public override void Process(UponorResponseContainer values)
{
foreach ((int controller, int thermostat) in _systemDetails.GetAvailableThermostats())
{
string deviceId = HassUniqueIdBuilder.GetThermostatDeviceId(controller, thermostat);
// Temperature
ISensorContainer sensor = HassMqttManager.GetSensor(deviceId, "temperature");
MqttStateValueTopic sender = sensor.GetValueSender(HassTopicKind.State);
if (values.TryGetValue(UponorObjects.Thermostat(UponorThermostats.RoomTemperature, controller, thermostat),
UponorProperties.Value, out float floatVal))
{
if (IsValid.Temperature(floatVal))
{
sender.Value = floatVal;
}
else
{
_logger.LogWarning("Received an invalid temperature of {Value} for {Device}", floatVal, deviceId);
}
}
}
}
public override void Process(UponorResponseContainer values)
{
foreach ((int controller, int thermostat) in _systemDetails.GetAvailableThermostats())
{
string deviceId = HassUniqueIdBuilder.GetThermostatDeviceId(controller, thermostat);
// Temperature
ISensorContainer sensor = HassMqttManager.GetSensor(deviceId, "temp");
if (values.TryGetValue(
UponorObjects.Thermostat(UponorThermostats.RoomTemperature, controller, thermostat),
UponorProperties.Value, out float floatVal))
{
if (IsValid.Temperature(floatVal))
{
sensor.SetValue(HassTopicKind.CurrentTemperature, floatVal);
}
else
{
_logger.LogWarning("Received an invalid temperature of {Value} for {Device}", floatVal, deviceId);
}
}
// Setpoint
if (values.TryGetValue(
UponorObjects.Thermostat(UponorThermostats.RoomSetpoint, controller, thermostat),
UponorProperties.Value, out floatVal))
{
sensor.SetValue(HassTopicKind.TemperatureState, floatVal);
}
// Action & Mode
if (values.TryGetValue(
UponorObjects.Thermostat(UponorThermostats.RoomInDemand, controller, thermostat),
UponorProperties.Value, out int intVal))
{
// If this value is >0, the room is heating/cooling (see H/C mode)
string action, mode;
// Valid values: off, heating, cooling, drying, idle, fan.
if (intVal <= 0)
{
action = "idle";
mode = "off";
}
else if (_systemDetails.HcMode == HcMode.Heating)
{
action = "heating";
mode = "heat";
}
else
{
action = "cooling";
mode = "cool";
}
// Override Mode as auto
if (_operationConfig.OperationMode == OperationMode.Normal)
{
mode = "auto";
}
sensor.SetValue(HassTopicKind.Action, action);
sensor.SetValue(HassTopicKind.ModeState, mode);
}
// Home/away
if (values.TryGetValue(
UponorObjects.Thermostat(UponorThermostats.HomeAwayModeStatus, controller, thermostat),
UponorProperties.Value, out intVal))
{
if (intVal > 0)
{
// Away
sensor.SetValue(HassTopicKind.AwayModeState, "on");
}
else
{
// Home
sensor.SetValue(HassTopicKind.AwayModeState, "off");
}
}
}
}
public override void Process(UponorResponseContainer values)
{
List <string> problems = new List <string>();
foreach ((int controller, int thermostat) in _systemDetails.GetAvailableThermostats())
{
string deviceId = HassUniqueIdBuilder.GetThermostatDeviceId(controller, thermostat);
// Battery sensor
// We don't know what the battery level is with Uponor. So we can only say it's "good" or "bad"
ISensorContainer sensor = HassMqttManager.GetSensor(deviceId, "battery");
if (values.TryGetValue(
UponorObjects.Thermostat(UponorThermostats.BatteryAlarm, controller, thermostat),
UponorProperties.Value, out object objVal) && objVal != null)
{
sensor.SetValue(HassTopicKind.State, BatteryLow);
}
else
{
sensor.SetValue(HassTopicKind.State, BatteryOk);
}
// Alarm sensor
sensor = HassMqttManager.GetSensor(deviceId, "alarms");
problems.Clear();
// Check one of: RfAlarm, BatteryAlarm, TechnicalAlarm, TamperIndication
if (values.TryGetValue(
UponorObjects.Thermostat(UponorThermostats.RfAlarm, controller, thermostat),
UponorProperties.Value, out objVal) && objVal != null)
{
problems.Add("No signal");
sensor.SetAttribute("signal", "alarm");
}
else
{
sensor.SetAttribute("signal", "ok");
}
if (values.TryGetValue(
UponorObjects.Thermostat(UponorThermostats.TechnicalAlarm, controller, thermostat),
UponorProperties.Value, out objVal) && objVal != null)
{
problems.Add("Technical (?)");
sensor.SetAttribute("technical", "alarm");
}
else
{
sensor.SetAttribute("technical", "ok");
}
if (values.TryGetValue(
UponorObjects.Thermostat(UponorThermostats.TamperIndication, controller, thermostat),
UponorProperties.Value, out objVal) && objVal != null)
{
problems.Add("Tampering");
sensor.SetAttribute("tampering", "alarm");
}
else
{
sensor.SetAttribute("tampering", "ok");
}
if (problems.Any())
{
sensor.SetValue(HassTopicKind.State, "on");
sensor.SetAttribute("problem", string.Join(", ", problems));
}
else
{
sensor.SetValue(HassTopicKind.State, "off");
sensor.SetAttribute("problem", string.Empty);
}
}
}
private void CreateEntities(UponorResponseContainer values)
{
// System
string uHomeDeviceId = HassUniqueIdBuilder.GetUhomeDeviceId();
{
const string entityId = "uhome";
_hassMqttManager.ConfigureSensor <MqttSensor>(uHomeDeviceId, entityId)
.ConfigureTopics(HassTopicKind.State, HassTopicKind.JsonAttributes)
.ConfigureDevice(device =>
{
if (!device.Identifiers.Contains(uHomeDeviceId))
{
device.Identifiers.Add(uHomeDeviceId);
}
device.Name = "Uponor U@Home";
device.Manufacturer = "Uponor";
})
.ConfigureAliveService();
_hassMqttManager.ConfigureSensor <MqttSensor>(uHomeDeviceId, "average_temperature")
.ConfigureTopics(HassTopicKind.State)
.ConfigureDevice(device =>
{
if (!device.Identifiers.Contains(uHomeDeviceId))
{
device.Identifiers.Add(uHomeDeviceId);
}
device.Name = "Uponor U@Home";
device.Manufacturer = "Uponor";
})
.ConfigureDiscovery(discovery =>
{
discovery.Name = "Uponor Average Temperature";
discovery.UnitOfMeasurement = "°C";
discovery.DeviceClass = HassSensorDeviceClass.Temperature;
})
.ConfigureAliveService();
}
// Controllers
foreach (int controller in _detailsContainer.GetAvailableControllers())
{
string deviceId = HassUniqueIdBuilder.GetControllerDeviceId(controller);
const string entityId = "controller";
_hassMqttManager.ConfigureSensor <MqttSensor>(deviceId, entityId)
.ConfigureTopics(HassTopicKind.State, HassTopicKind.JsonAttributes)
.ConfigureDevice(device =>
{
if (!device.Identifiers.Contains(deviceId))
{
device.Identifiers.Add(deviceId);
}
device.Name = $"Uponor Controller {controller}";
device.Manufacturer = "Uponor";
device.ViaDevice = uHomeDeviceId;
})
.ConfigureAliveService();
}
// Outdoor sensors
foreach (int controller in _detailsContainer.GetAvailableOutdoorSensors())
{
string controllerId = HassUniqueIdBuilder.GetControllerDeviceId(controller);
const string entityId = "outdoor_sensor";
_hassMqttManager.ConfigureSensor <MqttSensor>(controllerId, entityId)
.ConfigureTopics(HassTopicKind.State)
.ConfigureDevice(device =>
{
if (!device.Identifiers.Contains(controllerId))
{
device.Identifiers.Add(controllerId);
}
device.Name = $"Uponor Controller {controller}";
device.Manufacturer = "Uponor";
device.ViaDevice = controllerId;
})
.ConfigureDiscovery(discovery =>
{
discovery.Name = $"Controller {controller} Outdoor Sensor";
discovery.DeviceClass = HassSensorDeviceClass.Temperature;
discovery.UnitOfMeasurement = "°C";
discovery.StateClass = HassStateClass.Measurement;
})
.ConfigureAliveService();
}
// Thermostats
void SetThermostatDeviceInfo <TEntity>(IDiscoveryDocumentBuilder <TEntity> builder, string name, string deviceId, string controllerId) where TEntity : IHassDiscoveryDocument
{
builder.ConfigureDevice(device =>
{
if (!device.Identifiers.Contains(deviceId))
{
device.Identifiers.Add(deviceId);
}
device.Name = name;
device.Manufacturer = "Uponor";
device.ViaDevice = controllerId;
});
}
foreach ((int controller, int thermostat) in _detailsContainer.GetAvailableThermostats())
{
string controllerId = HassUniqueIdBuilder.GetControllerDeviceId(controller);
string deviceId = HassUniqueIdBuilder.GetThermostatDeviceId(controller, thermostat);
// Name
string deviceName = $"Thermostat {controller}.{thermostat}";
if (values.TryGetValue(UponorObjects.Thermostat(UponorThermostats.RoomName, controller, thermostat),
UponorProperties.Value, out string stringVal) && !string.IsNullOrWhiteSpace(stringVal))
{
deviceName = stringVal;
}
// Climate
IDiscoveryDocumentBuilder <MqttClimate> climateBuilder = _hassMqttManager.ConfigureSensor <MqttClimate>(deviceId, "temp")
.ConfigureTopics(HassTopicKind.JsonAttributes)
.ConfigureTopics(HassTopicKind.CurrentTemperature, HassTopicKind.AwayModeState, HassTopicKind.Action, HassTopicKind.ModeState)
.ConfigureTopics(HassTopicKind.TemperatureCommand, HassTopicKind.TemperatureState)
.ConfigureDiscovery(discovery =>
{
discovery.Name = $"{deviceName} Thermostat";
discovery.Precision = 0.1f;
discovery.TempStep = 0.5f;
})
.ConfigureAliveService();
SetThermostatDeviceInfo(climateBuilder, deviceName, deviceId, controllerId);
// Hacks: HASS has an odd way of determining what Climate devices do.
// With HASS, the mode of the device is what the device is set to do. Ie, in a heating-only climate system, they will _always_ be heating
// While I prefer that the device is shown as what it's currently doing, given my "auto" settings.
switch (_operationConfig.OperationMode)
{
case OperationMode.Normal:
climateBuilder.Discovery.Modes = new[] { "auto" };
break;
case OperationMode.ModeWorkaround:
climateBuilder.Discovery.Modes = new[] { "off", _detailsContainer.HcMode == HcMode.Heating ? "heat" : "cool" };
break;
default:
throw new ArgumentOutOfRangeException();
}
if (values.TryGetValue(UponorObjects.Thermostat(UponorThermostats.MinSetpoint, controller, thermostat),
UponorProperties.Value, out float floatVal))
{
climateBuilder.Discovery.MinTemp = floatVal;
}
if (values.TryGetValue(UponorObjects.Thermostat(UponorThermostats.MaxSetpoint, controller, thermostat),
UponorProperties.Value, out floatVal))
{
climateBuilder.Discovery.MaxTemp = floatVal;
}
// Temperature
IDiscoveryDocumentBuilder <MqttSensor> sensorBuilder = _hassMqttManager.ConfigureSensor <MqttSensor>(deviceId, "temperature")
.ConfigureTopics(HassTopicKind.State)
.ConfigureDiscovery(discovery =>
{
discovery.Name = $"{deviceName} Temperature";
discovery.DeviceClass = HassSensorDeviceClass.Temperature;
discovery.UnitOfMeasurement = "°C";
discovery.StateClass = HassStateClass.Measurement;
})
.ConfigureAliveService();
SetThermostatDeviceInfo(sensorBuilder, deviceName, deviceId, controllerId);
// Humidity
sensorBuilder = _hassMqttManager.ConfigureSensor <MqttSensor>(deviceId, "humidity")
.ConfigureTopics(HassTopicKind.State)
.ConfigureDiscovery(discovery =>
{
discovery.Name = $"{deviceName} Humidity";
discovery.DeviceClass = HassSensorDeviceClass.Humidity;
discovery.UnitOfMeasurement = "%";
discovery.StateClass = HassStateClass.Measurement;
})
.ConfigureAliveService();
SetThermostatDeviceInfo(sensorBuilder, deviceName, deviceId, controllerId);
// Battery sensor
sensorBuilder = _hassMqttManager.ConfigureSensor <MqttSensor>(deviceId, "battery")
.ConfigureTopics(HassTopicKind.State)
.ConfigureDiscovery(discovery =>
{
discovery.Name = $"{deviceName} Battery";
discovery.DeviceClass = HassSensorDeviceClass.Battery;
discovery.UnitOfMeasurement = "%";
})
.ConfigureAliveService();
SetThermostatDeviceInfo(sensorBuilder, deviceName, deviceId, controllerId);
// Alarm sensor
IDiscoveryDocumentBuilder <MqttBinarySensor> binarySensorBuilder = _hassMqttManager.ConfigureSensor <MqttBinarySensor>(deviceId, "alarms")
.ConfigureTopics(HassTopicKind.State, HassTopicKind.JsonAttributes)
.ConfigureDiscovery(discovery =>
{
discovery.Name = $"{deviceName} Alarms";
discovery.DeviceClass = HassBinarySensorDeviceClass.Problem;
})
.ConfigureAliveService();
SetThermostatDeviceInfo(binarySensorBuilder, deviceName, deviceId, controllerId);
}
}