Dictionary <Bitmap, float> imageintensities = new Dictionary <Bitmap, float>(); // cached
// return right bottom of area used from curpos
Point DrawNode(List <ExtPictureBox.ImageElement> pc,
StarScan.ScanNode sn,
MaterialCommoditiesList curmats, // curmats may be null
HistoryList hl,
Image notscanned, // image if sn is not known
Point position, // position is normally left/middle, unless xiscentre is set.
bool xiscentre,
out Rectangle imagepos,
Size size, // nominal size
DrawLevel drawtype, // drawing..
Color?backwash = null, // optional back wash on image
string appendlabeltext = "" // any label text to append
)
{
string tip;
Point endpoint = position;
imagepos = Rectangle.Empty;
JournalScan sc = sn.ScanData;
if (sc != null && (!sc.IsEDSMBody || CheckEDSM)) // has a scan and its our scan, or we are showing EDSM
{
if (sn.NodeType != StarScan.ScanNodeType.ring) // not rings
{
tip = sc.DisplayString(historicmatlist: curmats, currentmatlist: hl.GetLast?.MaterialCommodity);
if (sn.Signals != null)
{
tip += "\n" + "Signals".T(EDTx.ScanDisplayUserControl_Signals) + ":\n" + JournalSAASignalsFound.SignalList(sn.Signals, 4, "\n");
}
Bitmap nodeimage = (Bitmap)(sc.IsStar ? sc.GetStarTypeImage() : sc.GetPlanetClassImage());
string overlaytext = "";
var nodelabels = new string[2] {
"", ""
};
nodelabels[0] = sn.CustomNameOrOwnname;
if (sc.IsEDSMBody)
{
nodelabels[0] = "_" + nodelabels[0];
}
if (sc.IsStar)
{
if (ShowStarClasses)
{
overlaytext = sc.StarClassificationAbv;
}
if (sc.nStellarMass.HasValue)
{
nodelabels[1] = nodelabels[1].AppendPrePad($"{sc.nStellarMass.Value:N2} SM", Environment.NewLine);
}
if (drawtype == DrawLevel.TopLevelStar)
{
if (sc.nAge.HasValue)
{
nodelabels[1] = nodelabels[1].AppendPrePad($"{sc.nAge.Value:N0} MY", Environment.NewLine);
}
if (ShowHabZone)
{
var habZone = sc.GetHabZoneStringLs();
if (habZone.HasChars())
{
nodelabels[1] = nodelabels[1].AppendPrePad($"{habZone}", Environment.NewLine);
}
}
}
}
else
{
if (ShowPlanetClasses)
{
overlaytext = Bodies.PlanetAbv(sc.PlanetTypeID);
}
if ((sn.ScanData.IsLandable || ShowAllG) && sn.ScanData.nSurfaceGravity != null)
{
nodelabels[1] = nodelabels[1].AppendPrePad($"{(sn.ScanData.nSurfaceGravity / JournalScan.oneGee_m_s2):N2}g", Environment.NewLine);
}
}
if (ShowDist)
{
if (drawtype != DrawLevel.MoonLevel) // other than moons
{
if (sn.ScanData.IsOrbitingBaryCentre) // if in orbit of barycentre
{
string s = $"{(sn.ScanData.DistanceFromArrivalLS):N1}ls";
if (sn.ScanData.nSemiMajorAxis.HasValue)
{
s += "/" + sn.ScanData.SemiMajorAxisLSKM;
}
nodelabels[1] = nodelabels[1].AppendPrePad(s, Environment.NewLine);
}
else
{
//System.Diagnostics.Debug.WriteLine(sn.ScanData.BodyName + " SMA " + sn.ScanData.nSemiMajorAxis + " " + sn.ScanData.DistanceFromArrivalm);
string s = sn.ScanData.nSemiMajorAxis.HasValue && Math.Abs(sn.ScanData.nSemiMajorAxis.Value - sn.ScanData.DistanceFromArrivalm) > JournalScan.oneAU_m ? (" / " + sn.ScanData.SemiMajorAxisLSKM) : "";
nodelabels[1] = nodelabels[1].AppendPrePad($"{sn.ScanData.DistanceFromArrivalLS:N1}ls" + s, Environment.NewLine);
}
}
else
{
if (!sn.ScanData.IsOrbitingBaryCentre && sn.ScanData.nSemiMajorAxis.HasValue) // if not in orbit of barycentre
{
nodelabels[1] = nodelabels[1].AppendPrePad($"{(sn.ScanData.nSemiMajorAxis / JournalScan.oneLS_m):N1}ls", Environment.NewLine);
}
}
}
nodelabels[1] = nodelabels[1].AppendPrePad(appendlabeltext, Environment.NewLine);
// nodelabels[1] = nodelabels[1].AppendPrePad("" + sn.ScanData?.BodyID, Environment.NewLine);
bool valuable = sc.EstimatedValue >= ValueLimit;
bool isdiscovered = sc.IsPreviouslyDiscovered && sc.IsPlanet;
int iconoverlays = ShowOverlays ? ((sc.Terraformable ? 1 : 0) + (sc.HasMeaningfulVolcanism ? 1 : 0) +
(valuable ? 1 : 0) + (sc.Mapped ? 1 : 0) + (isdiscovered ? 1 : 0) + (sc.IsPreviouslyMapped ? 1 : 0) +
(sn.Signals != null ? 1 : 0)) : 0;
// if (sc.BodyName.Contains("4 b")) iconoverlays = 0;
bool materialsicon = sc.HasMaterials && !ShowMaterials;
bool imageoverlays = sc.IsLandable || (sc.HasRings && drawtype != DrawLevel.TopLevelStar) || materialsicon;
int bitmapheight = size.Height * nodeheightratio / noderatiodivider;
int overlaywidth = bitmapheight / 6;
int imagewidtharea = (imageoverlays ? 2 : 1) * size.Width; // area used by image+overlay if any
int iconwidtharea = (iconoverlays > 0 ? overlaywidth : 0); // area used by icon width area on left
int bitmapwidth = iconwidtharea + imagewidtharea; // total width
int imageleft = iconwidtharea + imagewidtharea / 2 - size.Width / 2; // calculate where the left of the image is
int imagetop = bitmapheight / 2 - size.Height / 2; // and the top
Bitmap bmp = new Bitmap(bitmapwidth, bitmapheight);
using (Graphics g = Graphics.FromImage(bmp))
{
// backwash = Color.FromArgb(128, 40, 40, 40); // debug
if (backwash.HasValue)
{
using (Brush b = new SolidBrush(backwash.Value))
{
g.FillRectangle(b, new Rectangle(iconwidtharea, 0, imagewidtharea, bitmapheight));
}
}
g.DrawImage(nodeimage, imageleft, imagetop, size.Width, size.Height);
if (sc.IsLandable)
{
int offset = size.Height * 4 / 16;
int scale = 5;
g.DrawImage(Icons.Controls.Scan_Bodies_Landable, new Rectangle(imageleft + size.Width / 2 - offset * scale / 2,
imagetop + size.Height / 2 - offset * scale / 2, offset * scale, offset * scale));
}
if (sc.HasRings && drawtype != DrawLevel.TopLevelStar)
{
g.DrawImage(sc.Rings.Count() > 1 ? Icons.Controls.Scan_Bodies_RingGap : Icons.Controls.Scan_Bodies_RingOnly,
new Rectangle(imageleft - size.Width / 2, imagetop, size.Width * 2, size.Height));
}
if (iconoverlays > 0)
{
int ovsize = bmp.Height / 6;
int pos = 4;
if (sc.Terraformable)
{
g.DrawImage(Icons.Controls.Scan_Bodies_Terraformable, new Rectangle(0, pos, ovsize, ovsize));
pos += ovsize + 1;
}
if (sc.HasMeaningfulVolcanism) //this renders below the terraformable icon if present
{
g.DrawImage(Icons.Controls.Scan_Bodies_Volcanism, new Rectangle(0, pos, ovsize, ovsize));
pos += ovsize + 1;
}
if (valuable)
{
g.DrawImage(Icons.Controls.Scan_Bodies_HighValue, new Rectangle(0, pos, ovsize, ovsize));
pos += ovsize + 1;
}
if (sc.Mapped)
{
g.DrawImage(Icons.Controls.Scan_Bodies_Mapped, new Rectangle(0, pos, ovsize, ovsize));
pos += ovsize + 1;
}
if (sc.IsPreviouslyMapped)
{
g.DrawImage(Icons.Controls.Scan_Bodies_MappedByOthers, new Rectangle(0, pos, ovsize, ovsize));
pos += ovsize + 1;
}
if (isdiscovered)
{
g.DrawImage(Icons.Controls.Scan_Bodies_DiscoveredByOthers, new Rectangle(0, pos, ovsize, ovsize));
pos += ovsize + 1;
}
if (sn.Signals != null)
{
g.DrawImage(Icons.Controls.Scan_Bodies_Signals, new Rectangle(0, pos, ovsize, ovsize));
}
}
if (materialsicon)
{
Image mm = Icons.Controls.Scan_Bodies_MaterialMore;
g.DrawImage(mm, new Rectangle(bmp.Width - mm.Width, bmp.Height - mm.Height, mm.Width, mm.Height));
}
if (overlaytext.HasChars())
{
float ii;
if (imageintensities.ContainsKey(nodeimage)) // find cache
{
ii = imageintensities[nodeimage];
//System.Diagnostics.Debug.WriteLine("Cached Image intensity of " + sn.fullname + " " + ii);
}
else
{
var imageintensity = nodeimage.Function(BitMapHelpers.BitmapFunction.Brightness, nodeimage.Width * 3 / 8, nodeimage.Height * 3 / 8, nodeimage.Width * 2 / 8, nodeimage.Height * 2 / 8);
ii = imageintensity.Item2;
imageintensities[nodeimage] = ii;
//System.Diagnostics.Debug.WriteLine("Calculated Image intensity of " + sn.fullname + " " + ii);
}
Color text = ii > 0.3f ? Color.Black : Color.FromArgb(255, 200, 200, 200);
using (Font f = new Font(EDDTheme.Instance.FontName, size.Width / 5.0f))
{
using (Brush b = new SolidBrush(text))
{
g.DrawString(overlaytext, f, b, new Rectangle(iconwidtharea, 0, bitmapwidth - iconwidtharea, bitmapheight), new StringFormat()
{
Alignment = StringAlignment.Center, LineAlignment = StringAlignment.Center
});
}
}
}
}
// need left middle, if xiscentre, translate to it
Point postoplot = xiscentre ? new Point(position.X - bmp.Width / 2, position.Y) : position;
//System.Diagnostics.Debug.WriteLine("Body " + sc.BodyName + " plot at " + postoplot + " " + bmp.Size + " " + (postoplot.X+imageleft) + "," + (postoplot.Y-bmp.Height/2+imagetop));
endpoint = CreateImageAndLabel(pc, bmp, postoplot, bmp.Size, out imagepos, nodelabels, tip);
//System.Diagnostics.Debug.WriteLine("Draw {0} at {1} {2} out {3}", nodelabels[0], postoplot, bmp.Size, imagepos);
if (sc.HasMaterials && ShowMaterials)
{
Point matpos = new Point(endpoint.X + 4, position.Y);
Point endmat = CreateMaterialNodes(pc, sc, curmats, hl, matpos, materialsize);
endpoint = new Point(Math.Max(endpoint.X, endmat.X), Math.Max(endpoint.Y, endmat.Y)); // record new right point..
}
}
}
else if (sn.NodeType == StarScan.ScanNodeType.belt)
{
if (sn.BeltData != null)
{
tip = sn.BeltData.RingInformationMoons(true, "");
}
else
{
tip = sn.OwnName + Environment.NewLine + Environment.NewLine + "No scan data available".T(EDTx.ScanDisplayUserControl_NSD);
}
if (sn.Children != null && sn.Children.Count != 0)
{
foreach (StarScan.ScanNode snc in sn.Children.Values)
{
if (snc.ScanData != null)
{
string sd = snc.ScanData.DisplayString() + "\n";
tip += "\n" + sd;
}
}
}
Size bmpsize = new Size(size.Width, planetsize.Height * nodeheightratio / noderatiodivider);
endpoint = CreateImageAndLabel(pc, Icons.Controls.Scan_Bodies_Belt, position, bmpsize, out imagepos, new string[] { sn.OwnName.AppendPrePad(appendlabeltext, Environment.NewLine) }, tip, false);
}
else
{
if (sn.NodeType == StarScan.ScanNodeType.barycentre)
{
tip = string.Format("Barycentre of {0}".T(EDTx.ScanDisplayUserControl_BC), sn.OwnName);
}
else
{
tip = sn.OwnName + Environment.NewLine + Environment.NewLine + "No scan data available".T(EDTx.ScanDisplayUserControl_NSD);
}
string nodelabel = sn.CustomName ?? sn.OwnName;
nodelabel = nodelabel.AppendPrePad(appendlabeltext, Environment.NewLine);
endpoint = CreateImageAndLabel(pc, notscanned, position, size, out imagepos, new string[] { nodelabel }, tip, false);
}
// System.Diagnostics.Debug.WriteLine("Node " + sn.ownname + " " + position + " " + size + " -> "+ endpoint);
return(endpoint);
}
// return right bottom of area used from curpos
Point DrawNode(List <PictureBoxHotspot.ImageElement> pc, StarScan.ScanNode sn, Image notscanned, Point curpos,
Size size, ref int offset, bool alignhorz)
{
string tip;
Point endpoint = curpos;
int hoff = size.Height / 4;
int alignhoff = (alignhorz) ? hoff : 0;
JournalScan sc = sn.scandata;
if (sc != null)
{
tip = sc.DisplayString(true);
if (sc.IsStar)
{
endpoint = CreateImageLabel(pc, sc.GetStarTypeImage().Item1,
new Point(curpos.X + offset, curpos.Y + alignhoff),
size, sn.ownname, tip, alignhoff);
if (sc.HasRings)
{
curpos = new Point(endpoint.X + itemsepar.Width, curpos.Y);
Point endbelt = curpos;
for (int i = 0; i < sc.Rings.Length; i++)
{
string name = sc.Rings[i].Name;
if (name.Length > sn.fullname.Length && name.Substring(0, sn.fullname.Length).Equals(sn.fullname))
{
name = name.Substring(sn.fullname.Length).Trim();
}
curpos.X += 4; // a little spacing, image is tight
endbelt = CreateImageLabel(pc, EDDiscovery.Properties.Resources.Belt,
new Point(curpos.X, curpos.Y + alignhoff), new Size(size.Width / 2, size.Height), name,
sc.RingInformationMoons(i), alignhoff);
curpos = new Point(endbelt.X + itemsepar.Width, curpos.Y);
}
endpoint = new Point(curpos.X, endpoint.Y);
}
offset += size.Width / 2; // return the middle used was this..
}
else
{
bool indicatematerials = sc.HasMaterials && !checkBoxMaterials.Checked;
Image nodeimage = sc.GetPlanetClassImage();
if (sc.IsLandable || sc.HasRings || indicatematerials)
{
Bitmap bmp = new Bitmap(size.Width * 2, hoff * 6);
using (Graphics g = Graphics.FromImage(bmp))
{
g.DrawImage(nodeimage, size.Width / 2, hoff, size.Width, size.Height);
if (sc.IsLandable)
{
g.DrawImage(EDDiscovery.Properties.Resources.planet_landing, new Rectangle(hoff, 0, hoff * 6, hoff * 6));
}
if (sc.HasRings)
{
g.DrawImage(sc.Rings.Count() > 1 ? EDDiscovery.Properties.Resources.RingGap512 : EDDiscovery.Properties.Resources.Ring_Only_512,
new Rectangle(-2, hoff, size.Width * 2, size.Height));
}
if (indicatematerials)
{
Image mm = EDDiscovery.Properties.Resources.materiamoreindicator;
g.DrawImage(mm, new Rectangle(bmp.Width - mm.Width, bmp.Height - mm.Height, mm.Width, mm.Height));
}
}
endpoint = CreateImageLabel(pc, bmp, curpos, new Size(bmp.Width, bmp.Height), sn.ownname, tip, 0);
offset = size.Width; // return that the middle is now this
}
else
{
endpoint = CreateImageLabel(pc, nodeimage, new Point(curpos.X + offset, curpos.Y + alignhoff), size,
sn.ownname, tip, alignhoff);
offset += size.Width / 2;
}
if (sc.HasMaterials && checkBoxMaterials.Checked)
{
Point matpos = new Point(endpoint.X + 4, curpos.Y);
Point endmat = CreateMaterialNodes(pc, sc, matpos, materialsize);
endpoint = new Point(Math.Max(endpoint.X, endmat.X), Math.Max(endpoint.Y, endmat.Y)); // record new right point..
}
}
}
else
{
if (sn.type == StarScan.ScanNodeType.barycentre)
{
tip = "Barycentre of " + sn.ownname;
}
else
{
tip = sn.ownname + "\n\nNo scan data available";
}
endpoint = CreateImageLabel(pc, notscanned, new Point(curpos.X + offset, curpos.Y + alignhoff), size, sn.ownname, tip, alignhoff);
offset += size.Width / 2; // return the middle used was this..
}
return(endpoint);
}
// Width: Nodes are allowed 2 widths
// Height: Nodes are allowed 1.5 Heights. 0 = top, 1/2/3/4 = image, 5 = bottom.
// offset: pass in horizonal offset, return back middle of image
// aligndown : if true, compensate for drawing normal size images and ones 1.5 by shifting down the image and the label by the right amounts
// labelvoff : any additional compensation for label pos
// return right bottom of area used from curpos
Point DrawNode(List <PictureBoxHotspot.ImageElement> pc, StarScan.ScanNode sn, Image notscanned, Point curpos,
Size size, ref int offset, bool aligndown = false, int labelvoff = 0)
{
string tip;
Point endpoint = curpos;
int quarterheight = size.Height / 4;
int alignv = aligndown ? quarterheight : 0;
JournalScan sc = sn.ScanData;
//System.Diagnostics.Debug.WriteLine("Node " + sn.ownname + " " + curpos + " " + size + " hoff " + offset + " EDSM " + ((sc!= null) ? sc.IsEDSMBody.ToString() : ""));
if (sc != null && (!sc.IsEDSMBody || checkBoxEDSM.Checked)) // if got one, and its our scan, or we are showing EDSM
{
tip = sc.DisplayString();
if (sc.IsStar)
{
endpoint = CreateImageLabel(pc, sc.GetStarTypeImage().Item1,
new Point(curpos.X + offset, curpos.Y + alignv), // WE are basing it on a 1/4 + 1 + 1/4 grid, this is not being made bigger, move off
size, sn.customname ?? sn.ownname, tip, alignv + labelvoff, sc.IsEDSMBody, false); // and the label needs to be a quarter height below it..
if (sc.HasRings)
{
curpos = new Point(endpoint.X + itemsepar.Width, curpos.Y);
Point endbelt = curpos;
for (int i = 0; i < sc.Rings.Length; i++)
{
string name = sc.Rings[i].Name;
if (name.Length > sn.fullname.Length && name.Substring(0, sn.fullname.Length).Equals(sn.fullname))
{
name = name.Substring(sn.fullname.Length).Trim();
}
curpos.X += 4; // a little spacing, image is tight
endbelt = CreateImageLabel(pc, EDDiscovery.Properties.Resources.Belt,
new Point(curpos.X, curpos.Y + alignv), new Size(size.Width / 2, size.Height), name,
sc.RingInformationMoons(i), alignv + labelvoff, sc.IsEDSMBody, false);
curpos = new Point(endbelt.X + itemsepar.Width, curpos.Y);
}
endpoint = new Point(curpos.X, endpoint.Y);
}
offset += size.Width / 2; // return the middle used was this..
}
else
{
bool indicatematerials = sc.HasMaterials && !checkBoxMaterials.Checked;
Image nodeimage = sc.GetPlanetClassImage();
if ((sc.IsLandable || sc.HasRings || indicatematerials))
{
Bitmap bmp = new Bitmap(size.Width * 2, quarterheight * 6);
using (Graphics g = Graphics.FromImage(bmp))
{
g.DrawImage(nodeimage, size.Width / 2, quarterheight, size.Width, size.Height);
if (sc.IsLandable)
{
g.DrawImage(EDDiscovery.Properties.Resources.planet_landing, new Rectangle(quarterheight, 0, quarterheight * 6, quarterheight * 6));
}
if (sc.HasRings)
{
g.DrawImage(sc.Rings.Count() > 1 ? EDDiscovery.Properties.Resources.RingGap512 : EDDiscovery.Properties.Resources.Ring_Only_512,
new Rectangle(-2, quarterheight, size.Width * 2, size.Height));
}
if (indicatematerials)
{
Image mm = EDDiscovery.Properties.Resources.materiamoreindicator;
g.DrawImage(mm, new Rectangle(bmp.Width - mm.Width, bmp.Height - mm.Height, mm.Width, mm.Height));
}
}
endpoint = CreateImageLabel(pc, bmp, curpos, new Size(bmp.Width, bmp.Height), sn.customname ?? sn.ownname, tip, labelvoff, sc.IsEDSMBody);
offset = size.Width; // return that the middle is now this
}
else
{
endpoint = CreateImageLabel(pc, nodeimage, new Point(curpos.X + offset, curpos.Y + alignv), size,
sn.customname ?? sn.ownname, tip, alignv + labelvoff, sc.IsEDSMBody);
offset += size.Width / 2;
}
if (sc.HasMaterials && checkBoxMaterials.Checked)
{
Point matpos = new Point(endpoint.X + 4, curpos.Y);
Point endmat = CreateMaterialNodes(pc, sc, matpos, materialsize);
endpoint = new Point(Math.Max(endpoint.X, endmat.X), Math.Max(endpoint.Y, endmat.Y)); // record new right point..
}
}
}
else
{
if (sn.type == StarScan.ScanNodeType.barycentre)
{
tip = "Barycentre of " + sn.ownname;
}
else
{
tip = sn.ownname + "\n\nNo scan data available";
}
endpoint = CreateImageLabel(pc, notscanned, new Point(curpos.X + offset, curpos.Y + alignv), size, sn.customname ?? sn.ownname, tip, alignv + labelvoff, false);
offset += size.Width / 2; // return the middle used was this..
}
return(endpoint);
}
// Width: Nodes are allowed 2 widths
// Height: Nodes are allowed 1.5 Heights. 0 = top, 1/2/3/4 = image, 5 = bottom.
// offset: pass in horizonal offset, return back middle of image
// aligndown : if true, compensate for drawing normal size images and ones 1.5 by shifting down the image and the label by the right amounts
// labelvoff : any additional compensation for label pos
// return right bottom of area used from curpos
// curmats may be null
Point DrawNode(List <ExtPictureBox.ImageElement> pc, StarScan.ScanNode sn, MaterialCommoditiesList curmats, HistoryList hl,
Image notscanned, Point curpos,
Size size, ref int offset, bool aligndown = false, int labelvoff = 0,
bool toplevel = false)
{
string tip;
Point endpoint = curpos;
int quarterheight = size.Height / 4;
int alignv = aligndown ? quarterheight : 0;
JournalScan sc = sn.ScanData;
//System.Diagnostics.Debug.WriteLine("Node " + sn.ownname + " " + curpos + " " + size + " hoff " + offset + " EDSM " + ((sc!= null) ? sc.IsEDSMBody.ToString() : ""));
if (sc != null && (!sc.IsEDSMBody || CheckEDSM)) // if got one, and its our scan, or we are showing EDSM
{
tip = sc.DisplayString(historicmatlist: curmats, currentmatlist: hl.GetLast?.MaterialCommodity);
if (sn.type == StarScan.ScanNodeType.ring)
{
}
else if (sc.IsStar && toplevel)
{
var starLabel = sn.customname ?? sn.ownname;
var habZone = sc.GetHabZoneStringLs();
if (!string.IsNullOrEmpty(habZone))
{
starLabel += $" ({habZone})";
}
endpoint = CreateImageLabel(pc, sc.GetStarTypeImage(),
new Point(curpos.X + offset, curpos.Y + alignv), // WE are basing it on a 1/4 + 1 + 1/4 grid, this is not being made bigger, move off
size, starLabel, tip, alignv + labelvoff, sc.IsEDSMBody, false); // and the label needs to be a quarter height below it..
offset += size.Width / 2; // return the middle used was this..
}
else //else not a top-level star
{
bool indicatematerials = sc.HasMaterials && !ShowMaterials;
bool valuable = sc.EstimatedValue >= ValueLimit;
Image nodeimage = sc.IsStar ? sc.GetStarTypeImage() : sc.GetPlanetClassImage();
if (ImageRequiresAnOverlay(sc, indicatematerials, valuable))
{
Bitmap bmp = new Bitmap(size.Width * 2, quarterheight * 6);
using (Graphics g = Graphics.FromImage(bmp))
{
g.DrawImage(nodeimage, size.Width / 2, quarterheight, size.Width, size.Height);
if (sc.IsLandable)
{
g.DrawImage(Icons.Controls.Scan_Bodies_Landable, new Rectangle(quarterheight, 0, quarterheight * 6, quarterheight * 6));
}
if (sc.HasRings)
{
g.DrawImage(sc.Rings.Count() > 1 ? Icons.Controls.Scan_Bodies_RingGap : Icons.Controls.Scan_Bodies_RingOnly,
new Rectangle(-2, quarterheight, size.Width * 2, size.Height));
}
if (ShowOverlays)
{
int overlaystotal = (sc.Terraformable ? 1 : 0) + (sc.HasMeaningfulVolcanism ? 1 : 0) + (valuable ? 1 : 0) + (sc.Mapped ? 1 : 0);
int ovsize = (overlaystotal > 1) ? quarterheight : (quarterheight * 3 / 2);
int pos = 0;
if (sc.Terraformable)
{
g.DrawImage(Icons.Controls.Scan_Bodies_Terraformable, new Rectangle(0, pos, ovsize, ovsize));
pos += ovsize + 1;
}
if (sc.HasMeaningfulVolcanism) //this renders below the terraformable icon if present
{
g.DrawImage(Icons.Controls.Scan_Bodies_Volcanism, new Rectangle(0, pos, ovsize, ovsize));
pos += ovsize + 1;
}
if (valuable)
{
g.DrawImage(Icons.Controls.Scan_Bodies_HighValue, new Rectangle(0, pos, ovsize, ovsize));
pos += ovsize + 1;
}
if (sc.Mapped)
{
g.DrawImage(Icons.Controls.Scan_Bodies_Mapped, new Rectangle(0, pos, ovsize, ovsize));
}
}
if (indicatematerials)
{
Image mm = Icons.Controls.Scan_Bodies_MaterialMore;
g.DrawImage(mm, new Rectangle(bmp.Width - mm.Width, bmp.Height - mm.Height, mm.Width, mm.Height));
}
}
var nodeLabel = sn.customname ?? sn.ownname;
if (sn.ScanData.IsLandable && sn.ScanData.nSurfaceGravity != null)
{
nodeLabel += $" ({(sn.ScanData.nSurfaceGravity / JournalScan.oneGee_m_s2):N2}g)";
}
endpoint = CreateImageLabel(pc, bmp, curpos, new Size(bmp.Width, bmp.Height), nodeLabel, tip, labelvoff, sc.IsEDSMBody);
offset = size.Width; // return that the middle is now this
}
else
{
endpoint = CreateImageLabel(pc, nodeimage, new Point(curpos.X + offset, curpos.Y + alignv), size,
sn.customname ?? sn.ownname, tip, alignv + labelvoff, sc.IsEDSMBody, false);
offset += size.Width / 2;
}
if (sc.HasMaterials && ShowMaterials)
{
Point matpos = new Point(endpoint.X + 4, curpos.Y);
Point endmat = CreateMaterialNodes(pc, sc, curmats, hl, matpos, materialsize);
endpoint = new Point(Math.Max(endpoint.X, endmat.X), Math.Max(endpoint.Y, endmat.Y)); // record new right point..
}
}
}
else if (sn.type == StarScan.ScanNodeType.belt)
{
if (sn.BeltData != null)
{
tip = sn.BeltData.RingInformationMoons(true);
}
else
{
tip = sn.ownname + Environment.NewLine + Environment.NewLine + "No scan data available".T(EDTx.ScanDisplayUserControl_NSD);
}
if (sn.children != null && sn.children.Count != 0)
{
foreach (StarScan.ScanNode snc in sn.children.Values)
{
if (snc.ScanData != null)
{
tip += "\n\n" + snc.ScanData.DisplayString();
}
}
}
endpoint = CreateImageLabel(pc, Icons.Controls.Scan_Bodies_Belt,
new Point(curpos.X, curpos.Y + alignv), new Size(size.Width, size.Height), sn.ownname,
tip, alignv + labelvoff, false, false);
offset += size.Width;
}
else
{
if (sn.type == StarScan.ScanNodeType.barycentre)
{
tip = string.Format("Barycentre of {0}".T(EDTx.ScanDisplayUserControl_BC), sn.ownname);
}
else
{
tip = sn.ownname + Environment.NewLine + Environment.NewLine + "No scan data available".T(EDTx.ScanDisplayUserControl_NSD);
}
endpoint = CreateImageLabel(pc, notscanned, new Point(curpos.X + offset, curpos.Y + alignv), size, sn.customname ?? sn.ownname, tip, alignv + labelvoff, false, false);
offset += size.Width / 2; // return the middle used was this..
}
return(endpoint);
}