = "Feed Rate NumberEdit",
SelectAllOnFocus = true,
Margin = new BorderDouble(0, 0, 5, 0),
VAnchor = VAnchor.Center | VAnchor.Fit,
Padding = 0
};
feedRateValue.ActuallNumberEdit.EditComplete += (sender, e) =>
{
feedRateRatioSlider.Value = feedRateValue.ActuallNumberEdit.Value;
// Update state for runtime use
FeedRateMultiplyerStream.FeedRateRatio = Math.Round(feedRateRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.feedrate_ratio,
FeedRateMultiplyerStream.FeedRateRatio.ToString());
};
settingsRow.AddChild(feedRateValue);
}
{
this.AddChild(settingsRow = new SettingsRow(
"Extrusion Multiplier".Localize(),
null,
theme));
// Remove the HorizontalSpacer
settingsRow.Children.Last().Close();
extrusionRatioSlider = new SolidSlider(new Vector2(), sliderThumbWidth, theme, minExtrutionRatio, maxExtrusionRatio, Orientation.Horizontal)
{
Name = "Extrusion Multiplier Slider",
TotalWidthInPixels = sliderWidth,
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Center,
Margin = new BorderDouble(5, 0),
Value = ExtrusionMultiplyerStream.ExtrusionRatio
};
theme.ApplySliderStyle(extrusionRatioSlider);
extrusionRatioSlider.ValueChanged += (sender, e) =>
{
extrusionValue.ActuallNumberEdit.Value = Math.Round(extrusionRatioSlider.Value, 2);
};
extrusionRatioSlider.SliderReleased += (s, e) =>
{
// Update state for runtime use
ExtrusionMultiplyerStream.ExtrusionRatio = Math.Round(extrusionRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.extrusion_ratio,
ExtrusionMultiplyerStream.ExtrusionRatio.ToString());
};
settingsRow.AddChild(extrusionRatioSlider);
extrusionValue = new MHNumberEdit(Math.Round(ExtrusionMultiplyerStream.ExtrusionRatio, 2), theme, allowDecimals: true, minValue: minExtrutionRatio, maxValue: maxExtrusionRatio, pixelWidth: 40 * GuiWidget.DeviceScale)
{
Name = "Extrusion Multiplier NumberEdit",
SelectAllOnFocus = true,
Margin = new BorderDouble(0, 0, 5, 0),
VAnchor = VAnchor.Center | VAnchor.Fit,
Padding = 0
};
extrusionValue.ActuallNumberEdit.EditComplete += (sender, e) =>
{
extrusionRatioSlider.Value = extrusionValue.ActuallNumberEdit.Value;
// Update state for runtime use
ExtrusionMultiplyerStream.ExtrusionRatio = Math.Round(extrusionRatioSlider.Value, 2);
// Persist data for future use
printer.Settings.SetValue(
SettingsKey.extrusion_ratio,
ExtrusionMultiplyerStream.ExtrusionRatio.ToString());
};
settingsRow.AddChild(extrusionValue);
}
// Register listeners
printer.Settings.SettingChanged += Printer_SettingChanged;
}
public PrinterTabPage(PartWorkspace workspace, ThemeConfig theme, string tabTitle)
: base(workspace, theme, tabTitle)
{
gcodeOptions = sceneContext.RendererOptions;
view3DWidget.InteractionLayer.EditorMode = InteractionLayer.EditorType.Printer;
viewControls3D.TransformStateChanged += (s, e) =>
{
switch (e.TransformMode)
{
case ViewControls3DButtons.Translate:
if (gcode2DWidget != null)
{
gcode2DWidget.TransformState = GCode2DWidget.ETransformState.Move;
}
break;
case ViewControls3DButtons.Scale:
if (gcode2DWidget != null)
{
gcode2DWidget.TransformState = GCode2DWidget.ETransformState.Scale;
}
break;
}
};
viewControls3D.ResetView += (sender, e) =>
{
if (gcode2DWidget?.Visible == true)
{
gcode2DWidget.CenterPartInView();
}
};
var opaqueTrackColor = theme.ResolveColor(theme.BedBackgroundColor, theme.SlightShade);
LayerScrollbar = new SliceLayerSelector(printer, theme)
{
VAnchor = VAnchor.Stretch,
HAnchor = HAnchor.Right | HAnchor.Fit,
Margin = new BorderDouble(0, 4, 4, 4),
Maximum = sceneContext.LoadedGCode?.LayerCount ?? 1
};
LayerScrollbar.SolidSlider.View.TrackColor = opaqueTrackColor;
view3DWidget.InteractionLayer.AddChild(LayerScrollbar);
layerRenderRatioSlider = new DoubleSolidSlider(new Vector2(), SliceLayerSelector.SliderWidth, theme);
layerRenderRatioSlider.FirstValue = 0;
layerRenderRatioSlider.FirstValueChanged += (s, e) =>
{
sceneContext.RenderInfo.FeatureToStartOnRatio0To1 = layerRenderRatioSlider.FirstValue;
sceneContext.RenderInfo.FeatureToEndOnRatio0To1 = layerRenderRatioSlider.SecondValue;
this.Invalidate();
};
layerRenderRatioSlider.SecondValue = 1;
layerRenderRatioSlider.SecondValueChanged += (s, e) =>
{
if (printer?.Bed?.RenderInfo != null)
{
sceneContext.RenderInfo.FeatureToStartOnRatio0To1 = layerRenderRatioSlider.FirstValue;
sceneContext.RenderInfo.FeatureToEndOnRatio0To1 = layerRenderRatioSlider.SecondValue;
}
this.Invalidate();
};
view3DWidget.InteractionLayer.AddChild(layerRenderRatioSlider);
theme.ApplySliderStyle(layerRenderRatioSlider);
layerRenderRatioSlider.View.TrackColor = opaqueTrackColor;
AddSettingsTabBar(leftToRight, view3DWidget);
view3DWidget.InteractionLayer.BoundsChanged += (s, e) =>
{
SetSliderSizes();
};
printerActionsBar = new PrinterActionsBar(printer, this, theme);
theme.ApplyBottomBorder(printerActionsBar);
printerActionsBar.modelViewButton.Enabled = sceneContext.EditableScene;
// Must come after we have an instance of View3DWidget an its undo buffer
topToBottom.AddChild(printerActionsBar, 0);
var trackball = view3DWidget.InteractionLayer.Children <TrackballTumbleWidget>().FirstOrDefault();
tumbleCubeControl = view3DWidget.InteractionLayer.Children <TumbleCubeControl>().FirstOrDefault();
var position = view3DWidget.InteractionLayer.Children.IndexOf(trackball);
gcodePanel = new GCodePanel(this, printer, sceneContext, theme)
{
Name = "GCode3DWidget",
HAnchor = HAnchor.Stretch,
VAnchor = VAnchor.Stretch,
BackgroundColor = theme.InteractionLayerOverlayColor,
};
var modelViewSidePanel = view3DWidget.Descendants <VerticalResizeContainer>().FirstOrDefault();
gcodeContainer = new VerticalResizeContainer(theme, GrabBarSide.Left)
{
Width = printer?.ViewState.SelectedObjectPanelWidth ?? 200,
VAnchor = VAnchor.Stretch,
HAnchor = HAnchor.Absolute,
SplitterBarColor = theme.SplitterBackground,
SplitterWidth = theme.SplitterWidth,
Visible = false,
};
gcodeContainer.AddChild(gcodePanel);
gcodeContainer.Resized += (s, e) =>
{
if (printer != null)
{
printer.ViewState.SelectedObjectPanelWidth = gcodeContainer.Width;
}
};
modelViewSidePanel.BoundsChanged += (s, e) =>
{
gcodeContainer.Width = modelViewSidePanel.Width;
};
gcodeContainer.BoundsChanged += (s, e) =>
{
modelViewSidePanel.Width = gcodeContainer.Width;
};
var splitContainer = view3DWidget.FindDescendant("SplitContainer");
splitContainer.AddChild(gcodeContainer);
view3DContainer.AddChild(new RunningTasksWidget(theme, printer)
{
MinimumSize = new Vector2(100, 0),
Margin = new BorderDouble(top: printerActionsBar.Height + 1, left: favoritesBar.LocalBounds.Width + favoritesBar.DeviceMarginAndBorder.Width + 1),
VAnchor = VAnchor.Top | VAnchor.Fit,
HAnchor = HAnchor.Left | HAnchor.Fit,
});
// Create and append new widget
gcode2DWidget = new GCode2DWidget(printer, theme)
{
Visible = (printer.ViewState.ViewMode == PartViewMode.Layers2D)
};
view3DWidget.InteractionLayer.AddChild(gcode2DWidget, position + 1);
SetSliderSizes();
this.SetViewMode(printer.ViewState.ViewMode);
this.LayerScrollbar.Margin = LayerScrollbar.Margin.Clone(top: tumbleCubeControl.Height + tumbleCubeControl.Margin.Height + 4);
// On load, switch to gcode view if previously editing gcode file. Listeners would normally do this but workspace loads before this UI widget
if (this?.printerActionsBar?.modelViewButton is GuiWidget button)
{
button.Enabled = sceneContext.EditableScene;
if (sceneContext.ContentType == "gcode" &&
this?.printerActionsBar?.layers3DButton is GuiWidget gcodeButton)
{
gcodeButton.InvokeClick();
}
}
// Register listeners
printer.ViewState.VisibilityChanged += ProcessOptionalTabs;
printer.ViewState.ViewModeChanged += ViewState_ViewModeChanged;
printer.Bed.RendererOptions.PropertyChanged += RendererOptions_PropertyChanged;
// register for communication messages
printer.Connection.CommunicationStateChanged += Connection_CommunicationStateChanged;
printer.Connection.PauseOnLayer += Connection_PauseOnLayer;
printer.Connection.FilamentRunout += Connection_FilamentRunout;
ApplicationController.Instance.ApplicationError += ApplicationController_ApplicationError;
ApplicationController.Instance.ApplicationEvent += ApplicationController_ApplicationEvent;
sceneContext.LoadedGCodeChanged += BedPlate_LoadedGCodeChanged;
}