private void DeleteRowCircle()
{
if (mgCircles.GetListCircles().Count == 0)
{
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Không có lỗ khoan");
}
else
{
List <Circle> listCircle = mgCircles.GetListCircleOfFirstRow();
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
Lcad.BlockUnselect(hBlockModel);
//xóa hàng lỗ khoan mới
mgCircles.RemoveListCircles(listCircle);
foreach (var circle in listCircle)
{
Lcad.BlockSelectEnt(hBlockModel, circle.GetHandle(), true);
Lcad.BlockSelErase(hBlockModel);
Lcad.BlockUnselect(hBlockModel);
}
//thêm lưới tọa độ
if (this.banVeChinh.HienKhoangCach) //sau them dk vao day
{
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
DungLuoiKichThuoc();
}
//load lại
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
}
}
//dựng lưới kích thước lỗ khoan
private void DungLuoiKichThuoc()
{
//xóa lớp lưới cũ
Lcad.LayerClear(layerLuoiKichThuoc, Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL));
List <Circle> danhSachLoKhoan = mgCircles.GetListCircles();
for (int i = 0; i < danhSachLoKhoan.Count - 1; i++)
{
for (int j = i + 1; j < danhSachLoKhoan.Count; j++)
{
double length = Math.Sqrt(Math.Pow((danhSachLoKhoan[i].GetX() - danhSachLoKhoan[j].GetX()), 2) + Math.Pow((danhSachLoKhoan[i].GetY() - danhSachLoKhoan[j].GetY()), 2));
if (Math.Round(length) == Math.Round(this.banVeChinh.DeltaX))
{
VeKhoangCach(danhSachLoKhoan[i], danhSachLoKhoan[j]);
}
else
{
if (Math.Round(length) == Math.Round(this.banVeChinh.DeltaY))
{
VeKhoangCach(danhSachLoKhoan[i], danhSachLoKhoan[j]);
}
}
}
}
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
}
private void AddRowCircle()
{
if (mgCircles.GetListCircles().Count == 0)
{
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Không có lỗ khoan");
}
else
{
List <Circle> listCircle = mgCircles.GetListCircleOfFirstRow();
List <Circle> listNewCircle = new List <Circle>();
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
Lcad.BlockUnselect(hBlockModel);
//thêm hàng lỗ khoan mới
foreach (var circle in listCircle)
{
int newHEnt = Lcad.BlockAddClone(hBlockModel, circle.GetHandle());
Lcad.BlockSelectEnt(hBlockModel, newHEnt, true);
Lcad.BlockSelMove(hBlockModel, 0, mgCircles.GetDeltaY(), false, true);
Lcad.BlockUnselect(hBlockModel);
listNewCircle.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listNewCircle);
//thêm lưới tọa độ
if (this.banVeChinh.HienKhoangCach)
{
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
DungLuoiKichThuoc();
}
//load lại
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
}
}
//private void barButtonItem13_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
//{
// if(mgCircles.GetListCircles().Count == 0)
// {
// UserControl_Notify note = new UserControl_Notify("Không có lỗ khoan");
// elementHost1.Child = note;
// note.ShowNotifyAutoHide();
// }
// else
// {
// DungLuoiKichThuoc();
// Lcad.DrwRegenViews(hDrw, 0);
// Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
// }
// this.banVeChinh.HienKhoangCach = true;
//}
private void barButtonItem_AnKhoangCach_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
this.banVeChinh.HienKhoangCach = false;
Lcad.PropPutBool(layerLuoiKichThuoc, Lcad.LC_PROP_LAYER_VISIBLE, false);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
}
private void FormMain_Load(object sender, EventArgs e)
{
//tạo cửa sổ - Windows
hWnd = Lcad.CreateWindow(panelControl_hWnd.Handle, Lcad.LC_WS_VIEWTABS, 0, 0, panelControl_hWnd.Width, panelControl_hWnd.Height);
//tạo cửa sổ - Command
hCmd = Lcad.CreateCmdwin(panelControl_hCmd.Handle, 0, 0, panelControl_hCmd.Width, panelControl_hCmd.Height);
//tạo cửa sổ - Properties
hProp = Lcad.CreatePropwin(splitContainerControl.Panel1.Handle, 0, 0, splitContainerControl.Panel1.Width, splitContainerControl.Panel1.Height);
//liên kết các cửa sổ với nhau
Lcad.WndSetCmdwin(hWnd, hCmd);
Lcad.WndSetPropwin(hWnd, hProp);
//tạo bản vẽ, gán cho cửa sổ LiteCad + đặt tên
hDrw = Lcad.CreateDrawing();
Lcad.DrwNew(hDrw, "", hWnd);
Lcad.WndSetFocus(hWnd);
//lấy giá trị hBlockModel của bản vẽ
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
//điều chỉnh kích thước
Lcad.CmdwinResize(hCmd, 0, 0, panelControl_hCmd.Width, panelControl_hCmd.Height);
Lcad.PropwinResize(hProp, 0, 0, splitContainerControl.Panel1.Width, splitContainerControl.Panel1.Height);
Lcad.WndResize(hWnd, 0, 0, panelControl_hWnd.Width, panelControl_hWnd.Height);
//thêm layer
layerLoMin = Lcad.DrwAddLayer(hDrw, "LoMin", "cyan", 0, Lcad.LC_LWEIGHT_DEFAULT);
layerLuoiKichThuoc = Lcad.DrwAddLayer(hDrw, "LuoiKichThuoc", "foreground", 0, Lcad.LC_LWEIGHT_DEFAULT);
//vẽ lại hình
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_REGEN, 0);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.Initialize();
}
//mở bản vẽ
private void barButtonItem_OpenFile_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
try
{
//filename = Lcad.DgGetFileName(panelControl_hWnd.Handle, Lcad.LC_DG_SELFILE);
OpenFileDialog filename = new OpenFileDialog();
filename.Title = "Open file LiteCAD";
filename.Filter = "Drawing liteCAD|*.lcd;*.dwg;*.dxf;*.shp|all file|*.*";
if (filename.ShowDialog() == System.Windows.Forms.DialogResult.OK)
{
if (filename.FileName != "")
{
this.hoChieuChinh = new HoChieu();
this.banVeChinh = new BanVe();
//this.banVeChinh.HienKhoangCach = false;
this.Text = "Bản vẽ: [" + filename.FileName + "]";
Lcad.DrwLoad(hDrw, filename.FileName, this.Handle, hWnd);
layerLoMin = Lcad.DrwAddLayer(hDrw, "LoMin", "cyan", 0, Lcad.LC_LWEIGHT_DEFAULT);
layerLuoiKichThuoc = Lcad.DrwAddLayer(hDrw, "LuoiKichThuoc", "foreground", 0, Lcad.LC_LWEIGHT_DEFAULT);
GetCirlcesFromAutocadFile();
Lcad.DrwRegenViews(hDrw, 0);
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Bản vẽ sẵn sàng");
}
}
}
catch
{
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Không hiển thị được bản vẽ");
}
}
//tính toán khoanh vùng
private void KhoanhVungLoKhoan()
{
if (mgCircles.GetListCircles().Count == 0)
{
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Không có lỗ khoan");
}
else
{
double xMax, xMin, yMax, yMin;
if (xFirstPoint > xLastPoint)
{
xMax = xFirstPoint;
xMin = xLastPoint;
}
else
{
xMax = xLastPoint;
xMin = xFirstPoint;
}
if (yFirstPoint > yLastPoint)
{
yMax = yFirstPoint;
yMin = yLastPoint;
}
else
{
yMax = yLastPoint;
yMin = yFirstPoint;
}
List <Circle> listCircle = mgCircles.GetListCircles();
List <Circle> listRemoveCircle = new List <Circle>();
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
foreach (Circle value in listCircle)
{
if (value.GetX() > xMax || value.GetX() < xMin || value.GetY() > yMax || value.GetY() < yMin)
{
listRemoveCircle.Add(value);
Lcad.BlockSelectEnt(hBlockModel, value.GetHandle(), true);
Lcad.BlockSelErase(hBlockModel);
Lcad.BlockUnselect(hBlockModel);
}
}
//xóa danh sách nằm ngoài
mgCircles.RemoveListCircles(listRemoveCircle);
//vẽ lại lưới tọa độ
if (this.banVeChinh.HienKhoangCach) //sau them dk vao day
{
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
DungLuoiKichThuoc();
}
//load lại
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
SendKeys.Send("{ESC}");
}
}
private void loadFile_FormMoBanVeDatabase(String idHoChieu)
{
this.hoChieuChinh = BS_HoChieu.HoChieu(idHoChieu);
this.banVeChinh = BS_BanVe.BanVe(this.hoChieuChinh.MaBanVe);
List <LoKhoan> danhSachLoKhoan = BS_LoKhoan.DanhSachLoKhoan(idHoChieu);
List <Circle> danhSachCircle = new List <Circle>();
mgCircles = new ManageCircle();
//dựng bản vẽ mới
//this.banVeChinh.HienKhoangCach = false;
this.Text = "Bản vẽ: [" + this.banVeChinh.TenBanVe + "]";
Lcad.DrwLoad(hDrw, BS_Template.ChonTemplate(this.banVeChinh.Template).DuongDan, this.Handle, hWnd);
layerLoMin = Lcad.DrwAddLayer(hDrw, "LoMin", "cyan", 0, Lcad.LC_LWEIGHT_DEFAULT);
layerLuoiKichThuoc = Lcad.DrwAddLayer(hDrw, "LuoiKichThuoc", "foreground", 0, Lcad.LC_LWEIGHT_DEFAULT);
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
foreach (LoKhoan value in danhSachLoKhoan)
{
int hEntCircle = Lcad.BlockAddCircle(hBlockModel, value.ToaDoX, value.ToaDoY, value.BanKinh, false);
Lcad.PropPutInt(hEntCircle, Lcad.LC_PROP_ENT_ID, int.Parse(value.MaLoKhoan));
Lcad.PropPutInt(hEntCircle, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.PropPutStr(hEntCircle, Lcad.LC_PROP_ENT_LAYER, "LoMin");
danhSachCircle.Add(new Circle(hEntCircle));
}
mgCircles.AddListCircle(danhSachCircle);
if (banVeChinh.HienKhoangCach)
{
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
DungLuoiKichThuoc();
}
//vẽ lại hình
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, this.banVeChinh.TenBanVe + " - đã mở");
//mở form dựng lưới lỗ khoan
if (mgCircles.GetListCircles().Count == 0)
{
FormXayDungLoKhoan fm = new FormXayDungLoKhoan();
fm.MyGetData = new FormXayDungLoKhoan.GetData(loadFile_FormXayDungLoKhoan);
fm.Show();
}
}
private void loadFile_FormBanVeMoi(String idHoChieu)
{
this.hoChieuChinh = BS_HoChieu.HoChieu(idHoChieu);
this.banVeChinh = BS_BanVe.BanVe(this.hoChieuChinh.MaBanVe);
mgCircles = new ManageCircle();
//dựng bản vẽ mới
this.Text = "Hộ chiếu: [" + this.hoChieuChinh.TenHoChieu + "]";
Lcad.DrwLoad(hDrw, BS_Template.ChonTemplate(this.banVeChinh.Template).DuongDan, this.Handle, hWnd);
layerLoMin = Lcad.DrwAddLayer(hDrw, "LoMin", "cyan", 0, Lcad.LC_LWEIGHT_DEFAULT);
layerLuoiKichThuoc = Lcad.DrwAddLayer(hDrw, "LuoiKichThuoc", "foreground", 0, Lcad.LC_LWEIGHT_DEFAULT);
//vẽ lại hình
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
//mở form dựng lưới lỗ khoan
if (mgCircles.GetListCircles().Count == 0)
{
FormXayDungLoKhoan fm = new FormXayDungLoKhoan();
fm.MyGetData = new FormXayDungLoKhoan.GetData(loadFile_FormXayDungLoKhoan);
fm.Show();
}
}
//
private void barButtonItem_HoChieuNoMin_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
{
Lcad.PropPutInt(hDrw, Lcad.LC_PROP_DRW_COLORBACKM, int.Parse("FFFFFF", System.Globalization.NumberStyles.HexNumber));
Lcad.PropPutInt(hDrw, Lcad.LC_PROP_DRW_COLORFOREM, int.Parse("000000", System.Globalization.NumberStyles.HexNumber));
Lcad.PropPutStr(layerLoMin, Lcad.LC_PROP_LAYER_COLOR, "blue");
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_REGEN, 0);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.Initialize();
int hView = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_VIEW);
String fullPath = Path.GetFullPath(Path.Combine((@"" + Application.StartupPath), @"..\..\"));
Lcad.ViewRasterize(hView, fullPath + "Template\\ViewTemp.bmp", 0, 0, 0, 0, 10);
Lcad.PropPutInt(hDrw, Lcad.LC_PROP_DRW_COLORBACKM, int.Parse("000000", System.Globalization.NumberStyles.HexNumber));
Lcad.PropPutInt(hDrw, Lcad.LC_PROP_DRW_COLORFOREM, int.Parse("FFFFFF", System.Globalization.NumberStyles.HexNumber));
Lcad.PropPutStr(layerLoMin, Lcad.LC_PROP_LAYER_COLOR, "cyan");
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_REGEN, 0);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.Initialize();
FormBaoCaoThongKe fm = new FormBaoCaoThongKe(hoChieuChinh);
fm.Show();
}
private void MouseDblClkProc_XayDungLuoiLoMin(int hWnd, int Button, int Flags, int Xwin, int Ywin, double Xdrw, double Ydrw)
{
int hBlockModel = Lcad.PropGetHandle(hDrw, Lcad.LC_PROP_DRW_BLOCK_MODEL);
if (mgCircles == null)
{
mgCircles = new ManageCircle();
}
else
{
Lcad.LayerClear(layerLoMin, hBlockModel);
Lcad.LayerClear(layerLuoiKichThuoc, hBlockModel);
mgCircles = new ManageCircle();
}
int hEntCircle = Lcad.BlockAddCircle(hBlockModel, Xdrw, Ydrw, banKinh, false);
Lcad.PropPutInt(hEntCircle, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.PropPutStr(hEntCircle, Lcad.LC_PROP_ENT_LAYER, "LoMin");
Lcad.BlockUnselect(hBlockModel);
//tạo danh sách cột đầu tiên
List <Circle> listCotDau = new List <Circle>();
Circle root = new Circle(hEntCircle);
listCotDau.Add(root);
//tạo cột đầu tiên từ điểm gốc (số điểm trong cột ứng với số hàng trừ đi điểm gốc)
for (int i = 0; i < soHang - 1; i++)
{
int newHEnt = Lcad.BlockAddClone(hBlockModel, listCotDau[i].GetHandle());
Lcad.PropPutInt(newHEnt, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.BlockSelectEnt(hBlockModel, newHEnt, true);
Lcad.BlockSelMove(hBlockModel, 0, khoangCachHang, false, true);
Lcad.BlockUnselect(hBlockModel);
listCotDau.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotDau);
//thêm các cột còn lại (ứng với số cột trừ đi cột đầu)
for (int i = 0; i < soCot - 1; i++)
{
List <Circle> listCotGanNhat = new List <Circle>();
List <Circle> listCotMoi = new List <Circle>();
if (khoangCachCot > 0)
{
listCotGanNhat = mgCircles.GetListCirleOfLastColumn();
}
else
{
listCotGanNhat = mgCircles.GetListCirleOfFirstColumn();
}
foreach (var circle in listCotGanNhat)
{
int newHEnt = Lcad.BlockAddClone(hBlockModel, circle.GetHandle());
Lcad.PropPutInt(newHEnt, Lcad.LC_PROP_ENT_KEY, keyCircle);
Lcad.BlockSelectEnt(hBlockModel, newHEnt, true);
Lcad.BlockSelMove(hBlockModel, khoangCachCot, 0, false, true);
Lcad.BlockUnselect(hBlockModel);
listCotMoi.Add(new Circle(newHEnt));
}
mgCircles.AddListCircle(listCotMoi);
}
//hiển thị lưới kích thước
if (this.banVeChinh.HienKhoangCach)
{
DungLuoiKichThuoc();
}
//load lại
//MessageBox.Show("hang" + soHang + "\ncot" + soCot + "\nkc hang" + khoangCachHang + "\nkc cot" + khoangCachCot + "\nX" + Xdrw + "\nY" + Ydrw);
Lcad.DrwRegenViews(hDrw, 0);
Lcad.WndExeCommand(hWnd, Lcad.LC_CMD_ZOOM_EXT, 0);
Lcad.OnEventMouseDblClk(_EventMouseDbclick_LoMin);
LuuHoChieu(this.hoChieuChinh.MaHoChieu); //ăn gian...
BS_LiteCAD.ShowNotifyAutoHide(elementHost1, "Xây dựng lưới lỗ khoan - hoàn thành");
}
