///<inheritdoc/>
protected override void SetupHandler()
{
BalloonLayout balloonLayout = new BalloonLayout();
OptionGroup generalGroup = Handler.AddGroup(GENERAL);
generalGroup.AddList(ROOT_NODE_POLICY, enumRoot.Keys, DIRECTED_ROOT);
IOptionItem allowNonTreeItem = generalGroup.AddBool(ALLOW_NON_TREE_EDGES, true);
IOptionItem nonTreeStyleItem = generalGroup.AddList(ROUTING_STYLE_FOR_NON_TREE_EDGES, enumRoute, ROUTE_ORTHOGONAL);
ConstraintManager cm = new ConstraintManager(Handler);
cm.SetEnabledOnValueEquals(allowNonTreeItem, true, nonTreeStyleItem);
IOptionItem ebs = generalGroup.AddDouble(EDGE_BUNDLING_STRENGTH, 0.99, 0, 1);
cm.SetEnabledOnValueEquals(nonTreeStyleItem, ROUTE_BUNDLED, ebs);
generalGroup.AddBool(ACT_ON_SELECTION_ONLY, false);
generalGroup.AddInt(PREFERRED_CHILD_WEDGE, balloonLayout.PreferredChildWedge, 1, 359);
generalGroup.AddInt(PREFERRED_ROOT_WEDGE, balloonLayout.PreferredRootWedge, 1, 360);
generalGroup.AddInt(MINIMAL_EDGE_LENGTH, balloonLayout.MinimumEdgeLength, 10, int.MaxValue);
generalGroup.AddDouble(COMPACTNESS_FACTOR, balloonLayout.CompactnessFactor, 0.1, 0.9);
generalGroup.AddBool(ALLOW_OVERLAPS, balloonLayout.AllowOverlaps);
generalGroup.AddBool(BALLOON_FROM_SKETCH, balloonLayout.FromSketchMode);
generalGroup.AddBool(PLACE_CHILDREN_INTERLEAVED, balloonLayout.InterleavedMode == InterleavedMode.AllNodes);
generalGroup.AddBool(STRAIGHTEN_CHAINS, balloonLayout.ChainStraighteningMode);
OptionGroup labelingGroup = Handler.AddGroup(LABELING);
labelingGroup.AddBool(INTEGRATED_EDGE_LABELING, true);
labelingGroup.AddList(NODE_LABELING_STYLE, nodeLabelingPolicies, nodeLabelingPolicies[3]);
}
///<inheritdoc/>
protected override void SetupHandler()
{
createRouter();
OptionGroup layoutGroup = Handler.AddGroup(GROUP_LAYOUT);
ConstraintManager cm = new ConstraintManager(Handler);
//Layout options
layoutGroup.AddList(SCOPE, new[] { ALL, SUBSET_BUS, SUBSET, PARTIAL }, ALL);
layoutGroup.AddList(BUSES, new[] { SINGLE, LABEL, TAG, CUSTOM }, SINGLE);
IOptionItem gridEnabledItem = layoutGroup.AddBool(GRID_ENABLED, router.GridRouting);
IOptionItem gridSpacingItem = layoutGroup.AddInt(GRID_SPACING, router.GridSpacing, 1, int.MaxValue);
layoutGroup.AddInt(MIN_DISTANCE_TO_NODES, router.MinimumDistanceToNode, 1, int.MaxValue);
layoutGroup.AddInt(MIN_DISTANCE_TO_EDGES, router.MinimumDistanceToEdge, 1, int.MaxValue);
cm.SetEnabledOnValueEquals(gridEnabledItem, true, gridSpacingItem);
//Selection options
OptionGroup selectionGroup = Handler.AddGroup(GROUP_SELECTION);
selectionGroup.AddInt(PREFERRED_BACKBONE_COUNT, router.PreferredBackboneSegmentCount, 1, int.MaxValue);
selectionGroup.AddDouble(MINIMUM_BACKBONE_LENGTH, router.MinimumBackboneSegmentLength, 1, double.MaxValue);
//Routing options
OptionGroup routingGroup = Handler.AddGroup(GROUP_ROUTING);
routingGroup.AddDouble(CROSSING_COST, router.CrossingCost, 0, double.MaxValue);
routingGroup.AddBool(CROSSING_REROUTING, router.Rerouting);
routingGroup.AddInt(MINIMUM_CONNECTIONS_COUNT, router.MinimumBusConnectionsCount, 0, int.MaxValue);
}
///<inheritdoc/>
protected override void SetupHandler()
{
createOrganic();
OptionGroup visualGroup = Handler.AddGroup(VISUAL);
visualGroup.AddList(SCOPE, scopeEnum.Keys, ALL);
visualGroup.AddList(INITIAL_PLACEMENT, initialPlacementEnum.Keys, AS_IS);
visualGroup.AddDouble(PREFERRED_EDGE_LENGTH, organic.PreferredEdgeLength, 0.0, double.MaxValue);
visualGroup.AddBool(OBEY_NODE_SIZES, organic.ConsiderNodeSizes);
visualGroup.AddInt(ATTRACTION, organic.Attraction, 0, 2);
visualGroup.AddInt(REPULSION, organic.Repulsion, 0, 2);
visualGroup.AddDouble(GRAVITY_FACTOR, organic.GravityFactor, -0.2, 2);
visualGroup.AddBool(ACTIVATE_TREE_BEAUTIFIER, organic.ActivateTreeBeautifier);
OptionGroup algoGroup = Handler.AddGroup(ALGORITHM);
algoGroup.AddDouble(ITERATION_FACTOR, organic.IterationFactor);
algoGroup.AddInt(MAXIMAL_DURATION, (int)(organic.MaximumDuration / 1000));
algoGroup.AddBool(ACTIVATE_DETERMINISTIC_MODE, organic.Deterministic);
algoGroup.AddBool(ACTIVATE_MULTI_THREADING, organic.MultiThreadingAllowed);
OptionGroup groupingGroup = Handler.AddGroup(GROUPING);
groupingGroup.AddList(GROUP_LAYOUT_POLICY, groupPolicyEnum.Keys, LAYOUT_GROUPS);
groupingGroup.AddDouble(GROUP_NODE_COMPACTNESS, organic.GroupNodeCompactness, 0, 1);
}
///<inheritdoc/>
protected override void SetupHandler()
{
OptionGroup generalGroup = Handler.AddGroup(GENERAL);
generalGroup.AddList(LAYOUT_STYLE, enumStyle, DIRECTED);
IOptionItem allowNonTreeItem = generalGroup.AddBool(ALLOW_NON_TREE_EDGES, true);
IOptionItem nonTreeStyleItem = generalGroup.AddList(ROUTING_STYLE_FOR_NON_TREE_EDGES, enumRoute, ROUTE_ORTHOGONAL);
ConstraintManager cm = new ConstraintManager(Handler);
cm.SetEnabledOnValueEquals(allowNonTreeItem, true, nonTreeStyleItem);
generalGroup.AddBool(ACT_ON_SELECTION_ONLY, false);
var bundlingStrength = generalGroup.AddDouble(EDGE_BUNDLING_STRENGTH, 0.99, 0, 1);
cm.SetEnabledOnValueEquals(nonTreeStyleItem, ROUTE_BUNDLED, bundlingStrength);
ClassicTreeLayout treeLayout = new ClassicTreeLayout();
OptionGroup directedGroup = Handler.AddGroup(DIRECTED);
directedGroup.AddInt(MINIMAL_NODE_DISTANCE, (int)treeLayout.MinimumNodeDistance, 1, int.MaxValue);
directedGroup.AddInt(MINIMAL_LAYER_DISTANCE, (int)treeLayout.MinimumLayerDistance, 10, int.MaxValue);
directedGroup.AddList(ORIENTATION, enumOrient.Keys, TOP_TO_BOTTOM);
directedGroup.AddList(PORT_STYLE, enumPortStyle.Keys, NODE_CENTER_PORTS);
directedGroup.AddBool(INTEGRATED_NODE_LABELING, false);
directedGroup.AddBool(INTEGRATED_EDGE_LABELING, false);
IOptionItem edgeRoutingOption = directedGroup.AddBool(ORTHOGONAL_EDGE_ROUTING, false);
IOptionItem busAlignmentOption = directedGroup.AddDouble(BUS_ALIGNMENT, 0.5, 0, 1);
directedGroup.AddDouble(VERTICAL_ALIGNMENT, 0.5, 0, 1);
var childPolicyItem = directedGroup.AddList(CHILD_PLACEMENT_POLICY, childPlacementPolicies.Keys, SIBLINGS_ON_SAME_LAYER);
var globalLayeringItem = directedGroup.AddBool(ENFORCE_GLOBAL_LAYERING, false);
cm.SetEnabledOnCondition(ConstraintManager.LogicalCondition.And(cm.CreateValueEqualsCondition(edgeRoutingOption, true),
ConstraintManager.LogicalCondition.Or(cm.CreateValueEqualsCondition(globalLayeringItem, true),
cm.CreateValueEqualsCondition(childPolicyItem, ALL_LEAVES_ON_SAME_LAYER))),
busAlignmentOption);
var ar = new AspectRatioTreeLayout();
OptionGroup arGroup = Handler.AddGroup(AR);
arGroup.AddInt(HORIZONTAL_SPACE, (int)ar.HorizontalDistance);
arGroup.AddInt(VERTICAL_SPACE, (int)ar.VerticalDistance);
arGroup.AddInt(BEND_DISTANCE, (int)ar.BendDistance);
IOptionItem ratioItem = arGroup.AddDouble(ASPECT_RATIO, ar.AspectRatio);
IOptionItem useViewItem = arGroup.AddBool(USE_VIEW_ASPECT_RATIO, true);
cm.SetEnabledOnValueEquals(useViewItem, false, ratioItem);
}
///<inheritdoc/>
protected override void SetupHandler()
{
ConstraintManager cm = new ConstraintManager(Handler);
OptionGroup toplevelGroup = Handler.AddGroup(TOP_LEVEL);
//the toplevel group will show neither in Table view nor in dialog view explicitely
//it's children will be shown one level above
toplevelGroup.SetAttribute(TableEditorFactory.RENDERING_HINTS_ATTRIBUTE,
(int)TableEditorFactory.RenderingHints.Invisible);
toplevelGroup.SetAttribute(DefaultEditorFactory.RENDERING_HINTS_ATTRIBUTE,
(int)DefaultEditorFactory.RenderingHints.Invisible);
OptionGroup generalGroup = toplevelGroup.AddGroup(GENERAL);
OptionItem operationItem = generalGroup.AddList(OPERATION, operationEnum.Keys, SCALE);
generalGroup.AddBool(ACT_ON_SELECTION_ONLY, false);
OptionGroup rotateGroup = toplevelGroup.AddGroup(ROTATE);
cm.SetEnabledOnValueEquals(operationItem, ROTATE, rotateGroup);
rotateGroup.AddInt(ROTATION_ANGLE, (int)transformer.RotationAngle, -360, 360);
rotateGroup.AddBool(APPLY_BEST_FIT_ROTATION, applyBestFitRotation);
OptionGroup scaleGroup = toplevelGroup.AddGroup(SCALE);
cm.SetEnabledOnValueEquals(operationItem, SCALE, scaleGroup);
scaleGroup.AddDouble(SCALE_FACTOR, transformer.ScaleFactorX, 0.1, 10.0);
scaleGroup.AddBool(SCALE_NODE_SIZE, transformer.ScaleNodeSize);
OptionGroup translateGroup = toplevelGroup.AddGroup(TRANSLATE);
cm.SetEnabledOnValueEquals(operationItem, TRANSLATE, translateGroup);
translateGroup.AddDouble(TRANSLATE_X, transformer.TranslateX);
translateGroup.AddDouble(TRANSLATE_Y, transformer.TranslateY);
}
protected override void SetupHandler()
{
CreateLayout();
OptionGroup generalGroup = Handler.AddGroup(GENERAL);
generalGroup.AddList(CENTER_STRATEGY, centerNodeStrategies.Keys, CENTER_WEIGHTED_CENTRAL);
generalGroup.AddList(LAYERING_STRATEGY, layeringStrategies.Keys, LAYERING_BFS);
generalGroup.AddDouble(MINIMAL_LAYER_DISTANCE, (int)layout.MinimumLayerDistance, 1, 1000);
generalGroup.AddDouble(MINIMAL_NODE_DISTANCE, (int)layout.MinimumNodeToNodeDistance, 0, 300);
generalGroup.AddDouble(MAXIMAL_CHILD_SECTOR_SIZE, (int)layout.MaximumChildSectorAngle, 15, 360);
OptionItem routingStrategyItem = generalGroup.AddList(EDGE_ROUTING_STRATEGY, edgeRoutingStrategies, EDGE_ARC);
int smoothness =
(int)
Math.Min(MAXIMUM_SMOOTHNESS,
(1 + MAXIMUM_SMOOTHNESS * SMOOTHNESS_ANGLE_FACTOR - layout.MinimumBendAngle) / SMOOTHNESS_ANGLE_FACTOR);
IOptionItem smoothnessItem = generalGroup.AddInt(EDGE_SMOOTHNESS, smoothness, MINIMUM_SMOOTHNESS, MAXIMUM_SMOOTHNESS);
ConstraintManager cm = new ConstraintManager(Handler);
cm.SetEnabledOnValueEquals(routingStrategyItem, EDGE_ARC, smoothnessItem);
var bundlingStrength = generalGroup.AddDouble(EDGE_BUNDLING_STRENGTH, 0.99, 0, 1);
cm.SetEnabledOnValueEquals(routingStrategyItem, EDGE_BUNDLES, bundlingStrength);
generalGroup.AddBool(CONSIDER_NODE_LABELS, layout.ConsiderNodeLabels);
}
private void SetupHandler()
{
handler = new OptionHandler(SnappingConfiguration);
OptionGroup currentGroup = handler.AddGroup(CollectSnapLinesGroup);
currentGroup.AddBool(CollectNodePairSnapLines, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(CollectNodePairCenterSnapLines, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(CollectSameSizeSnapLines, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(CollectNodeSnapLines, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(CollectEdgeSnapLines, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(CollectPortSnapLines, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(OrthogonalMovement, false).PropertyChanged += OnSnappingChanged;
OptionGroup innerGroup = currentGroup.AddGroup(SnappingDistancesGroup);
innerGroup.AddDouble(NodeToNode, 50).PropertyChanged += OnSnappingChanged;
innerGroup.AddDouble(NodeToEdge, 30).PropertyChanged += OnSnappingChanged;
innerGroup.AddDouble(EdgeToEdge, 40).PropertyChanged += OnSnappingChanged;
currentGroup = handler.AddGroup(OrthogonalSnappingGroup);
currentGroup.AddBool(OrthogonalPorts, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(OrthogonalBends, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(OrthogonalEdgeCreation, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(OrthogonalEdgeEditing, false).PropertyChanged += OnSnappingChanged;
currentGroup = handler.AddGroup(SnappingElementsGroup);
currentGroup.AddBool(SnapNodes, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(SnapBends, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(SnapAdjacentBends, true).PropertyChanged += OnSnappingChanged;
currentGroup.AddBool(SnapSegments, true).PropertyChanged += OnSnappingChanged;
currentGroup = handler.AddGroup(GridGroup);
currentGroup.AddOptionItem(
new CollectionOptionItem <GridSnapTypes>(GridSnapping,
new List <GridSnapTypes> {
GridSnapTypes.All, GridSnapTypes.GridPoints, GridSnapTypes.Lines, GridSnapTypes.VerticalLines, GridSnapTypes.HorizontalLines, GridSnapTypes.None
},
GridSnapTypes.None
)).PropertyChanged += OnSnappingChanged;
currentGroup.AddInt(GridHorizontalWidth, 50).PropertyChanged += OnGridHorizontalWidthChanged;
currentGroup.AddInt(GridVerticalWidth, 50).PropertyChanged += OnGridVerticalWidthChanged;
currentGroup.AddInt(GridSnapDistance, 10).PropertyChanged += OnGridSnapDistanceChanged;
}
///<inheritdoc/>
protected override void SetupHandler()
{
CircularLayout layout = new CircularLayout();
BalloonLayout treeLayout = layout.BalloonLayout;
OptionGroup generalGroup = Handler.AddGroup(GENERAL);
var styleItem = generalGroup.AddList(LAYOUT_STYLE, globalLayoutStyles.Keys, BCC_COMPACT);
generalGroup.AddBool(ACT_ON_SELECTION_ONLY, false);
generalGroup.AddBool(FROM_SKETCH, false);
generalGroup.AddBool(HANDLE_NODE_LABELS, false);
OptionGroup cycleGroup = Handler.AddGroup(CYCLE);
cycleGroup.AddList(PARTITION_LAYOUT_STYLE, partitionLayoutStyles.Keys, PARTITION_LAYOUTSTYLE_CYCLIC);
IOptionItem minDistItem = cycleGroup.AddInt(MINIMAL_NODE_DISTANCE, 30, 0, int.MaxValue);
IOptionItem autoRadiusItem = cycleGroup.AddBool(CHOOSE_RADIUS_AUTOMATICALLY, true);
IOptionItem fixedRadiusItem = cycleGroup.AddInt(FIXED_RADIUS, 200, 1, int.MaxValue);
ConstraintManager cm = new ConstraintManager(Handler);
cm.SetEnabledOnValueEquals(autoRadiusItem, true, minDistItem);
cm.SetEnabledOnValueEquals(autoRadiusItem, false, fixedRadiusItem);
OptionGroup bundlingGroup = Handler.AddGroup(EDGE_BUNDLING);
IOptionItem bundlingEnabled = bundlingGroup.AddBool(EDGE_BUNDLING_ENABLED, false);
IOptionItem bundlingStrength = bundlingGroup.AddDouble(EDGE_BUNDLING_STRENGTH, 0.95, 0, 1);
cm.SetEnabledOnValueEquals(bundlingEnabled, true, bundlingStrength);
OptionGroup treeGroup = Handler.AddGroup(TREE);
treeGroup.AddInt(PREFERRED_CHILD_WEDGE, treeLayout.PreferredChildWedge, 1, 360);
treeGroup.AddInt(MINIMAL_EDGE_LENGTH, treeLayout.MinimumEdgeLength, 1, int.MaxValue);
treeGroup.AddInt(MAXIMAL_DEVIATION_ANGLE, layout.MaximumDeviationAngle, 1, 360);
treeGroup.AddDouble(COMPACTNESS_FACTOR, treeLayout.CompactnessFactor, 0.1, 0.9);
treeGroup.AddInt(MINIMAL_TREE_NODE_DISTANCE, treeLayout.MinimumNodeDistance, 0, int.MaxValue);
treeGroup.AddBool(ALLOW_OVERLAPS, treeLayout.AllowOverlaps);
treeGroup.AddBool(PLACE_CHILDREN_ON_COMMON_RADIUS, true);
cm.SetEnabledOnCondition(ConstraintManager.LogicalCondition.Not(cm.CreateValueEqualsCondition(styleItem, SINGLE_CYCLE)), treeGroup);
}
///<inheritdoc/>
protected override void SetupHandler()
{
createRouter();
OptionGroup layoutGroup = Handler.AddGroup(TOP_LEVEL);
layoutGroup.SetAttribute(TableEditorFactory.RENDERING_HINTS_ATTRIBUTE, TableEditorFactory.RenderingHints.Invisible);
layoutGroup.SetAttribute(DefaultEditorFactory.RENDERING_HINTS_ATTRIBUTE, DefaultEditorFactory.RenderingHints.Invisible);
ConstraintManager cm = new ConstraintManager(Handler);
layoutGroup.AddList(SCOPE, scopes, SCOPE_ALL_EDGES);
layoutGroup.AddBool(USE_SELECTED_EDGES_AS_MASTER, false);
layoutGroup.AddBool(CONSIDER_EDGE_DIRECTION, router.DirectedMode);
layoutGroup.AddBool(USE_ADAPTIVE_LINE_DISTANCE, router.AdaptiveLineDistances);
layoutGroup.AddInt(LINE_DISTANCE, (int)router.LineDistance, 0, 50);
IOptionItem joinEndsItem = layoutGroup.AddBool(JOINS_ENDS, router.JoinEnds);
IOptionItem joinDistanceItem = layoutGroup.AddInt(JOIN_DISTANCE, (int)router.AbsJoinEndDistance, 0, 50);
cm.SetEnabledOnValueEquals(joinEndsItem, true, joinDistanceItem);
}
static OptionHandler CreateHandler(GraphEditorForm form)
{
GraphControl gc = form.GraphControl;
IGraph g = form.Graph;
GraphEditorInputMode geim = form.GraphEditorInputMode;
OptionHandler handler = new OptionHandler(NAME);
OptionGroup controlGroup = handler.AddGroup(UI_DEFAULTS);
controlGroup.AddDouble(HitTestRadius, gc.HitTestRadius);
controlGroup.AddBool(AutoRemoveEmptyLabels, geim.AutoRemoveEmptyLabels);
// var gridEnabledItem = controlGroup.AddBool(GridEnabled, form.Grid.Enabled);
var gridVisibleItem = controlGroup.AddBool(GridVisible, form.GridVisible);
var gridWidthItem = controlGroup.AddInt(GridWidth, form.GridWidth);
var gridSnapTypeItem = controlGroup.AddList <GridSnapTypes>(GridSnapeType, new List <GridSnapTypes>
{
GridSnapTypes.All, GridSnapTypes.GridPoints, GridSnapTypes.HorizontalLines, GridSnapTypes.Lines, GridSnapTypes.None, GridSnapTypes.VerticalLines
}, form.GridSnapType);
ConstraintManager cm = new ConstraintManager(handler);
cm.SetEnabledOnCondition(
ConstraintManager.LogicalCondition.Or(cm.CreateValueEqualsCondition(gridVisibleItem, true),
cm.CreateValueEqualsCondition(gridVisibleItem, true)),
gridWidthItem);
cm.SetEnabledOnValueEquals(gridVisibleItem, true, gridSnapTypeItem);
if (g != null)
{
OptionGroup graphGroup = handler.AddGroup(GRAPH_SETTINGS);
graphGroup.AddBool(AutoAdjustPreferredLabelSize, g.NodeDefaults.Labels.AutoAdjustPreferredSize);
graphGroup.AddBool(AutoCleanupPorts, g.NodeDefaults.Ports.AutoCleanUp);
OptionGroup sharingGroup = graphGroup.AddGroup(SHARING_SETTINGS);
sharingGroup.AddBool(ShareDefaultNodeStyleInstance, g.NodeDefaults.ShareStyleInstance);
sharingGroup.AddBool(ShareDefaultEdgeStyleInstance, g.EdgeDefaults.ShareStyleInstance);
sharingGroup.AddBool(ShareDefaultNodeLabelStyleInstance, g.NodeDefaults.Labels.ShareStyleInstance);
sharingGroup.AddBool(ShareDefaultEdgeLabelStyleInstance, g.EdgeDefaults.Labels.ShareStyleInstance);
sharingGroup.AddBool(ShareDefaultPortStyleInstance, g.NodeDefaults.Ports.ShareStyleInstance);
sharingGroup.AddBool(ShareDefaultNodeLabelModelParameter, g.NodeDefaults.Labels.ShareLayoutParameterInstance);
sharingGroup.AddBool(ShareDefaultEdgeLabelModelParameter, g.EdgeDefaults.Labels.ShareLayoutParameterInstance);
}
OptionGroup miscGroup = handler.AddGroup(MISC_SETTINGS);
UndoEngine undoEngine = form.Graph.GetUndoEngine();
if (undoEngine != null)
{
miscGroup.AddInt(UndoEngine_Size, undoEngine.Size);
}
return(handler);
}
///<inheritdoc/>
protected override void SetupHandler()
{
createRouter();
OptionGroup layoutGroup = Handler.AddGroup(LAYOUT_OPTIONS);
layoutGroup.Attributes[TableEditorFactory.RenderingHintsAttribute] = TableEditorFactory.RenderingHints.Invisible;
layoutGroup.Attributes[DefaultEditorFactory.RenderingHintsAttribute] = DefaultEditorFactory.RenderingHints.Invisible;
layoutGroup.AddBool(SELECTION_ONLY, false);
layoutGroup.AddInt(MINIMAL_NODE_DISTANCE, (int)router.MinimumDistance, 10, int.MaxValue);
layoutGroup.AddBool(USE_BENDS, router.KeepExistingBends);
layoutGroup.AddBool(ROUTE_ONLY_NECESSARY, !router.RouteAllEdges);
layoutGroup.AddBool(ALLOW_MOVING_NODES, false);
}
/// <summary>
/// sets up the option handler for specifying the layout parameters.
/// </summary>
protected override void SetupHandler()
{
// global layout options
OptionGroup layoutGroup = Handler.AddGroup(LAYOUT);
layoutGroup.AddList(STYLE, styles.Keys, NORMAL);
layoutGroup.AddInt(GRID, 25, 1, int.MaxValue);
layoutGroup.AddBool(LENGTH_REDUCTION, true);
var fromSketchItem = layoutGroup.AddBool(USE_EXISTING_DRAWING_AS_SKETCH, false);
layoutGroup.AddBool(CROSSING_POSTPROCESSING, true);
layoutGroup.AddBool(PERCEIVED_BENDS_POSTPROCESSING, true);
layoutGroup.AddBool(USE_RANDOMIZATION, true);
layoutGroup.AddBool(USE_FACE_MAXIMIZATION, false);
//edge label options
OptionGroup labelingGroup = Handler.AddGroup(LABELING);
labelingGroup.AddList(EDGE_LABELING, edgeLabeling, NONE);
labelingGroup.AddList(EDGE_LABEL_MODEL, edgeLabelModel, BEST);
labelingGroup.AddBool(CONSIDER_NODE_LABELS, false);
ConstraintManager cm = new ConstraintManager(Handler);
//edge options
OptionGroup edgeGroup = Handler.AddGroup(EDGES);
var selection = edgeGroup.AddBool(DRAW_SELECTED_EDGES_UPWARDS, false);
var busRouting = edgeGroup.AddBool(UPWARD_EDGE_BUS_ROUTING, true);
var directionEnum = edgeGroup.AddList(ORIENTATION, orientEnum.Keys, TOP_TO_BOTTOM);
cm.SetEnabledOnValueEquals(selection, true, busRouting);
cm.SetEnabledOnValueEquals(selection, true, directionEnum);
edgeGroup.AddDouble(MINIMUM_FIRST_SEGMENT_LENGTH, 15, 1, 500);
edgeGroup.AddDouble(MINIMUM_SEGMENT_LENGTH, 15, 1, 500);
edgeGroup.AddDouble(MINIMUM_LAST_SEGMENT_LENGTH, 15, 1, 500);
// node grouping options
OptionGroup groupingGroup = Handler.AddGroup(GROUPING);
groupingGroup.AddList(GROUP_LAYOUT_POLICY, groupPolicy, LAYOUT_GROUPS);
var c = cm.CreateValueEqualsCondition(fromSketchItem, false);
cm.SetEnabledOnCondition(c, layoutGroup[CROSSING_POSTPROCESSING]);
cm.SetEnabledOnCondition(c, layoutGroup[PERCEIVED_BENDS_POSTPROCESSING]);
cm.SetEnabledOnCondition(c, layoutGroup[STYLE]);
cm.SetEnabledOnCondition(c, layoutGroup[USE_RANDOMIZATION]);
}
/// <summary>
/// Initializes the option handler for the export
/// </summary>
private void SetupHandler()
{
handler = new OptionHandler(IMAGE_EXPORT);
handler.PropertyChanged += handler_PropertyChanged;
OptionGroup currentGroup = handler.AddGroup(OUTPUT);
OptionItem formatItem = currentGroup.AddList(FORMAT, Formats.Keys, FORMAT_JPG);
currentGroup.AddBool(HIDE_DECORATIONS, true);
currentGroup.AddBool(EXPORT_RECTANGLE, true);
currentGroup = handler.AddGroup(BOUNDS);
OptionItem sizeItem = currentGroup.AddList(SIZE, SizeModes, USE_ORIGINAL_SIZE);
IOptionItem widthItem = currentGroup.AddInt(WIDTH, DefaultWidth, 1, int.MaxValue);
IOptionItem heightItem = currentGroup.AddInt(HEIGHT, DefaultHeight, 1, Int32.MaxValue);
currentGroup.AddDouble(SCALE, DefaultScale);
currentGroup = handler.AddGroup(MARGINS);
currentGroup.AddInt(LEFT_MARGIN, DefaultMargins);
currentGroup.AddInt(RIGHT_MARGIN, DefaultMargins);
currentGroup.AddInt(TOP_MARGIN, DefaultMargins);
currentGroup.AddInt(BOTTOM_MARGIN, DefaultMargins);
currentGroup = handler.AddGroup(JPG);
IOptionItem qualityItem = currentGroup.AddDouble(QUALITY, DefaultQuality);
currentGroup = handler.AddGroup(TIFF);
OptionItem compressionItem = currentGroup.AddList(COMPRESSION,
Compressions.Keys, DefaultCompression);
currentGroup = handler.AddGroup(PNG);
var transparentItem = currentGroup.AddBool(TRANSPARENT, false);
var cm = new ConstraintManager(Handler);
cm.SetEnabledOnValueEquals(sizeItem, SPECIFY_WIDTH, widthItem);
cm.SetEnabledOnValueEquals(sizeItem, SPECIFY_HEIGHT, heightItem);
cm.SetEnabledOnValueEquals(formatItem, FORMAT_PNG, transparentItem);
cm.SetEnabledOnValueEquals(formatItem, FORMAT_JPG, qualityItem);
cm.SetEnabledOnValueEquals(formatItem, FORMAT_TIFF, compressionItem);
// localization
var rm =
new ResourceManager("Demo.yFiles.ImageExport.ImageExport",
Assembly.GetExecutingAssembly());
var rmf = new ResourceManagerI18NFactory();
rmf.AddResourceManager(Handler.Name, rm);
Handler.I18nFactory = rmf;
}
///<inheritdoc/>
protected override void SetupHandler()
{
OptionGroup layoutGroup = Handler.AddGroup(GENERAL);
layoutGroup.SetAttribute(TableEditorFactory.RENDERING_HINTS_ATTRIBUTE, TableEditorFactory.RenderingHints.Invisible);
layoutGroup.SetAttribute(DefaultEditorFactory.RENDERING_HINTS_ATTRIBUTE, DefaultEditorFactory.RenderingHints.Invisible);
layoutGroup.AddList(ROUTING_TO_SUBGRAPH, routingStrategies.Keys, ROUTING_TO_SUBGRAPH_AUTO);
layoutGroup.AddList(MODE_COMPONENT_ASSIGNMENT, componentAssignment.Keys, MODE_COMPONENT_CONNECTED);
layoutGroup.AddList(SUBGRAPH_LAYOUT, subgraphLayouts, subgraphLayouts[0]);
layoutGroup.AddList(SUBGRAPH_POSITION_STRATEGY, subgraphPlacementStrategies.Keys,
SUBGRAPH_POSITIONING_STRATEGY_FROM_SKETCH);
layoutGroup.AddInt(MIN_NODE_DIST, 30, 1, 100);
layoutGroup.AddList(ORIENTATION_MAIN_GRAPH, layoutOrientation.Keys, ORIENTATION_MAIN_GRAPH_AUTO_DETECT);
layoutGroup.AddBool(CONSIDER_SNAPLINES, true);
layoutGroup.AddBool(CONSIDER_EDGE_DIRECTION, false);
}
/// <summary>
/// Initializes the option handler for the export
/// </summary>
private void SetupHandler()
{
handler = new OptionHandler(NODE_LABELING);
OptionGroup currentGroup = handler;
//Trigger an automatic relayout whenever an option changes
currentGroup.AddList(LABEL_MODEL, LabelModels.Keys, "LABEL_MODEL_EXTERIOR").PropertyChanged +=
HandlerPropertyChanged;
currentGroup.AddInt(LABEL_SIZE, 8).PropertyChanged += HandlerPropertyChanged;
// localization
var rm =
new ResourceManager("Demo.yFiles.Layout.NodeLabeling.NodeLabeling",
Assembly.GetExecutingAssembly());
var rmf = new ResourceManagerI18NFactory();
rmf.AddResourceManager(Handler.Name, rm);
Handler.I18nFactory = rmf;
}
///<inheritdoc/>
protected override void SetupHandler()
{
CreateOrganic();
ConstraintManager cm = new ConstraintManager(Handler);
OptionGroup visualGroup = Handler.AddGroup(VISUAL);
visualGroup.AddList(SCOPE, scopes.Keys, SCOPE_ALL);
visualGroup.AddInt(PREFERRED_EDGE_LENGTH, (int)organic.PreferredEdgeLength, 5, int.MaxValue);
IOptionItem considerNodeLabelsItem = visualGroup.AddBool(CONSIDER_NODE_LABELS, organic.ConsiderNodeLabels);
IOptionItem allowNodeOverlapsItem = visualGroup.AddBool(ALLOW_NODE_OVERLAPS, organic.NodeOverlapsAllowed);
IOptionItem minDistItem = visualGroup.AddDouble(MINIMAL_NODE_DISTANCE, 10, 0, double.MaxValue);
ICondition condition = ConstraintManager.LogicalCondition.Or(cm.CreateValueEqualsCondition(allowNodeOverlapsItem, false),
cm.CreateValueEqualsCondition(considerNodeLabelsItem, true));
cm.SetEnabledOnCondition(condition, minDistItem);
visualGroup.AddBool(AVOID_NODE_EDGE_OVERLAPS, organic.NodeEdgeOverlapAvoided);
cm.SetEnabledOnValueEquals(considerNodeLabelsItem, false, allowNodeOverlapsItem);
visualGroup.AddDouble(COMPACTNESS, organic.CompactnessFactor, 0, 1);
visualGroup.AddBool(USE_AUTO_CLUSTERING, organic.ClusterNodes);
visualGroup.AddDouble(AUTO_CLUSTERING_QUALITY, organic.ClusteringQuality, 0, 1);
cm.SetEnabledOnValueEquals(visualGroup[USE_AUTO_CLUSTERING], true, visualGroup[AUTO_CLUSTERING_QUALITY]);
OptionGroup outputRestrictionsGroup = Handler.AddGroup(RESTRICTIONS);
OptionItem outputRestrictionsItem =
outputRestrictionsGroup.AddList(RESTRICT_OUTPUT, outputRestrictions, NONE);
OptionGroup outputCageGroup = outputRestrictionsGroup.AddGroup(BOUNDS);
ICondition cond = cm.CreateValueIsOneOfCondition(outputRestrictionsItem, OUTPUT_CAGE, OUTPUT_ELLIPTICAL_CAGE);
cm.SetEnabledOnCondition(cond, outputCageGroup);
//IOptionItem rectCageUseViewItem = new BoolOptionItem(RECT_CAGE_USE_VIEW, true);
IOptionItem rectCageUseViewItem = outputCageGroup.AddBool(RECT_CAGE_USE_VIEW, true);
IOptionItem cageXItem = outputCageGroup.AddDouble(CAGE_X, 0.0d);
IOptionItem cageYItem = outputCageGroup.AddDouble(CAGE_Y, 0.0d);
IOptionItem cageWidthItem = outputCageGroup.AddDouble(CAGE_WIDTH, 1000.0d, 1, double.MaxValue);
IOptionItem cageHeightItem = outputCageGroup.AddDouble(CAGE_HEIGHT, 1000.0d, 1, double.MaxValue);
cm.SetEnabledOnValueEquals(rectCageUseViewItem, false, cageXItem);
cm.SetEnabledOnValueEquals(rectCageUseViewItem, false, cageYItem);
cm.SetEnabledOnValueEquals(rectCageUseViewItem, false, cageWidthItem);
cm.SetEnabledOnValueEquals(rectCageUseViewItem, false, cageHeightItem);
OptionGroup outputARGroup = outputRestrictionsGroup.AddGroup(OUTPUT_AR);
cm.SetEnabledOnValueEquals(outputRestrictionsItem, OUTPUT_AR, outputARGroup);
IOptionItem arCageUseViewItem = outputARGroup.AddBool(AR_CAGE_USE_VIEW, true);
IOptionItem cageRatioItem = outputARGroup.AddDouble(CAGE_RATIO, 1.0d);
cm.SetEnabledOnValueEquals(arCageUseViewItem, false, cageRatioItem);
OptionGroup groupingGroup = Handler.AddGroup(GROUPING);
groupingGroup.AddList(GROUP_LAYOUT_POLICY, groupModes, LAYOUT_GROUPS);
OptionGroup algorithmGroup = Handler.AddGroup(ALGORITHM);
algorithmGroup.AddDouble(QUALITY_TIME_RATIO, organic.QualityTimeRatio, 0, 1);
algorithmGroup.AddInt(MAXIMAL_DURATION, (int)(organic.MaximumDuration / 1000), 0, int.MaxValue);
algorithmGroup.AddBool(ACTIVATE_DETERMINISTIC_MODE, organic.Deterministic);
algorithmGroup.AddBool(ALLOW_MULTI_THREADING, true);
}
///<inheritdoc/>
protected override void SetupHandler()
{
OptionGroup generalGroup = Handler.AddGroup(GENERAL);
OptionGroup interactionGroup = generalGroup.AddGroup(INTERACTION);
interactionGroup.AddBool(SELECTED_ELEMENTS_INCREMENTALLY, false);
IOptionItem useDrawingItem = interactionGroup.AddBool(USE_DRAWING_AS_SKETCH, false);
interactionGroup.SetAttribute(TableEditorFactory.RENDERING_HINTS_ATTRIBUTE, TableEditorFactory.RenderingHints.Invisible);
generalGroup.AddList(ORIENTATION, orientEnum.Keys, TOP_TO_BOTTOM);
generalGroup.AddBool(LAYOUT_COMPONENTS_SEPARATELY, false);
IOptionItem symmetricPlacement = generalGroup.AddBool(SYMMETRIC_PLACEMENT, true);
generalGroup.AddInt(MAXIMUM_DURATION, 5);
OptionGroup distanceGroup = generalGroup.AddGroup(MINIMUM_DISTANCES);
distanceGroup.AddDouble(NODE_TO_NODE_DISTANCE, 30.0d);
distanceGroup.AddDouble(NODE_TO_EDGE_DISTANCE, 15.0d);
distanceGroup.AddDouble(EDGE_TO_EDGE_DISTANCE, 15.0d);
distanceGroup.AddDouble(MINIMUM_LAYER_DISTANCE, 10.0d);
OptionGroup edgeSettingsGroup = Handler.AddGroup(EDGE_SETTINGS);
OptionItem eoi = edgeSettingsGroup.AddList(EDGE_ROUTING, edgeRoutingEnum.Keys, EDGE_ROUTING_ORTHOGONAL);
edgeSettingsGroup.AddBool(BACKLOOP_ROUTING, false);
edgeSettingsGroup.AddBool(AUTOMATIC_EDGE_GROUPING_ENABLED, false);
IOptionItem edgeStraightening = edgeSettingsGroup.AddBool(EDGE_STRAIGHTENING_OPTIMIZATION_ENABLED, false);
edgeSettingsGroup.AddBool(CONSIDER_EDGE_THICKNESS, false);
edgeSettingsGroup.AddBool(CONSIDER_EDGE_DIRECTION, false);
edgeSettingsGroup.AddDouble(MINIMUM_FIRST_SEGMENT_LENGTH, 10.0d);
edgeSettingsGroup.AddDouble(MINIMUM_LAST_SEGMENT_LENGTH, 15.0d);
edgeSettingsGroup.AddDouble(MINIMUM_EDGE_LENGTH, 20.0d);
edgeSettingsGroup.AddDouble(MINIMUM_EDGE_DISTANCE, 15.0d);
ConstraintManager cm = new ConstraintManager(Handler);
cm.SetEnabledOnValueEquals(eoi, EDGE_ROUTING_POLYLINE,
edgeSettingsGroup.AddDouble(MINIMUM_SLOPE, 0.25d, 0.0d, 5.0d));
cm.SetEnabledOnValueEquals(symmetricPlacement, false, edgeStraightening);
edgeSettingsGroup.AddBool(PC_OPTIMIZATION_ENABLED, false);
edgeSettingsGroup.AddList(RECURSIVE_EDGE_ROUTING, new[] { RECURSIVE_EDGE_ROUTING_OFF, RECURSIVE_EDGE_ROUTING_DIRECTED, RECURSIVE_EDGE_ROUTING_UNDIRECTED }, RECURSIVE_EDGE_ROUTING_OFF);
OptionGroup rankGroup = Handler.AddGroup(RANKS);
rankGroup.AddList(RANKING_POLICY, rankingPolicies.Keys, HIERARCHICAL_OPTIMAL);
rankGroup.AddList(LAYER_ALIGNMENT, alignmentEnum.Keys, BOTTOM);
rankGroup.AddList(COMPONENT_ARRANGEMENT_POLICY, componentAlignmentEnum.Keys, POLICY_TOPMOST);
OptionGroup sketchGroup = rankGroup.AddGroup(FROM_SKETCH_PROPERTIES);
sketchGroup.AddDouble(SCALE, 1.0d, 0.0d, 5.0d);
sketchGroup.AddDouble(HALO, 0.0d);
sketchGroup.AddDouble(MINIMUM_SIZE, 0.0d, 0, Double.MaxValue);
sketchGroup.AddDouble(MAXIMUM_SIZE, 1000.0d, 0, Double.MaxValue);
cm.SetEnabledOnValueEquals(Handler.GetItemByName(RANKS + "." + RANKING_POLICY), FROM_SKETCH,
Handler.GetItemByName(RANKS + "." + FROM_SKETCH_PROPERTIES));
OptionGroup labelingGroup = Handler.AddGroup(LABELING);
OptionGroup npGroup = labelingGroup.AddGroup(NODE_PROPERTIES);
npGroup.AddBool(CONSIDER_NODE_LABELS, true);
npGroup.SetAttribute(TableEditorFactory.RENDERING_HINTS_ATTRIBUTE, TableEditorFactory.RenderingHints.Invisible);
//npGroup.SetAttribute(DefaultEditorFactory.RenderingHintsAttribute,
// DefaultEditorFactory.RenderingHints.Invisible);
OptionGroup epGroup = labelingGroup.AddGroup(LABELING_EDGE_PROPERTIES);
CollectionOptionItem <string> edgeLabelingEnumItem = epGroup.AddList(EDGE_LABELING, edgeLabeling, EDGE_LABELING_NONE);
CollectionOptionItem <string> labelModelItem = epGroup.AddList(EDGE_LABEL_MODEL, edgeLabelModel, EDGE_LABEL_MODEL_BEST);
epGroup.SetAttribute(TableEditorFactory.RENDERING_HINTS_ATTRIBUTE, TableEditorFactory.RenderingHints.Invisible);
ICondition cond = ConstraintManager.LogicalCondition.Not(cm.CreateValueEqualsCondition(edgeLabelingEnumItem, EDGE_LABELING_NONE));
cm.SetEnabledOnCondition(cond, labelModelItem);
IOptionItem compactEdgeLabel = epGroup.AddBool(COMPACT_EDGE_LABEL_PLACEMENT, true);
cm.SetEnabledOnValueEquals(edgeLabelingEnumItem, EDGE_LABELING_HIERARCHIC, compactEdgeLabel);
OptionGroup groupingGroup = Handler.AddGroup(GROUPING);
CollectionOptionItem <string> groupStrategyItem = groupingGroup.AddList(GROUP_LAYERING_STRATEGY, groupStrategyEnum.Keys, RECURSIVE_LAYERING);
CollectionOptionItem <string> groupAlignItem = groupingGroup.AddList(GROUP_ALIGNMENT, groupAlignmentEnum.Keys, GROUP_ALIGN_TOP);
IOptionItem groupCompactionItem = groupingGroup.AddBool(GROUP_ENABLE_COMPACTION, false);
groupingGroup.AddList(GROUP_HORIZONTAL_COMPACTION, groupHorizCompactionEnum.Keys, GROUP_HORIZONTAL_COMPACTION_NONE);
cm.SetEnabledOnValueEquals(groupStrategyItem, RECURSIVE_LAYERING, groupCompactionItem);
cm.SetEnabledOnValueEquals(groupStrategyItem, RECURSIVE_LAYERING, groupAlignItem);
cm.SetEnabledOnValueEquals(useDrawingItem, false, groupStrategyItem);
cm.SetEnabledOnCondition(ConstraintManager.LogicalCondition.And(cm.CreateValueEqualsCondition(groupStrategyItem, RECURSIVE_LAYERING),
cm.CreateValueEqualsCondition(groupCompactionItem, false)), groupAlignItem);
cm.SetEnabledOnCondition(ConstraintManager.LogicalCondition.And(cm.CreateValueEqualsCondition(groupStrategyItem, RECURSIVE_LAYERING),
cm.CreateValueEqualsCondition(useDrawingItem, false)), groupCompactionItem);
OptionGroup swimGroup = Handler.AddGroup(SWIMLANES);
IOptionItem swimlaneOption = swimGroup.AddBool(TREAT_ROOT_GROUPS_AS_SWIMLANES, false);
IOptionItem fromSketchOption = swimGroup.AddBool(USE_ORDER_FROM_SKETCH, false);
IOptionItem spacingOption = swimGroup.AddDouble(SWIMLANE_SPACING, 0.0d, 0, Double.MaxValue);
cm.SetEnabledOnValueEquals(swimlaneOption, true, fromSketchOption);
cm.SetEnabledOnValueEquals(swimlaneOption, true, spacingOption);
OptionGroup gridGroup = Handler.AddGroup(GRID);
IOptionItem gridEnabled = gridGroup.AddBool(GRID_ENABLED, false);
IOptionItem gridSpacing = gridGroup.AddDouble(GRID_SPACING, 10);
IOptionItem gridPortAssignment = gridGroup.AddList(GRID_PORT_ASSIGNMENT, new[] { GRID_PORT_ASSIGNMENT_DEFAULT, GRID_PORT_ASSIGNMENT_ON_GRID, GRID_PORT_ASSIGNMENT_ON_SUBGRID }, GRID_PORT_ASSIGNMENT_DEFAULT);
cm.SetEnabledOnValueEquals(gridEnabled, true, gridSpacing);
cm.SetEnabledOnValueEquals(gridEnabled, true, gridPortAssignment);
}
/// <summary>
/// Initializes the option handler for the export
/// </summary>
private void SetupHandler()
{
handler = new OptionHandler(IMAGE_EXPORT);
handler.PropertyChanged += handler_PropertyChanged;
OptionGroup currentGroup = handler.AddGroup(OUTPUT);
OptionItem formatItem = currentGroup.AddList(FORMAT, Formats.Keys, FORMAT_JPG);
currentGroup.AddBool(HIDE_DECORATIONS, true);
currentGroup.AddBool(EXPORT_RECTANGLE, true);
currentGroup = handler.AddGroup(BOUNDS);
OptionItem sizeItem = currentGroup.AddList(SIZE, SizeModes, USE_ORIGINAL_SIZE);
IOptionItem widthItem = currentGroup.AddInt(WIDTH, DefaultWidth, 1, int.MaxValue);
IOptionItem heightItem = currentGroup.AddInt(HEIGHT, DefaultHeight, 1, Int32.MaxValue);
currentGroup.AddDouble(SCALE, DefaultScale);
currentGroup.AddDouble(ZOOM, DefaultZoom);
currentGroup = handler.AddGroup(GRAPHICS);
currentGroup.AddGeneric(SMOOTHING, SimpleSmoothingMode.HighSpeed).SetAttribute(
OptionItem.SUPPORT_NULL_VALUE_ATTRIBUTE, false);
currentGroup.AddGeneric(TEXTRENDERING, TextRenderingHint.SystemDefault).SetAttribute(
OptionItem.SUPPORT_NULL_VALUE_ATTRIBUTE, false);
currentGroup.AddGeneric(INTERPOLATION, InterpolationMode.Invalid).SetAttribute(
OptionItem.SUPPORT_NULL_VALUE_ATTRIBUTE, false);
currentGroup.AddGeneric(PIXELOFFSET, PixelOffsetMode.Invalid).SetAttribute(
OptionItem.SUPPORT_NULL_VALUE_ATTRIBUTE, false);
currentGroup = handler.AddGroup(MARGINS);
currentGroup.AddInt(LEFT_MARGIN, DefaultMargins);
currentGroup.AddInt(RIGHT_MARGIN, DefaultMargins);
currentGroup.AddInt(TOP_MARGIN, DefaultMargins);
currentGroup.AddInt(BOTTOM_MARGIN, DefaultMargins);
currentGroup = handler.AddGroup(JPG);
DoubleOptionItem qualityItem = currentGroup.AddDouble(QUALITY, DefaultQuality);
currentGroup = handler.AddGroup(TIFF);
OptionItem colorDepthItem = currentGroup.AddList(COLOR_DEPTH, ColorDepthList.Keys, DefaultDepth);
OptionItem compressionItem = currentGroup.AddList(COMPRESSION,
Compressions.Keys, DefaultCompression);
currentGroup = handler.AddGroup(PNG);
BoolOptionItem transparentPNGItem = currentGroup.AddBool(TRANSPARENT, false);
currentGroup = handler.AddGroup(EMF);
BoolOptionItem transparentEMFItem = currentGroup.AddBool(TRANSPARENT, false);
var cm = new ConstraintManager(Handler);
cm.SetEnabledOnValueEquals(sizeItem, SPECIFY_WIDTH, widthItem);
cm.SetEnabledOnValueEquals(sizeItem, SPECIFY_HEIGHT, heightItem);
cm.SetEnabledOnValueEquals(formatItem, FORMAT_EMF, transparentEMFItem);
cm.SetEnabledOnValueEquals(formatItem, FORMAT_PNG, transparentPNGItem);
cm.SetEnabledOnValueEquals(formatItem, FORMAT_JPG, qualityItem);
cm.SetEnabledOnValueEquals(formatItem, FORMAT_TIFF, colorDepthItem);
cm.SetEnabledOnValueEquals(formatItem, FORMAT_TIFF, compressionItem);
// localization
var rm =
new ResourceManager("Demo.yFiles.ImageExport.ImageExport",
Assembly.GetExecutingAssembly());
var rmf = new ResourceManagerI18NFactory();
rmf.AddResourceManager(Handler.Name, rm);
Handler.I18nFactory = rmf;
}
