public void VendorComfirm(int chargeBackId, int userID, bool isPass, string Desc)
{
var dbcontext = ServiceProvider.GetDbcontext <IPurocumentDbcontext>();
var cb = dbcontext.ChargeBack.Include(i => i.PurchasingOrder).Single(s => s.ID == chargeBackId);
if (cb == null)
{
throw new Exception("退货计划不存在");
}
DateTime dateTimeNow = DateTime.Now;
int status = isPass ? (int)EnumPurchasingOrderState.VendorChargeBackComfirm : (int)EnumPurchasingOrderState.VendorChargeBackComfirm;
int auditType = isPass ? (int)EnumPurchasingAuditType.VendorChargeBackComfirm : (int)EnumPurchasingAuditType.VendorChargeBackComfirm;
//保存审核结果和修改计划状态
cb.PurchasingOrderStatusID = cb.PurchasingOrder.PurchasingOrderStatusID = status;
cb.UpdateTime = dateTimeNow;
cb.UpdateUserID = userID;
dbcontext.Update(cb);
var record = new PurchasingAudit()
{
PlanID = cb.PurchasingOrder.PurchasingPlanID,//退货 关联 订单的采购计划ID
Result = auditType,
UserID = userID,
Desc = Desc,
CreateTime = DateTime.Now
};
dbcontext.Add(record);
dbcontext.SaveChanges();
}
//采购计划审核（复审）
public void PlanAudit2(int planId, int userID, bool isPass, string Desc)
{
var dbcontext = ServiceProvider.GetDbcontext <IPurocumentDbcontext>();
var plan = dbcontext.PurchasingPlan.Single(s => s.ID == planId);
if (plan == null)
{
throw new Exception("采购计划不存在");
}
DateTime dateTimeNow = DateTime.Now;
int status = isPass ? (int)EnumPurchasingPlanState.PlanAudit2Pass : (int)EnumPurchasingPlanState.PlanAudit2Rejected;
int auditType = isPass ? (int)EnumPurchasingAuditType.PlanAudit2Pass : (int)EnumPurchasingAuditType.PlanAudit2Rejected;
//保存审核结果和修改计划状态
plan.Status = status;
plan.UpdateTime = dateTimeNow;
plan.UpdateUserID = userID;
dbcontext.Update(plan);
var record = new PurchasingAudit()
{
PlanID = planId,
Result = auditType,
UserID = userID,
Desc = Desc,
CreateTime = DateTime.Now
};
dbcontext.Add(record);
dbcontext.SaveChanges();
}
/// <summary>
/// 部门收货确认
/// </summary>
/// <param name="po"></param>
/// <param name="userID"></param>
public void CheckInOrder(int orderId, int userID, List <Model.PurchasingOrderDetailModel> ListOrderDetailIDAndActualCount)
{
if (orderId == 0)
{
throw new ArgumentNullException();
}
DateTime dateTimeNow = DateTime.Now;
int status = (int)EnumPurchasingOrderState.DeparmentCheckIn;
int auditType = (int)EnumPurchasingAuditType.DeparmentCheckIn;
var dbcontext = ServiceProvider.GetDbcontext <IPurocumentDbcontext>();
if (dbcontext.PurchasingOrder.Count(c => orderId.Equals(c.ID) && (c.PurchasingOrderStatusID.Equals((int)EnumPurchasingAuditType.VendorShipped) || c.PurchasingOrderStatusID.Equals((int)EnumPurchasingAuditType.DeparmentCheckIn))) > 0)
{
throw new Exception("订单状态不正确");
}
if (ListOrderDetailIDAndActualCount.Count < 1) //待更新的明细为0
{
return;
}
PurchasingOrder order = dbcontext.PurchasingOrder.Single <PurchasingOrder>(w => orderId.Equals(w.ID));
order.PurchasingOrderStatusID = status;
order.UpdateUserID = userID;
order.UpdateTime = dateTimeNow;
dbcontext.Update(order);
var updatePPDIDs = ListOrderDetailIDAndActualCount.Select(s => s.ID);
var details = dbcontext.PurchasingOrder.Include(r => r.Details).FirstOrDefault(en => en.ID == orderId);
var pods = from f in ListOrderDetailIDAndActualCount
join d in details.Details
on f.ID equals d.ID
select d;
foreach (var item in pods)
{
item.ActualCount = ListOrderDetailIDAndActualCount.FirstOrDefault(i => i.ID == item.ID).ActualCount;
item.ActualSubtotal = item.Price * item.ActualCount;
item.PurchasingOrderStateID = status;
item.UpdateUsrID = userID;
item.UpdateTime = dateTimeNow;
}
dbcontext.UpdateRange(pods);
PurchasingAudit pa = new PurchasingAudit()
{
PlanID = order.PurchasingPlanID,
UserID = userID,
CreateTime = dateTimeNow,
//Desc = Desc,
Result = auditType
};
dbcontext.Add(pa);
dbcontext.SaveChanges();
}
/// <summary>
/// 供应商发货确认
/// </summary>
public void ComfirmDelivery(int orderId, int userID, bool isPass, string Desc)
{
if (orderId == 0)
{
throw new ArgumentNullException();
}
DateTime dateTimeNow = DateTime.Now;
int status = (int)EnumPurchasingOrderState.VendorShipped; //isPass ? (int)PurchasingOrderStateEnum.VendorShipped : (int)PurchasingOrderStateEnum.Other;
int auditType = (int)EnumPurchasingAuditType.VendorShipped; //isPass ? (int)AuditTypeEnum.VendorShipped : (int)AuditTypeEnum.Other;
var dbcontext = ServiceProvider.GetDbcontext <IPurocumentDbcontext>();
if (dbcontext.PurchasingOrder.Count(c => orderId.Equals(c.ID) && c.PurchasingOrderStatusID != (int)EnumPurchasingOrderState.VendorConfirmed) > 0)
{
throw new Exception("订单状态不正确");
}
PurchasingOrder order = dbcontext.PurchasingOrder.Single <PurchasingOrder>(w => orderId.Equals(w.ID));
order.PurchasingOrderStatusID = status;
order.UpdateUserID = userID;
order.UpdateTime = dateTimeNow;
dbcontext.Update(order);
PurchasingAudit pa = new PurchasingAudit()
{
PlanID = order.PurchasingPlanID,
UserID = userID,
CreateTime = dateTimeNow,
Desc = Desc,
Result = auditType
};
dbcontext.Add(pa);
dbcontext.SaveChanges();
}
//提交三审 生成与供应商的订单及订单明细
public void ComfirmPlanAndSubmitOrder(int planId, int userID, bool isPass, string Desc)
{
var dbcontext = ServiceProvider.GetDbcontext <IPurocumentDbcontext>();
var plan = dbcontext.PurchasingPlan.SingleOrDefault(s => s.ID == planId);
if (plan == null)
{
throw new Exception("采购计划不存在");
}
DateTime dateTimeNow = DateTime.Now;
int planStatus = isPass ? (int)EnumPurchasingPlanState.PlanAudit3Pass : (int)EnumPurchasingPlanState.PlanAudit3Rejected;
int planAuditType = isPass ? (int)EnumPurchasingAuditType.PlanAudit3Pass : (int)EnumPurchasingAuditType.PlanAudit3Rejected;
int orderStatus = isPass ? (int)EnumPurchasingOrderState.AwaitVendorConfirm : (int)EnumPurchasingOrderState.AwaitVendorConfirm;
//保存审核结果和修改计划状态
plan.Status = planStatus;
plan.UpdateTime = dateTimeNow;
plan.UpdateUserID = userID;
dbcontext.Update(plan);///
PurchasingAudit insertPA = new PurchasingAudit
{
PlanID = plan.ID,
UserID = userID,
CreateTime = dateTimeNow,
Result = planAuditType,//审核状态 若复审通过及订单生成 故仅生成一条
Desc = Desc
};
dbcontext.Add(insertPA);///
///下面这段代码写得乱 性能应该也不高 Linq to EF语法不熟悉 后面要改
if (isPass) //审核通过
{
List <PurchasingOrder> insertListPOs = new List <PurchasingOrder>();
List <PurchasingOrderDetail> insertListPODs = new List <PurchasingOrderDetail>();
//采购计划的部门
var entityD = dbcontext.Department.SingleOrDefault(s => s.ID == plan.DepartmentID);
//采购计划明细
var entityPP = dbcontext.PurchasingPlan.Include(i => i.Details).SingleOrDefault(s => s.ID == plan.ID);
//按供应商分组,循环操作
var vendorIDs = entityPP.Details.Where(s => s.VendorID.HasValue).Select(s => s.VendorID).Distinct().ToList();//之前未去重，导致严重逻辑错误
//特殊情况下供应商尚未报价
if (vendorIDs == null || vendorIDs.Count == 0)
{
throw new Exception("不存在或未选定供应商");
}
//按供应商的循环操作
foreach (var vendorID in vendorIDs)
{
//按供应商的订单明细集合
var verdorPPDs = entityPP.Details.Where(w => vendorIDs.Contains(w.VendorID));
int itemCount = 0;
decimal?total = 0;
//一个供应商生成一个订单（因采购计划能为一种业务类型 要么食材 要么办公用品 故这里不按照业务类型再做拆分 数据库设计其实是支持的）
PurchasingOrder po = new PurchasingOrder
{
Code = StrPOPrefix + DateTime.Now.ToString(StrPOSuffixFormat), //[2][17]
PurchasingPlanID = plan.ID,
PurchasingOrderStatusID = orderStatus, //订单状态
VendorID = vendorID.Value,
DepartmentID = plan.DepartmentID,
Tel = entityD?.Tel,
Addr = entityD?.Address,
BizTypeID = plan.BizTypeID,
CreateUsrID = userID,
CreateTime = dateTimeNow,
UpdateUserID = userID,
UpdateTime = dateTimeNow,
Total = total,
ItemCount = itemCount
};
foreach (var vendorPPD in verdorPPDs)
{
//生成每个供应商分配的采购明细
PurchasingOrderDetail pod = new PurchasingOrderDetail
{
PurchasingOrder = po,
PurchasingOrderStateID = orderStatus,//订单状态
GoodsClassID = vendorPPD.GoodsClassID,
GoodsID = vendorPPD.GoodsID,
Count = vendorPPD.PurchasingCount,
Price = vendorPPD.Price,
Subtotal = vendorPPD.PurchasingCount * vendorPPD.Price,//这里之前没有结果
ActualCount = 0,
ActualSubtotal = 0,
CreateUsrID = userID,
CreateTime = dateTimeNow,
UpdateUsrID = userID,
UpdateTime = dateTimeNow,
PurchasingPlanDetailID = vendorPPD.ID
};
insertListPODs.Add(pod); //订单明细
po.Total += pod.Subtotal; //累计每种商品的小计金额
po.ItemCount++; //明细数量
//更新采购计划、采购计划明细状态
vendorPPD.Status = planStatus; //采购状态
dbcontext.Update(vendorPPD); /// 更新PPD
}
insertListPOs.Add(po);/// // 订单
}
dbcontext.AddRange(insertListPOs);
dbcontext.AddRange(insertListPODs);
}
dbcontext.SaveChanges();
}
//采购计划审核（初审）
public void PlanAudit(int planId, int userID, bool isPass, string Desc)
{
var dbcontext = ServiceProvider.GetDbcontext <IPurocumentDbcontext>();
var plan = dbcontext.PurchasingPlan.Single(s => s.ID == planId);
if (plan == null)
{
throw new Exception("采购计划不存在");
}
DateTime dateTimeNow = DateTime.Now;
int status = isPass ? (int)EnumPurchasingPlanState.PlanAudit1Pass : (int)EnumPurchasingPlanState.PlanAudit1Rejected;
int auditType = isPass ? (int)EnumPurchasingAuditType.PlanAudit1Pass : (int)EnumPurchasingAuditType.PlanAudit1Rejected;
//保存审核结果和修改计划状态
plan.Status = status;
plan.UpdateTime = dateTimeNow;
plan.UpdateUserID = userID;
int intDeparmentID = plan.DepartmentID;
string strCode = plan.Code;
string strDateTime = dateTimeNow.ToString(StrDateTimeFormat);
string result = isPass ? "通过" : $"未通过:{Desc}";
string title = string.Empty;
string content = string.Empty;
string toUsrID = string.Empty;
dbcontext.Update(plan);
var record = new PurchasingAudit()
{
PlanID = planId,
Result = auditType,
UserID = userID,
Desc = Desc,
CreateTime = DateTime.Now
};
dbcontext.Add(record);
dbcontext.SaveChanges();
Usr usr = dbcontext.Usr.SingleOrDefault(s => s.ID == userID);
Department department = dbcontext.Department.SingleOrDefault(s => s.ID == intDeparmentID);
if (isPass)
{
var toUsrs = dbcontext.Usr.Where(w =>
w.RoleID == (int)EnumRole.测试 ||
w.RoleID == (int)EnumRole.采购总监
).ToList();
var toUsrIDs = toUsrs.Select(s => s.WechatID);
var toUserWechatIDs = toUsrs.Select(s => s.WechatID);
toUsrID = string.Join("|", toUsrs.Select(s => s.WechatID).ToArray());
title = "待复审采购计划";
content = $"编号:{strCode} 部门:{department.Name}";
MessageService.Post(
toUsrID,
title,
strDateTime,
content
);
}
else
{
var toUsrs = dbcontext.Usr.Where(w =>
w.RoleID == (int)EnumRole.测试 ||
w.RoleID == (int)EnumRole.采购主管
).ToList();
var toUsrIDs = toUsrs.Select(s => s.WechatID);
var toUserWechatIDs = toUsrs.Select(s => s.WechatID);
toUsrID = string.Join("|", toUsrs.Select(s => s.WechatID).ToArray());
title = "采购计划复审驳回";
content = $"编号:{strCode} 复审结果:{result}";
}
}