예제 #1
0
        public override InaccuracyResult ExecuteCommand()
        {
            Result = new InaccuracyResult();
            StendDLLCommands stend = new StendDLLCommands();

            try
            {
                stend.SetRefClockStend(0, StendSettings.ComPort);
            }
            catch { }

            try
            {
                stend.ErrorClear(StendSettings.ComPort);

                if (StendSettings.OnePhaseTwoCircuits)
                {
                    switch (IABC)
                    {
                    case "A": {
                        stend.SelectCurrentCircuit(0, StendSettings.ComPort);
                    } break;

                    case "B": {
                        stend.SelectCurrentCircuit(1, StendSettings.ComPort);
                    } break;

                    case "H": {
                        stend.SelectCurrentCircuit(2, StendSettings.ComPort);
                    } break;
                    }
                }

                stend.SetReviseMode(3);

                stend.AdjustUI(Phase, Rated_Volt, Rated_Curr, Rated_Freq, PhaseSrequence, IsRevers, Volt_Per, Curr_Per, IABC, CosP, StendSettings.SModel, StendSettings.ComPort);

                for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                {
                    stend.setPulseChannel(StendSettings.ActivePlaces[j], (byte)(2 * (IsActiveEnergy == 1 ? 0 : 1) + IsRevers), StendSettings.ComPort);
                }

                if (IsActiveEnergy == 1)
                {
                    StendSettings.Constant = StendSettings.ConstantAP;
                }
                else
                {
                    StendSettings.Constant = StendSettings.ConstantRP;
                }

                for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                {
                    stend.errorStart(StendSettings.ActivePlaces[j], StendSettings.Constant, Impulse, StendSettings.ComPort);
                    Result[StendSettings.ActivePlaces[j]] = "";
                }

                Thread.Sleep(3000);

                while (!Cancel)
                {
                    //Считываю погрешность со всех активных мест по очереди
                    for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                    {
                        //Номер посадочного места
                        byte plaseNo = StendSettings.ActivePlaces.ElementAt(j);

                        //Погрешность счётчика на посадочном месте
                        string errorResultPlase = stend.ErrorRead(plaseNo, StendSettings.ComPort);

                        if (errorResultPlase[0] != '0')
                        {
                            if (!Result[plaseNo].Contains(errorResultPlase.Substring(2)))
                            {
                                Result[plaseNo] += errorResultPlase.Substring(2) + '\n';
                            }
                        }
                        Thread.Sleep(50);
                    }

                    bool exit = true;
                    int  resx = 0;

                    //Получать погрешность с счётчиков до тех пор пока все не передадут Amount измерений
                    for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                    {
                        int res = Result[StendSettings.ActivePlaces[j]].Count(x => x == '\n');
                        resx += res > Amount ? (int)Amount : res;
                        exit &= res >= Amount;
                    }

                    Progress = ProgressMaxValue * resx / (StendSettings.ActivePlaces.Count * Amount);
                    if (exit)
                    {
                        break;
                    }
                }
                Progress = ProgressMaxValue;
            }
            catch
            {
                Progress = ProgressMinValue;
                throw;
            }
            finally
            {
                stend.ErrorClear(StendSettings.ComPort);
                stend.PowerOff(StendSettings.ComPort);
            }
            return(Result);
        }
        public override CounterResult ExecuteCommand()
        {
            Result = new CounterResult();
            StendDLLCommands stend = new StendDLLCommands();

            try
            {
                stend.SetRefClockStend(0, StendSettings.ComPort);
                //Если стенд не оборудован блоком точности хода часов
            } catch (StendConnectionException) { }

            try {
                stend.ErrorClear(StendSettings.ComPort);

                //Если стенд однофазный и у него две токовые цепи, то выбираю первую цепь (A)
                if (StendSettings.OnePhaseTwoCircuits)
                {
                    stend.SelectCurrentCircuit(0, StendSettings.ComPort);
                }

                stend.SetReviseMode(3);

                //Подаю напряжение на счетчики
                stend.AdjustUI(Phase, Rated_Volt, 0, Rated_Freq, PhaseSrequence, IsRevers,
                               Volt_Per, Curr_Per, IABC, CosP, StendSettings.SModel, StendSettings.ComPort);

                //Даю время запуститься счетчикам
                Thread.Sleep(5000);

                if (IsActiveEnergy == 1)
                {
                    StendSettings.Constant = StendSettings.ConstantAP;
                }
                else
                {
                    StendSettings.Constant = StendSettings.ConstantRP;
                }

                //Запускаю тест
                for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                {
                    stend.setPulseChannel(StendSettings.ActivePlaces[j], (byte)(2 * (IsActiveEnergy == 1 ? 0 : 1) + IsRevers), StendSettings.ComPort);
                    stend.ConstTestStart(StendSettings.ActivePlaces[j], StendSettings.Constant, StendSettings.ComPort);
                }

                //Подаю ток, который выставлен для испытания
                stend.AdjustUI(Phase, Rated_Volt, Rated_Curr, Rated_Freq, PhaseSrequence, IsRevers,
                               Volt_Per, Curr_Per, IABC, CosP, StendSettings.SModel, StendSettings.ComPort);

                bool[] result = new bool[StendSettings.ActivePlaces.Count];

                while (!Cancel)
                {
                    double count = 0;
                    for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                    {
                        if (result[j])
                        {
                            continue;
                        }

                        stend.ConstPulseRead(out double meter_kW, out double std_kW, StendSettings.Constant, StendSettings.ActivePlaces[j], StendSettings.ComPort);

                        //Amount тут используется как количество энергии, которое должно поступить для окончания испытаний
                        count    += std_kW > Amount ? Amount : std_kW;
                        result[j] = std_kW >= Amount;

                        //Высчитываю процент погрешности между энергией, которую накрутил счётчик и которую посчитал эталонный счетчик установки
                        if (result[j])
                        {
                            Result[StendSettings.ActivePlaces[j]] = string.Format("{0:f5}", (100 * (1.0 - (meter_kW / std_kW)))) + "%";
                        }
                    }

                    Progress = ProgressMaxValue * count / (Amount * StendSettings.ActivePlaces.Count);

                    //Дожидаюсь пока получу готовность подсчета всех счетчиков
                    bool exit = true;
                    for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                    {
                        exit &= result[j];
                    }
                    if (exit)
                    {
                        break;
                    }

                    Thread.Sleep(400);
                }

                Progress = ProgressMaxValue;
            }
            catch
            {
                Progress = ProgressMinValue;
                throw;
            }
            finally
            {
                stend.ErrorClear(StendSettings.ComPort);
                stend.PowerOff(StendSettings.ComPort);
            }

            return(Result);
        }
예제 #3
0
        public override SamohodResult ExecuteCommand()
        {
            Result = new SamohodResult();
            StendDLLCommands stend = new StendDLLCommands();

            try {
                stend.SetRefClockStend(0, StendSettings.ComPort);
            } catch { }

            try {
                stend.ErrorClear(StendSettings.ComPort);
                if (Amount < 1)
                {
                    return(Result);
                }

                if (StendSettings.OnePhaseTwoCircuits)
                {
                    stend.SelectCurrentCircuit(0, StendSettings.ComPort);
                }

                //Возможно она тут не обязательна
                stend.SetReviseMode(3);

                stend.AdjustUI(Phase, Rated_Volt, Rated_Curr, Rated_Freq, PhaseSrequence, IsRevers, Volt_Per, Curr_Per, IABC, CosP, StendSettings.SModel, StendSettings.ComPort);

                for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                {
                    stend.setPulseChannel(StendSettings.ActivePlaces[j], (byte)(2 * (IsActiveEnergy == 1 ? 0 : 1) + IsRevers), StendSettings.ComPort);
                }

                for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                {
                    if (Amount == 1)
                    {
                        stend.searchMark(StendSettings.ActivePlaces.ElementAt(j), StendSettings.ComPort);
                    }
                    else
                    {
                        stend.CountStart(StendSettings.ActivePlaces.ElementAt(j), StendSettings.ComPort);
                    }
                }

                Stopwatch sw = new Stopwatch();
                sw.Start();

                while (sw.ElapsedMilliseconds < Timeout * 1000 && !Cancel)
                {
                    for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                    {
                        byte idx = StendSettings.ActivePlaces.ElementAt(j);

                        if (Amount == 1)
                        {
                            Result[idx] = (!stend.searchMarkResult(idx, StendSettings.ComPort)).ToString();
                        }
                        else
                        {
                            stend.CountRead(out int result, idx, StendSettings.ComPort);
                            Result[idx] = (result + 1 < Amount).ToString();
                        }
                    }

                    bool _stop = true;
                    foreach (KeyValuePair <int, string> x in Result)
                    {
                        _stop &= !bool.Parse(x.Value);
                    }
                    if (_stop)
                    {
                        break;
                    }

                    Progress = ProgressMaxValue * sw.ElapsedMilliseconds / (Timeout * 1000);

                    Thread.Sleep(400);
                }
                sw.Stop();
                Progress = ProgressMaxValue;
            } catch {
                Progress = ProgressMinValue;
                throw;
            } finally {
                stend.ErrorClear(StendSettings.ComPort);
                stend.PowerOff(StendSettings.ComPort);
            }

            return(Result);
        }
예제 #4
0
        public override ClockResult ExecuteCommand()
        {
            Result = new ClockResult();
            StendDLLCommands stend = new StendDLLCommands();

            try
            {
                stend.ErrorClear(StendSettings.ComPort);

                stend.AdjustUI(Phase, Rated_Volt, Rated_Curr, Rated_Freq, PhaseSrequence, IsRevers, Volt_Per, Curr_Per, IABC, CosP, StendSettings.SModel, StendSettings.ComPort);

                for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                {
                    //По идее эта команда тут не обязательна, но на всякий случай
                    stend.setPulseChannel(StendSettings.ActivePlaces[j], (byte)(2 * (IsActiveEnergy == 1 ? 0 : 1) + IsRevers), StendSettings.ComPort);
                    Result[StendSettings.ActivePlaces[j]] = "";
                }

                stend.SetRefClockStend(1, StendSettings.ComPort);

                for (int k = 0; k < Amount; k++)
                {
                    for (int j = 0; j < StendSettings.ActivePlaces.Count; j++)
                    {
                        stend.ClockErrorStart(StendSettings.ActivePlaces[j], Frequency, Impulse, StendSettings.ComPort);
                    }

                    Stopwatch sw = new Stopwatch();

                    //Время одного измерения
                    double timeMeasurement = (Frequency * Impulse + Frequency) * 1000;

                    sw.Start();

                    //Для приращения прогресс бара и ожидания когда, компаратор получит все импульсы от счётчика для подсчета
                    while (sw.ElapsedMilliseconds < (int)timeMeasurement && !Cancel)
                    {
                        Progress = ProgressMaxValue * (sw.ElapsedMilliseconds + timeMeasurement * k) / (int)(timeMeasurement * Amount);
                        Thread.Sleep(100);
                    }

                    //Получение результатов с компаратора
                    for (int j = 0; j < StendSettings.ActivePlaces.Count && !Cancel; j++)
                    {
                        string result = "";
                        stend.ClockErrorRead(ref result, Frequency, 0, StendSettings.ActivePlaces[j], StendSettings.ComPort);
                        result = string.Format("{0:f7}", (double.Parse(result) - Frequency));
                        Result[StendSettings.ActivePlaces[j]] += result + '\n';
                    }
                }

                Progress = ProgressMaxValue;
            }
            catch
            {
                Progress = ProgressMinValue;
                throw;
            }
            finally
            {
                try {
                    stend.ErrorClear(StendSettings.ComPort);
                    stend.PowerOff(StendSettings.ComPort);
                    //Если ошибка связана с COM портом, то просто игнорю т.к. первая ошибка на это укажет
                }catch (StendConnectionException) {}
            }

            return(Result);
        }