AcquireParameters ConfigureAcquireState(Detector det, AcquireParameters def, INCCReviewFile irf)
{
AcquireParameters acq = NC.App.DB.LastAcquireFor(det);
if (acq == null)
{
acq = new AcquireParameters(def);
}
acq.MeasDateTime = irf.dt; acq.lm.TimeStamp = irf.dt;
acq.num_runs = irf.num_runs; // RequestedRepetitions
int tx = def.comment.IndexOf(" (Original file name");
if (tx >= 0)
{
acq.comment = def.comment.Substring(0, tx);
}
else
{
acq.comment = def.comment;
}
acq.comment += " (Original file name " + System.IO.Path.GetFileName(irf.Path) + ")";
acq.detector_id = String.Copy(det.Id.DetectorId);
acq.meas_detector_id = string.Copy(acq.detector_id);
// iid should have been added from the NOP processing above
ItemId iid = NC.App.DB.ItemIds.Get(irf.item);
if (iid == null)
{
ctrllog.TraceEvent(LogLevels.Warning, 5439, "Item id '" + irf.item + "' is referenced by the Review file measurement data, but is not found in op. rev. files or the database");
}
else
{
acq.ApplyItemId(iid);
INCCDB.Descriptor s = NC.App.DB.Stratums.Get(iid.stratum);
INCCDB.Descriptor m = NC.App.DB.MBAs.Get(iid.mba);
if (s != null)
{
acq.stratum_id = s;
}
if (m != null)
{
acq.mba = m;
}
}
// todo: also need to account for iid UMass to mass condition
INCCDB.AcquireSelector sel = new INCCDB.AcquireSelector(det, acq.item_type, irf.dt);
if (NC.App.DB.AcquireParametersMap().ContainsKey(sel)) // only one allowed, same for actual measurement
{
NC.App.DB.AcquireParametersMap().Remove(sel);
}
NC.App.DB.AcquireParametersMap().Add(sel, acq);
NC.App.DB.UpdateAcquireParams(acq, det.ListMode);
return(acq);
}
AssaySelector.MeasurementOption NCCMeasOption(INCCReviewFile irf)
{
// INCC5 semantics: ASCII vV 86 118, bB 66 98, nN 78 110
AssaySelector.MeasurementOption mo = AssaySelector.MeasurementOption.unspecified;
if (irf.meas_option == 118 || irf.meas_option == 86)
{
mo = AssaySelector.MeasurementOption.verification;
}
else if (irf.meas_option == 66 || irf.meas_option == 98)
{
mo = AssaySelector.MeasurementOption.background;
}
else if (irf.meas_option == 78 || irf.meas_option == 110)
{
mo = AssaySelector.MeasurementOption.normalization;
}
return(mo);
}
unsafe void AddReviewFileCycle(int i, run_rec_ext run, INCCReviewFile.run_rec_ext_plus rrep, Measurement meas, string fn)
{
Cycle cycle = new Cycle(datalog);
try
{
cycle.UpdateDataSourceId(ConstructedSource.ReviewFile, meas.Detectors[0].Id.SRType,
rrep.dt, fn);
cycle.seq = (run.run_number > 0 ? run.run_number : i); // INCC run record sequence numbers start at 1
cycle.TS = TimeSpan.FromSeconds(run.run_count_time);
/* init run tests */
cycle.SetQCStatus(meas.Detectors[0].MultiplicityParams, QCTestStatus.Pass, run.run_high_voltage); // multmult creates entry if not found
meas.Add(cycle);
/* singles, reals + accidentals, accidentals */
cycle.Totals = (ulong)run.run_singles;
MultiplicityCountingRes mcr = new MultiplicityCountingRes(meas.Detectors[0].MultiplicityParams.FA, cycle.seq); // multmult
cycle.CountingAnalysisResults.Add(meas.Detectors[0].MultiplicityParams, mcr); // multmult
mcr.AB.TransferIntermediates(meas.Detectors[0].AB); // copy alpha beta onto the cycle's results
mcr.Totals = cycle.Totals;
mcr.TS = cycle.TS;
mcr.ASum = run.run_acc;
mcr.RASum = run.run_reals_plus_acc;
mcr.Scaler1.v = run.run_scaler1;
mcr.Scaler2.v = run.run_scaler2;
cycle.SinglesRate = run.run_singles / run.run_count_time;
// assign the hits to a single channel (0)
cycle.HitsPerChannel[0] = cycle.Totals;
mcr.RawSinglesRate.v = cycle.SinglesRate;
// now back-compute the actual limits of the bins
for (int n = rrep.n_mult - 1; n >= 0; n--)
{
if ((run.run_mult_reals_plus_acc[n] > 0.0) || (run.run_mult_acc[n] > 0.0))
{
mcr.MinBins = mcr.MaxBins = (ulong)(n + 1);
break;
}
}
mcr.RAMult = new ulong[mcr.MaxBins];
mcr.NormedAMult = new ulong[mcr.MaxBins];
mcr.UnAMult = new ulong[mcr.MaxBins]; // todo: compute this
// copy the bin values, if any
for (UInt16 j = 0; j < mcr.MaxBins; j++)
{
mcr.RAMult[j] = (ulong)run.run_mult_reals_plus_acc[j];
mcr.NormedAMult[j] = (ulong)run.run_mult_acc[j];
}
ctrllog.TraceEvent(LogLevels.Verbose, 5439, "Cycle " + cycle.seq.ToString() + (rrep.n_mult > 0 ? " n_:" + rrep.n_mult.ToString() + " max:" + mcr.MaxBins.ToString() : " *"));
}
catch (Exception e)
{
ctrllog.TraceEvent(LogLevels.Warning, 33085, "Cycle processing error {0} {1}", run, e.Message);
}
}
AssaySelector.MeasurementOption NCCMeasOption(INCCReviewFile irf)
{
// INCC5 semantics: ASCII vV 86 118, bB 66 98, nN 78 110
AssaySelector.MeasurementOption mo = AssaySelector.MeasurementOption.unspecified;
if (irf.meas_option == 118 || irf.meas_option == 86) mo = AssaySelector.MeasurementOption.verification;
else if (irf.meas_option == 66 || irf.meas_option == 98) mo = AssaySelector.MeasurementOption.background;
else if (irf.meas_option == 78 || irf.meas_option == 110) mo = AssaySelector.MeasurementOption.normalization;
return mo;
}
AcquireParameters ConfigureAcquireState(Detector det, AcquireParameters def, INCCReviewFile irf)
{
AcquireParameters acq = NC.App.DB.LastAcquireFor(det);
if (acq == null)
acq = new AcquireParameters(def);
acq.MeasDateTime = irf.dt; acq.lm.TimeStamp = irf.dt;
acq.num_runs = irf.num_runs; // RequestedRepetitions
int tx = def.comment.IndexOf(" (Original file name");
if (tx >= 0)
acq.comment = def.comment.Substring(0, tx);
else
acq.comment = def.comment;
acq.comment += " (Original file name " + System.IO.Path.GetFileName(irf.Path) + ")";
acq.detector_id = String.Copy(det.Id.DetectorId);
acq.meas_detector_id = string.Copy(acq.detector_id);
// iid should have been added from the NOP processing above
ItemId iid = NC.App.DB.ItemIds.Get(irf.item);
if (iid == null)
{
ctrllog.TraceEvent(LogLevels.Warning, 5439, "Item id '" + irf.item + "' is referenced by the Review file measurement data, but is not found in op. rev. files or the database");
}
else
{
acq.ApplyItemId(iid);
INCCDB.Descriptor s = NC.App.DB.Stratums.Get(iid.stratum);
INCCDB.Descriptor m = NC.App.DB.MBAs.Get(iid.mba);
if (s != null)
acq.stratum_id = s;
if (m != null)
acq.mba = m;
}
// todo: also need to account for iid UMass to mass condition
INCCDB.AcquireSelector sel = new INCCDB.AcquireSelector(det, acq.item_type, irf.dt);
if (NC.App.DB.AcquireParametersMap().ContainsKey(sel)) // only one allowed, same for actual measurement
{
NC.App.DB.AcquireParametersMap().Remove(sel);
}
NC.App.DB.AcquireParametersMap().Add(sel, acq);
NC.App.DB.UpdateAcquireParams(acq, det.ListMode);
return acq;
}
public virtual INCCTransferBase Restore()
{
// current file
INCCTransferBase result = null;
switch (mft)
{
case eFileType.eInitialDataDetector:
{
INCCInitialDataDetectorFile idd = new INCCInitialDataDetectorFile(mlogger, mpath);
bool good = idd.Restore(mpath);
if (good)
result = idd; // this now has the structs ready
}
break;
case eFileType.eInitialDataCalibration:
{
INCCInitialDataCalibrationFile idcal = new INCCInitialDataCalibrationFile(mlogger, mpath);
bool good = idcal.Restore(mpath);
if (good)
result = idcal; // this now has the structs ready
}
break;
case eFileType.eTransfer:
{
INCCTransferFile idt = new INCCTransferFile(mlogger, mpath);
bool good = idt.Restore(mpath);
if (good)
result = idt; // this now has the structs ready
}
break;
case eFileType.eNCC:
{
INCCReviewFile irf = new INCCReviewFile(mlogger, mpath);
bool good = irf.Restore(mpath);
if (good)
result = irf; // this now has the structs ready
}
break;
case eFileType.eUnknown:
mlogger.TraceEvent(LogLevels.Info, 34007, "Skipping {0}", mpath);
break;
default: // for future expansion
// dev note: NOP and COP files are just CSV or Tab-delimited text files, so no binary matching is needed, so I am moving the handling of these to another class (OPfiles)
mlogger.TraceEvent(LogLevels.Info, 34008, "Not processing the unsupported file {0}", mpath);
break;
};
return result;
}
public virtual INCCTransferBase Restore()
{ // current file
INCCTransferBase result = null;
switch (mft)
{
case eFileType.eInitialDataDetector:
{
INCCInitialDataDetectorFile idd = new INCCInitialDataDetectorFile(mlogger, mpath);
bool good = idd.Restore(mpath);
if (good)
{
result = idd; // this now has the structs ready
}
}
break;
case eFileType.eInitialDataCalibration:
{
INCCInitialDataCalibrationFile idcal = new INCCInitialDataCalibrationFile(mlogger, mpath);
bool good = idcal.Restore(mpath);
if (good)
{
result = idcal; // this now has the structs ready
}
}
break;
case eFileType.eTransfer:
{
INCCTransferFile idt = new INCCTransferFile(mlogger, mpath);
bool good = idt.Restore(mpath);
if (good)
{
result = idt; // this now has the structs ready
}
}
break;
case eFileType.eNCC:
{
INCCReviewFile irf = new INCCReviewFile(mlogger, mpath);
bool good = irf.Restore(mpath);
if (good)
{
result = irf; // this now has the structs ready
}
}
break;
case eFileType.eUnknown:
mlogger.TraceEvent(LogLevels.Info, 34007, "Skipping {0}", mpath);
break;
default: // for future expansion
// dev note: NOP and COP files are just CSV or Tab-delimited text files, so no binary matching is needed, so I am moving the handling of these to another class (OPfiles)
mlogger.TraceEvent(LogLevels.Info, 34008, "Not processing the unsupported file {0}", mpath);
break;
}
;
return(result);
}