public void SaveLevelData()
{
GeneratedPoint[] points = initialPoint.GetComponentsInChildren <GeneratedPoint>();
PointMap pointMap = ScriptableObject.CreateInstance <PointMap>();
pointMap.points = new Vector2[points.Length];
for (int i = 0; i < points.Length; i++)
{
pointMap.points[i] = points[i].transform.position;
}
AssetDatabase.CreateAsset(pointMap, "Assets/Levels/" + fileName + ".asset");
AssetDatabase.SaveAssets();
AssetDatabase.Refresh();
}
public MapGraph(TriangleNet.Mesh mesh, PointMap pointMap, int xOffset, int yOffset)
{
this.pointMap = pointMap;
this.xOffset = xOffset;
this.yOffset = yOffset;
CreateTriangleGraph(mesh);
List <Line> edges = new List <Line>();
foreach (var seg in mesh.Segments)
{
var p1 = new Point(seg.GetVertex(0));
var p2 = new Point(seg.GetVertex(1));
edges.Add(new Line(p1, p2));
}
this.interiorEdges = edges.ToArray();
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public Result calculatePointMap(List <Circle> circleList)
{
pointMap = new PointMap();
this.PunchingToolList[0].X = circleList[0].Diameter;
// Create the pointMap
foreach (Circle circle in circleList)
{
pointMap.AddPoint(new PunchingPoint(circle.Center));
}
SortedDictionary <int, PunchingPoint> xDict0 = null;
SortedDictionary <int, PunchingPoint> xDict1 = null;
if (pointMap.Count > 0)
{
xDict0 = pointMap.getXDictionary(0);
}
if (pointMap.Count > 1)
{
xDict1 = pointMap.getXDictionary(1);
}
if (xDict0.Count > 2)
{
XSpacing = Math.Abs(xDict0.ElementAt(1).Value.Point.X - xDict0.ElementAt(0).Value.Point.X);
}
if (xDict0.Count > 1 && xDict1.Count > 1)
{
YSpacing = Math.Abs(xDict1.ElementAt(0).Value.Point.Y - xDict0.ElementAt(0).Value.Point.Y);
}
return(Result.Success);
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
List <PointMap> pointMapList = new List <PointMap>();
Random random = new Random();
PointMap pointMapTool1 = new PointMap();
pointMapList.Add(pointMapTool1);
double marginX;
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
int punchQtyX = ((int)((spanX - punchingToolList[0].X) / XSpacing)) + 1;
double secondRowOffset = pitch * Math.Cos(Math.PI * 60 / 180);
if (spanX >= ((punchQtyX - 1) * XSpacing + secondRowOffset + punchingToolList[0].X))
{
marginX = (spanX - ((punchQtyX - 1) * XSpacing) - secondRowOffset) / 2;
}
else
{
marginX = (spanX - ((punchQtyX - 1) * XSpacing)) / 2;
}
int punchQtyY = ((int)((spanY - punchingToolList[0].Y) / YSpacing)) + 1;
double marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX;
double firstY = min.Y + marginY;
// Record the current layer
int currentLayer = doc.Layers.CurrentLayerIndex;
// Create Perforation Layer
// if (punchingToolList[0].ClusterTool.Enable == true)
{
// RhinoUtilities.SetActiveLayer(Properties.Settings.Default.PerforationLayerName, System.Drawing.Color.Green);
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
}
//else
//{
// if (MetrixUtilities.IsLayerFound("PerfTemporaryLayer"))
// {
// RhinoUtilities.SetActiveLayer("TemporaryToolHit", System.Drawing.Color.Black);
// }
// else
// {
// RhinoUtilities.SetActiveLayer(Properties.Settings.Default.ToolHitLayerName, System.Drawing.Color.Black);
// }
//}
bool drawSimpleToolHit = true;
for (int i = 0; i < punchingToolList.Count; i++)
{
// Only draw cluster tool if it is enable
if (punchingToolList[i].ClusterTool.Enable == true)
{
// Draw the cluster tool
drawSimpleToolHit = false;
break;
}
}
if (drawSimpleToolHit)
{
int currentlayer = doc.Layers.Find("Tool Hit", true);
if (currentlayer < 0)
{
currentlayer = doc.Layers.Add("Tool Hit", System.Drawing.Color.Black);
}
doc.Layers.SetCurrentLayerIndex(currentlayer, true);
for (int y = 0; y < punchQtyY; y++)
{
if (y % 2 == 0) // even rows
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
if (random.NextDouble() < randomness)
{
pointMapTool1.AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
}
}
else // odd rows
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + secondRowOffset + (x * XSpacing), firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
if (random.NextDouble() < randomness)
{
pointMapTool1.AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
}
}
}
}
else
{
for (int y = 0; y < punchQtyY; y++)
{
if (y % 2 == 0) // even rows
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
if (random.NextDouble() < randomness)
{
pointMapTool1.AddPoint(new PunchingPoint(point));
if (PunchingToolList[0].Perforation)
{
punchingToolList[0].drawTool(point);
}
}
}
}
}
else // odd rows
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + secondRowOffset + (x * XSpacing), firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
if (random.NextDouble() < randomness)
{
pointMapTool1.AddPoint(new PunchingPoint(point));
if (PunchingToolList[0].Perforation)
{
punchingToolList[0].drawTool(point);
}
}
}
}
}
}
}
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
double toolArea = punchingToolList[0].getArea() * pointMapTool1.Count;
RhinoApp.WriteLine("Tool area: {0} mm^2", toolArea.ToString("#.##"));
openArea = toolArea * 100 / area.Area;
RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
// Draw the cluster for each tool
for (int i = 0; i < punchingToolList.Count; i++)
{
// Only draw cluster tool if it is enable
if (punchingToolList[i].ClusterTool.Enable == true)
{
// Draw the cluster tool
drawCluster(pointMapList[i], punchingToolList[i]);
}
}
doc.Views.Redraw();
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(openArea);
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
PointMap[] pointMap = new PointMap[AtomicNumber];
for (int x = 0; x < AtomicNumber; ++x)
{
pointMap[x] = new PointMap();
}
int[] toolHitArray = Enumerable.Repeat(0, atomicNumber).ToArray();
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
int punchQtyX = ((int)((spanX - punchingToolList[0].X) / XSpacing)) + 1;
double marginX = (spanX - ((punchQtyX - 1) * XSpacing)) / 2;
int punchQtyY = ((int)((spanY - punchingToolList[0].Y) / YSpacing)) + 1;
double marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX;
double firstY = min.Y + marginY;
Point3d origin = new Point3d(firstX, firstY, 0);
int currentLayer = doc.Layers.CurrentLayerIndex;
// Random Engine
RandomTiler randomTileEngine = new RandomTiler();
int totalQty = punchQtyX * punchQtyY;
// except the last tool percentage will be total - all tool hit
List <double> toolHitPercentage = new List <double>(atomicNumber - 1);
double average = 1 / (double)atomicNumber;
double minPercentage = (average - 0.125 * average);
//for (int i = 0; i < atomicNumber-1; i++)
//{
// toolHitPercentage.Add(minPercentage + random.NextDouble() * (2*0.125* average));
//}
double totalPercentage = 0;
for (int i = 0; i < atomicNumber - 1; i++)
{
if (PunchingToolList[i].Gap > 1)
{
PunchingToolList[i].Gap = 1;
}
if (totalPercentage + PunchingToolList[i].Gap <= 1)
{
totalPercentage += PunchingToolList[i].Gap;
toolHitPercentage.Add(PunchingToolList[i].Gap);
}
else
{
totalPercentage = 1;
PunchingToolList[i].Gap = 1 - totalPercentage;
toolHitPercentage.Add(PunchingToolList[i].Gap);
}
}
int toolHitCount = 0;
List <int> tileCounts = new List <int>();
foreach (double pc in toolHitPercentage)
{
int toolHitQty = (int)(totalQty * pc);
tileCounts.Add(toolHitQty);
toolHitCount = toolHitCount + toolHitQty;
}
randomTileEngine.Weight = new int[5, 5]
{
{ 1, 1, 2, 1, 1 },
{ 1, 2, 2, 2, 1 },
{ 2, 2, 0, 2, 2 },
{ 1, 2, 2, 2, 1 },
{ 1, 1, 2, 1, 1 }
};
tileCounts.Add(totalQty - toolHitCount);
int[,] tileMap = randomTileEngine.GetTileMap(tileCounts, punchQtyX, punchQtyY);
int[] toolHitCounter = new int[atomicNumber];
int type;
bool drawClusterToolHit = false;
for (int i = 0; i < punchingToolList.Count; i++)
{
// Only draw cluster tool if it is enable
if (punchingToolList[i].ClusterTool.Enable == true)
{
// Draw the cluster tool
drawClusterToolHit = true;
break;
}
}
int perforationLayer = currentLayer;
int toolHitlayer = doc.Layers.Find("Tool Hit", true);
if (toolHitlayer < 0)
{
toolHitlayer = doc.Layers.Add("Tool Hit", System.Drawing.Color.Black);
}
doc.Layers.SetCurrentLayerIndex(toolHitlayer, true);
for (int y = 0; y < punchQtyY; y++)
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
type = tileMap[x, y] - 1;
if (punchingToolList[type].ClusterTool.Enable == true)
{
doc.Layers.SetCurrentLayerIndex(perforationLayer, true);
}
else
{
doc.Layers.SetCurrentLayerIndex(toolHitlayer, true);
}
if (punchingToolList[type].isInside(boundaryCurve, point) == true)
{
pointMap[type].AddPoint(new PunchingPoint(point));
for (int t = type; t < AtomicNumber; t++)
{
pointMap[t].AddPoint(new PunchingPoint(point));
}
if (PunchingToolList[type].ClusterTool.Enable == false)
{
punchingToolList[type].drawTool(point);
if (punchingToolList[type].Perforation == true && drawClusterToolHit == true)
{
doc.Layers.SetCurrentLayerIndex(perforationLayer, true);
punchingToolList[type].drawTool(point);
}
}
else if (punchingToolList[type].Perforation == true)
{
punchingToolList[type].drawTool(point);
}
toolHitArray[type]++;
}
}
}
Rhino.DocObjects.RhinoObject [] perforations = doc.Objects.FindByLayer("Perforation");
foreach (var perforation in perforations)
{
perforation.Attributes.DisplayOrder = 1;
perforation.CommitChanges();
}
doc.Views.Redraw();
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
double toolArea = 0;
double totalToolArea = 0;
for (int i = 0; i < this.atomicNumber; i++)
{
toolArea = punchingToolList[i].getArea() * toolHitArray[i];
totalToolArea = totalToolArea + toolArea;
RhinoApp.WriteLine("Tool area{0}: {1} mm^2", i, toolArea.ToString("#.##"));
}
openArea = totalToolArea * 100 / area.Area;
RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
// Draw the cluster for each tool
for (int i = 0; i < punchingToolList.Count; i++)
{
// Only draw cluster tool if it is enable
if (punchingToolList[i].ClusterTool.Enable == true)
{
// Draw the cluster tool
drawCluster(pointMap[i], punchingToolList[i]);
}
}
doc.Views.Redraw();
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(openArea);
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
List <PointMap> pointMapList = new List <PointMap>();
PointMap pointMapTool1 = new PointMap();
pointMapList.Add(pointMapTool1);
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
int punchQtyX = ((int)((spanX - punchingToolList[0].X) / XSpacing)) + 1;
double marginX = (spanX - ((punchQtyX - 1) * XSpacing)) / 2;
double YSpacing = XSpacing;
int punchQtyY = ((int)((spanY - punchingToolList[0].Y) / YSpacing)) + 1;
double marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX;
double firstY = min.Y + marginY;
// Set the current layer
int currentLayer = doc.Layers.CurrentLayerIndex;
doc.Layers.SetCurrentLayerIndex(currentLayer, false);
// We don't use cluster tool so just perf it onto Tool Hit layer
//if (!MetrixUtilities.IsLayerFound("TemporaryPerfLayer"))
//{
// RhinoUtilities.SetActiveLayer(Properties.Settings.Default.ToolHitLayerName, System.Drawing.Color.Black);
//}
//else
//{
// RhinoUtilities.SetActiveLayer("TemporaryToolHit", System.Drawing.Color.Black);
//}
// Generate the point map first
for (int y = 0; y < punchQtyY; y++)
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMapTool1.AddPoint(new PunchingPoint(point));
}
}
}
Random random = new Random();
int testResult;
int slotNumber = 1;
PunchingTools.Obround threeHoleSlot = new PunchingTools.Obround();
threeHoleSlot.X = 2 * this.XSpacing + punchingToolList[0].X;
threeHoleSlot.Y = punchingToolList[0].X;
PunchingTools.Obround fiveHoleSlot = new PunchingTools.Obround();
fiveHoleSlot.X = 4 * this.XSpacing + punchingToolList[0].X;
fiveHoleSlot.Y = punchingToolList[0].X;
int chanceForHoles = 60;
int chanceForMidSlot = 86;
int chanceForLargeSlot = 100;
int holeCounter = 0;
int midSlotCounter = 0;
int largeSlotCounter = 0;
double toolArea = 0;
// Go through each point in the point Map list to determine whether it is a hole or a slot.
for (int i = 0; i < pointMapTool1.YCount; i++)
{
SortedDictionary <int, PunchingPoint> xDict = pointMapTool1.getXDictionary(i);
chanceForHoles = 60;
chanceForMidSlot = 86;
chanceForLargeSlot = 100;
for (int j = 0; j < xDict.Count; j = j + slotNumber)
{
if (xDict.Count - j > 4)
{
// Generate whether the current hole
testResult = random.Next(1, chanceForLargeSlot);
}
else if (xDict.Count - j > 2)
{
chanceForHoles = 30;
chanceForMidSlot = 66;
chanceForLargeSlot = 100;
// Generate whether the current slot
testResult = random.Next(1, chanceForMidSlot);
}
else
{
chanceForHoles = 30;
chanceForMidSlot = 66;
chanceForLargeSlot = 100;
// Generate whether the current large slot
testResult = random.Next(1, chanceForHoles);
}
if (testResult >= 1 && testResult <= chanceForHoles)
{
slotNumber = 1;
holeCounter++;
midSlotCounter = 0;
largeSlotCounter = 0;
if (holeCounter == 1)
{
chanceForHoles = 60;
chanceForMidSlot = 86;
chanceForLargeSlot = 100;
}
else if (holeCounter == 2)
{
chanceForHoles = 30;
chanceForMidSlot = 66;
chanceForLargeSlot = 100;
}
else if (holeCounter > 2)
{
chanceForHoles = 10;
chanceForMidSlot = 53;
chanceForLargeSlot = 100;
}
// Draw circle
punchingToolList[0].drawTool(xDict.ElementAt(j).Value.Point);
toolArea += punchingToolList[0].getArea();
}
else if (testResult > chanceForHoles && testResult <= chanceForMidSlot)
{
slotNumber = 3;
holeCounter = 0;
midSlotCounter++;
largeSlotCounter = 0;
if (midSlotCounter == 1)
{
chanceForHoles = 80;
chanceForMidSlot = 90;
chanceForLargeSlot = 100;
}
else if (midSlotCounter > 1)
{
chanceForHoles = 85;
chanceForMidSlot = 93;
chanceForLargeSlot = 100;
}
// Draw slot that span over 3 holes
threeHoleSlot.drawTool(xDict.ElementAt(j + 1).Value.Point);
toolArea += threeHoleSlot.getArea();
}
else if (testResult > chanceForMidSlot && testResult <= chanceForLargeSlot)
{
slotNumber = 5;
holeCounter = 0;
midSlotCounter = 0;
largeSlotCounter++;
if (largeSlotCounter >= 1)
{
chanceForHoles = 80;
chanceForMidSlot = 100;
chanceForLargeSlot = 100;
}
// Draw slot that span over 5 holes
fiveHoleSlot.drawTool(xDict.ElementAt(j + 2).Value.Point);
toolArea += fiveHoleSlot.getArea();
}
}
}
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
RhinoApp.WriteLine("Tool area: {0} mm^2", toolArea.ToString("#.##"));
openArea = toolArea * 100 / area.Area;
RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
//for (int y = 0; y < punchQtyY; y++)
//{
// for (int x = 0; x < punchQtyX; x++)
// {
// point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
// if (punchingToolList[0].isInside(boundaryCurve, point) == true)
// {
// pointMap.AddPoint(new PunchingPoint(point));
// punchingToolList[0].drawTool(point);
// }
// if(random.NextDouble() < randomness)
// {
// if (punchingToolList[1].isInside(boundaryCurve, point) == true)
// {
// doc.Layers.SetCurrentLayerIndex(brailleLayerIndex, true);
// punchingToolList[1].drawTool(point);
// doc.Layers.SetCurrentLayerIndex(perforationlayerIndex, true);
// }
// }
// }
//}
doc.Views.Redraw();
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(openArea);
}
public CardGrouping(int numBins, PointMap scoring)
{
array = new CardCollection[numBins];
Reset();
score = scoring;
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
List <PointMap> pointMapList = new List <PointMap>();
PointMap pointMapTool1 = new PointMap();
PointMap pointMapTool2 = new PointMap();
PointMap pointMapTool3 = new PointMap();
pointMapList.Add(pointMapTool1);
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
double gap = XSpacing - punchingToolList[0].X;
int punchQtyX = ((int)((spanX - punchingToolList[0].X - gap) / XSpacing)) + 1;
double marginX = (spanX - (((punchQtyX - 1) * XSpacing) - gap)) / 2;
// Debug purpose
// marginX = 0;
double YSpacing = XSpacing;
int punchQtyY = ((int)((spanY - punchingToolList[0].Y) / YSpacing)) + 1;
double marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX + gap;
double firstY = min.Y + marginY;
// Set the current layer
int currentLayer = doc.Layers.CurrentLayerIndex;
doc.Layers.SetCurrentLayerIndex(currentLayer, false);
// We don't use cluster tool so just perf it onto Tool Hit layer
//if (!MetrixUtilities.IsLayerFound("TemporaryPerfLayer")){
// RhinoUtilities.SetActiveLayer(Properties.Settings.Default.ToolHitLayerName, System.Drawing.Color.Black);
//}else{
// RhinoUtilities.SetActiveLayer("TemporaryToolHit", System.Drawing.Color.Black);
//}
double runningX = firstX - punchingToolList[0].X / 2;
double twoToolTest;
double threeToolTest;
Random random = new Random();
int roundToolCounter = 0;
int slotToolCounter = 0;
int tool0Counter = 0;
int tool1Counter = 0;
int tool2Counter = 0;
bool isToolHit = false;
int toolMissingCounter = 0;
// Generate the pattern
for (int y = 0; y < punchQtyY; y++)
{
// For even rows
if (random.NextDouble() < randomness || toolMissingCounter > 0)
{
isToolHit = true;
toolMissingCounter = 0;
}
else
{
isToolHit = false;
toolMissingCounter++;
}
if (y % 2 == 0)
{
// firstX = min.X + marginX + gap;
runningX = min.X + gap;
twoToolTest = random.Next(42);
// Small slot
if (twoToolTest < 14)
{
point = new Point3d(runningX + punchingToolList[1].X / 2, firstY + y * YSpacing, 0);
pointMapTool2.AddPoint(new PunchingPoint(point));
runningX = runningX + punchingToolList[1].X + gap;
punchingToolList[1].drawTool(point);
if (isToolHit)
{
slotToolCounter = 1;
tool1Counter++;
}
}
else // Big slot
{
point = new Point3d(runningX + punchingToolList[2].X / 2, firstY + y * YSpacing, 0);
pointMapTool3.AddPoint(new PunchingPoint(point));
runningX = runningX + punchingToolList[2].X + gap;
slotToolCounter = 1;
if (isToolHit)
{
tool2Counter++;
punchingToolList[2].drawTool(point);
}
}
}
else
{
//firstX = min.X + marginX;
//runningX = firstX - punchingToolList[0].X / 2;
runningX = min.X;
point = new Point3d(runningX + punchingToolList[0].X / 2, firstY + y * YSpacing, 0);
pointMapTool1.AddPoint(new PunchingPoint(point));
runningX = runningX + punchingToolList[0].X + gap;
roundToolCounter = 1;
if (isToolHit)
{
tool0Counter++;
punchingToolList[0].drawTool(point);
}
}
//
for (int x = 0; x < punchQtyX; x++)
{
// Skip if the point already taken up by the tool
if (runningX > firstX + x * XSpacing)
{
continue;
}
if (random.NextDouble() < randomness || toolMissingCounter > 0)
{
isToolHit = true;
toolMissingCounter = 0;
}
else
{
isToolHit = false;
toolMissingCounter++;
}
threeToolTest = random.Next(100);
if (threeToolTest < 16 && slotToolCounter < 2)
{
point = new Point3d(runningX + punchingToolList[1].X / 2, firstY + y * YSpacing, 0);
pointMapTool2.AddPoint(new PunchingPoint(point));
runningX = runningX + punchingToolList[1].X + gap;
roundToolCounter = 0;
slotToolCounter++;
if (isToolHit)
{
tool1Counter++;
punchingToolList[1].drawTool(point);
}
}
else if (threeToolTest < 47 && slotToolCounter < 2)
{
point = new Point3d(runningX + punchingToolList[2].X / 2, firstY + y * YSpacing, 0);
pointMapTool3.AddPoint(new PunchingPoint(point));
runningX = runningX + punchingToolList[2].X + gap;
roundToolCounter = 0;
slotToolCounter++;
if (isToolHit)
{
tool2Counter++;
punchingToolList[2].drawTool(point);
}
}
else if (threeToolTest >= 47 && roundToolCounter < 4)
{
point = new Point3d(runningX + punchingToolList[0].X / 2, firstY + y * YSpacing, 0);
pointMapTool1.AddPoint(new PunchingPoint(point));
runningX = runningX + punchingToolList[0].X + gap;
roundToolCounter++;
slotToolCounter = 0;
if (isToolHit)
{
tool0Counter++;
punchingToolList[0].drawTool(point);
}
}
else
{
x--;
}
}
}
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
double tool0Area = punchingToolList[0].getArea() * tool0Counter;
double tool1Area = punchingToolList[1].getArea() * tool1Counter;
double tool2Area = punchingToolList[2].getArea() * tool2Counter;
double totalToolArea = tool0Area + tool1Area + tool2Area;
RhinoApp.WriteLine("Tool 1 area: {0} mm^2", tool0Area.ToString("#.##"));
RhinoApp.WriteLine("Tool 2 area: {0} mm^2", tool1Area.ToString("#.##"));
RhinoApp.WriteLine("Tool 3 area: {0} mm^2", tool2Area.ToString("#.##"));
double openArea = (totalToolArea * 100) / area.Area;
RhinoApp.WriteLine("Open area: {0} %", openArea.ToString("#.##"));
//int testResult;
//int slotNumber = 1;
//PunchingTools.Obround threeHoleSlot = new PunchingTools.Obround();
//threeHoleSlot.X = 2*this.XSpacing + punchingToolList[0].X;
//threeHoleSlot.Y = punchingToolList[0].X;
//PunchingTools.Obround fiveHoleSlot = new PunchingTools.Obround();
//fiveHoleSlot.X = 4 * this.XSpacing + punchingToolList[0].X;
//fiveHoleSlot.Y = punchingToolList[0].X;
//int chanceForHoles = 60;
//int chanceForMidSlot = 86;
//int chanceForLargeSlot = 100;
//int holeCounter = 0;
//int midSlotCounter = 0;
//int largeSlotCounter = 0;
//double toolArea = 0;
// // Go through each point in the point Map list to determine whether it is a hole or a slot.
//for (int i = 0; i < pointMapTool1.YCount; i++)
//{
// SortedDictionary<int, PunchingPoint> xDict = pointMapTool1.getXDictionary(i);
// chanceForHoles = 60;
// chanceForMidSlot = 86;
// chanceForLargeSlot = 100;
// for (int j = 0; j < xDict.Count; j = j + slotNumber)
// {
// if (xDict.Count - j > 4)
// {
// // Generate whether the current hole
// testResult = random.Next(1, chanceForLargeSlot);
// }
// else if (xDict.Count - j > 2)
// {
// chanceForHoles = 30;
// chanceForMidSlot = 66;
// chanceForLargeSlot = 100;
// // Generate whether the current slot
// testResult = random.Next(1, chanceForMidSlot);
// }
// else
// {
// chanceForHoles = 30;
// chanceForMidSlot = 66;
// chanceForLargeSlot = 100;
// // Generate whether the current large slot
// testResult = random.Next(1, chanceForHoles);
// }
// if (testResult >= 1 && testResult <= chanceForHoles)
// {
// slotNumber = 1;
// holeCounter++;
// midSlotCounter = 0;
// largeSlotCounter = 0;
// if (holeCounter == 1)
// {
// chanceForHoles = 60;
// chanceForMidSlot = 86;
// chanceForLargeSlot = 100;
// }
// else if(holeCounter == 2)
// {
// chanceForHoles = 30;
// chanceForMidSlot = 66;
// chanceForLargeSlot = 100;
// }
// else if(holeCounter > 2)
// {
// chanceForHoles = 10;
// chanceForMidSlot = 53;
// chanceForLargeSlot = 100;
// }
// // Draw circle
// punchingToolList[0].drawTool(xDict.ElementAt(j).Value.Point);
// toolArea += punchingToolList[0].getArea();
// }
// else if (testResult > chanceForHoles && testResult <= chanceForMidSlot)
// {
// slotNumber = 3;
// holeCounter = 0;
// midSlotCounter++;
// largeSlotCounter = 0;
// if (midSlotCounter == 1)
// {
// chanceForHoles = 80;
// chanceForMidSlot = 90;
// chanceForLargeSlot = 100;
// }
// else if(midSlotCounter > 1)
// {
// chanceForHoles = 85;
// chanceForMidSlot = 93;
// chanceForLargeSlot = 100;
// }
// // Draw slot that span over 3 holes
// threeHoleSlot.drawTool(xDict.ElementAt(j + 1).Value.Point);
// toolArea += threeHoleSlot.getArea();
// }
// else if (testResult > chanceForMidSlot && testResult <= chanceForLargeSlot)
// {
// slotNumber = 5;
// holeCounter = 0;
// midSlotCounter = 0;
// largeSlotCounter++;
// if(largeSlotCounter >= 1)
// {
// chanceForHoles = 80;
// chanceForMidSlot = 100;
// chanceForLargeSlot = 100;
// }
// // Draw slot that span over 5 holes
// fiveHoleSlot.drawTool(xDict.ElementAt(j + 2).Value.Point);
// toolArea += fiveHoleSlot.getArea();
// }
// }
//}
// Display the open area calculation
//AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
//RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
// RhinoApp.WriteLine("Tool area: {0} mm^2", toolArea.ToString("#.##"));
// openArea = toolArea * 100 / area.Area;
// RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
//for (int y = 0; y < punchQtyY; y++)
//{
// for (int x = 0; x < punchQtyX; x++)
// {
// point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
// if (punchingToolList[0].isInside(boundaryCurve, point) == true)
// {
// pointMap.AddPoint(new PunchingPoint(point));
// punchingToolList[0].drawTool(point);
// }
// if(random.NextDouble() < randomness)
// {
// if (punchingToolList[1].isInside(boundaryCurve, point) == true)
// {
// doc.Layers.SetCurrentLayerIndex(brailleLayerIndex, true);
// punchingToolList[1].drawTool(point);
// doc.Layers.SetCurrentLayerIndex(perforationlayerIndex, true);
// }
// }
// }
//}
doc.Views.Redraw();
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(openArea);
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
PointMap pointMap = new PointMap();
int[] toolHitArray = Enumerable.Repeat(0, 3).ToArray();
double marginX;
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
int punchQtyX = ((int)((spanX - punchingToolList[0].X) / XSpacing)) + 1;
double secondRowOffset = pitch * Math.Cos(Math.PI * 60 / 180);
if (spanX >= ((punchQtyX - 1) * XSpacing + secondRowOffset + punchingToolList[0].X))
{
marginX = (spanX - ((punchQtyX - 1) * XSpacing) - secondRowOffset) / 2;
}
else
{
marginX = (spanX - ((punchQtyX - 1) * XSpacing)) / 2;
}
int punchQtyY = ((int)((spanY - punchingToolList[0].Y) / YSpacing)) + 1;
double marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX;
double firstY = min.Y + marginY;
// Record the current layer
int currentLayer = doc.Layers.CurrentLayerIndex;
// Set the layer to perforation
//if (!MetrixUtilities.IsLayerFound("TemporaryPerfLayer"))
//{
// RhinoUtilities.SetActiveLayer(Properties.Settings.Default.ToolHitLayerName, System.Drawing.Color.Black);
//}
//else
//{
// RhinoUtilities.SetActiveLayer("TemporaryToolHit", System.Drawing.Color.Black);
//}
// Random Engine
RandomTiler randomTileEngine = new RandomTiler();
int totalQty = punchQtyX * punchQtyY;
// except the last tool percentage will be total - all tool hit
List <double> toolHitPercentage = new List <double>(3);
toolHitPercentage.Add(0.368);
toolHitPercentage.Add(0.177);
// Create randomness for tool count
random = new Random();
int toolHitCount = 0;
// Create tile counts
List <int> tileCounts = new List <int>();
foreach (double pc in toolHitPercentage)
{
int toolHitQty = (int)(totalQty * pc);
tileCounts.Add(toolHitQty);
toolHitCount = toolHitCount + toolHitQty;
}
tileCounts.Add(totalQty - toolHitCount);
randomTileEngine.Weight = new int[5, 5]
{
{ 1, 1, 2, 1, 1 },
{ 1, 2, 3, 2, 1 },
{ 2, 3, 0, 3, 2 },
{ 1, 2, 3, 2, 1 },
{ 1, 1, 2, 1, 1 }
};
int[,] tileMap = randomTileEngine.GetTileMap(tileCounts, punchQtyX, punchQtyY);
int[] toolHitCounter = new int[3];
for (int y = 0; y < punchQtyY; y++)
{
if (y % 2 == 0) // even rows
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMap.AddPoint(new PunchingPoint(point));
punchingToolList[tileMap[x, y] - 1].drawTool(point);
toolHitArray[tileMap[x, y] - 1]++;
}
}
}
else // odd rows
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + secondRowOffset + (x * XSpacing), firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMap.AddPoint(new PunchingPoint(point));
punchingToolList[tileMap[x, y] - 1].drawTool(point);
toolHitArray[tileMap[x, y] - 1]++;
}
}
}
}
//for (int y = 0; y < punchQtyY; y++)
//{
// for (int x = 0; x < punchQtyX; x++)
// {
// point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
// if (punchingToolList[0].isInside(boundaryCurve, point) == true)
// {
// pointMap.AddPoint(new PunchingPoint(point));
// punchingToolList[tileMap[x, y]-1].drawTool(point);
// toolHitArray[tileMap[x, y]-1]++;
// }
// }
//}
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
double toolArea = 0;
double totalToolArea = 0;
for (int i = 0; i < 3; i++)
{
toolArea = punchingToolList[i].getArea() * toolHitArray[i];
totalToolArea = totalToolArea + toolArea;
RhinoApp.WriteLine("Tool area{0}: {1} mm^2", i, toolArea.ToString("#.##"));
}
openArea = totalToolArea * 100 / area.Area;
RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
// Draw the cluster for each tool
for (int i = 0; i < punchingToolList.Count; i++)
{
// Only draw cluster tool if it is enable
if (punchingToolList[i].ClusterTool.Enable == true)
{
// Draw the cluster tool
drawCluster(pointMap, punchingToolList[i]);
}
}
doc.Views.Redraw();
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(openArea);
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
List <PointMap> pointMapList = new List <PointMap>();
Random random = new Random();
PointMap pointMapTool0 = new PointMap();
PointMap pointMapTool1 = new PointMap();
pointMapList.Add(pointMapTool0);
pointMapList.Add(pointMapTool1);
double marginX;
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
int punchQtyX = ((int)((spanX - punchingToolList[0].X) / XSpacing)) + 1;
double secondRowOffset = pitch * Math.Cos(Math.PI * 60 / 180);
if (spanX >= ((punchQtyX - 1) * XSpacing + secondRowOffset + punchingToolList[0].X))
{
marginX = (spanX - ((punchQtyX - 1) * XSpacing) - secondRowOffset) / 2;
}
else
{
marginX = (spanX - ((punchQtyX - 1) * XSpacing)) / 2;
}
int punchQtyY = ((int)((spanY - punchingToolList[0].Y) / YSpacing)) + 1;
double marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX;
double firstY = min.Y + marginY;
// Record the current layer
int currentLayer = doc.Layers.CurrentLayerIndex;
// Create Perforation Layer
// if (punchingToolList[0].ClusterTool.Enable == true)
{
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
}
//else
//{
// if (!MetrixUtilities.IsLayerFound("TemporaryPerfLayer"))
// {
// RhinoUtilities.SetActiveLayer(Properties.Settings.Default.ToolHitLayerName, System.Drawing.Color.Black);
// }
// else
// {
// RhinoUtilities.SetActiveLayer("TemporaryToolHit", System.Drawing.Color.Black);
// }
//}
int rightSide = 0;
bool hasSlot = false;
int slotPercentage = 0;
int slotQty;
for (int y = 0; y < punchQtyY; y++)
{
if (y % 3 == 1)
{
hasSlot = true;
slotPercentage = random.Next(10, 105);
if (slotPercentage > 100)
{
slotPercentage = 100;
}
rightSide++;
if (rightSide > 2)
{
rightSide = 0;
}
}
else
{
hasSlot = false;
}
if (y % 2 == 0) // even rows
{
// Slot propagate from the left
if (hasSlot == true && rightSide < 2)
{
slotQty = (int)(slotPercentage * punchQtyX / 100);
int x;
for (x = 1; x < slotQty; x += 3)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[1].isInside(boundaryCurve, point) == true)
{
pointMapList[1].AddPoint(new PunchingPoint(point));
punchingToolList[1].drawTool(point);
}
}
if (slotQty == punchQtyX && slotQty % 3 != 0)
{
x = punchQtyX - (punchQtyX % 3) + 1;
}
for (x = x - 1; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMapList[0].AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
}
else if (hasSlot == true && rightSide == 2)
{
slotQty = (int)(slotPercentage * punchQtyX / 100);
int x;
int holeQty = punchQtyX - slotQty;
holeQty = (int)(holeQty / 3) * 3;
for (x = 0; x < holeQty; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMapList[0].AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
for (x = x + 1; x < punchQtyX; x += 3)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[1].isInside(boundaryCurve, point) == true)
{
pointMapList[1].AddPoint(new PunchingPoint(point));
punchingToolList[1].drawTool(point);
}
}
if (punchQtyX % 3 != 0)
{
x = punchQtyX - (punchQtyX % 3);
}
for (; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMapList[0].AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
}
else
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMapList[0].AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
}
}
else // odd rows
{
// Slot propagate from the left
if (hasSlot == true && rightSide < 2)
{
slotQty = (int)(slotPercentage * punchQtyX / 100);
int x;
for (x = 1; x < slotQty; x += 3)
{
point = new Point3d(firstX + secondRowOffset + (x * XSpacing), firstY + y * YSpacing, 0);
if (punchingToolList[1].isInside(boundaryCurve, point) == true)
{
pointMapList[1].AddPoint(new PunchingPoint(point));
punchingToolList[1].drawTool(point);
}
}
if (slotQty == punchQtyX && slotQty % 3 != 0)
{
x = punchQtyX - (punchQtyX % 3) + 1;
}
for (x = x - 1; x < punchQtyX; x++)
{
point = new Point3d(firstX + secondRowOffset + (x * XSpacing), firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMapList[0].AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
}
else if (hasSlot == true && rightSide == 2)
{
slotQty = (int)(slotPercentage * punchQtyX / 100);
int x;
int holeQty = punchQtyX - slotQty;
holeQty = (int)(holeQty / 3) * 3;
for (x = 0; x < holeQty; x++)
{
point = new Point3d(firstX + secondRowOffset + (x * XSpacing), firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMapList[0].AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
for (x = x + 1; x < punchQtyX; x += 3)
{
point = new Point3d(firstX + secondRowOffset + (x * XSpacing), firstY + y * YSpacing, 0);
if (punchingToolList[1].isInside(boundaryCurve, point) == true)
{
pointMapList[1].AddPoint(new PunchingPoint(point));
punchingToolList[1].drawTool(point);
}
}
if (punchQtyX % 3 != 0)
{
x = punchQtyX - (punchQtyX % 3);
}
for (; x < punchQtyX; x++)
{
point = new Point3d(firstX + secondRowOffset + (x * XSpacing), firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMapList[0].AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
}
else
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + secondRowOffset + (x * XSpacing), firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMapList[0].AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
}
}
}
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
double tool1Area = punchingToolList[0].getArea() * pointMapList[0].Count;
RhinoApp.WriteLine("Tool 1 area: {0} mm^2", tool1Area.ToString("#.##"));
double tool2Area = punchingToolList[1].getArea() * pointMapList[1].Count;
RhinoApp.WriteLine("Tool 2 area: {0} mm^2", tool2Area.ToString("#.##"));
openArea = (tool1Area + tool2Area) * 100 / area.Area;
RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
// Draw the cluster for each tool
for (int i = 0; i < punchingToolList.Count; i++)
{
// Only draw cluster tool if it is enable
if (punchingToolList[i].ClusterTool.Enable == true)
{
// Draw the cluster tool
drawCluster(pointMapList[i], punchingToolList[i]);
}
}
doc.Views.Redraw();
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(openArea);
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
PointMap pointMap = new PointMap();
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
int punchQtyX = ((int)((spanX - punchingToolList[0].X) / XSpacing)) + 1;
double marginX = (spanX - ((punchQtyX - 1) * XSpacing)) / 2;
int punchQtyY = ((int)((spanY - punchingToolList[0].Y) / YSpacing)) + 1;
double marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX;
double firstY = min.Y + marginY;
Point3d origin = new Point3d(firstX, firstY, 0);
int currentLayer = doc.Layers.CurrentLayerIndex;
// Create the grid
Point3d?[,] grid = new Point3d?[punchQtyX, punchQtyY];
// Active points
List <Point3d> activePointsList = new List <Point3d>();
// Point list
List <Point3d> pointsList = new List <Point3d>();
//doc.Layers.SetCurrentLayerIndex(layerIndex, true);
// Add first point
random = new Random();
for (int y = 0; y < punchQtyY; y++)
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
if (!grid[x, y].HasValue)
{
pointMap.AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
}
}
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
double toolArea = punchingToolList[0].getArea() * pointMap.Count;
RhinoApp.WriteLine("Tool area: {0} mm^2", toolArea.ToString("#.##"));
openArea = toolArea * 100 / area.Area;
RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
// Draw the cluster for each tool
for (int i = 0; i < punchingToolList.Count; i++)
{
// Only draw cluster tool if it is enable
if (punchingToolList[i].ClusterTool.Enable == true)
{
// Draw the cluster tool
drawCluster(pointMap, punchingToolList[i]);
}
}
doc.Views.Redraw();
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(openArea);
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
PointMap pointMap = new PointMap();
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
int punchQtyX = ((int)((spanX - punchingToolList[1].X) / XSpacing)) + 1;
double marginX = (spanX - ((punchQtyX - 1) * XSpacing)) / 2;
double YSpacing = XSpacing;
int punchQtyY = ((int)((spanY - punchingToolList[1].Y) / YSpacing)) + 1;
double marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX;
double firstY = min.Y + marginY;
// Record current layer
int currentLayer = doc.Layers.CurrentLayerIndex;
int tool0Count = 0;
for (int y = 0; y < punchQtyY; y++)
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
pointMap.AddPoint(new PunchingPoint(point));
// punchingToolList[0].drawTool(point);
tool0Count++;
}
else
{
punchingToolList[0].drawTool(point);
}
}
}
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
double tool0Area = punchingToolList[0].getArea() * tool0Count;
RhinoApp.WriteLine("Tool 1 area: {0} mm^2", tool0Area.ToString("#.##"));
//double tool1Area = punchingToolList[1].getArea() * tool1Count;
//RhinoApp.WriteLine("Tool 2 area: {0} mm^2", tool1Area.ToString("#.##"));
//double openArea = (tool0Area + tool1Area) * 100 / area.Area;
// RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
doc.Views.Redraw();
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(0);
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
PointMap pointMap = new PointMap();
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
double d = Math.Tan(Math.PI / 6) * (XSpacing - punchingToolList[0].X) / 2;
double rowHeight = (Math.Sqrt(3) * punchingToolList[0].X / 2) + d;
double h = (Math.Sqrt(3) * punchingToolList[0].X / 2);
double g = d / Math.Sin(Math.PI / 6);
YSpacing = rowHeight + g;
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
int punchQtyX = ((int)((spanX - punchingToolList[0].X) / (XSpacing / 2))) + 1;
double marginX = (spanX - ((punchQtyX - 1) * (XSpacing / 2))) / 2;
int punchQtyY = ((int)((spanY - rowHeight) / YSpacing)) + 1;
double marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX;
double firstY = min.Y + marginY;
Point3d origin = new Point3d(firstX, firstY, 0);
// Record the current layer
int currentLayer = doc.Layers.CurrentLayerIndex;
// Create Perforation Layer
// if (punchingToolList[0].ClusterTool.Enable == true)
{
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
}
//else
//{
// if (!MetrixUtilities.IsLayerFound("TemporaryPerfLayer"))
// {
// RhinoUtilities.SetActiveLayer(Properties.Settings.Default.ToolHitLayerName, System.Drawing.Color.Black);
// }
// else
// {
// RhinoUtilities.SetActiveLayer("TemporaryToolHit", System.Drawing.Color.Black);
// }
//}
for (int y = 0; y < punchQtyY; y++)
{
if (y % 2 == 0) // even rows
{
for (int x = 0; x < punchQtyX; x++)
{
if (x % 2 == 0) // even location
{
point = new Point3d(firstX + x * (XSpacing / 2), firstY + y * YSpacing - (rowHeight / 2) + (h / 3), 0);
if (punchingToolList[0].isInside(boundaryCurve, point, 0) == true)
{
pointMap.AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point, 0);
}
}
else
{
point = new Point3d(firstX + x * (XSpacing / 2), firstY + y * YSpacing + (rowHeight / 2) - (h / 3), 0);
if (punchingToolList[0].isInside(boundaryCurve, point, Math.PI) == true)
{
pointMap.AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point, Math.PI);
}
}
}
}
else
{
for (int x = 0; x < punchQtyX; x++)
{
if (x % 2 == 0) // even location
{
point = new Point3d(firstX + x * (XSpacing / 2), firstY + y * YSpacing + (rowHeight / 2) - (h / 3), 0);
if (punchingToolList[0].isInside(boundaryCurve, point, Math.PI) == true)
{
pointMap.AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point, Math.PI);
}
}
else
{
point = new Point3d(firstX + x * (XSpacing / 2), firstY + y * YSpacing - (rowHeight / 2) + (h / 3), 0);
if (punchingToolList[0].isInside(boundaryCurve, point, 0) == true)
{
pointMap.AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point, 0);
}
}
}
}
}
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
double toolArea = punchingToolList[0].getArea() * pointMap.Count;
RhinoApp.WriteLine("Tool area: {0} mm^2", toolArea.ToString("#.##"));
openArea = toolArea * 100 / area.Area;
RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
// Draw the cluster for each tool
for (int i = 0; i < punchingToolList.Count; i++)
{
// Only draw cluster tool if it is enable
if (punchingToolList[i].ClusterTool.Enable == true)
{
// Draw the cluster tool
drawCluster(pointMap, punchingToolList[i]);
}
}
doc.Views.Redraw();
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(openArea);
}
void OnGUI()
{
#region GENERATING NEW LEVEL
EditorGUILayout.LabelField("Generate New Level", EditorStyles.boldLabel);
pointPrefab = (GeneratedPoint)EditorGUILayout.ObjectField(pointPrefab, typeof(GeneratedPoint), false);
if (GUILayout.Button("New Level"))
{
if (initialPoint != null)
{
DestroyImmediate(initialPoint);
}
if (pointPrefab != null)
{
initialPoint = Instantiate(pointPrefab);
}
}
#endregion
DrawUILine(Color.black, 1, 25);
#region GENERATING NEW POINT
EditorGUILayout.LabelField("Add New Point", EditorStyles.boldLabel);
if (GUILayout.Button("New Point"))
{
GameObject[] selectedObjects = UnityEditor.Selection.gameObjects;
GeneratedPoint focusPoint;
foreach (GameObject selectedObject in selectedObjects)
{
if (selectedObject.GetComponent <GeneratedPoint>())
{
GeneratedPoint newPoint = Instantiate(pointPrefab);
newPoint.transform.parent = selectedObject.transform;
newPoint.parentPoint = selectedObject;
break;
}
}
}
#endregion
DrawUILine(Color.black, 1, 25);
#region LOADING NEW LEVEL
EditorGUILayout.LabelField("Load Existing Level", EditorStyles.boldLabel);
loadingPointMap = (PointMap)EditorGUILayout.ObjectField(loadingPointMap, typeof(PointMap), true);
if (GUILayout.Button("Load Level"))
{
//clear current level
if (initialPoint != null)
{
Destroy(initialPoint);
}
if (loadingPointMap != null)
{
initialPoint = Instantiate(pointPrefab);
initialPoint.transform.position = loadingPointMap.points[0];
Transform previousPoint = initialPoint.transform;
foreach (Vector2 pointLocation in loadingPointMap.points)
{
var nextPoint = Instantiate(pointPrefab);
nextPoint.transform.position = pointLocation;
nextPoint.transform.parent = previousPoint;
nextPoint.parentPoint = previousPoint.gameObject;
previousPoint = nextPoint.transform;
}
}
}
#endregion
DrawUILine(Color.black, 1, 25);
#region SAVING GENERATED MAP AS SCRIPTABLE OBJECT
EditorGUILayout.LabelField("Save Level", EditorStyles.boldLabel);
fileName = GUILayout.TextField(fileName);
if (fileName == "")
{
fileName = "newPointMap";
}
if (GUILayout.Button("Save Point Map"))
{
SaveLevelData();
}
#endregion
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
PointMap pointMap = new PointMap();
Random random = new Random();
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
int punchQtyX = ((int)((spanX - punchingToolList[0].X) / XSpacing)) + 1;
double marginX = (spanX - ((punchQtyX - 1) * XSpacing)) / 2;
double YSpacing = XSpacing;
int punchQtyY = ((int)((spanY - punchingToolList[0].Y) / YSpacing)) + 1;
double marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX;
double firstY = min.Y + marginY;
// Record the current layer
int currentLayer = doc.Layers.CurrentLayerIndex;
// Create Perforation Layer
// if (punchingToolList[0].ClusterTool.Enable == true)
{
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
//RhinoUtilities.SetActiveLayer(Properties.Settings.Default.PerforationLayerName, System.Drawing.Color.Green);
}
//else
//{
// if (MetrixUtilities.IsLayerFound("TemporaryPerfLayer"))
// {
// RhinoUtilities.SetActiveLayer("TemporaryToolHit", System.Drawing.Color.Black);
// }
// else
// {
// RhinoUtilities.SetActiveLayer(Properties.Settings.Default.ToolHitLayerName, System.Drawing.Color.Black);
// }
//}
for (int y = 0; y < punchQtyY; y++)
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
if (random.NextDouble() < randomness)
{
pointMap.AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
}
}
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
double toolArea = punchingToolList[0].getArea() * pointMap.Count;
RhinoApp.WriteLine("Tool area: {0} mm^2", toolArea.ToString("#.##"));
openArea = toolArea * 100 / area.Area;
RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
// Draw the cluster for each tool
for (int i = 0; i < punchingToolList.Count; i++)
{
// Only draw cluster tool if it is enable
if (punchingToolList[i].ClusterTool.Enable == true)
{
// Draw the cluster tool
drawCluster(pointMap, punchingToolList[i]);
}
}
doc.Views.Redraw();
// Set the active layer back to where it was
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(openArea);
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <param name="boundaryCurve">The boundary curve.</param>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
List <PointMap> pointMapList = new List <PointMap>();
Random random = new Random();
PointMap pointMapTool1 = new PointMap();
int tool0count = 0;
int tool1count = 0;
int tool2count = 0;
double marginX;
pointMapList.Add(pointMapTool1);
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
double gap = xSpacing - punchingToolList[2].X;
// Maximum punching qty
int punchQtyX = ((int)((spanX - punchingToolList[2].X) / XSpacing)) + 1;
// PunchQty need to add 1 if the last bit can fit the small rectangle
if (spanX - (punchingToolList[2].X * punchQtyX) > (punchingToolList[0].X + gap))
{
punchQtyX = punchQtyX + 1;
}
// Find the location of the first punch
if (spanX >= ((punchQtyX - 1) * XSpacing + punchingToolList[2].X))
{
marginX = (spanX - ((punchQtyX - 2) * XSpacing) - (punchingToolList[2].X) - gap) / 2;
}
else if (spanX >= ((punchQtyX - 1) * XSpacing + punchingToolList[1].X))
{
marginX = (spanX - ((punchQtyX - 2) * XSpacing) - (punchingToolList[1].X) - gap) / 2;
}
else
{
marginX = (spanX - ((punchQtyX - 2) * XSpacing) - (punchingToolList[0].X) - gap) / 2;
}
int punchQtyY = ((int)((spanY - punchingToolList[0].Y) / YSpacing)) + 1;
double marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX;
double firstY = min.Y + marginY;
// Record the current layer
int currentLayer = doc.Layers.CurrentLayerIndex;
// Create Perforation Layer
//if (punchingToolList[0].ClusterTool.Enable == true)
{
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
}
//else
//{
// if (!MetrixUtilities.IsLayerFound("TemporaryPerfLayer"))
// {
// RhinoUtilities.SetActiveLayer(Properties.Settings.Default.ToolHitLayerName, System.Drawing.Color.Black);
// }
// else
// {
// RhinoUtilities.SetActiveLayer("TemporaryToolHit", System.Drawing.Color.Black);
// }
//}
// Random Engine
RandomTiler randomTileEngine = new RandomTiler();
int totalQty = (punchQtyX + 1) * punchQtyY;
int toolHitQty = (int)(totalQty * randomness);
int blankQty = totalQty - toolHitQty;
List <int> tileCounts = new List <int>();
tileCounts.Add(toolHitQty);
tileCounts.Add(blankQty);
int[,] tileMap = randomTileEngine.GetTileMap(tileCounts, punchQtyX + 1, punchQtyY);
Point3d pointMedL;
Point3d pointMedR;
Point3d pointShortL;
Point3d pointShortR;
Point3d pointLeft, pointRight, pointTop, pointBottom;
double toolOffset = XSpacing / 6;
double rowOffset = XSpacing / 3;
for (int y = 0; y < punchQtyY; y++)
{
if (y % 3 == 0) // Long tool row
{
// first X
firstX = min.X + marginX;
}
else if (y % 3 == 1) // Med tool row
{
firstX = min.X + marginX - rowOffset;
}
else // short tool rows
{
firstX = min.X + marginX - (2 * rowOffset);
}
bool isBorderPunch = false;
for (int x = 0; x < punchQtyX + 1; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
pointMedL = new Point3d(firstX + x * XSpacing - toolOffset, firstY + y * YSpacing, 0);
pointMedR = new Point3d(firstX + x * XSpacing + toolOffset, firstY + y * YSpacing, 0);
pointShortL = new Point3d(firstX + x * XSpacing - 2 * toolOffset, firstY + y * YSpacing, 0);
pointShortR = new Point3d(firstX + x * XSpacing + 2 * toolOffset, firstY + y * YSpacing, 0);
pointLeft = new Point3d(firstX + (x - 1) * XSpacing, firstY + y * YSpacing, 0);
pointRight = new Point3d(firstX + (x + 1) * XSpacing, firstY + y * YSpacing, 0);
pointTop = new Point3d(firstX + x * XSpacing, firstY + (y + 1) * YSpacing, 0);
pointBottom = new Point3d(firstX + (x + 1) * XSpacing, firstY + (y - 1) * YSpacing, 0);
// Test if the current punch is close to border
isBorderPunch = false;
if (punchingToolList[0].isInside(boundaryCurve, pointLeft) == false)
{
isBorderPunch = true;
}
if (punchingToolList[0].isInside(boundaryCurve, pointRight) == false)
{
isBorderPunch = true;
}
if (punchingToolList[0].isInside(boundaryCurve, pointTop) == false)
{
isBorderPunch = true;
}
if (punchingToolList[0].isInside(boundaryCurve, pointBottom) == false)
{
isBorderPunch = true;
}
if (isBorderPunch == true || tileMap[x, y] == 1)
{
if (punchingToolList[2].isInside(boundaryCurve, point) == true)
{
pointMapTool1.AddPoint(new PunchingPoint(point));
punchingToolList[2].drawTool(point);
tool2count++;
}
else if (punchingToolList[1].isInside(boundaryCurve, pointMedL) == true)
{
pointMapTool1.AddPoint(new PunchingPoint(pointMedL));
punchingToolList[1].drawTool(pointMedL);
tool1count++;
}
else if (punchingToolList[1].isInside(boundaryCurve, pointMedR) == true)
{
pointMapTool1.AddPoint(new PunchingPoint(pointMedR));
punchingToolList[1].drawTool(pointMedR);
tool1count++;
}
else if (punchingToolList[0].isInside(boundaryCurve, pointShortL) == true)
{
pointMapTool1.AddPoint(new PunchingPoint(pointShortL));
punchingToolList[0].drawTool(pointShortL);
tool0count++;
}
else if (punchingToolList[0].isInside(boundaryCurve, pointShortR) == true)
{
pointMapTool1.AddPoint(new PunchingPoint(pointShortR));
punchingToolList[0].drawTool(pointShortR);
tool0count++;
}
}
}
}
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
double tool0Area = punchingToolList[0].getArea() * tool0count;
double tool1Area = punchingToolList[1].getArea() * tool1count;
double tool2Area = punchingToolList[2].getArea() * tool2count;
RhinoApp.WriteLine("Tool 1 area: {0} mm^2", tool0Area.ToString("#.##"));
RhinoApp.WriteLine("Tool 2 area: {0} mm^2", tool1Area.ToString("#.##"));
RhinoApp.WriteLine("Tool 3 area: {0} mm^2", tool2Area.ToString("#.##"));
openArea = (tool0Area + tool1Area + tool2Area) * 100 / area.Area;
RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
// Draw the cluster for each tool
for (int i = 0; i < punchingToolList.Count; i++)
{
// Only draw cluster tool if it is enable
if (punchingToolList[i].ClusterTool.Enable == true)
{
// Draw the cluster tool
drawCluster(pointMapList[i], punchingToolList[i]);
}
}
doc.Views.Redraw();
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(openArea);
}
public void SetPointMap(PointMap pM)
{
maps = pM;
}
/// <summary>
/// Draws the perforation.
/// </summary>
/// <returns></returns>
public override double drawPerforation(Curve boundaryCurve)
{
List <PointMap> pointMapList = new List <PointMap>();
Random random = new Random();
PointMap pointMapTool1 = new PointMap();
PointMap pointMapTool2 = new PointMap();
pointMapList.Add(pointMapTool1);
// Find the boundary
BoundingBox boundingBox = boundaryCurve.GetBoundingBox(Plane.WorldXY);
Point3d min = boundingBox.Min;
Point3d max = boundingBox.Max;
// Span are the total length of the area
double spanX = max.X - min.X;
double spanY = max.Y - min.Y;
// Number of holes that can be punch in X.
int punchQtyX = ((int)((spanX - punchingToolList[0].X) / XSpacing)) + 1;
double secondRowOffset = XSpacing / 2;
// Calculate the margin - is the distance from the left border
double marginX;
if (spanX >= ((punchQtyX - 1) * XSpacing + secondRowOffset + (punchingToolList[0].X / 2) + (punchingToolList[2].X / 2)))
{
marginX = (spanX - ((punchQtyX - 1) * XSpacing) - secondRowOffset - ((punchingToolList[0].X / 2) + (punchingToolList[2].X / 2))) / 2 + (punchingToolList[0].X / 2);
}
else
{
marginX = (spanX - ((punchQtyX - 1) * XSpacing)) / 2;
}
int punchQtyY = ((int)((spanY - punchingToolList[0].Y) / YSpacing)) + 1;
double marginY = 0;
if (punchQtyY % 2 == 0) // Even
{
// Make sure the Tool can fit if the row is even row
punchQtyY = ((int)((spanY - (punchingToolList[0].Y / 2) - (punchingToolList[2].Y / 2)) / YSpacing)) + 1;
}
if (punchQtyY % 2 == 0) // Even Row
{
marginY = (spanY - ((punchQtyY - 1) * YSpacing) - (punchingToolList[0].Y / 2) - (punchingToolList[2].Y / 2)) / 2 + (punchingToolList[0].Y / 2);
}
else
{
marginY = (spanY - ((punchQtyY - 1) * YSpacing)) / 2;
}
Point3d point;
RhinoDoc doc = RhinoDoc.ActiveDoc;
double firstX = min.X + marginX;
double firstY = min.Y + marginY;
// Record the current layer
int currentLayer = doc.Layers.CurrentLayerIndex;
// Create Perforation Layer
// if (punchingToolList[0].ClusterTool.Enable == true)
{
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
}
//else
//{
// if (!MetrixUtilities.IsLayerFound("TemporaryPerfLayer"))
// {
// RhinoUtilities.SetActiveLayer(Properties.Settings.Default.ToolHitLayerName, System.Drawing.Color.Black);
// }
// else
// {
// RhinoUtilities.SetActiveLayer("TemporaryToolHit", System.Drawing.Color.Black);
// }
//}
for (int y = 0; y < punchQtyY; y++)
{
if (y % 2 == 0) // even rows
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + x * XSpacing, firstY + y * YSpacing, 0);
if (punchingToolList[0].isInside(boundaryCurve, point) == true)
{
if (random.NextDouble() < randomness)
{
pointMapTool1.AddPoint(new PunchingPoint(point));
punchingToolList[0].drawTool(point);
}
}
}
}
else // odd rows
{
for (int x = 0; x < punchQtyX; x++)
{
point = new Point3d(firstX + (x * XSpacing) + secondRowOffset, firstY + y * YSpacing, 0);
if (punchingToolList[2].isInside(boundaryCurve, point) == true)
{
if (random.NextDouble() < randomness)
{
pointMapTool2.AddPoint(new PunchingPoint(point));
punchingToolList[1].drawTool(point);
punchingToolList[2].drawTool(point);
}
}
}
}
}
// Display the open area calculation
AreaMassProperties area = AreaMassProperties.Compute(boundaryCurve);
RhinoApp.WriteLine("Total area: {0} mm^2", area.Area.ToString("#.##"));
double tool1Area = punchingToolList[0].getArea() * pointMapTool1.Count;
RhinoApp.WriteLine("Tool 1 area: {0} mm^2", tool1Area.ToString("#.##"));
double tool2Area = punchingToolList[1].getArea() * pointMapTool2.Count;
RhinoApp.WriteLine("Tool 2 area: {0} mm^2", tool2Area.ToString("#.##"));
openArea = (tool1Area + tool2Area) * 100 / area.Area;
RhinoApp.WriteLine("Open area: {0}%", openArea.ToString("#."));
doc.Views.Redraw();
// Draw the cluster for each tool
for (int i = 0; i < punchingToolList.Count; i++)
{
// Only draw cluster tool if it is enable
if (punchingToolList[i].ClusterTool.Enable == true)
{
// Draw the cluster tool
drawCluster(pointMapList[i], punchingToolList[i]);
}
}
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(openArea);
}
// Update is called once per frame
void Update()
{
float rotateHorizontal = Input.GetAxis("Horizontal");
float moveFrontBack = Input.GetAxis("Vertical");
transform.Translate(0.0f, 0.0f, moveFrontBack);
transform.Rotate(0.0f, rotateHorizontal, 0.0f);
var moveRight = Input.GetKey(KeyCode.Y); //Y.
if (moveRight)
{
transform.Translate(20f, 0.0f, 0.0f);
}
var moveLeft = Input.GetKey(KeyCode.R); //T
if (moveLeft)
{
transform.Translate(-20f, 0.0f, 0.0f);
}
var moveUp = Input.GetKey(KeyCode.PageUp);
if (moveUp)
{
transform.Translate(0.0f, 20f, 0.0f);
}
var moveDown = Input.GetKey(KeyCode.PageDown);
if (moveDown)
{
transform.Translate(0.0f, -20f, 0.0f);
}
var rotateHeadingRight = Input.GetKey(KeyCode.H);
if (rotateHeadingRight)
{
transform.Rotate(0.0f, 1f, 0.0f);
}
var rotateHeadingLeft = Input.GetKey(KeyCode.F); //G
if (rotateHeadingLeft)
{
transform.Rotate(0.0f, -1f, 0.0f);
}
var rotatePitchDown = Input.GetKey(KeyCode.G); //O
if (rotatePitchDown)
{
transform.Rotate(1f, 0.0f, 0.0f);
}
var rotatePitchUp = Input.GetKey(KeyCode.T); //P
if (rotatePitchUp)
{
transform.Rotate(-1f, 0.0f, 0.0f);
}
var rotateRollLeft = Input.GetKey(KeyCode.O); //E
if (rotateRollLeft)
{
transform.Rotate(0.0f, 0.0f, 0.5f);
}
var rotateRollRight = Input.GetKey(KeyCode.P); //R
if (rotateRollRight)
{
transform.Rotate(0.0f, 0.0f, -0.5f);
}
var mousePosition = Input.mousePosition;
Vector3 point = new Vector3();
point = Camera.main.ScreenToWorldPoint(new Vector3(mousePosition.x, mousePosition.y, Camera.main.nearClipPlane));
// begin.transform.position = point ;
var informationRequired = Input.GetKeyDown(KeyCode.F1);
if (informationRequired)
{
print("informationRequired at " + point);
RaycastHit hit;
if (Physics.Raycast(transform.position, point - transform.position, out hit, Mathf.Infinity))
{
Debug.Log("Did Hit");
Debug.Log("Target Position: " + hit.collider.gameObject.transform.position);
Debug.Log("Hit point : " + hit.point);
PointMap pointMap = hit.collider.gameObject.GetComponentInParent <PointMap> ();
if (pointMap != null)
{
SphereCollider sc = pointMap.GetComponent <SphereCollider> ();
sc.enabled = false;
if (Physics.Raycast(transform.position, point - transform.position, out hit, Mathf.Infinity))
{
Debug.Log("Did Hit again");
Debug.Log("Target Position: " + hit.collider.gameObject.transform.position);
Debug.Log("Hit point : " + hit.point);
Debug.Log("Hit triangle index : " + hit.triangleIndex);
pointMap = hit.collider.gameObject.GetComponentInParent <PointMap> ();
if (pointMap != null)
{
print(pointMap.GetProperty(hit.triangleIndex));
}
else
{
Debug.Log("Did not Hit this time");
}
}
else
{
Debug.Log("But not on a PointMap");
}
sc.enabled = true;
}
}
else
{
Debug.Log("Did not Hit");
}
}
}
public Map(string MapID)
{
var stopwatch = new System.Diagnostics.Stopwatch();
stopwatch.Start();
Console.WriteLine("Initializing Map: {0}", MapID);
this.MapID = MapID;
var mapData = (JObject)(Loader.data.geometry)[MapID];
var mapDef = (JObject)(Loader.data.maps)[MapID];
if (mapData != null)
{
var MinX = (int)(((dynamic)mapData["min_x"]) ?? -1000);
var MinY = (int)(((dynamic)mapData["min_y"]) ?? -1000);
var MaxX = (int)(((dynamic)mapData["max_x"]) ?? 1000);
var MaxY = (int)(((dynamic)mapData["max_y"]) ?? 1000);
if ((dynamic)mapDef["no_bounds"] == true)
{
MinX = -1000;
MaxX = 1000;
MinY = -1000;
MaxY = 1000;
}
Width = Math.Abs(MaxX) + Math.Abs(MinX);
Height = Math.Abs(MaxY) + Math.Abs(MinY);
OffsetX = Math.Abs(MinX);
OffsetY = Math.Abs(MinY);
List <Line> lines = new List <Line>();
if (mapData.Properties().Where(p => p.Name == "x_lines").FirstOrDefault() != null)
{
foreach (var xLine in mapData["x_lines"])
{
var line = new Line(new Point((int)xLine[0], (int)xLine[1]), new Point((int)xLine[0], (int)xLine[2]));
if (line.Points.Length > 1)
{
lines.Add(line);
}
}
}
if (mapData.Properties().Where(p => p.Name == "y_lines").FirstOrDefault() != null)
{
foreach (var yLine in mapData["y_lines"])
{
var line = new Line(new Point((int)yLine[1], (int)yLine[0]), new Point((int)yLine[2], (int)yLine[0]));
if (line.Points.Length > 1)
{
lines.Add(line);
}
}
}
PointMap = new PointMap(Width, Height, OffsetX, OffsetY);
int xBufferMin = 9;
int xBufferMax = 9;
int yBufferMin = 4;
int yBufferMax = 8;
foreach (var line in lines)
{
PointMap.DrawWall(line, xBufferMin, xBufferMax, yBufferMin, yBufferMax);
}
var spawns = ((JObject)(Loader.data.maps))[MapID]["spawns"];
List <Point> spawnPoints = new List <Point>();
foreach (var spawn in spawns)
{
var spawnPoint = new Point((int)spawn[0], (int)spawn[1]);
spawnPoints.Add(spawnPoint);
}
PointMap.FillInterior(spawnPoints);
PointMap.FillExterior();
var p1 = new Point(MinX, MinY);
var p2 = new Point(MinX, MaxY);
var p3 = new Point(MaxX, MaxY);
var p4 = new Point(MaxX, MinY);
PointMap.DrawWall(new Line(p1, p2), xBufferMin, xBufferMax, yBufferMin, yBufferMax);
PointMap.DrawWall(new Line(p2, p3), xBufferMin, xBufferMax, yBufferMin, yBufferMax);
PointMap.DrawWall(new Line(p3, p4), xBufferMin, xBufferMax, yBufferMin, yBufferMax);
PointMap.DrawWall(new Line(p4, p1), xBufferMin, xBufferMax, yBufferMin, yBufferMax);
System.Diagnostics.Stopwatch timer = new System.Diagnostics.Stopwatch();
poly = PointMap.BuildPolygon();
Mesh = BuildMesh();
this.edges = PointMap.GetEdges();
PointMap.FillMeshEdges(Mesh);
graph = new MapGraph(Mesh, PointMap, OffsetX, OffsetY);
GetMapConnections();
stopwatch.Stop();
Console.WriteLine("Initialized Map: {0} in {1}ms", MapID, stopwatch.ElapsedMilliseconds);
}
else
{
throw new Exception("Map Doesn't Exist.");
}
}
public static void DrawBitmap(FastBitmap oTexture, Point topLeft, Point topRight, Point bottomRight, Point bottomLeft, FastBitmap oCanvas)
{
//top line
float nDeltaX = topRight.X - topLeft.X;
float nDeltaY = topRight.Y - topLeft.Y;
float nNumOfPixels = Math.Max(Math.Abs(nDeltaX), Math.Abs(nDeltaY));
//nNumOfPixels *= 2;
float nIncrementX = nDeltaX / nNumOfPixels;
float nIncrementY = nDeltaY / nNumOfPixels;
FastPointF oPixel = new FastPointF(topLeft.X, topLeft.Y);
float nTextureIncrementX = (oTexture.Width / (nNumOfPixels + 1));
float nTextureX = 0;
PointMap[] oTopLine = new PointMap[(int)(nNumOfPixels + 1)];
for (int nCurrentPixel = 0; nCurrentPixel <= nNumOfPixels; nCurrentPixel++)
{
oTopLine[nCurrentPixel] = new PointMap(new FastPointF(nTextureX, 0), oPixel);
nTextureX += nTextureIncrementX;
oPixel.X += nIncrementX;
oPixel.Y += nIncrementY;
}
//bottom line
nDeltaX = bottomRight.X - bottomLeft.X;
nDeltaY = bottomRight.Y - bottomLeft.Y;
nNumOfPixels = Math.Max(Math.Abs(nDeltaX), Math.Abs(nDeltaY));
//nNumOfPixels *= 2;
nIncrementX = nDeltaX / nNumOfPixels;
nIncrementY = nDeltaY / nNumOfPixels;
oPixel = new FastPointF(bottomLeft.X, bottomLeft.Y);
nTextureIncrementX = (oTexture.Width / (nNumOfPixels + 1));
nTextureX = 0;
PointMap[] oBottomLine = new PointMap[(int)(nNumOfPixels + 1)];
for (int nCurrentPixel = 0; nCurrentPixel <= nNumOfPixels; nCurrentPixel++)
{
oBottomLine[nCurrentPixel] = new PointMap(new FastPointF(nTextureX, oTexture.Height - 1), oPixel);
oPixel.X += nIncrementX;
oPixel.Y += nIncrementY;
nTextureX += nTextureIncrementX;
}
//cross lines
PointMap[] oStartLine = oTopLine.Length > oBottomLine.Length ? oTopLine : oBottomLine;
PointMap[] oEndLine = oTopLine.Length > oBottomLine.Length ? oBottomLine : oTopLine;
float nFactor = (float)oEndLine.Length / (float)oStartLine.Length;
Rectangle oBox = _ComputeBox(topLeft, topRight, bottomLeft, bottomRight);
Boolean[,] oPainted = new Boolean[oBox.Width + 1, oBox.Height + 1];
for (int s = 0; s < oStartLine.Length; s++)
{
FastPointF oStart = oStartLine[s].To;
FastPointF oStartTexture = oStartLine[s].From;
float nEndPoint = (float)Math.Floor(nFactor * s);
FastPointF oEnd = oEndLine[(int)nEndPoint].To;
FastPointF oEndTexture = oEndLine[(int)nEndPoint].From;
nDeltaX = oEnd.X - oStart.X;
nDeltaY = oEnd.Y - oStart.Y;
nNumOfPixels = Math.Max(Math.Abs(nDeltaX), Math.Abs(nDeltaY));
//nNumOfPixels *= 2;
nIncrementX = nDeltaX / nNumOfPixels;
nIncrementY = nDeltaY / nNumOfPixels;
float nTextureDeltaX = oEndTexture.X - oStartTexture.X;
float nTextureDeltaY = oEndTexture.Y - oStartTexture.Y;
nTextureIncrementX = nTextureDeltaX / (nNumOfPixels + 1);
float nTextureIncrementY = nTextureDeltaY / (nNumOfPixels + 1);
FastPointF oDestination = oStart;
FastPointF oSource = oStartTexture;
for (int nCurrentPixel = 0; nCurrentPixel <= nNumOfPixels; nCurrentPixel++)
{
RGBColor c = oTexture.GetPixel((int)oSource.X, (int)oSource.Y);
oCanvas.SetPixel((int)oDestination.X, (int)oDestination.Y, c);
oPainted[(int)(oDestination.X - oBox.X), (int)(oDestination.Y - oBox.Y)] = true;
oDestination.X += nIncrementX;
oDestination.Y += nIncrementY;
oSource.X += nTextureIncrementX;
oSource.Y += nTextureIncrementY;
}
}
//paint missing pixels
for (int ny = 0; ny < oBox.Height; ny++)
{
for (int nx = 0; nx < oBox.Width; nx++)
{
if (oPainted[nx, ny] == true)
{
continue;
}
int nNeigh = 0;
RGBColor oColor;
int R = 0;
int G = 0;
int B = 0;
if (nx > 0 && oPainted[nx - 1, ny] == true)
{
oColor = oCanvas.GetPixel((nx + oBox.X) - 1, (ny + oBox.Y));
R += oColor.R;
G += oColor.G;
B += oColor.B;
nNeigh++;
}
if (ny > 0 && oPainted[nx, ny - 1] == true)
{
oColor = oCanvas.GetPixel((nx + oBox.X), (ny + oBox.Y) - 1);
R += oColor.R;
G += oColor.G;
B += oColor.B;
nNeigh++;
}
if (nx < oCanvas.Width - 1 && oPainted[nx + 1, ny] == true)
{
oColor = oCanvas.GetPixel((nx + oBox.X) + 1, (ny + oBox.Y));
R += oColor.R;
G += oColor.G;
B += oColor.B;
nNeigh++;
}
if (ny < oCanvas.Height - 1 && oPainted[nx, ny + 1] == true)
{
oColor = oCanvas.GetPixel((nx + oBox.X), (ny + oBox.Y) + 1);
R += oColor.R;
G += oColor.G;
B += oColor.B;
nNeigh++;
}
if (nNeigh == 0)
{
continue;
}
oCanvas.SetPixel((nx + oBox.X), (ny + oBox.Y), new RGBColor((byte)(R / nNeigh), (byte)(G / nNeigh), (byte)(B / nNeigh)));
}
}
}
/// <summary>
/// Draws the cluster.
/// </summary>
/// <param name="pointMap">The point map.</param>
/// <param name="punchingTool">The punching tool.</param>
/// <returns></returns>
public override Result drawCluster(PointMap pointMap, PunchingTool punchingTool)
{
RhinoDoc doc = RhinoDoc.ActiveDoc;
List <PunchingPoint> clusterPoints = new List <PunchingPoint>();
List <Point3d> clusterRelativePoints = new List <Point3d>();
int clusterCounter = 0;
// Create a new layer
string layerName = Properties.Settings.Default.ToolHitLayerName;
// Does a layer with the same name already exist?
int layerIndex = doc.Layers.Find(layerName, true);
// If layer does not exist
if (layerIndex == -1)
{
// Add a new layer to the document
layerIndex = doc.Layers.Add(layerName, System.Drawing.Color.Black);
}
int currentLayer = doc.Layers.CurrentLayerIndex;
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
// Create the cluster tool that has the relative position
for (int y = 0; y < punchingTool.ClusterTool.PinsY; y++)
{
for (int x = 0; x < punchingTool.ClusterTool.PinsX; x++)
{
clusterRelativePoints.Add(new Point3d(x * XSpacing * punchingTool.ClusterTool.MultiplierX, y * YSpacing * punchingTool.ClusterTool.MultiplierY, 0));
}
}
Point2d centre = new Point2d(clusterRelativePoints.Last().X / 2, clusterRelativePoints.Last().Y / 2);
// Go through each point in the point Map list to find cluster tool starting from bottom left corner
for (int i = 0; i < pointMap.YCount; i++)
{
SortedDictionary <int, PunchingPoint> xDict = pointMap.getXDictionary(i);
for (int j = 0; j < xDict.Count; j++)
{
// If the point has already punched, ignore it.
if (xDict.ElementAt(j).Value.HasPunched == true)
{
continue;
}
// Clear the cluster points
clusterPoints.Clear();
// Add the first point to it
clusterPoints.Add(xDict.ElementAt(j).Value);
// Cluster tool X+ Y+ configuration
for (int k = 1; k < clusterRelativePoints.Count; k++)
{
// Look for point in the point list
PunchingPoint resultPoint = pointMap.getPoint2(clusterPoints[0].Point.X + clusterRelativePoints[k].X, clusterPoints[0].Point.Y + clusterRelativePoints[k].Y);
if (resultPoint == null)
{
// Cannot find point in the cluster tool, then skip
break;
}
else
{
clusterPoints.Add(resultPoint);
}
}
// If all the points are added
if (clusterPoints.Count == clusterRelativePoints.Count)
{
double clusterX = centre.X + clusterPoints[0].Point.X;
double clusterY = centre.Y + clusterPoints[0].Point.Y;
// Draw all the points in the cluster tool
clusterCounter++;
if (Properties.Settings.Default.DrawClusterOnSeparateLayer == true)
{
doc.Layers.SetCurrentLayerIndex(CreateLayer("Cluster " + clusterCounter), true);
doc.Views.Redraw();
}
foreach (PunchingPoint pp in clusterPoints)
{
if (Properties.Settings.Default.DrawClusterOnSeparateLayer == true)
{
// Draw the tool
punchingTool.drawTool(pp.Point);
}
// Remove all the points in the clustertool list
pp.HasPunched = true;
}
// Draw the rectangle
punchingTool.ClusterTool.drawClusterTool(clusterX, clusterY, 0);
}
}
}
// If the Cluster tool allow over punch have to do some more work
if (punchingTool.ClusterTool.AllowOverPunch == true)
{
// Bottom right search
// Clear the cluster tool points
clusterRelativePoints.Clear();
// Create the cluster tool that has the relative position
for (int y = 0; y < punchingTool.ClusterTool.PinsY; y++)
{
for (int x = 0; x < punchingTool.ClusterTool.PinsX; x++)
{
clusterRelativePoints.Add(new Point3d(-x * XSpacing * punchingTool.ClusterTool.MultiplierX, y * YSpacing * punchingTool.ClusterTool.MultiplierY, 0));
}
}
// Go through each point in the point Map list to find cluster tool starting from bottom right corner
for (int i = 0; i < pointMap.YCount; i++)
{
SortedDictionary <int, PunchingPoint> xDict = pointMap.getXDictionary(i);
for (int j = xDict.Count - 1; j >= 0; j--)
{
// If the point is punched, skip to the next point
if (xDict.ElementAt(j).Value.HasPunched == true)
{
continue;
}
clusterPoints.Clear();
clusterPoints.Add(xDict.ElementAt(j).Value);
// Cluster tool X- Y+ configuration
for (int k = 1; k < clusterRelativePoints.Count; k++)
{
// Look for point in the point list
PunchingPoint resultPoint = pointMap.getPoint2(clusterPoints[0].Point.X + clusterRelativePoints[k].X, clusterPoints[0].Point.Y + clusterRelativePoints[k].Y);
if (resultPoint == null)
{
// Cannot find point in the cluster tool, then skip
break;
}
else
{
clusterPoints.Add(resultPoint);
}
}
// If all the points are added
if (clusterPoints.Count == clusterRelativePoints.Count)
{
double clusterX = clusterPoints[0].Point.X - centre.X;
double clusterY = clusterPoints[0].Point.Y + centre.Y;
// Draw all the points in the cluster tool
clusterCounter++;
if (Properties.Settings.Default.DrawClusterOnSeparateLayer == true)
{
doc.Layers.SetCurrentLayerIndex(CreateLayer("Cluster " + clusterCounter), true);
}
foreach (PunchingPoint pp in clusterPoints)
{
if (Properties.Settings.Default.DrawClusterOnSeparateLayer == true)
{
// Draw the tool
punchingTool.drawTool(pp.Point);
}
// Remove all the points in the clustertool list
pp.HasPunched = true;
}
// draw the rectangle
punchingTool.ClusterTool.drawClusterTool(clusterX, clusterY, 0);
}
}
}
// Top Left corner search
// Clear the cluster tool points
clusterRelativePoints.Clear();
// Create the cluster tool that has the relative position
for (int y = 0; y < punchingTool.ClusterTool.PinsY; y++)
{
for (int x = 0; x < punchingTool.ClusterTool.PinsX; x++)
{
clusterRelativePoints.Add(new Point3d(x * XSpacing * punchingTool.ClusterTool.MultiplierX, -y * YSpacing * punchingTool.ClusterTool.MultiplierY, 0));
}
}
// Go through each point in the point Map list to find cluster tool starting from top left
for (int i = pointMap.YCount - 1; i >= 0; i--)
{
SortedDictionary <int, PunchingPoint> xDict = pointMap.getXDictionary(i);
for (int j = 0; j < xDict.Count; j++)
{
// If the point is punched, skip to the next point
if (xDict.ElementAt(j).Value.HasPunched == true)
{
continue;
}
clusterPoints.Clear();
clusterPoints.Add(xDict.ElementAt(j).Value);
// Cluster tool X- Y+ configuration
for (int k = 1; k < clusterRelativePoints.Count; k++)
{
// Look for point in the point list
PunchingPoint resultPoint = pointMap.getPoint2(clusterPoints[0].Point.X + clusterRelativePoints[k].X, clusterPoints[0].Point.Y + clusterRelativePoints[k].Y);
if (resultPoint == null)
{
// Cannot find point in the cluster tool, then skip
break;
}
else
{
clusterPoints.Add(resultPoint);
}
}
// If all the points are added
if (clusterPoints.Count == clusterRelativePoints.Count)
{
double clusterX = clusterPoints[0].Point.X + centre.X;
double clusterY = clusterPoints[0].Point.Y - centre.Y;
// Draw all the points in the cluster tool
clusterCounter++;
if (Properties.Settings.Default.DrawClusterOnSeparateLayer == true)
{
doc.Layers.SetCurrentLayerIndex(CreateLayer("Cluster " + clusterCounter), true);
}
foreach (PunchingPoint pp in clusterPoints)
{
if (Properties.Settings.Default.DrawClusterOnSeparateLayer == true)
{
// Draw the tool
punchingTool.drawTool(pp.Point);
}
// Remove all the points in the clustertool list
pp.HasPunched = true;
}
// draw the rectangle
punchingTool.ClusterTool.drawClusterTool(clusterX, clusterY, 0);
}
}
}
// Top right corner search
// Clear the cluster tool points
clusterRelativePoints.Clear();
// Create the cluster tool that has the relative position
for (int y = 0; y < punchingTool.ClusterTool.PinsY; y++)
{
for (int x = 0; x < punchingTool.ClusterTool.PinsX; x++)
{
clusterRelativePoints.Add(new Point3d(-x * XSpacing * punchingTool.ClusterTool.MultiplierX, -y * YSpacing * punchingTool.ClusterTool.MultiplierY, 0));
}
}
centre = new Point2d(-clusterRelativePoints.Last().X / 2, -clusterRelativePoints.Last().Y / 2);
// Go through each point in the point Map list to find cluster tool starting from top right
for (int i = pointMap.YCount - 1; i >= 0; i--)
{
SortedDictionary <int, PunchingPoint> xDict = pointMap.getXDictionary(i);
for (int j = xDict.Count - 1; j >= 0; j--)
{
// If the point is punched, skip to the next point
if (xDict.ElementAt(j).Value.HasPunched == true)
{
continue;
}
clusterPoints.Clear();
clusterPoints.Add(xDict.ElementAt(j).Value);
// Cluster tool X- Y+ configuration
for (int k = 1; k < clusterRelativePoints.Count; k++)
{
// Look for point in the point list
PunchingPoint resultPoint = pointMap.getPoint2(clusterPoints[0].Point.X + clusterRelativePoints[k].X, clusterPoints[0].Point.Y + clusterRelativePoints[k].Y);
if (resultPoint == null)
{
// Cannot find point in the cluster tool, then skip
break;
}
else
{
clusterPoints.Add(resultPoint);
}
}
// If all the points are added
if (clusterPoints.Count == clusterRelativePoints.Count)
{
double clusterX = clusterPoints[0].Point.X - centre.X;
double clusterY = clusterPoints[0].Point.Y - centre.Y;
// Draw all the points in the cluster tool
clusterCounter++;
if (Properties.Settings.Default.DrawClusterOnSeparateLayer == true)
{
doc.Layers.SetCurrentLayerIndex(CreateLayer("Cluster " + clusterCounter), true);
}
foreach (PunchingPoint pp in clusterPoints)
{
if (Properties.Settings.Default.DrawClusterOnSeparateLayer == true)
{
// Draw the tool
punchingTool.drawTool(pp.Point);
}
// Remove all the points in the clustertool list
pp.HasPunched = true;
}
// draw the cluster tool
punchingTool.ClusterTool.drawClusterTool(clusterX, clusterY, 0);
}
}
}
}
doc.Layers.SetCurrentLayerIndex(layerIndex, true);
// Places where cannot cluster punch
for (int i = 0; i < pointMap.YCount; i++)
{
SortedDictionary <int, PunchingPoint> xDict = pointMap.getXDictionary(i);
for (int j = 0; j < xDict.Count; j++)
{
if (xDict.ElementAt(j).Value.HasPunched == false)
{
// Draw the tool
punchingTool.drawTool(xDict.ElementAt(j).Value.Point);
}
}
}
doc.Views.Redraw();
doc.Layers.SetCurrentLayerIndex(currentLayer, true);
return(Result.Success);
}
