//private void MesUploadProc()
//{
// try
// {
// //按照MES工艺路线要求，又考虑到实际工位布局顺序跟MES工艺路线并不一致，确定如下上传顺序：
// //气密2-零秒点火-气密1,3->一次试火->二次试火->外观检测->包装下线
// //MES工位顺序：RQ-ZA041->RQ-ZA030->RQ-ZA040->RQ-ZA050,RQ-ZA051,RQ-ZA052,RQ-ZA053->RQ-ZA060->RQ-ZA070->RQ-ZA080
// //1 先传RQ-ZA041
// string[] mesProcessSeq = new string[] { "RQ-ZA041", "RQ-ZA030", "RQ-ZA040", "RQ-ZA050", "RQ-ZA051", "RQ-ZA052", "RQ-ZA053", "RQ-ZA060", "RQ-ZA070"};
// string[] fireTryA = new string[]{ "RQ-ZA050", "RQ-ZA051", "RQ-ZA052", "RQ-ZA053"};
// List<string> strConditions = new List<string>();
// for(int i=0;i<mesProcessSeq.Count();i++)
// {
// strConditions.Add(string.Format("UPLOAD_FLAG = 0 and STEP_NUMBER='{0}' order by TRX_TIME asc",mesProcessSeq[i]));
// }
// for(int i=0;i<strConditions.Count;i++)
// {
// string strWhere = strConditions[i];
// List<LOCAL_MES_STEP_INFOModel> models = localMesBasebll.GetModelList(strWhere);
// if(models == null || models.Count()<1)
// {
// continue;
// }
// if(0==i)
// {
// foreach (LOCAL_MES_STEP_INFOModel m in models)
// {
// UploadMesbasicData(m);
// }
// }
// else
// {
// foreach (LOCAL_MES_STEP_INFOModel m in models)
// {
// //检测上道工艺是否上传完成
// string strCheckWhere = "";
// if ("RQ-ZA040" == mesProcessSeq[i]) //气密1,3
// {
// //要求气密1,3都检测完一起上传
// string strCond1 = string.Format("UPLOAD_FLAG=0 and SERIAL_NUMBER='{0}' and AutoStationName='气密检查1'", m.SERIAL_NUMBER);
// string strCond2 = string.Format("UPLOAD_FLAG=0 and SERIAL_NUMBER='{0}' and AutoStationName='气密检查3'", m.SERIAL_NUMBER);
// if((!localMesBasebll.ExistByCondition(strCond1)) || (!localMesBasebll.ExistByCondition(strCond2)))
// {
// continue;
// }
// strCheckWhere = string.Format("UPLOAD_FLAG = 1 and STEP_NUMBER='{0}' and SERIAL_NUMBER='{1}' order by TRX_TIME asc", mesProcessSeq[i - 1], m.SERIAL_NUMBER);
// }
// else if (fireTryA.Contains(mesProcessSeq[i])) //一次试火
// {
// strCheckWhere = string.Format("UPLOAD_FLAG = 1 and STEP_NUMBER='{0}' and SERIAL_NUMBER='{1}' order by TRX_TIME asc", "RQ-ZA040", m.SERIAL_NUMBER);
// }
// else if ("RQ-ZA060"==mesProcessSeq[i]) //二次试火
// {
// strCheckWhere = string.Format("UPLOAD_FLAG = 1 and (STEP_NUMBER='RQ-ZA050' or STEP_NUMBER='RQ-ZA051' or STEP_NUMBER='RQ-ZA052' or STEP_NUMBER='RQ-ZA053') and SERIAL_NUMBER='{0}' order by TRX_TIME asc", m.SERIAL_NUMBER);
// }
// else
// {
// strCheckWhere = string.Format("UPLOAD_FLAG = 1 and STEP_NUMBER='{0}' and SERIAL_NUMBER='{1}' order by TRX_TIME asc", mesProcessSeq[i-1],m.SERIAL_NUMBER);
// }
// // List<LOCAL_MES_STEP_INFOModel> preuploadModels = localMesBasebll.GetModelList(strCheckWhere);
// if (localMesBasebll.ExistByCondition(strCheckWhere))
// {
// UploadMesbasicData(m);
// }
// else
// {
// continue;
// }
// }
// }
// }
// //logRecorder.AddDebugLog(this.objectName,"MES 数据上传测试!");
// for (int i = 0; i < strConditions.Count; i++)
// {
// string strWhere = strConditions[i];
// List<LOCAL_MES_STEP_INFO_DETAILModel> models = localMesDetailbll.GetModelList(strWhere);
// if (models == null || models.Count() < 1)
// {
// continue;
// }
// if (0==i)
// {
// foreach (LOCAL_MES_STEP_INFO_DETAILModel m in models)
// {
// UploadMesdetailData(m);
// }
// }
// else
// {
// foreach (LOCAL_MES_STEP_INFO_DETAILModel m in models)
// {
// //检测上道工艺是否上传完成
// string strCheckWhere = "";
// if ("RQ-ZA040" == mesProcessSeq[i]) //气密1,3
// {
// //要求气密1,3都检测完一起上传
// string strCond1 = string.Format("UPLOAD_FLAG=0 and SERIAL_NUMBER='{0}' and AutoStationName='气密检查1'", m.SERIAL_NUMBER);
// string strCond2 = string.Format("UPLOAD_FLAG=0 and SERIAL_NUMBER='{0}' and AutoStationName='气密检查3'", m.SERIAL_NUMBER);
// if(!localMesDetailbll.ExistByCondition(strCond1) || (!localMesDetailbll.ExistByCondition(strCond2)))
// {
// continue;
// }
// }
// else if (fireTryA.Contains(mesProcessSeq[i]))
// {
// strCheckWhere = string.Format("UPLOAD_FLAG = 1 and STEP_NUMBER='{0}' and SERIAL_NUMBER='{1}' order by TRX_TIME asc", "RQ-ZA040", m.SERIAL_NUMBER);
// }
// else if (mesProcessSeq[i] == "RQ-ZA060")
// {
// strCheckWhere = string.Format("UPLOAD_FLAG = 1 and (STEP_NUMBER='RQ-ZA050' or STEP_NUMBER='RQ-ZA051' or STEP_NUMBER='RQ-ZA052' or STEP_NUMBER='RQ-ZA053') and SERIAL_NUMBER='{0}' order by TRX_TIME asc", m.SERIAL_NUMBER);
// }
// else
// {
// strCheckWhere = string.Format("UPLOAD_FLAG = 1 and STEP_NUMBER='{0}' and SERIAL_NUMBER='{1}' order by TRX_TIME asc", mesProcessSeq[i - 1], m.SERIAL_NUMBER);
// }
// if (localMesDetailbll.ExistByCondition(strCheckWhere))
// {
// UploadMesdetailData(m);
// }
// else
// {
// continue;
// }
// }
// }
// }
// }
// catch (Exception ex)
// {
// logRecorder.AddLog(new LogModel(objectName, ex.ToString(), EnumLoglevel.错误));
// }
//}
//private void UploadMesbasicData(LOCAL_MES_STEP_INFOModel m)
//{
// if (mesDA.MesBaseExist(m.RECID))
// {
// m.UPLOAD_FLAG = true;
// localMesBasebll.Update(m);
// return;
// }
// FT_MES_STEP_INFOModel ftM = new FT_MES_STEP_INFOModel();
// ftM.CHECK_RESULT = m.CHECK_RESULT;
// ftM.DEFECT_CODES = m.DEFECT_CODES;
// ftM.LAST_MODIFY_TIME = System.DateTime.Now; //m.LAST_MODIFY_TIME;
// ftM.REASON = m.REASON;
// ftM.RECID = m.RECID;
// ftM.SERIAL_NUMBER = m.SERIAL_NUMBER;
// ftM.STATUS = m.STATUS;
// ftM.STEP_MARK = m.STEP_MARK;
// ftM.STEP_NUMBER = m.STEP_NUMBER;
// ftM.TRX_TIME = System.DateTime.Now;//m.TRX_TIME;
// ftM.USER_NAME = m.USER_NAME;
// mesDA.AddMesBaseinfo(ftM);
// logRecorder.AddDebugLog(objectName, string.Format("上传基本数据到MES成功,条码：{0},工位：{1}", ftM.SERIAL_NUMBER, ftM.STEP_NUMBER));
// m.UPLOAD_FLAG = true;
// localMesBasebll.Update(m);
//}
private void UploadMesdetailData(LOCAL_MES_STEP_INFO_DETAILModel m)
{
if (mesDA.MesDetailExist(m.RECID))
{
m.UPLOAD_FLAG = true;
localMesDetailbll.Update(m);
return;
}
FT_MES_STEP_INFO_DETAILModel ftM = new FT_MES_STEP_INFO_DETAILModel();
ftM.DATA_NAME = m.DATA_NAME;
ftM.DATA_VALUE = m.DATA_VALUE;
ftM.LAST_MODIFY_TIME = System.DateTime.Now; //m.LAST_MODIFY_TIME;
ftM.RECID = m.RECID;
ftM.SERIAL_NUMBER = m.SERIAL_NUMBER;
ftM.STATUS = m.STATUS;
ftM.STEP_NUMBER = m.STEP_NUMBER;
ftM.TRX_TIME = System.DateTime.Now;// m.TRX_TIME;
mesDA.AddMesDetailinfo(ftM);
logRecorder.AddDebugLog(objectName, string.Format("上传详细数据到MES成功,条码：{0},工位：{1}", ftM.SERIAL_NUMBER, ftM.STEP_NUMBER));
m.UPLOAD_FLAG = true;
localMesDetailbll.Update(m);
}
protected bool AsyUploadMesdata(string productBarcode, string[] mesProcessSeq, ref string reStr)
{
try
{
// int uploadDelay = 2000;//上传延迟5秒
List <string> strConditions = new List <string>();
for (int i = 0; i < mesProcessSeq.Count(); i++)
{
strConditions.Add(string.Format("SERIAL_NUMBER='{0}' and UPLOAD_FLAG = 0 and STEP_NUMBER='{1}' order by TRX_TIME asc", productBarcode, mesProcessSeq[i]));
string strWhere = strConditions[i];
List <LOCAL_MES_STEP_INFOModel> models = localMesBasebll.GetModelList(strWhere);
if (models == null || models.Count() < 1)
{
continue;
}
string process = mesProcessSeq[i];
if (process == "RQ-ZA240")
{
if (models.Count() > 1)
{
LOCAL_MES_STEP_INFOModel model1 = models[0];
LOCAL_MES_STEP_INFOModel model2 = models[1];
LOCAL_MES_STEP_INFOModel uploadM = model1.Clone() as LOCAL_MES_STEP_INFOModel;
if (model1.CHECK_RESULT == 1 || model2.CHECK_RESULT == 1)
{
uploadM.CHECK_RESULT = 1;
if (model1.CHECK_RESULT == 1 && model2.CHECK_RESULT == 1)
{
uploadM.DEFECT_CODES += (";" + model2.DEFECT_CODES);
}
else if (model2.CHECK_RESULT == 1)
{
uploadM.DEFECT_CODES = model2.DEFECT_CODES;
}
}
if (!UploadMesbasicData(uploadM))
{
return(false);
}
model1.UPLOAD_FLAG = true;
model2.UPLOAD_FLAG = true;
localMesBasebll.Update(model1);
localMesBasebll.Update(model2);
//Thread.Sleep(uploadDelay);
}
else if (models.Count() == 1)
{
if (!UploadMesbasicData(models[0]))
{
return(false);
}
models[0].UPLOAD_FLAG = true;
localMesBasebll.Update(models[0]);
// Thread.Sleep(uploadDelay);
}
}
else
{
foreach (LOCAL_MES_STEP_INFOModel m in models)
{
if (!UploadMesbasicData(m))
{
return(false);
}
m.UPLOAD_FLAG = true;
localMesBasebll.Update(m);
// Thread.Sleep(uploadDelay);
}
}
}
//for (int i = 0; i < strConditions.Count; i++)
//{
//}
for (int i = 0; i < strConditions.Count; i++)
{
string strWhere = strConditions[i];
List <LOCAL_MES_STEP_INFO_DETAILModel> models = localMesDetailbll.GetModelList(strWhere);
if (models == null || models.Count() < 1)
{
continue;
}
string process = mesProcessSeq[i];
if (process == "RQ-ZA240")
{
if (models.Count() > 1)
{
LOCAL_MES_STEP_INFO_DETAILModel model1 = models[0];
LOCAL_MES_STEP_INFO_DETAILModel model2 = models[1];
LOCAL_MES_STEP_INFO_DETAILModel uploadM = model1.Clone() as LOCAL_MES_STEP_INFO_DETAILModel;
uploadM.DATA_VALUE += (";" + model2.DATA_VALUE);
if (!UploadMesdetailData(uploadM))
{
return(false);
}
model1.UPLOAD_FLAG = true;
model2.UPLOAD_FLAG = true;
localMesDetailbll.Update(model1);
localMesDetailbll.Update(model2);
// Thread.Sleep(uploadDelay);
}
else if (models.Count() == 1)
{
if (!UploadMesdetailData(models[0]))
{
return(false);
}
models[0].UPLOAD_FLAG = true;
localMesDetailbll.Update(models[0]);
// Thread.Sleep(uploadDelay);
}
}
else
{
foreach (LOCAL_MES_STEP_INFO_DETAILModel m in models)
{
if (!UploadMesdetailData(m))
{
return(false);
}
m.UPLOAD_FLAG = true;
localMesDetailbll.Update(m);
// Thread.Sleep(uploadDelay);
}
}
}
return(true);
}
catch (Exception ex)
{
reStr = ex.ToString();
this.ThrowErrorStat(ex.ToString(), EnumNodeStatus.设备故障);
return(false);
}
}