internal static Snap.NX.TrimBody CreateTrimBody(Snap.NX.Body targetBody, Snap.NX.DatumPlane toolDatumPlane, bool direction)
{
NXOpen.Part workPart = (NXOpen.Part)Globals.WorkPart;
TrimBodyBuilder featureBuilder = workPart.Features.CreateTrimBodyBuilder(null);
//featureBuilder.Tolerance = Globals.DistanceTolerance;
//featureBuilder.BooleanTool.ExtrudeRevolveTool.ToolSection.DistanceTolerance = Globals.DistanceTolerance;
//featureBuilder.BooleanTool.ExtrudeRevolveTool.ToolSection.ChainingTolerance = (Globals.UnitType == Globals.Unit.Millimeter) ? 0.02413 : 0.00095;
//ScCollector collector = workPart.ScCollectors.CreateCollector();
//NXOpen.Body[] bodies = new NXOpen.Body[] { targetBody };
//BodyDumbRule rule = workPart.ScRuleFactory.CreateRuleBodyDumb(bodies);
//SelectionIntentRule[] rules = new SelectionIntentRule[] { rule };
//collector.ReplaceRules(rules, false);
//featureBuilder.TargetBodyCollector = collector;
featureBuilder.SetTargets(new NXOpen.Body[] { targetBody });
featureBuilder.Tool = toolDatumPlane.NXOpenDisplayableObject;
featureBuilder.TrimDirection = direction ? TrimBodyBuilder.DirectionType.PositiveNormal : TrimBodyBuilder.DirectionType.NegativeNormal;
//SelectionIntentRule[] ruleArray2 = new SelectionIntentRule[1];
//NXOpen.DatumPlane[] faces = new NXOpen.DatumPlane[] { toolDatumPlane.NXOpenDatumPlaneFeature.DatumPlane };
//ruleArray2[0] = workPart.ScRuleFactory.CreateRuleFaceDatum(faces);
//featureBuilder.BooleanTool.FacePlaneTool.ToolFaces.FaceCollector.ReplaceRules(ruleArray2, false);
//featureBuilder.BooleanTool.ReverseDirection = direction;
NXOpen.Features.TrimBody trim = (NXOpen.Features.TrimBody)Snap.NX.Feature.CommitFeature(featureBuilder);
featureBuilder.Destroy();
return(new Snap.NX.TrimBody(trim));
}
internal static Snap.NX.NXObject CreateNXObject(TaggedObject nxopenTaggedObject)
{
Snap.NX.NXObject obj2 = null;
NXOpen.NXObject nxopenObject = nxopenTaggedObject as NXOpen.NXObject;
if (nxopenObject != null)
{
obj2 = new Snap.NX.NXObject(nxopenObject);
NXOpen.Curve nxopenCurve = nxopenObject as NXOpen.Curve;
if (nxopenCurve != null)
{
obj2 = Snap.NX.Curve.CreateCurve(nxopenCurve);
}
switch (GetTypeFromTag(nxopenObject.Tag))
{
case ObjectTypes.Type.Point:
obj2 = new Snap.NX.Point((NXOpen.Point)nxopenObject);
break;
case ObjectTypes.Type.DatumPlane:
obj2 = new Snap.NX.DatumPlane((DatumPlaneFeature)nxopenObject);
break;
case ObjectTypes.Type.DatumAxis:
obj2 = new Snap.NX.DatumAxis((DatumAxisFeature)nxopenObject);
break;
case ObjectTypes.Type.CoordinateSystem:
obj2 = new Snap.NX.CoordinateSystem((NXOpen.CoordinateSystem)nxopenObject);
break;
case ObjectTypes.Type.Body:
obj2 = new Snap.NX.Body((NXOpen.Body)nxopenObject);
break;
case ObjectTypes.Type.Face:
obj2 = Snap.NX.Face.CreateFace((NXOpen.Face)nxopenObject);
break;
case ObjectTypes.Type.Edge:
obj2 = Snap.NX.Edge.CreateEdge((NXOpen.Edge)nxopenObject);
break;
case ObjectTypes.Type.Feature:
obj2 = Snap.NX.Feature.CreateFeature((NXOpen.Features.Feature)nxopenObject);
break;
case ObjectTypes.Type.Component:
return(new Snap.NX.Component((NXOpen.Assemblies.Component)nxopenObject));
}
}
return(obj2);
}
internal static Snap.NX.ProjectCurve CreateProjectCurve2(Snap.NX.DatumPlane datumPlane, Snap.NX.Curve[] curves, Snap.NX.Point[] points)
{
NXOpen.Part work = Globals.Session.Parts.Work;
NXOpen.Features.ProjectCurveBuilder featureBuilder = work.Features.CreateProjectCurveBuilder(null);
//featureBuilder.CurveFitData.Tolerance = Globals.DistanceTolerance;
featureBuilder.Tolerance = Globals.DistanceTolerance;
featureBuilder.AngleToProjectionVector.RightHandSide = "0";
featureBuilder.SectionToProject.DistanceTolerance = Globals.DistanceTolerance;
featureBuilder.SectionToProject.ChainingTolerance = (Globals.UnitType == Globals.Unit.Millimeter) ? 0.02413 : 0.00095;
featureBuilder.SectionToProject.SetAllowedEntityTypes(NXOpen.SectionEx.AllowTypes.CurvesAndPoints);
if (curves != null)
{
Snap.NX.Section sectionToProject = featureBuilder.SectionToProject;
for (int i = 0; i < curves.Length; i++)
{
sectionToProject.AddICurve(new Snap.NX.ICurve[] { curves[i] });
}
}
if (points != null)
{
NXOpen.Point[] pointArray = new NXOpen.Point[points.Length];
for (int j = 0; j < pointArray.Length; j++)
{
pointArray[j] = (NXOpen.Point)points[j];
}
CurveDumbRule rule = work.ScRuleFactory.CreateRuleCurveDumbFromPoints(pointArray);
featureBuilder.SectionToProject.AllowSelfIntersection(true);
SelectionIntentRule[] rules = new SelectionIntentRule[] { rule };
Point3d helpPoint = new Point3d(0.0, 0.0, 0.0);
featureBuilder.SectionToProject.AddToSection(rules, null, null, null, helpPoint, NXOpen.Section.Mode.Create, false);
}
Position origin = datumPlane.Origin;
Vector normal = datumPlane.Normal;
NXOpen.Plane plane = Globals.NXOpenWorkPart.Planes.CreatePlane((Point3d)origin, (Vector3d)normal, SmartObject.UpdateOption.WithinModeling);
featureBuilder.PlaneToProjectTo = plane;
NXOpen.Features.Feature feature = (NXOpen.Features.Feature)Snap.NX.Feature.CommitFeature(featureBuilder);
featureBuilder.SectionToProject.CleanMappingData();
featureBuilder.Destroy();
return((NXOpen.Features.ProjectCurve)feature);
}
internal static Snap.NX.TrimBody CreateTrimBody(Snap.NX.Body targetBody, Snap.NX.DatumPlane toolDatumPlane, bool direction)
{
NXOpen.Part workPart = (NXOpen.Part) Globals.WorkPart;
TrimBody2Builder featureBuilder = workPart.Features.CreateTrimBody2Builder(null);
featureBuilder.Tolerance = Globals.DistanceTolerance;
featureBuilder.BooleanTool.ExtrudeRevolveTool.ToolSection.DistanceTolerance = Globals.DistanceTolerance;
featureBuilder.BooleanTool.ExtrudeRevolveTool.ToolSection.ChainingTolerance = (Globals.UnitType == Globals.Unit.Millimeter) ? 0.02413 : 0.00095;
ScCollector collector = workPart.ScCollectors.CreateCollector();
NXOpen.Body[] bodies = new NXOpen.Body[] { targetBody };
BodyDumbRule rule = workPart.ScRuleFactory.CreateRuleBodyDumb(bodies);
SelectionIntentRule[] rules = new SelectionIntentRule[] { rule };
collector.ReplaceRules(rules, false);
featureBuilder.TargetBodyCollector = collector;
SelectionIntentRule[] ruleArray2 = new SelectionIntentRule[1];
NXOpen.DatumPlane[] faces = new NXOpen.DatumPlane[] { toolDatumPlane.NXOpenDatumPlaneFeature.DatumPlane };
ruleArray2[0] = workPart.ScRuleFactory.CreateRuleFaceDatum(faces);
featureBuilder.BooleanTool.FacePlaneTool.ToolFaces.FaceCollector.ReplaceRules(ruleArray2, false);
featureBuilder.BooleanTool.ReverseDirection = direction;
TrimBody2 trim = (TrimBody2) Snap.NX.Feature.CommitFeature(featureBuilder);
featureBuilder.Destroy();
return new Snap.NX.TrimBody(trim);
}
internal static Snap.NX.ProjectCurve CreateProjectCurve(Snap.NX.Curve[] curves, Snap.NX.Point[] points, Snap.NX.DatumPlane datumPlane)
{
NXOpen.Features.ProjectCurveBuilder featureBuilder = Globals.WorkPart.NXOpenPart.Features.CreateProjectCurveBuilder(null);
featureBuilder.CurveFitData.Tolerance = Globals.DistanceTolerance;
featureBuilder.AngleToProjectionVector.RightHandSide = "0";
featureBuilder.SectionToProject.DistanceTolerance = Globals.DistanceTolerance;
featureBuilder.SectionToProject.ChainingTolerance = (Globals.UnitType == Globals.Unit.Millimeter) ? 0.02413 : 0.00095;
featureBuilder.SectionToProject.SetAllowedEntityTypes(NXOpen.Section.AllowTypes.CurvesAndPoints);
Snap.NX.Section sectionToProject = featureBuilder.SectionToProject;
sectionToProject.AddICurve(curves);
sectionToProject.AddPoints(points);
Position origin = datumPlane.Origin;
Vector normal = datumPlane.Normal;
NXOpen.Plane plane = Globals.NXOpenWorkPart.Planes.CreatePlane((Point3d)origin, (Vector3d)normal, SmartObject.UpdateOption.WithinModeling);
featureBuilder.PlaneToProjectTo = plane;
NXOpen.Features.Feature feature = (NXOpen.Features.Feature)Snap.NX.Feature.CommitFeature(featureBuilder);
featureBuilder.SectionToProject.CleanMappingData();
featureBuilder.Destroy();
return((NXOpen.Features.ProjectCurve)feature);
}
