public int EditModel(IModel model)
{
LLEDA objModel = (LLEDA)model;
//编写带参数的SQL语句
StringBuilder sqlBuilder = new StringBuilder();
sqlBuilder.Append("Update LLEDA set Length=@Length where LLEDAId=@LLEDAId");
//定义参数数组
SqlParameter[] param = new SqlParameter[]
{
new SqlParameter("@Length", objModel.Length),
new SqlParameter("@LLEDAId", objModel.LLEDAId)
};
try
{
return(SQLHelper.Update(sqlBuilder.ToString(), param));
}
catch (SqlException ex)
{
throw new Exception("数据库操作出现异常：" + ex.Message);
}
catch (Exception ex)
{
throw ex;
}
}
public FrmLLEDA(Drawing drawing, ModuleTree tree) : this()
{
objLLEDA = (LLEDA)objLLEDAService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
if (objLLEDA == null)
{
return;
}
this.Text = drawing.ODPNo + " / Item: " + drawing.Item + " / Module: " + tree.Module + " - " + tree.CategoryName;
Category objCategory = objCategoryService.GetCategoryByCategoryId(tree.CategoryId.ToString());
pbModelImage.Image = objCategory.ModelImage.Length == 0
? Image.FromFile("NoPic.png")
: (Image) new SerializeObjectToString().DeserializeObject(objCategory.ModelImage);
FillData();
}
public IModel GetModelByWhereSql(string whereSql)
{
string sql =
"select LLEDAId,ModuleTreeId,Length from LLEDA";
sql += whereSql;
SqlDataReader objReader = SQLHelper.GetReader(sql);
LLEDA objModel = null;
if (objReader.Read())
{
objModel = new LLEDA()
{
LLEDAId = Convert.ToInt32(objReader["LLEDAId"]),
ModuleTreeId = Convert.ToInt32(objReader["ModuleTreeId"]),
//最好不要用=null去判断，提示类型转换错误
Length = objReader["Length"].ToString().Length == 0 ? 0 : Convert.ToDecimal(objReader["Length"])
};
}
objReader.Close();
return(objModel);
}
private void btnEditData_Click(object sender, EventArgs e)
{
//必填项目
if (pbModelImage.Tag.ToString().Length == 0)
{
return;
}
if (!DataValidate.IsDecimal(txtLength.Text.Trim()) || Convert.ToDecimal(txtLength.Text.Trim()) < 200m)
{
MessageBox.Show("请认真检查灯腔侧板总长", "提示信息");
txtLength.Focus();
txtLength.SelectAll();
return;
}
//封装对象
LLEDA objLLEDA = new LLEDA()
{
LLEDAId = Convert.ToInt32(pbModelImage.Tag),
Length = Convert.ToDecimal(txtLength.Text.Trim())
};
//提交修改
try
{
if (objLLEDAService.EditModel(objLLEDA) == 1)
{
MessageBox.Show("制图数据修改成功", "提示信息");
this.DialogResult = DialogResult.OK;
this.Close();
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
public void AutoDrawing(SldWorks swApp, ModuleTree tree, string projectPath)
{
//创建项目模型存放地址
string itemPath = projectPath + @"\" + tree.Module + "-" + tree.CategoryName;
if (!Directory.Exists(itemPath))
{
Directory.CreateDirectory(itemPath);
}
else
{
DialogResult result =
MessageBox.Show("模型文件夹" + itemPath + "存在，如果之前pack已经执行过，将不执行pack过程而是直接修改模型，如果要继续请点击YES，否请点击No中断作图", "提示信息",
MessageBoxButtons.YesNo);
if (result == DialogResult.No)
{
return;
}
}
//Pack的后缀
string suffix = tree.Module + "-" + tree.ODPNo.Substring(tree.ODPNo.Length - 6);
//判断文件是否存在，如果存在将不执行pack，如果不存在则执行pack
//packango后需要接收打包完成的地址，参数为后缀
string packedAssyPath = itemPath + @"\" + tree.CategoryName.ToLower() + "_" + suffix + ".sldasm";
if (!File.Exists(packedAssyPath))
{
packedAssyPath = CommonFunc.PackAndGoFunc(suffix, swApp, tree.ModelPath, itemPath);
}
//查询参数
LLEDA item = (LLEDA)objLLEDAService.GetModelByModuleTreeId(tree.ModuleTreeId.ToString());
swApp.CommandInProgress = true; //告诉SolidWorks，现在是用外部程序调用命令
int warnings = 0;
int errors = 0;
suffix = "_" + suffix;//后缀
ModelDoc2 swModel = default(ModelDoc2);
ModelDoc2 swPart = default(ModelDoc2);
AssemblyDoc swAssy = default(AssemblyDoc);
Component2 swComp;
Feature swFeat = default(Feature);
object configNames = null;
ModelDocExtension swModelDocExt = default(ModelDocExtension);
bool status = false;
string compReName = string.Empty;
//打开Pack后的模型
swModel = swApp.OpenDoc6(packedAssyPath, (int)swDocumentTypes_e.swDocASSEMBLY,
(int)swOpenDocOptions_e.swOpenDocOptions_Silent, "", ref errors, ref warnings) as ModelDoc2;
swAssy = swModel as AssemblyDoc; //装配体
string assyName = swModel.GetTitle().Substring(0, swModel.GetTitle().Length - 7); //获取装配体名称
swModelDocExt = (ModelDocExtension)swModel.Extension;
//打开装配体后必须重建，使Pack后的零件名都更新到带后缀的状态，否则程序出错
swModel.ForceRebuild3(true);
//TopOnly参数设置成true，只重建顶层，不重建零件内部
/*注意SolidWorks单位是m，计算是应当/1000m
* 整形与整形运算得出的结果仍然时整形，1640 / 1000m结果为0，因此必须将其中一个转化成decimal型，使用后缀m就可以了
* (int)不进行四舍五入，Convert.ToInt32会四舍五入
*/
//-----------计算中间值，----------
int stdPanelNo = (int)((item.Length - 300.5m) / 1500m);//1500+300直接做成一块
decimal sideLength = item.Length - stdPanelNo * 1500m;
int ledNo = (int)((sideLength - 300m) / 500m);
try
{
//----------Top Level----------
swModel.Parameter("D1@Distance3").SystemValue = item.Length / 1000m;
//----------边缘板----------
//重命名装配体内部
compReName = "FNCL0021[LLEDA-" + tree.Module + "]{" + (int)sideLength + "}";
status = swModelDocExt.SelectByID2(CommonFunc.AddSuffix(suffix, "FNCL0021[LLEDA-]{}-2") + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
if (status)
{
swModelDocExt.RenameDocument(compReName);
}
swModel.ClearSelection2(true);
status = swModelDocExt.SelectByID2(compReName + "-2" + "@" + assyName, "COMPONENT", 0, 0, 0, false, 0, null, 0);
swModel.ClearSelection2(true);
if (status)
{
swComp = swAssy.GetComponentByName(compReName + "-2");
swPart = swComp.GetModelDoc2(); //打开零件
swPart.Parameter("D2@Skizze1").SystemValue = sideLength / 1000m;
swFeat = swComp.FeatureByName("LPattern1");
if (ledNo > 0)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swPart.Parameter("D1@LPattern1").SystemValue = ledNo + 1;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
}
//----------标准板----------
if (stdPanelNo > 0)
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCL0020[LLEDA-STD]{1483}-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-1"));
swComp.SetSuppression2(2); //2解压缩，0压缩.
}
else
{
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "FNCL0020[LLEDA-STD]{1483}-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
swComp = swAssy.GetComponentByName(CommonFunc.AddSuffix(suffix, "2200600003-1"));
swComp.SetSuppression2(0); //2解压缩，0压缩.
}
swFeat = swAssy.FeatureByName("LocalLPattern1");
if (stdPanelNo > 1)
{
swFeat.SetSuppression2(1, 2, configNames); //参数1：1解压，0压缩
swModel.Parameter("D1@LocalLPattern1").SystemValue = stdPanelNo;
}
else
{
swFeat.SetSuppression2(0, 2, configNames); //参数1：1解压，0压缩
}
swModel.ForceRebuild3(true); //设置成true，直接更新顶层，速度很快，设置成false，每个零件都会更新，很慢
swModel.Save(); //保存，很耗时间
swApp.CloseDoc(packedAssyPath); //关闭，很快
}
catch (Exception ex)
{
throw new Exception(packedAssyPath + "作图过程发生异常，详细：" + ex.Message);
}
finally
{
swApp.CommandInProgress = false; //及时关闭外部命令调用，否则影响SolidWorks的使用
}
}