public EngExhaustTempGauge()
: base("EngExhaustTempGauge", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(300d, 0d, 900d, 231d);
_needleCalibration.Add(new CalibrationPointDouble(400d, 29d));
_needleCalibration.Add(new CalibrationPointDouble(500d, 59));
_needleCalibration.Add(new CalibrationPointDouble(600d, 88d));
_needleCalibration.Add(new CalibrationPointDouble(650d, 118d));
_needleCalibration.Add(new CalibrationPointDouble(700d, 148d));
_needleCalibration.Add(new CalibrationPointDouble(750d, 177d));
_needleCalibration.Add(new CalibrationPointDouble(800d, 206d));
_needleCalibration.Add(new CalibrationPointDouble(850d, 218d));
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/EngExhaustTemp/EngExhaustTemp_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/EngExhaustTemp/EngExhaustTemp_needle.xaml", center, new Size(69d, 178d), new Point(34.5d, 126.5d), 242d);
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/EngExhaustTemp/EngExhaustTemp_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentTemp = new HeliosValue(this, BindingValue.Empty, "", "Engine Exhaust", "Current Temp", "", BindingValueUnits.Numeric);
_currentTemp.Execute += CurrentFuel_Execute;
Actions.Add(_currentTemp);
}
public Airspeed()
: base("Airspeed", new Size(364, 376))
{
Components.Add(new GaugeImage("{Helios}/Gauges/F-16/Airspeed/asi_faceplate.xaml", new Rect(32d, 38d, 300d, 300d)));
_machCalibration = new CalibrationPointCollectionDouble(0d, 0d, 1.9d, 270d);
_machCalibration.Add(new CalibrationPointDouble(0.5d, 60d));
_machRing = new GaugeNeedle("{Helios}/Gauges/F-16/Airspeed/asi_inner_faceplate.xaml", new Point(182d, 188d), new Size(188d, 188d), new Point(94d, 94d), -90d);
Components.Add(_machRing);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 850d, 350d);
_needleCalibration.Add(new CalibrationPointDouble(200d, 135d));
_needleCalibration.Add(new CalibrationPointDouble(300d, 195d));
_needleCalibration.Add(new CalibrationPointDouble(400d, 235d));
_needleCalibration.Add(new CalibrationPointDouble(500d, 267d));
_needle = new GaugeNeedle("{Helios}/Gauges/F-16/Airspeed/asi_needle.xaml", new Point(182d, 188d), new Size(300d, 300d), new Point(150d, 150d), -90d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/F-16/Common/f16_gauge_bezel.png", new Rect(0d, 0d, 364d, 376d)));
_airspeed = new HeliosValue(this, new BindingValue(0d), "", "indicated air speed", "Current airspeed of the aricraft.", "", BindingValueUnits.Knots);
_airspeed.Execute += new HeliosActionHandler(Airspeed_Execute);
Actions.Add(_airspeed);
_mach = new HeliosValue(this, new BindingValue(0d), "", "mach", "Current airspeed of the aricraft.", "", BindingValueUnits.Numeric);
_mach.Execute += new HeliosActionHandler(Mach_Execute);
Actions.Add(_mach);
}
public EngExhaustTempGauge()
: base("EngExhaustTempGauge", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(300d, 0d, 900d, 231d);
_needleCalibration.Add(new CalibrationPointDouble(400d, 29d));
_needleCalibration.Add(new CalibrationPointDouble(500d, 59));
_needleCalibration.Add(new CalibrationPointDouble(600d, 88d));
_needleCalibration.Add(new CalibrationPointDouble(650d, 118d));
_needleCalibration.Add(new CalibrationPointDouble(700d, 148d));
_needleCalibration.Add(new CalibrationPointDouble(750d, 177d));
_needleCalibration.Add(new CalibrationPointDouble(800d, 206d));
_needleCalibration.Add(new CalibrationPointDouble(850d, 218d));
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/EngExhaustTemp/EngExhaustTemp_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/EngExhaustTemp/EngExhaustTemp_needle.xaml", center, new Size(69d, 178d), new Point(34.5d, 126.5d), 242d);
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/EngExhaustTemp/EngExhaustTemp_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentTemp = new HeliosValue(this, BindingValue.Empty, "", "Engine Exhaust", "Current Temp", "", BindingValueUnits.Numeric);
_currentTemp.Execute += CurrentFuel_Execute;
Actions.Add(_currentTemp);
}
public EGT()
: base("Exhast Gas Temperature", new Size(340, 340))
{
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/EGT/egt_faceplate.xaml", new Rect(0, 0, 340, 340)));
_leftSmallNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/EGT/egt_small_needle.xaml", new Point(97, 227), new Size(15, 45), new Point(7.5, 37.5), 180d);
Components.Add(_leftSmallNeedle);
_leftLargeNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/EGT/egt_large_needle.xaml", new Point(97, 158), new Size(19, 76), new Point(9.5, 66.5), -135d);
Components.Add(_leftLargeNeedle);
_rightSmallNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/EGT/egt_small_needle.xaml", new Point(238, 227), new Size(15, 45), new Point(7.5, 37.5), 180d);
Components.Add(_rightSmallNeedle);
_rightLargeNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/EGT/egt_large_needle.xaml", new Point(238, 158), new Size(19, 76), new Point(9.5, 66.5), -135d);
Components.Add(_rightLargeNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/EGT/egt_bezel.xaml", new Rect(0, 0, 340, 340)));
_leftTemperature = new HeliosValue(this, BindingValue.Empty, "", "Left Exhaust Temperature", "Exhaust Gas Temperature of left engine.", "", BindingValueUnits.Celsius);
_leftTemperature.Execute += LeftTemperature_Execute;
Actions.Add(_leftTemperature);
_rigthTemperature = new HeliosValue(this, BindingValue.Empty, "", "Right Exhaust Temperature", "Exhaust Gas Temperature of right engine.", "", BindingValueUnits.Celsius);
_rigthTemperature.Execute += RightTemperature_Execute;
Actions.Add(_rigthTemperature);
}
public void SetValueGaugeNeedleCustomControl()
{
_driver.Navigate().GoToUrl("http://www.igniteui.com/radial-gauge/gauge-needle");
var gaugeNeedle = new GaugeNeedle(_driver, "radialgauge");
gaugeNeedle.SetValue(44);
}
public HydroPressure()
: base("HydroPressure", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration1 = new CalibrationPointCollectionDouble(0d, 0d, 300d, 131d);
_needleCalibration2 = new CalibrationPointCollectionDouble(0d, 0d, 300d, -131);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/HydroPressure/hydropressure_faceplate.xaml", new Rect(15, 15, 310, 310)));
Point mainneedle = new Point(266, 266);
Point secondneedle = new Point(71, 73);
_oneNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/HydroPressure/hydropressure_needle.xaml", mainneedle, new Size(20, 130), new Point(10, 120), 248);
Components.Add(_oneNeedle);
_twoNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/HydroPressure/hydropressure_needle.xaml", secondneedle, new Size(20, 130), new Point(10, 120), 201);
Components.Add(_twoNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/HydroPressure/hydropressure_needle_cover.xaml", new Rect(235, 235, 70, 70)));
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/HydroPressure/hydropressure_needle_cover_second.xaml", new Rect(35, 35, 70, 70)));
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_oneE = new HeliosValue(this, BindingValue.Empty, "", "Pressure Main", "Pressure Main", "", BindingValueUnits.Numeric);
_oneE.Execute += OneEng_Execute;
Actions.Add(_oneE);
_twoE = new HeliosValue(this, BindingValue.Empty, "", "Pressure Secondary", "Pressure Secondary", "", BindingValueUnits.Numeric);
_twoE.Execute += TwoEng_Execute;
Actions.Add(_twoE);
}
public Altimeter()
: base("Altimeter", new Size(364, 376))
{
Components.Add(new GaugeImage("{Helios}/Gauges/F-16/Altimeter/altimeter_backplate.xaml", new Rect(32d, 38d, 300d, 300d)));
_tensDrum = new GaugeDrumCounter("{Helios}/Gauges/F-16/Altimeter/alt_drum_tape.xaml", new Point(71d, 164d), "#", new Size(10d, 15d), new Size(30d, 45d));
_tensDrum.Clip = new RectangleGeometry(new Rect(71d, 144d, 150d, 81d));
Components.Add(_tensDrum);
_drum = new GaugeDrumCounter("{Helios}/Gauges/F-16/Common/drum_tape.xaml", new Point(101d, 164d), "#%00", new Size(10d, 15d), new Size(30d, 45d));
_drum.Clip = new RectangleGeometry(new Rect(101d, 144d, 150d, 81d));
Components.Add(_drum);
_airPressureDrum = new GaugeDrumCounter("{Helios}/Gauges/F-16/Common/drum_tape.xaml", new Point(214d, 233d), "###%", new Size(10d, 15d), new Size(15d, 20d));
_airPressureDrum.Value = 2992d;
_airPressureDrum.Clip = new RectangleGeometry(new Rect(214d, 233d, 60d, 20d));
Components.Add(_airPressureDrum);
Components.Add(new GaugeImage("{Helios}/Gauges/F-16/Altimeter/altimeter_faceplate.xaml", new Rect(32d, 38d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 1000d, 360d);
_needle = new GaugeNeedle("{Helios}/Gauges/F-16/Altimeter/altimeter_needle.xaml", new Point(182d, 188d), new Size(16d, 257d), new Point(8d, 138.5d));
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/F-16/Common/f16_gauge_bezel.png", new Rect(0d, 0d, 364d, 376d)));
_airPressure = new HeliosValue(this, new BindingValue(0d), "", "air pressure", "Current air pressure calibaration setting for the altimeter.", "", BindingValueUnits.InchesOfMercury);
_airPressure.SetValue(new BindingValue(29.92), true);
_airPressure.Execute += new HeliosActionHandler(AirPressure_Execute);
Actions.Add(_airPressure);
_altitdue = new HeliosValue(this, new BindingValue(0d), "", "altitude", "Current altitude of the aricraft.", "", BindingValueUnits.Feet);
_altitdue.Execute += new HeliosActionHandler(Altitude_Execute);
Actions.Add(_altitdue);
}
public O2Pressure()
: base("O2Pressure", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0, 0d, 20d, 277d);
_needleCalibration.Add(new CalibrationPointDouble(2d, 30d));
_needleCalibration.Add(new CalibrationPointDouble(4d, 58d));
_needleCalibration.Add(new CalibrationPointDouble(6d, 86d));
_needleCalibration.Add(new CalibrationPointDouble(8d, 115d));
_needleCalibration.Add(new CalibrationPointDouble(10d, 137.9d));
_needleCalibration.Add(new CalibrationPointDouble(12d, 160.7d));
_needleCalibration.Add(new CalibrationPointDouble(14d, 189d));
_needleCalibration.Add(new CalibrationPointDouble(16d, 210.1d));
_needleCalibration.Add(new CalibrationPointDouble(18d, 245d));
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/O2Pressure/o2_pressure_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/Common/small_needle.xaml", center, new Size(23, 164), new Point(11.5, 127), 222d);
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentO2Pressure = new HeliosValue(this, BindingValue.Empty, "", "Current O2 Pressure", "Current O2 Pressure", "", BindingValueUnits.Numeric);
_currentO2Pressure.Execute += CurrentO2Pressure_Execute;
Actions.Add(_currentO2Pressure);
}
public O2Level()
: base("O2Level", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0, 0d, 150d, 158d);
_needleCalibration.Add(new CalibrationPointDouble(10d, 4d));
_needleCalibration.Add(new CalibrationPointDouble(50d, 47.8d));
_needleCalibration.Add(new CalibrationPointDouble(100d, 103d));
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/O2Level/o2_level_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/Common/small_needle.xaml", center, new Size(23, 164), new Point(11.5, 127), 277.5d);
Components.Add(_currentNeedle);
_lLungImage = new GaugeImage("{Helios}/Gauges/MiG-21/O2Level/o2_level_blinker_l.xaml", new Rect(136, 194, 25, 63.9));
Components.Add(_lLungImage);
_rLungImage = new GaugeImage("{Helios}/Gauges/MiG-21/O2Level/o2_level_blinker_r.xaml", new Rect(180, 194, 25, 63.9));
Components.Add(_rLungImage);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentO2Level = new HeliosValue(this, BindingValue.Empty, "", "O2 Level", "Current O2 Level", "", BindingValueUnits.Numeric);
_currentO2Level.Execute += CurrentO2Level_Execute;
Actions.Add(_currentO2Level);
_lLungFlag = new HeliosValue(this, new BindingValue(false), "", "Lung Blinkers", "White when working", "True if displayed.", BindingValueUnits.Boolean);
_lLungFlag.Execute += LFlags_Execute;
Actions.Add(_lLungFlag);
}
public Tachometer()
: base("Tachometer", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 110d, 346.5d);
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/Tachometer/tachometer_faceplate.xaml", new Rect(0, 0, 340, 340)));
_needle2 = new GaugeNeedle("{Helios}/Gauges/KA-50/Tachometer/tachometer_needle_2.xaml", center, new Size(25, 152), new Point(12.5, 139.5), 45d);
Components.Add(_needle2);
_needle1 = new GaugeNeedle("{Helios}/Gauges/KA-50/Tachometer/tachometer_needle_1.xaml", center, new Size(25, 152), new Point(12.5, 139.5), 45d);
Components.Add(_needle1);
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/Tachometer/tachometer_bezel.xaml", new Rect(0, 0, 340, 340)));
_rightRpm = new HeliosValue(this, BindingValue.Empty, "", "Right Engine RPM", "Current RPM of the rotor blades", "", BindingValueUnits.RPMPercent);
_rightRpm.Execute += RightRPM_Execute;
Actions.Add(_rightRpm);
_leftRpm = new HeliosValue(this, BindingValue.Empty, "", "Left Engine RPM", "Current RPM of the rotor blades", "", BindingValueUnits.RPMPercent);
_leftRpm.Execute += LeftRPM_Execute;
Actions.Add(_leftRpm);
}
public Nosecone()
: base("Nosecone", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 1d, 300d);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Nosecone/nosecone_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/Common/generic_needle.xaml", center, new Size(32, 185), new Point(16, 127), 180d);
Components.Add(_currentNeedle);
_manualNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/Nosecone/nosecone_outer_needle.xaml", center, new Size(32, 230), new Point(16, 132), 180d);
Components.Add(_manualNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentPosition = new HeliosValue(this, BindingValue.Empty, "", "Nosecone", "Current Position", "", BindingValueUnits.Numeric);
_currentPosition.Execute += CurrentPosition_Execute;
Actions.Add(_currentPosition);
_manualPosition = new HeliosValue(this, BindingValue.Empty, "", "Nosecone Manual", "Use Manual Knob controller output", "", BindingValueUnits.Numeric);
_manualPosition.Execute += ManualPosition_Execute;
Actions.Add(_manualPosition);
}
public BAltimeter()
: base("Barometric Altimeter", new Size(376, 376))
{
_tensDrum = new GaugeDrumCounter("{Helios}/Gauges/FA-18C/Altimeter/alt_drum_tape.xaml", new Point(73d, 129d), "#", new Size(10d, 15d), new Size(31d, 38d));
_tensDrum.Clip = new RectangleGeometry(new Rect(71d, 144d, 31d, 38d));
Components.Add(_tensDrum);
_drum = new GaugeDrumCounter("{Helios}/Gauges/FA-18C/Common/drum_tape.xaml", new Point(123d, 128d), "#%00", new Size(10d, 15d), new Size(31d, 38d));
_drum.Clip = new RectangleGeometry(new Rect(123d, 130d, 31d, 38d));
Components.Add(_drum);
_airPressureDrum = new GaugeDrumCounter("{Helios}/Gauges/FA-18C/Common/drum_tape.xaml", new Point(135d, 276d), "###%", new Size(10d, 15d), new Size(24d, 32d));
_airPressureDrum.Value = 2992d;
_airPressureDrum.Clip = new RectangleGeometry(new Rect(135d, 276d, 96d, 32d));
Components.Add(_airPressureDrum);
Components.Add(new GaugeImage("{Helios}/Gauges/FA-18C/Altimeter/Altimeter_Faceplate.png", new Rect(0d, 0d, 376d, 376d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 1000d, 360d);
_needle = new GaugeNeedle("{Helios}/Gauges/FA-18C/Altimeter/altimeter_needle.xaml", new Point(188d, 188d), new Size(16d, 160d), new Point(8d, 160d));
Components.Add(_needle);
//Components.Add(new GaugeImage("{Helios}/Gauges/FA-18C/Common/engine_bezel.png", new Rect(0d, 0d, 376d, 376d)));
_altitude = new HeliosValue(this, new BindingValue(0d), "", "altitude", "Current altitude of the aircraft in feet.", "", BindingValueUnits.Feet);
_altitude.Execute += new HeliosActionHandler(Altitude_Execute);
Actions.Add(_altitude);
_airPressure = new HeliosValue(this, new BindingValue(0d), "", "air pressure", "Current air pressure calibaration setting for the altimeter.", "", BindingValueUnits.InchesOfMercury);
_airPressure.SetValue(new BindingValue(29.92d), true);
_airPressure.Execute += new HeliosActionHandler(AirPressure_Execute);
Actions.Add(_airPressure);
}
public TAS()
: base("TAS", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleTasCalibration = new CalibrationPointCollectionDouble(167d, 0d, 833d, 335d);
_needleTasCalibration.Add(new CalibrationPointDouble(278d, 46d));
_needleTasCalibration.Add(new CalibrationPointDouble(417d, 127d));
_needleTasCalibration.Add(new CalibrationPointDouble(555d, 207d));
_needleMCalibration = new CalibrationPointCollectionDouble(0.0d, 0d, 3.0d, 335d);
_needleMCalibration.Add(new CalibrationPointDouble(0.6d, 0d));
_needleMCalibration.Add(new CalibrationPointDouble(1d, 56d));
_needleMCalibration.Add(new CalibrationPointDouble(1.8d, 167d));
_needleTasCalibration.Add(new CalibrationPointDouble(2.0d, 223d));
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/TAS/tas_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentTasNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/TAS/tas_needle.xaml", center, new Size(24, 135), new Point(12, 127), 11d);
Components.Add(_currentTasNeedle);
_currentMNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/TAS/m_needle.xaml", center, new Size(32, 185), new Point(16, 127), 11d);
Components.Add(_currentMNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentTAS = new HeliosValue(this, BindingValue.Empty, "", "TAS", "Current TAS", "", BindingValueUnits.Numeric);
_currentTAS.Execute += CurrentTas_Execute;
Actions.Add(_currentTAS);
_currentM = new HeliosValue(this, BindingValue.Empty, "", "M", "Current M", "", BindingValueUnits.Numeric);
_currentM.Execute += CurrentM_Execute;
Actions.Add(_currentM);
}
public FuelGauge()
: base("Fuel Gauge", new Size(360, 360))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/FuelGauge/fuel_gauge_faceplate.xaml", new Rect(30d, 30d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 6000d, 168d);
_totalDrum = new GaugeDrumCounter("{Helios}/Gauges/A-10/Common/drum_tape.xaml", new Point(135d, 95d), "##%00", new Size(10d, 15d), new Size(18d, 28d));
_totalDrum.Clip = new RectangleGeometry(new Rect(135d, 95d, 90d, 28d));
_totalDrum.Value = 0d;
Components.Add(_totalDrum);
_leftNeedle = new GaugeNeedle("{Helios}/Gauges/A-10/FuelGauge/fuel_gauge_needle.xaml", new Point(180d, 180d), new Size(90d, 177d), new Point(45d, 132d), 186d);
Components.Add(_leftNeedle);
_rightNeedle = new GaugeNeedle("{Helios}/Gauges/A-10/FuelGauge/fuel_gauge_needle.xaml", new Point(180d, 180d), new Size(90d, 177d), new Point(45d, 132d), 174d);
Components.Add(_rightNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/engine_bezel.png", new Rect(0d, 0d, 360d, 360d)));
_leftQuantity = new HeliosValue(this, new BindingValue(0d), "", "left quantity", "Quantity of fuel to display on left needle.", "(0 - 6000)", BindingValueUnits.Pounds);
_leftQuantity.Execute += new HeliosActionHandler(LeftQuantity_Execute);
Actions.Add(_leftQuantity);
_rightQuantity = new HeliosValue(this, new BindingValue(0d), "", "right quantity", "Quantity of fuel to display on right needle.", "(0 - 6000)", BindingValueUnits.Pounds);
_rightQuantity.Execute += new HeliosActionHandler(RightQuantity_Execute);
Actions.Add(_rightQuantity);
_totalQuantity = new HeliosValue(this, new BindingValue(0d), "", "total quantity", "Quantity of fuel to display on the totalizer.", "(0 - 99,999)", BindingValueUnits.Pounds);
_totalQuantity.Execute += new HeliosActionHandler(TotalQuantity_Execute);
Actions.Add(_totalQuantity);
}
public O2Level()
: base("O2Level", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0, 0d, 150d, 158d);
_needleCalibration.Add(new CalibrationPointDouble(10d, 4d));
_needleCalibration.Add(new CalibrationPointDouble(50d, 47.8d));
_needleCalibration.Add(new CalibrationPointDouble(100d, 103d));
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/O2Level/o2_level_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/Common/small_needle.xaml", center, new Size(23, 164), new Point(11.5, 127), 277.5d);
Components.Add(_currentNeedle);
_lLungImage = new GaugeImage("{Helios}/Gauges/Mig-21/O2Level/o2_level_blinker_l.xaml", new Rect(136, 194, 25, 63.9));
Components.Add(_lLungImage);
_rLungImage = new GaugeImage("{Helios}/Gauges/Mig-21/O2Level/o2_level_blinker_r.xaml", new Rect(180, 194, 25, 63.9));
Components.Add(_rLungImage);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentO2Level = new HeliosValue(this, BindingValue.Empty, "", "O2 Level", "Current O2 Level", "", BindingValueUnits.Numeric);
_currentO2Level.Execute += CurrentO2Level_Execute;
Actions.Add(_currentO2Level);
_lLungFlag = new HeliosValue(this, new BindingValue(false), "", "Lung Blinkers", "White when working", "True if displayed.", BindingValueUnits.Boolean);
_lLungFlag.Execute += LFlags_Execute;
Actions.Add(_lLungFlag);
}
public EngingeRpm()
: base("EngingeRpm", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 110d, 344.5d);
_needleCalibration.Add(new CalibrationPointDouble(100d, 315d));
_needleCalibration1 = new CalibrationPointCollectionDouble(0d, 0d, 110d, 344.5d);
_needleCalibration1.Add(new CalibrationPointDouble(25d, 6d));
_needleCalibration1.Add(new CalibrationPointDouble(65d, 158d));
_needleCalibration1.Add(new CalibrationPointDouble(92d, 281d));
_needleCalibration1.Add(new CalibrationPointDouble(100d, 318d));
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/EngineRpm/enginerpm_faceplate.xaml", new Rect(0, 0, 340, 340)));
_twoNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/EngineRpm/enginerpm_needle2.xaml", center, new Size(32, 185), new Point(16, 127), 44);
Components.Add(_twoNeedle);
_oneNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/EngineRpm/enginerpm_needle1.xaml", center, new Size(32, 185), new Point(16, 127), 44);
Components.Add(_oneNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/EngineRpm/enginerpm_bezel.xaml", new Rect(0, 0, 340, 340)));
_oneE = new HeliosValue(this, BindingValue.Empty, "", "rpm1", "Engine rpm 1", "", BindingValueUnits.Numeric);
_oneE.Execute += OneEng_Execute;
Actions.Add(_oneE);
_twoE = new HeliosValue(this, BindingValue.Empty, "", "rpm2", "Engine rpm 2", "", BindingValueUnits.Numeric);
_twoE.Execute += TwoEng_Execute;
Actions.Add(_twoE);
}
public Nosecone()
: base("Nosecone", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 1d, 300d);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/Nosecone/nosecone_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/Common/generic_needle.xaml", center, new Size(32, 185), new Point(16, 127), 180d);
Components.Add(_currentNeedle);
_manualNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/Nosecone/nosecone_outer_needle.xaml", center, new Size(32, 230), new Point(16, 132), 180d);
Components.Add(_manualNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentPosition = new HeliosValue(this, BindingValue.Empty, "", "Nosecone", "Current Position", "", BindingValueUnits.Numeric);
_currentPosition.Execute += CurrentPosition_Execute;
Actions.Add(_currentPosition);
_manualPosition = new HeliosValue(this, BindingValue.Empty, "", "Nosecone Manual", "Use Manual Knob controller output", "", BindingValueUnits.Numeric);
_manualPosition.Execute += ManualPosition_Execute;
Actions.Add(_manualPosition);
}
public Airspeed()
: base("Airspeed", new Size(364, 376))
{
Components.Add(new GaugeImage("{Helios}/Gauges/F-16/Airspeed/asi_faceplate.xaml", new Rect(32d, 38d, 300d, 300d)));
_machCalibration = new CalibrationPointCollectionDouble(0d, 0d, 1.9d, 270d);
_machCalibration.Add(new CalibrationPointDouble(0.5d, 60d));
_machRing = new GaugeNeedle("{Helios}/Gauges/F-16/Airspeed/asi_inner_faceplate.xaml", new Point(182d, 188d), new Size(188d, 188d), new Point(94d, 94d), -90d);
Components.Add(_machRing);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 850d, 350d);
_needleCalibration.Add(new CalibrationPointDouble(200d, 135d));
_needleCalibration.Add(new CalibrationPointDouble(300d, 195d));
_needleCalibration.Add(new CalibrationPointDouble(400d, 235d));
_needleCalibration.Add(new CalibrationPointDouble(500d, 267d));
_needle = new GaugeNeedle("{Helios}/Gauges/F-16/Airspeed/asi_needle.xaml", new Point(182d, 188d), new Size(300d, 300d), new Point(150d, 150d), -90d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/F-16/Common/f16_gauge_bezel.png", new Rect(0d, 0d, 364d, 376d)));
_airspeed = new HeliosValue(this, new BindingValue(0d), "", "indicated air speed", "Current airspeed of the aricraft.", "", BindingValueUnits.Knots);
_airspeed.Execute += new HeliosActionHandler(Airspeed_Execute);
Actions.Add(_airspeed);
_mach = new HeliosValue(this, new BindingValue(0d), "", "mach", "Current airspeed of the aricraft.", "", BindingValueUnits.Numeric);
_mach.Execute += new HeliosActionHandler(Mach_Execute);
Actions.Add(_mach);
}
public IAS()
: base("IAS", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 555.55d, 720d);
_needleCalibration.Add(new CalibrationPointDouble(83.33d, 108d));
_needleCalibration.Add(new CalibrationPointDouble(166.67d, 216d));
_needleCalibration.Add(new CalibrationPointDouble(250d, 324d));
_needleCalibration.Add(new CalibrationPointDouble(333.34d, 432d));
_needleCalibration.Add(new CalibrationPointDouble(416.67d, 540d));
_backCalibration = new CalibrationPointCollectionDouble(0d, 0d, 555.55d, 90d);
_backCalibration.Add(new CalibrationPointDouble(277, 90d));
_backCalibration.Add(new CalibrationPointDouble(270, 0d));
_currentBack = new GaugeNeedle("{Helios}/Gauges/MiG-21/IAS/ias_back.xaml", center, new Size(340, 340), center, -90);
Components.Add(_currentBack);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/IAS/ias_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/Common/generic_needle.xaml", center, new Size(32, 185), new Point(16, 127));
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentIas = new HeliosValue(this, BindingValue.Empty, "", "IAS", "Current IAS", "", BindingValueUnits.Numeric);
_currentIas.Execute += CurrentIas_Execute;
_currentIas.Execute += CurrentBack_Execute;
Actions.Add(_currentIas);
}
public EGT()
: base("Exhast Gas Temperature", new Size(340, 340))
{
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/EGT/egt_faceplate.xaml", new Rect(0, 0, 340, 340)));
_leftSmallNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/EGT/egt_small_needle.xaml", new Point(97, 227), new Size(15, 45), new Point(7.5, 37.5), 180d);
Components.Add(_leftSmallNeedle);
_leftLargeNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/EGT/egt_large_needle.xaml", new Point(97, 158), new Size(19, 76), new Point(9.5, 66.5), -135d);
Components.Add(_leftLargeNeedle);
_rightSmallNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/EGT/egt_small_needle.xaml", new Point(238, 227), new Size(15, 45), new Point(7.5, 37.5), 180d);
Components.Add(_rightSmallNeedle);
_rightLargeNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/EGT/egt_large_needle.xaml", new Point(238, 158), new Size(19, 76), new Point(9.5, 66.5), -135d);
Components.Add(_rightLargeNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/EGT/egt_bezel.xaml", new Rect(0, 0, 340, 340)));
_leftTemperature = new HeliosValue(this, BindingValue.Empty, "", "Left Exhaust Temperature", "Exhaust Gas Temperature of left engine.", "", BindingValueUnits.Celsius);
_leftTemperature.Execute += LeftTemperature_Execute;
Actions.Add(_leftTemperature);
_rigthTemperature = new HeliosValue(this, BindingValue.Empty, "", "Right Exhaust Temperature", "Exhaust Gas Temperature of right engine.", "", BindingValueUnits.Celsius);
_rigthTemperature.Execute += RightTemperature_Execute;
Actions.Add(_rigthTemperature);
}
public void SetValueGaugeNeedleCustomControl()
{
manager.ActiveBrowser.NavigateTo("http://www.igniteui.com/radial-gauge/gauge-needle");
GaugeNeedle gaugeNeedle = new GaugeNeedle("radialgauge");
gaugeNeedle.SetValue(44);
}
public Accelerometer()
: base("Accelerometer", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(-2d, -100d, 4d, 200d);
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/Accelerometer/accelerometer_faceplate.xaml", new Rect(0, 0, 340, 340)));
_lowNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/Accelerometer/accelerometer_limit_needle.xaml", center, new Size(32, 189), new Point(16, 131));
Components.Add(_lowNeedle);
_highNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/Accelerometer/accelerometer_limit_needle.xaml", center, new Size(32, 189), new Point(16, 131));
Components.Add(_highNeedle);
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/Accelerometer/accelerometer_needle.xaml", center, new Size(32, 185), new Point(16, 127));
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/Accelerometer/accelerometer_bezel.xaml", new Rect(0, 0, 340, 340)));
_lowG = new HeliosValue(this, BindingValue.Empty, "", "Low G", "Lowest G attained", "", BindingValueUnits.Numeric);
_lowG.Execute += LowG_Execute;
Actions.Add(_lowG);
_highG = new HeliosValue(this, BindingValue.Empty, "", "High G", "Highest G attained", "", BindingValueUnits.Numeric);
_highG.Execute += HighG_Execute;
Actions.Add(_highG);
_currentG = new HeliosValue(this, BindingValue.Empty, "", "Current G", "Current G", "", BindingValueUnits.Numeric);
_currentG.Execute += CurrentG_Execute;
Actions.Add(_currentG);
}
public FuelGauge()
: base("Fuel Gauge", new Size(360, 360))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/FuelGauge/fuel_gauge_faceplate.xaml", new Rect(30d, 30d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 6000d, 168d);
_totalDrum = new GaugeDrumCounter("{Helios}/Gauges/A-10/Common/drum_tape.xaml", new Point(135d, 95d), "##%00", new Size(10d, 15d), new Size(18d, 28d));
_totalDrum.Clip = new RectangleGeometry(new Rect(135d, 95d, 90d, 28d));
_totalDrum.Value = 0d;
Components.Add(_totalDrum);
_leftNeedle = new GaugeNeedle("{Helios}/Gauges/A-10/FuelGauge/fuel_gauge_needle.xaml", new Point(180d, 180d), new Size(90d, 177d), new Point(45d, 132d), 186d);
Components.Add(_leftNeedle);
_rightNeedle = new GaugeNeedle("{Helios}/Gauges/A-10/FuelGauge/fuel_gauge_needle.xaml", new Point(180d, 180d), new Size(90d, 177d), new Point(45d, 132d), 174d);
Components.Add(_rightNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/engine_bezel.png", new Rect(0d, 0d, 360d, 360d)));
_leftQuantity = new HeliosValue(this, new BindingValue(0d), "", "left quantity", "Quantity of fuel to display on left needle.", "(0 - 6000)", BindingValueUnits.Pounds);
_leftQuantity.Execute += new HeliosActionHandler(LeftQuantity_Execute);
Actions.Add(_leftQuantity);
_rightQuantity = new HeliosValue(this, new BindingValue(0d), "", "right quantity", "Quantity of fuel to display on right needle.", "(0 - 6000)", BindingValueUnits.Pounds);
_rightQuantity.Execute += new HeliosActionHandler(RightQuantity_Execute);
Actions.Add(_rightQuantity);
_totalQuantity = new HeliosValue(this, new BindingValue(0d), "", "total quantity", "Quantity of fuel to display on the totalizer.", "(0 - 99,999)", BindingValueUnits.Pounds);
_totalQuantity.Execute += new HeliosActionHandler(TotalQuantity_Execute);
Actions.Add(_totalQuantity);
}
public Accelerometer()
: base("Accelerometer", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(-2d, -100d, 4d, 200d);
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/Accelerometer/accelerometer_faceplate.xaml", new Rect(0, 0, 340, 340)));
_lowNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/Accelerometer/accelerometer_limit_needle.xaml", center, new Size(32, 189), new Point(16, 131));
Components.Add(_lowNeedle);
_highNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/Accelerometer/accelerometer_limit_needle.xaml", center, new Size(32, 189), new Point(16, 131));
Components.Add(_highNeedle);
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/KA-50/Accelerometer/accelerometer_needle.xaml", center, new Size(32, 185), new Point(16, 127));
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/Accelerometer/accelerometer_bezel.xaml", new Rect(0, 0, 340, 340)));
_lowG = new HeliosValue(this, BindingValue.Empty, "", "Low G", "Lowest G attained", "", BindingValueUnits.Numeric);
_lowG.Execute += LowG_Execute;
Actions.Add(_lowG);
_highG = new HeliosValue(this, BindingValue.Empty, "", "High G", "Highest G attained", "", BindingValueUnits.Numeric);
_highG.Execute += HighG_Execute;
Actions.Add(_highG);
_currentG = new HeliosValue(this, BindingValue.Empty, "", "Current G", "Current G", "", BindingValueUnits.Numeric);
_currentG.Execute += CurrentG_Execute;
Actions.Add(_currentG);
}
public SlipTurn()
: base("SlipTurn", new Size(225, 114))
{
Point center = new Point(112d, 57d);
Components.Add(new GaugeImage("{Helios}/Gauges/AV-8B/ADI/adi_slip_bezel.png", new Rect(0d, 0d, 225d, 114d)));
_slipBallCalibration = new CalibrationPointCollectionDouble(-1d, -50d, 1d, 50d);
_slipBallNeedle = new GaugeNeedle("{Helios}/Gauges/AV-8B/ADI/adi_slip_ball.xaml", new Point(112d, 75d), new Size(24d, 24d), new Point(12d, 12d));
_TurnMarker = new GaugeNeedle("{Helios}/Gauges/AV-8B/ADI/adi_turn_marker.xaml", new Point(112d, 38d), new Size(14d, 18d), new Point(7d, 9d));
Components.Add(_slipBallNeedle);
Components.Add(_TurnMarker);
_warningFlagNeedle = new GaugeNeedle("{Helios}/Gauges/AV-8B/AOA/aoa_off_flag.xaml", new Point(80d, 20d), new Size(28d, 36d), new Point(0d, 0d), 0d);
Components.Add(_warningFlagNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/AV-8B/ADI/adi_slip_guides.xaml", new Rect(0d, 0d, 225d, 114d)));
_slipBall = new HeliosValue(this, new BindingValue(0d), "", "Slip Ball Offset", "Side slip indicator offset from the center of the tube.", "(-1 to 1) -1 full left and 1 is full right.", BindingValueUnits.Numeric);
_slipBall.Execute += new HeliosActionHandler(SlipBall_Execute);
Actions.Add(_slipBall);
_turnIndicator = new HeliosValue(this, new BindingValue(0d), "", "Turn Indicator Offset", "Turn indicator offset from the center of the gauge.", "(-1 to 1) -1 full left and 1 is full right.", BindingValueUnits.Numeric);
_turnIndicator.Execute += new HeliosActionHandler(turnIndicator_Execute);
Actions.Add(_turnIndicator);
_warningFlag = new HeliosValue(this, new BindingValue(false), "", "Slip Turn Warning Flag", "Indicates whether the warning flag is displayed.", "True if displayed.", BindingValueUnits.Boolean);
_warningFlag.Execute += new HeliosActionHandler(OffFlag_Execute);
Actions.Add(_warningFlag);
}
public EngingeRpm()
: base("EngingeRpm", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 110d, 344.5d);
_needleCalibration.Add(new CalibrationPointDouble(100d, 315d));
_needleCalibration1 = new CalibrationPointCollectionDouble(0d, 0d, 110d, 344.5d);
_needleCalibration1.Add(new CalibrationPointDouble(25d, 6d));
_needleCalibration1.Add(new CalibrationPointDouble(65d, 158d));
_needleCalibration1.Add(new CalibrationPointDouble(92d, 281d));
_needleCalibration1.Add(new CalibrationPointDouble(100d, 318d));
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/EngineRpm/enginerpm_faceplate.xaml", new Rect(0, 0, 340, 340)));
_twoNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/EngineRpm/enginerpm_needle2.xaml", center, new Size(32, 185), new Point(16, 127), 44);
Components.Add(_twoNeedle);
_oneNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/EngineRpm/enginerpm_needle1.xaml", center, new Size(32, 185), new Point(16, 127), 44);
Components.Add(_oneNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/EngineRpm/enginerpm_bezel.xaml", new Rect(0, 0, 340, 340)));
_oneE = new HeliosValue(this, BindingValue.Empty, "", "rpm1", "Engine rpm 1", "", BindingValueUnits.Numeric);
_oneE.Execute += OneEng_Execute;
Actions.Add(_oneE);
_twoE = new HeliosValue(this, BindingValue.Empty, "", "rpm2", "Engine rpm 2", "", BindingValueUnits.Numeric);
_twoE.Execute += TwoEng_Execute;
Actions.Add(_twoE);
}
public BatteryCapacity()
: base("BatteryCapacity", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 100d, 300d);
_needleCalibration.Add(new CalibrationPointDouble(10d, 36d));
_needleCalibration.Add(new CalibrationPointDouble(20d, 66d));
_needleCalibration.Add(new CalibrationPointDouble(30d, 96d));
_needleCalibration.Add(new CalibrationPointDouble(40d, 126d));
_needleCalibration.Add(new CalibrationPointDouble(50d, 156d));
_needleCalibration.Add(new CalibrationPointDouble(60d, 186d));
_needleCalibration.Add(new CalibrationPointDouble(70d, 216d));
_needleCalibration.Add(new CalibrationPointDouble(80d, 246d));
_needleCalibration.Add(new CalibrationPointDouble(90d, 276d));
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/BatteryCapacity/battery_capacity_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/Common/generic_small_gray_needle.xaml", center, new Size(32, 185), new Point(16, 127), 210d);
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentBatteryCapacity = new HeliosValue(this, BindingValue.Empty, "", "Current Battery Capacity", "Current Battery Capacity", "", BindingValueUnits.Numeric);
_currentBatteryCapacity.Execute += CurrentBatteryCapacity_Execute;
Actions.Add(_currentBatteryCapacity);
}
public RadioAltimeter()
: base("RadioAltimeter", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0.0d, 0d, 1000d, 231d);
_needleCalibration.Add(new CalibrationPointDouble(10d, 22.5d));
_needleCalibration.Add(new CalibrationPointDouble(20d, 34.6d));
_needleCalibration.Add(new CalibrationPointDouble(30d, 55.6d));
_needleCalibration.Add(new CalibrationPointDouble(40d, 73.8d));
_needleCalibration.Add(new CalibrationPointDouble(50d, 94.2d));
_needleCalibration.Add(new CalibrationPointDouble(60d, 103.2d));
_needleCalibration.Add(new CalibrationPointDouble(70d, 114.2d));
_needleCalibration.Add(new CalibrationPointDouble(80d, 119.6d));
_needleCalibration.Add(new CalibrationPointDouble(90d, 127d));
_needleCalibration.Add(new CalibrationPointDouble(100d, 130.5d));
_needleCalibration.Add(new CalibrationPointDouble(150d, 151.2d));
_needleCalibration.Add(new CalibrationPointDouble(200d, 160.6d));
_needleCalibration.Add(new CalibrationPointDouble(250d, 181.9d));
_needleCalibration.Add(new CalibrationPointDouble(300d, 192.6d));
_needleCalibration.Add(new CalibrationPointDouble(400d, 210.9d));
_needleCalibration.Add(new CalibrationPointDouble(500d, 220.6d));
_needleCalibration.Add(new CalibrationPointDouble(600d, 231d));
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/RadioAltimeter/radalt_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/RadioAltimeter/radalt_needle.xaml", center, new Size(69d, 178d), new Point(34.5d, 126.5d), -120d);
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentRadAlt = new HeliosValue(this, BindingValue.Empty, "", "Current RadAlt", "Current RadAlt", "", BindingValueUnits.Numeric);
_currentRadAlt.Execute += CurrentRadAlt_Execute;
Actions.Add(_currentRadAlt);
}
public VVI()
: base("VVI", new Size(182, 188))
{
//Components.Add(new GaugeImage("{Helios}/Gauges/AV-8B/VVI/vvi_faceplate.xaml", new Rect(32d, 38d, 300d, 300d)));
_needle = new GaugeNeedle("{Helios}/Gauges/AV-8B/Common/needle_a.xaml", new Point(91d, 94d), new Size(11, 82), new Point(5, 65), -90d);
Components.Add(_needle);
//Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/gauge_bezel.png", new Rect(0d, 0d, 364d, 376d)));
_verticalVelocity = new HeliosValue(this, new BindingValue(0d), "", "vertical velocity", "Veritcal velocity of the aircraft", "(-6,000 to 6,000)", BindingValueUnits.FeetPerMinute);
_verticalVelocity.Execute += new HeliosActionHandler(VerticalVelocity_Execute);
Actions.Add(_verticalVelocity);
_calibrationPoints = new CalibrationPointCollectionDouble(-6000d, -167d, 6000d, 167d);
_calibrationPoints.Add(new CalibrationPointDouble(-5000d, -153d));
_calibrationPoints.Add(new CalibrationPointDouble(-4000d, -135d));
_calibrationPoints.Add(new CalibrationPointDouble(-2000d, -90d));
_calibrationPoints.Add(new CalibrationPointDouble(-1000d, -57d));
_calibrationPoints.Add(new CalibrationPointDouble(-500d, -35d));
_calibrationPoints.Add(new CalibrationPointDouble(0d, 0d));
_calibrationPoints.Add(new CalibrationPointDouble(500d, 35d));
_calibrationPoints.Add(new CalibrationPointDouble(1000d, 57d));
_calibrationPoints.Add(new CalibrationPointDouble(2000d, 90d));
_calibrationPoints.Add(new CalibrationPointDouble(4000d, 135d));
_calibrationPoints.Add(new CalibrationPointDouble(5000d, 153d));
}
public VVI1()
: base("Flight Instruments", new Size(364, 376))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/VVI/vvi_faceplate.xaml", new Rect(32d, 38d, 300d, 300d)));
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/Common/needle_a.xaml", new Point(182d, 188d), new Size(22, 165), new Point(11, 130), -90d);
Components.Add(_needle);
//Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/gauge_bezel.png", new Rect(0d, 0d, 364d, 376d)));
//Components.Add(new GaugeImage("{AV-8B}/Images/WQHD/Panel/crystal_reflection_round.png", new Rect(32d, 38d, 300d, 300d)));
GaugeImage _gauge = new GaugeImage("{AV-8B}/Images/WQHD/Panel/crystal_reflection_round.png", new Rect(32d, 38d, 300d, 300d));
_gauge.Opacity = 0.4;
Components.Add(_gauge);
_verticalVelocity = new HeliosValue(this, new BindingValue(0d), "Flight Instruments", "vertical velocity", "Veritcal velocity of the aircraft", "(-6,000 to 6,000)", BindingValueUnits.FeetPerMinute);
_verticalVelocity.Execute += new HeliosActionHandler(VerticalVelocity_Execute);
Actions.Add(_verticalVelocity);
_calibrationPoints = new CalibrationPointCollectionDouble(-6000d, -169d, 6000d, 169d);
_calibrationPoints.Add(new CalibrationPointDouble(-2000d, -81d));
_calibrationPoints.Add(new CalibrationPointDouble(-1000d, -45d));
_calibrationPoints.Add(new CalibrationPointDouble(0d, 0d));
_calibrationPoints.Add(new CalibrationPointDouble(1000d, 45d));
_calibrationPoints.Add(new CalibrationPointDouble(2000d, 81d));
}
public RadioAltimeter()
: base("RadioAltimeter", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0.0d, 0d, 1000d, 231d);
_needleCalibration.Add(new CalibrationPointDouble(10d, 22.5d));
_needleCalibration.Add(new CalibrationPointDouble(20d, 34.6d));
_needleCalibration.Add(new CalibrationPointDouble(30d, 55.6d));
_needleCalibration.Add(new CalibrationPointDouble(40d, 73.8d));
_needleCalibration.Add(new CalibrationPointDouble(50d, 94.2d));
_needleCalibration.Add(new CalibrationPointDouble(60d, 103.2d));
_needleCalibration.Add(new CalibrationPointDouble(70d, 114.2d));
_needleCalibration.Add(new CalibrationPointDouble(80d, 119.6d));
_needleCalibration.Add(new CalibrationPointDouble(90d, 127d));
_needleCalibration.Add(new CalibrationPointDouble(100d, 130.5d));
_needleCalibration.Add(new CalibrationPointDouble(150d, 151.2d));
_needleCalibration.Add(new CalibrationPointDouble(200d, 160.6d));
_needleCalibration.Add(new CalibrationPointDouble(250d, 181.9d));
_needleCalibration.Add(new CalibrationPointDouble(300d, 192.6d));
_needleCalibration.Add(new CalibrationPointDouble(400d, 210.9d));
_needleCalibration.Add(new CalibrationPointDouble(500d, 220.6d));
_needleCalibration.Add(new CalibrationPointDouble(600d, 231d));
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/RadioAltimeter/radalt_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/RadioAltimeter/radalt_needle.xaml", center, new Size(69d, 178d), new Point(34.5d, 126.5d), -120d);
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentRadAlt = new HeliosValue(this, BindingValue.Empty, "", "Current RadAlt", "Current RadAlt", "", BindingValueUnits.Numeric);
_currentRadAlt.Execute += CurrentRadAlt_Execute;
Actions.Add(_currentRadAlt);
}
public IAS()
: base("IAS", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 555.55d, 720d);
_needleCalibration.Add(new CalibrationPointDouble(83.33d, 108d));
_needleCalibration.Add(new CalibrationPointDouble(166.67d, 216d));
_needleCalibration.Add(new CalibrationPointDouble(250d, 324d));
_needleCalibration.Add(new CalibrationPointDouble(333.34d, 432d));
_needleCalibration.Add(new CalibrationPointDouble(416.67d, 540d));
_backCalibration = new CalibrationPointCollectionDouble(0d, 0d, 555.55d, 90d);
_backCalibration.Add(new CalibrationPointDouble(277, 90d));
_backCalibration.Add(new CalibrationPointDouble(270, 0d));
_currentBack = new GaugeNeedle("{Helios}/Gauges/Mig-21/IAS/ias_back.xaml", center, new Size(340, 340), center, -90);
Components.Add(_currentBack);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/IAS/ias_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/Common/generic_needle.xaml", center, new Size(32, 185), new Point(16, 127));
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentIas = new HeliosValue(this, BindingValue.Empty, "", "IAS", "Current IAS", "", BindingValueUnits.Numeric);
_currentIas.Execute += CurrentIas_Execute;
_currentIas.Execute += CurrentBack_Execute;
Actions.Add(_currentIas);
}
public BatteryCapacity()
: base("BatteryCapacity", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 100d, 300d);
_needleCalibration.Add(new CalibrationPointDouble(10d, 36d));
_needleCalibration.Add(new CalibrationPointDouble(20d, 66d));
_needleCalibration.Add(new CalibrationPointDouble(30d, 96d));
_needleCalibration.Add(new CalibrationPointDouble(40d, 126d));
_needleCalibration.Add(new CalibrationPointDouble(50d, 156d));
_needleCalibration.Add(new CalibrationPointDouble(60d, 186d));
_needleCalibration.Add(new CalibrationPointDouble(70d, 216d));
_needleCalibration.Add(new CalibrationPointDouble(80d, 246d));
_needleCalibration.Add(new CalibrationPointDouble(90d, 276d));
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/BatteryCapacity/battery_capacity_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/Common/generic_small_gray_needle.xaml", center, new Size(32, 185), new Point(16, 127), 210d);
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentBatteryCapacity = new HeliosValue(this, BindingValue.Empty, "", "Current Battery Capacity", "Current Battery Capacity", "", BindingValueUnits.Numeric);
_currentBatteryCapacity.Execute += CurrentBatteryCapacity_Execute;
Actions.Add(_currentBatteryCapacity);
}
public HydroPressure()
: base("HydroPressure", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration1 = new CalibrationPointCollectionDouble(0d, 0d, 300d, 131d);
_needleCalibration2 = new CalibrationPointCollectionDouble(0d, 0d, 300d, -131);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/HydroPressure/hydropressure_faceplate.xaml", new Rect(15, 15, 310, 310)));
Point mainneedle = new Point(266, 266);
Point secondneedle = new Point(71, 73);
_oneNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/HydroPressure/hydropressure_needle.xaml", mainneedle, new Size(20, 130), new Point(10, 120), 248);
Components.Add(_oneNeedle);
_twoNeedle = new GaugeNeedle("{Helios}/Gauges/MiG-21/HydroPressure/hydropressure_needle.xaml", secondneedle, new Size(20, 130), new Point(10, 120), 201);
Components.Add(_twoNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/HydroPressure/hydropressure_needle_cover.xaml", new Rect(235, 235, 70, 70)));
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/HydroPressure/hydropressure_needle_cover_second.xaml", new Rect(35, 35, 70, 70)));
Components.Add(new GaugeImage("{Helios}/Gauges/MiG-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_oneE = new HeliosValue(this, BindingValue.Empty, "", "Pressure Main", "Pressure Main", "", BindingValueUnits.Numeric);
_oneE.Execute += OneEng_Execute;
Actions.Add(_oneE);
_twoE = new HeliosValue(this, BindingValue.Empty, "", "Pressure Secondary", "Pressure Secondary", "", BindingValueUnits.Numeric);
_twoE.Execute += TwoEng_Execute;
Actions.Add(_twoE);
}
public TAS()
: base("TAS", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleTasCalibration = new CalibrationPointCollectionDouble(167d, 0d, 833d, 335d);
_needleTasCalibration.Add(new CalibrationPointDouble(278d, 46d));
_needleTasCalibration.Add(new CalibrationPointDouble(417d, 127d));
_needleTasCalibration.Add(new CalibrationPointDouble(555d, 207d));
_needleMCalibration = new CalibrationPointCollectionDouble(0.0d, 0d, 3.0d, 335d);
_needleMCalibration.Add(new CalibrationPointDouble(0.6d, 0d));
_needleMCalibration.Add(new CalibrationPointDouble(1d, 56d));
_needleMCalibration.Add(new CalibrationPointDouble(1.8d, 167d));
_needleTasCalibration.Add(new CalibrationPointDouble(2.0d, 223d));
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/TAS/tas_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentTasNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/TAS/tas_needle.xaml", center, new Size(24, 135), new Point(12, 127), 11d);
Components.Add(_currentTasNeedle);
_currentMNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/TAS/m_needle.xaml", center, new Size(32, 185), new Point(16, 127), 11d);
Components.Add(_currentMNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentTAS = new HeliosValue(this, BindingValue.Empty, "", "TAS", "Current TAS", "", BindingValueUnits.Numeric);
_currentTAS.Execute += CurrentTas_Execute;
Actions.Add(_currentTAS);
_currentM = new HeliosValue(this, BindingValue.Empty, "", "M", "Current M", "", BindingValueUnits.Numeric);
_currentM.Execute += CurrentM_Execute;
Actions.Add(_currentM);
}
public Tachometer()
: base("Tachometer", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 110d, 346.5d);
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/Tachometer/tachometer_faceplate.xaml", new Rect(0, 0, 340, 340)));
_needle2 = new GaugeNeedle("{Helios}/Gauges/KA-50/Tachometer/tachometer_needle_2.xaml", center, new Size(25, 152), new Point(12.5, 139.5), 45d);
Components.Add(_needle2);
_needle1 = new GaugeNeedle("{Helios}/Gauges/KA-50/Tachometer/tachometer_needle_1.xaml", center, new Size(25, 152), new Point(12.5, 139.5), 45d);
Components.Add(_needle1);
Components.Add(new GaugeImage("{Helios}/Gauges/KA-50/Tachometer/tachometer_bezel.xaml", new Rect(0, 0, 340, 340)));
_rightRpm = new HeliosValue(this, BindingValue.Empty, "", "Right Engine RPM", "Current RPM of the rotor blades", "", BindingValueUnits.RPMPercent);
_rightRpm.Execute += RightRPM_Execute;
Actions.Add(_rightRpm);
_leftRpm = new HeliosValue(this, BindingValue.Empty, "", "Left Engine RPM", "Current RPM of the rotor blades", "", BindingValueUnits.RPMPercent);
_leftRpm.Execute += LeftRPM_Execute;
Actions.Add(_leftRpm);
}
// Base construcor is passed default name and native size
public AOA()
: base("Angle of Attack", new Size(300, 300))
{
Components.Add(new GaugeImage("{Helios}/Gauges/AV-8B/Common/300_Gauge.xaml", new Rect(0d, 0d, 300d, 300d)));
// Components contains all artifacts that are used to draw the gauge, they are drawn in the order they are added to the collection.
_warningFlagNeedle = new GaugeNeedle("{Helios}/Gauges/AV-8B/AOA/aoa_off_flag.xaml", new Point(20d, 248d), new Size(70d, 90d), new Point(0d, 178d), 0d);
Components.Add(_warningFlagNeedle);
// Add faceplate image to drawing components
// Source image file (xaml will be vector rendered to appropriate size)
Components.Add(new GaugeImage("{Helios}/Gauges/AV-8B/AOA/aoa_faceplate.xaml", new Rect(0d, 0d, 300d, 300d)));
// Rectangle inside gauge where image will be drawn (scaled automatically to fit rectangle)
//new Rect(32d, 38d, 300d, 300d)));
// Create needle calibration scale which will be used to represent 0 degrees rotation for 0 input and 270 degrees rotation when input is 30.
_needleCalibration = new CalibrationPointCollectionDouble(-5d, -36d, 20d, 146d);
_needleCalibration.Add(new CalibrationPointDouble(0d, 0d));
// Add needle to drawing components
// Source image file (xaml will be vector rendered to appropriate size)
_needle = new GaugeNeedle("{Helios}/Gauges/AV-8B/Common/needle_a.xaml",
// Location on gauge which the needle will be rotated
new Point(150d, 150d),
// Size of needle image (will scale image to this size automatically)
new Size(30d, 128d),
// Center point of needle image to rotate around
new Point(15d, 113d),
// Initial rotation for this needle
173d);
Components.Add(_needle);
_warningFlag = new HeliosValue(this, new BindingValue(false), "", "Warning Flag", "Indicates whether the warning flag is displayed.", "True if displayed.", BindingValueUnits.Boolean);
_warningFlag.Execute += new HeliosActionHandler(OffFlag_Execute);
Actions.Add(_warningFlag);
//Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/gauge_bezel.png", new Rect(0d, 0d, 364d, 376d)));
// Create Angle of Attack value holder
// Owning Object
_aoa = new HeliosValue(this,
// Default Value
new BindingValue(0d),
// Device Hint
"",
// Name
"angle of attack",
// Description
"Current angle of attack of the aircraft.",
// Value Description
"(-5 to 20)",
// Value Unit of Measure
BindingValueUnits.Degrees);
// Hook event callback for when the Angle of Attack value is updated
_aoa.Execute += new HeliosActionHandler(AOA_Execute);
// Add angle of attack value into possible action list for bindings
Actions.Add(_aoa);
}
public edpNoz()
: base("EDP Nozzle", new Size(12, 48))
{
//Components.Add(new GaugeImage("{Helios}/Gauges/AV-8B/Engine Panel/edp_faceplate.xaml", new Rect(0d, 0d, 528d, 302d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 0.94d, 130d);
_needle = new GaugeNeedle("{Helios}/Gauges/AV-8B/Engine Panel/nozzle_needle.xaml", new Point(0d, 0d), new Size(12d, 48d), new Point(6d, 42d), 90d);
Components.Add(_needle);
_angle = new HeliosValue(this, new BindingValue(0d), "", "value", "Current position of Nozzles.", "(0 - 120)", BindingValueUnits.Degrees);
_angle.Execute += new HeliosActionHandler(Angle_Execute);
Actions.Add(_angle);
}
public VVI() : base("VVI", new Size(364, 376))
{
Components.Add(new GaugeImage("{Helios}/Gauges/FA-18C/VVI/VVI_Faceplate.png", new Rect(32d, 38d, 300d, 300d)));
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/Common/needle_a.xaml", new Point(182d, 188d), new Size(22, 165), new Point(11, 130), -90d);
Components.Add(_needle);
//Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/gauge_bezel.png", new Rect(0d, 0d, 364d, 376d)));
_verticalVelocity = new HeliosValue(this, new BindingValue(0d), "", "vertical velocity", "Veritcal velocity of the aircraft", "(-6,000 to 6,000)", BindingValueUnits.FeetPerMinute);
_verticalVelocity.Execute += new HeliosActionHandler(VerticalVelocity_Execute);
Actions.Add(_verticalVelocity);
_calibrationPoints = new CalibrationPointCollectionDouble(-6000d, -169d, 6000d, 169d);
_calibrationPoints.Add(new CalibrationPointDouble(0d, 0d));
}
public HARSSync()
: base("HARS Sync", new Size(300d, 150d))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/HARS/hars_faceplate.xaml", new Rect(0d, 0d, 300d, 150d)));
_needleCalibration = new CalibrationPointCollectionDouble(-1d, -80d, 1d, 80d);
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/HARS/hars_needle.xaml", new Point(150d, 150d), new Size(25d, 125d), new Point(12.5d, 112.5d), 0d);
_needle.Clip = new RectangleGeometry(new Rect(0d, 0d, 300d, 146d));
Components.Add(_needle);
_syncOffset = new HeliosValue(this, new BindingValue(0d), "", "sync offset", "Location of sync needle", "(-1 to 1)", BindingValueUnits.Numeric);
_syncOffset.Execute += new HeliosActionHandler(Sync_Execute);
Actions.Add(_syncOffset);
}
public HARSSync()
: base("HARS Sync", new Size(300d, 150d))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/HARS/hars_faceplate.xaml", new Rect(0d, 0d, 300d, 150d)));
_needleCalibration = new CalibrationPointCollectionDouble(-1d, -80d, 1d, 80d);
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/HARS/hars_needle.xaml", new Point(150d, 150d), new Size(25d, 125d), new Point(12.5d, 112.5d), 0d);
_needle.Clip = new RectangleGeometry(new Rect(0d, 0d, 300d, 146d));
Components.Add(_needle);
_syncOffset = new HeliosValue(this, new BindingValue(0d), "", "sync offset", "Location of sync needle", "(-1 to 1)", BindingValueUnits.Numeric);
_syncOffset.Execute += new HeliosActionHandler(Sync_Execute);
Actions.Add(_syncOffset);
}
// Base construcor is passed default name and native size
public AOA()
: base("Angle of Attack", new Size(364, 376))
{
// Components contains all artifacts that are used to draw the gauge, they are drawn in the order they are added to the collection.
// Add faceplate image to drawing components
// Source image file (xaml will be vector rendered to appropriate size)
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/AOA/aoa_faceplate.xaml",
// Rectangle inside gauge where image will be drawn (scaled automatically to fit rectangle)
new Rect(32d, 38d, 300d, 300d)));
// Create needle calibration scale which will be used to represent 0 degrees rotation for 0 input and 270 degrees rotation when input is 30.
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 30d, 270d);
// Add needle to drawing components
// Source image file (xaml will be vector rendered to appropriate size)
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/Common/needle_a.xaml",
// Location on gauge which the needle will be rotated
new Point(182d, 188d),
// Size of needle image (will scale image to this size automatically)
new Size(22d, 165d),
// Center point of needle image to rotate around
new Point(11d, 130d),
// Initial rotation for this needle
-90d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/gauge_bezel.png", new Rect(0d, 0d, 364d, 376d)));
// Create Angle of Attack value holder
// Owning Object
_aoa = new HeliosValue(this,
// Default Value
new BindingValue(0d),
// Device Hint
"",
// Name
"angle of attack",
// Description
"Current angle of attack of the aircraft.",
// Value Description
"(0 - 30)",
// Value Unit of Measure
BindingValueUnits.Degrees);
// Hook event callback for when the Angle of Attack value is updated
_aoa.Execute += new HeliosActionHandler(AOA_Execute);
// Add angle of attack value into possible action list for bindings
Actions.Add(_aoa);
}
public HARSSync()
: base("HARS Sync", new Size(137d, 79d))
{
Components.Add(new GaugeImage("{A-10C}/Images/A-10C/A-10C_HARS_Scale_Panel.png", new Rect(0d, 0d, 137d, 79d)));
_needleCalibration = new CalibrationPointCollectionDouble(-1d, -80d, 1d, 80d);
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/HARS/hars_needle.xaml", new Point(69d, 120d), new Size(20d, 75d), new Point(10d, 100d), 0d);
_needle.Clip = new RectangleGeometry(new Rect(0d, 0d, 137d, 79d));
Components.Add(_needle);
_syncOffset = new HeliosValue(this, new BindingValue(0d), "", "sync offset", "Location of sync needle", "(-1 to 1)", BindingValueUnits.Numeric);
_syncOffset.Execute += new HeliosActionHandler(Sync_Execute);
Actions.Add(_syncOffset);
}
public DA200()
: base("DA200", new Size(340, 340))
{
Point center = new Point(170, 170);
Point bottomCenter = new Point(170, 240);
Point veryBottomCenter = new Point(170, 310);
_vvineedleCalibration = new CalibrationPointCollectionDouble(-400d, -135d, 400d, 135d);
_vvineedleCalibration.Add(new CalibrationPointDouble(-200d, -121d));
_vvineedleCalibration.Add(new CalibrationPointDouble(-100d, -102d));
_vvineedleCalibration.Add(new CalibrationPointDouble(-50d, -80d));
_vvineedleCalibration.Add(new CalibrationPointDouble(-20d, -70d));
_vvineedleCalibration.Add(new CalibrationPointDouble(-10d, -35d));
_vvineedleCalibration.Add(new CalibrationPointDouble(0d, 0d));
_vvineedleCalibration.Add(new CalibrationPointDouble(10d, 35d));
_vvineedleCalibration.Add(new CalibrationPointDouble(20d, 70d));
_vvineedleCalibration.Add(new CalibrationPointDouble(50d, 80d));
_vvineedleCalibration.Add(new CalibrationPointDouble(100d, 102d));
_vvineedleCalibration.Add(new CalibrationPointDouble(200d, 121d));
_vviNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/DA200/da200vvi_needle.xaml", center, new Size(32, 185), new Point(16, 127), 270);
_slipBallCalibration = new CalibrationPointCollectionDouble(-1d, 57d, 1d, -57d);
_slipBallCalibration.Add(new CalibrationPointDouble(0d, 0d));
_slipBallNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/DA200/da200_slip_ball.xaml", bottomCenter, new Size(23, 23), new Point(11.5, 11.5));
_turnneedleCalibration = new CalibrationPointCollectionDouble(-0.04433d, -26d, 0.04433d, 26d);
_turnNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/DA200/da200bank_needle.xaml", veryBottomCenter, new Size(34, 218), new Point(17, 208));
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/DA200/da200_faceplate.xaml", new Rect(0, 0, 340, 340)));
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/DA200/da200slip_faceplate.xaml", new Rect(99, 222, 140, 36)));
Components.Add(_slipBallNeedle);
Components.Add(_turnNeedle);
Components.Add(_vviNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_vviE = new HeliosValue(this, BindingValue.Empty, "", "VVI", "Velocity", "", BindingValueUnits.Numeric);
_vviE.Execute += vvi_Execute;
Actions.Add(_vviE);
_slipBallE = new HeliosValue(this, BindingValue.Empty, "", "Slip", "Slip Ball", "", BindingValueUnits.Numeric);
_slipBallE.Execute += SlipBall_Execute;
Actions.Add(_slipBallE);
_turnE = new HeliosValue(this, BindingValue.Empty, "", "Turn", "Turn", "", BindingValueUnits.Numeric);
_turnE.Execute += turn_Execute;
Actions.Add(_turnE);
}
public OilPressure()
: base("Oil Pressure", new Size(360, 360))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/OilPressure/eng_oil_pressure_faceplate.xaml", new Rect(30d, 30d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 100d, 270d);
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/Common/eng_needle.xaml", new Point(180d, 180d), new Size(69d, 161d), new Point(34.5d, 126.5d), 135d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/engine_bezel.png", new Rect(0d, 0d, 360d, 360d)));
_pressure = new HeliosValue(this, new BindingValue(0d), "", "oil pressure", "Current oil pressure of the aircraft enigne fan.", "(0 - 100)", BindingValueUnits.PoundsPerSquareInch);
_pressure.Execute += new HeliosActionHandler(Pressure_Execute);
Actions.Add(_pressure);
}
public FuelFlow()
: base("Fuel Flow", new Size(360, 360))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/FuelFlow/eng_fuel_flow_faceplate.xaml", new Rect(30d, 30d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 5000d, 300d);
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/Common/eng_needle.xaml", new Point(180d, 180d), new Size(69d, 161d), new Point(34.5d, 126.5d), 150d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/engine_bezel.png", new Rect(0d, 0d, 360d, 360d)));
_fuelFlow = new HeliosValue(this, new BindingValue(0d), "", "fuel flow", "Current fuel consumption of the aircraft enigne fan.", "", BindingValueUnits.PoundsPerHour);
_fuelFlow.Execute += new HeliosActionHandler(FuelFlow_Execute);
Actions.Add(_fuelFlow);
}
public LiquidOxygen()
: base("Liquid Oxygen", new Size(360, 360))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/LiquidOxygen/liquid_oxygen_faceplate.xaml", new Rect(30d, 30d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 5d, 180d);
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/LiquidOxygen/liquid_oxygen_needle.xaml", new Point(180d, 180d), new Size(175d, 74d), new Point(138d, 37d), 0d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/engine_bezel.png", new Rect(0d, 0d, 360d, 360d)));
_liquidOxygen = new HeliosValue(this, new BindingValue(0d), "", "liquid oxygen", "Remaining liquid oxygen.", "(1-5)", BindingValueUnits.Liters);
_liquidOxygen.Execute += new HeliosActionHandler(LiquidOxygen_Execute);
Actions.Add(_liquidOxygen);
}
public ApuEGT()
: base("APU EGT", new Size(360, 360))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/ApuEGT/apu_egt_faceplate.xaml", new Rect(30d, 30d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 1000d, 250d);
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/Common/eng_needle.xaml", new Point(180d, 180d), new Size(69d, 161d), new Point(34.5d, 126.5d), 90d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/engine_bezel.png", new Rect(0d, 0d, 360d, 360d)));
_temperature = new HeliosValue(this, new BindingValue(0d), "", "temperature", "Current temperature of the aircraft APU.", "(0 - 1000)", BindingValueUnits.Celsius);
_temperature.Execute += new HeliosActionHandler(Temperature_Execute);
Actions.Add(_temperature);
}
public ApuRPM()
: base("APU RPM", new Size(360, 360))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/ApuRPM/apu_rpm_faceplate.xaml", new Rect(30d, 30d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 120d, 225d);
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/Common/eng_needle.xaml", new Point(180d, 180d), new Size(69d, 161d), new Point(34.5d, 126.5d), 90d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/engine_bezel.png", new Rect(0d, 0d, 360d, 360d)));
_rpm = new HeliosValue(this, new BindingValue(0d), "", "rpm", "Current RPM of the APU as a percentage of maxium.", "(0-120)", BindingValueUnits.RPMPercent);
_rpm.Execute += new HeliosActionHandler(RPM_Execute);
Actions.Add(_rpm);
}
public Hydraulic()
: base("Hydraulic Pressure", new Size(360, 360))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Hydraulic/hydraulic_faceplate.xaml", new Rect(30d, 30d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 4000d, 296d);
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/Hydraulic/hydraulic_needle.xaml", new Point(180d, 180d), new Size(58d, 164d), new Point(29d, 135d), 103.5d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/engine_bezel.png", new Rect(0d, 0d, 360d, 360d)));
_pressure = new HeliosValue(this, new BindingValue(0d), "", "pressure", "Current pressure for the hydraulic system.", "", BindingValueUnits.PoundsPerSquareInch);
_pressure.Execute += new HeliosActionHandler(Pressure_Execute);
Actions.Add(_pressure);
}
public OxygenPressure()
: base("Oxygen Supply Pressure", new Size(360, 360))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/OxygenPressure/oxygen_pressure_faceplate.xaml", new Rect(30d, 30d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 500d, 180d);
_needleCalibration.Add(new CalibrationPointDouble(100d, 90d));
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/OxygenPressure/oxygen_pressure_needle.xaml", new Point(180d, 180d), new Size(175d, 74d), new Point(138d, 37d), 0d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/engine_bezel.png", new Rect(0d, 0d, 360d, 360d)));
_liquidOxygen = new HeliosValue(this, new BindingValue(0d), "", "oxygen supply pressure", "Current pressure in the oxygen system.", "(0-500)", BindingValueUnits.PoundsPerSquareInch);
_liquidOxygen.Execute += new HeliosActionHandler(LiquidOxygen_Execute);
Actions.Add(_liquidOxygen);
}
public FanRPM()
: base("Fan RPM", new Size(360, 360))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/FanRPM/eng_fan_rpm_faceplate.xaml", new Rect(30d, 30d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 100d, 330d);
_needleCalibration.Add(new CalibrationPointDouble(75d, 150d));
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/Common/eng_needle.xaml", new Point(180d, 180d), new Size(69d, 161d), new Point(34.5d, 126.5d), 30d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/engine_bezel.png", new Rect(0d, 0d, 360d, 360d)));
_rpm = new HeliosValue(this, new BindingValue(0d), "", "rpm", "Current RPM of the aircraft enigne fan.", "(0 - 100)", BindingValueUnits.RPMPercent);
_rpm.Execute += new HeliosActionHandler(RPM_Execute);
Actions.Add(_rpm);
}
public Flaps()
: base("Flaps", new Size(360, 360))
{
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Flaps/flaps_faceplate.xaml", new Rect(30d, 30d, 300d, 300d)));
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 30d, 90d);
_needle = new GaugeNeedle("{Helios}/Gauges/A-10/Common/eng_needle.xaml", new Point(180d, 180d), new Size(69d, 161d), new Point(34.5d, 126.5d), 90d);
Components.Add(_needle);
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Flaps/flaps_cover.xaml", new Rect(30d, 30d, 300d, 300d)));
Components.Add(new GaugeImage("{Helios}/Gauges/A-10/Common/engine_bezel.png", new Rect(0d, 0d, 360d, 360d)));
_position = new HeliosValue(this, new BindingValue(0d), "", "position", "Current position of the flaps on the aircraft.", "(0 - 30)", BindingValueUnits.Degrees);
_position.Execute += new HeliosActionHandler(Position_Execute);
Actions.Add(_position);
}
public RollTrim()
: base("Trim", new Size(100, 200))
{
_needleCalibration = new CalibrationPointCollectionDouble(-0.5d, -90d, 0.5d, 90d);
_needleCalibration.Add(new CalibrationPointDouble(60d, 108d));
Components.Add(new GaugeImage("{Helios}/Gauges/F-16/Trim/rolltrim_faceplate.xaml", new Rect(0d, 0d, 100d, 200d)));
_needle = new GaugeNeedle("{Helios}/Gauges/F-16/Trim/rolltrim_needle.xaml", new Point(93d, 100d), new Size(90d, 14d), new Point(83d, 7d));
//_needle.Clip = new RectangleGeometry(new Rect(0d, 0d, 100d, 200d));
Components.Add(_needle);
_trim = new HeliosValue(this, new BindingValue(0d), "", "roll trim", "Current amount of roll trim currently set.", "(-0.5 to 0.5)", BindingValueUnits.Numeric);
_trim.SetValue(new BindingValue(29.92), true);
_trim.Execute += new HeliosActionHandler(Trim_Execute);
Actions.Add(_trim);
}
public Voltmeter()
: base("Voltmeter", new Size(340, 340))
{
Point center = new Point(170, 170);
_needleCalibration = new CalibrationPointCollectionDouble(0d, 0d, 30d, 267d);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Voltmeter/voltmeter_faceplate.xaml", new Rect(0, 0, 340, 340)));
_currentNeedle = new GaugeNeedle("{Helios}/Gauges/Mig-21/Common/generic_gray_needle.xaml", center, new Size(69d, 178d), new Point(34.5d, 126.5d), 224.5d);
Components.Add(_currentNeedle);
Components.Add(new GaugeImage("{Helios}/Gauges/Mig-21/Common/generic_bezel.xaml", new Rect(0, 0, 340, 340)));
_currentVolts = new HeliosValue(this, BindingValue.Empty, "", "Volts", "Current volts", "", BindingValueUnits.Numeric);
_currentVolts.Execute += CurrentFuel_Execute;
Actions.Add(_currentVolts);
}
