예제 #1
0
파일: PacketsNet.cs 프로젝트: nandub/DeOps
        public static DhtAddress ReadPacket(G2Header root)
        {
            // read payload
            DhtAddress address = new DhtAddress();

            address.UserID   = BitConverter.ToUInt64(root.Data, root.PayloadPos);
            address.ClientID = BitConverter.ToUInt16(root.Data, root.PayloadPos + 8);
            address.UdpPort  = BitConverter.ToUInt16(root.Data, root.PayloadPos + 10);

            // read packets
            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_IP:
                    address.IP = new IPAddress(Utilities.ExtractBytes(child.Data, child.PayloadPos, child.PayloadSize));
                    break;
                }
            }

            return(address);
        }
예제 #2
0
파일: PacketsForm.cs 프로젝트: nandub/DeOps
        public void ReadChildren(G2Header rootPacket, TreeNode rootNode, Type packetType)
        {
            G2Header child = new G2Header(rootPacket.Data);

            while (G2Protocol.ReadNextChild(rootPacket, child) == G2ReadResult.PACKET_GOOD)
            {
                string name = child.Name.ToString();

                if (packetType != null)
                {
                    name += " : " + GetVariableName(packetType, child.Name);
                }

                TreeNode childNode = rootNode.Nodes.Add(name);

                if (G2Protocol.ReadPayload(child))
                {
                    //childNode.Nodes.Add( "Payload Ascii: " + Utilities.BytestoAscii(childPacket.Data, childPacket.PayloadPos, childPacket.PayloadSize));
                    childNode.Nodes.Add(new DataNode(child.Data, child.PayloadPos, child.PayloadSize));
                }

                G2Protocol.ResetPacket(child);

                ReadChildren(child, childNode, null);
            }
        }
예제 #3
0
        public static AudioPacket Decode(G2Header root)
        {
            AudioPacket packet = new AudioPacket();

            if (G2Protocol.ReadPayload(root))
            {
                packet.Audio = Utilities.ExtractBytes(root.Data, root.PayloadPos, root.PayloadSize);
            }

            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_FrameSize:
                    packet.FrameSize = CompactNum.ToInt32(child.Data, child.PayloadPos, child.PayloadSize);
                    break;
                }
            }

            return(packet);
        }
예제 #4
0
파일: OpUser.cs 프로젝트: nandub/DeOps
        public static UserInfo Decode(G2Header root)
        {
            UserInfo user = new UserInfo();

            if (G2Protocol.ReadPayload(root))
            {
                user.Key = Utilities.ExtractBytes(root.Data, root.PayloadPos, root.PayloadSize);
                user.ID  = Utilities.KeytoID(user.Key);
            }

            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_Name:
                    user.Name = UTF8Encoding.UTF8.GetString(child.Data, child.PayloadPos, child.PayloadSize);
                    break;
                }
            }

            return(user);
        }
예제 #5
0
파일: PacketsNet.cs 프로젝트: nandub/DeOps
        public static Ping Decode(G2ReceivedPacket packet)
        {
            Ping pi = new Ping();

            if (G2Protocol.ReadPayload(packet.Root))
            {
                pi.Ident = BitConverter.ToUInt16(packet.Root.Data, packet.Root.PayloadPos);
            }

            G2Protocol.ResetPacket(packet.Root);

            G2Header child = new G2Header(packet.Root.Data);

            while (G2Protocol.ReadNextChild(packet.Root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_Source:
                    pi.Source = DhtSource.ReadPacket(child);
                    break;

                case Packet_RemoteIP:
                    pi.RemoteIP = new IPAddress(Utilities.ExtractBytes(child.Data, child.PayloadPos, child.PayloadSize));
                    break;
                }
            }

            return(pi);
        }
예제 #6
0
파일: PacketsNet.cs 프로젝트: nandub/DeOps
        public static DhtSource ReadPacket(G2Header root)
        {
            // read payload
            DhtSource source = new DhtSource();

            source.UserID   = BitConverter.ToUInt64(root.Data, root.PayloadPos);
            source.ClientID = BitConverter.ToUInt16(root.Data, root.PayloadPos + 8);
            source.TcpPort  = BitConverter.ToUInt16(root.Data, root.PayloadPos + 10);
            source.UdpPort  = BitConverter.ToUInt16(root.Data, root.PayloadPos + 12);
            source.Firewall = (FirewallType)root.Data[root.PayloadPos + 14];

            // read packets
            G2Protocol.ResetPacket(root);

            return(source);
        }
예제 #7
0
파일: ChatPackets.cs 프로젝트: nandub/DeOps
        public static ChatWho Decode(G2Header root)
        {
            ChatWho who = new ChatWho();

            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_Request:
                    who.Request = BitConverter.ToBoolean(child.Data, child.PayloadPos);
                    break;

                case Packet_RoomID:
                    who.RoomID = BitConverter.ToUInt64(child.Data, child.PayloadPos);
                    break;

                case Packet_Members:
                    if (child.PayloadSize % 8 == 0)
                    {
                        int offset = 0;

                        while (offset < child.PayloadSize)
                        {
                            UInt64 id = BitConverter.ToUInt64(child.Data, child.PayloadPos + offset);
                            who.Members.Add(id);

                            offset += 8;
                        }
                    }
                    break;
                }
            }

            return(who);
        }
예제 #8
0
        public static TunnelPacket Decode(G2Header root)
        {
            TunnelPacket tunnel = new TunnelPacket();

            if (G2Protocol.ReadPayload(root))
            {
                tunnel.Payload = Utilities.ExtractBytes(root.Data, root.PayloadPos, root.PayloadSize);
            }

            G2Protocol.ResetPacket(root);


            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_Source:
                    tunnel.Source = TunnelAddress.FromBytes(child.Data, child.PayloadPos);
                    break;

                case Packet_Target:
                    tunnel.Target = TunnelAddress.FromBytes(child.Data, child.PayloadPos);
                    break;

                case Packet_SourceServer:
                    tunnel.SourceServer = DhtAddress.ReadPacket(child);
                    break;

                case Packet_TargetServer:
                    tunnel.TargetServer = DhtAddress.ReadPacket(child);
                    break;
                }
            }

            return(tunnel);
        }
예제 #9
0
파일: PacketsNet.cs 프로젝트: nandub/DeOps
        public static NetworkPacket Decode(G2Header root)
        {
            NetworkPacket gn = new NetworkPacket();

            if (G2Protocol.ReadPayload(root))
            {
                gn.InternalData = Utilities.ExtractBytes(root.Data, root.PayloadPos, root.PayloadSize);
            }

            G2Protocol.ResetPacket(root);


            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_SourceID:
                    gn.SourceID = BitConverter.ToUInt64(child.Data, child.PayloadPos);
                    break;

                case Packet_ClientID:
                    gn.ClientID = BitConverter.ToUInt16(child.Data, child.PayloadPos);
                    break;

                case Packet_To:
                    gn.ToAddress = DhtAddress.ReadPacket(child);
                    break;

                case Packet_From:
                    gn.FromAddress = DhtAddress.ReadPacket(child);
                    break;
                }
            }

            return(gn);
        }
예제 #10
0
        public static OpBuddy Decode(G2Header root)
        {
            OpBuddy buddy = new OpBuddy();

            if (G2Protocol.ReadPayload(root))
            {
                buddy.Key = Utilities.ExtractBytes(root.Data, root.PayloadPos, root.PayloadSize);
                buddy.ID  = Utilities.KeytoID(buddy.Key);
            }

            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (child.Name == Packet_Ignored)
                {
                    buddy.Ignored = true;
                    continue;
                }

                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_Name:
                    buddy.Name = UTF8Encoding.UTF8.GetString(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_Group:
                    buddy.Group = UTF8Encoding.UTF8.GetString(child.Data, child.PayloadPos, child.PayloadSize);
                    break;
                }
            }

            return(buddy);
        }
예제 #11
0
파일: ChatPackets.cs 프로젝트: nandub/DeOps
        public static ChatText Decode(G2Header root)
        {
            ChatText chat = new ChatText();

            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_ID:
                    chat.ProjectID = BitConverter.ToUInt32(child.Data, child.PayloadPos);
                    break;

                case Packet_Kind:
                    chat.Kind = (RoomKind)BitConverter.ToUInt32(child.Data, child.PayloadPos);
                    break;

                case Packet_Text:
                    chat.Text = UTF8Encoding.UTF8.GetString(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_Format:
                    chat.Format = (TextFormat)CompactNum.ToInt32(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_RoomID:
                    chat.RoomID = BitConverter.ToUInt64(child.Data, child.PayloadPos);
                    break;
                }
            }

            return(chat);
        }
예제 #12
0
파일: DhtBucket.cs 프로젝트: nandub/DeOps
        public static new DhtContact ReadPacket(G2Header root)
        {
            // read payload
            DhtContact contact = new DhtContact();

            contact.UserID   = BitConverter.ToUInt64(root.Data, root.PayloadPos);
            contact.ClientID = BitConverter.ToUInt16(root.Data, root.PayloadPos + 8);
            contact.UdpPort  = BitConverter.ToUInt16(root.Data, root.PayloadPos + 10);
            contact.TcpPort  = BitConverter.ToUInt16(root.Data, root.PayloadPos + 12);

            // read packets
            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_IP:
                    contact.IP = new IPAddress(Utilities.ExtractBytes(child.Data, child.PayloadPos, child.PayloadSize));
                    break;

                case Packet_Server:
                    contact.TunnelServer = DhtAddress.ReadPacket(child);
                    break;

                case Packet_Client:
                    contact.TunnelClient = TunnelAddress.FromBytes(child.Data, child.PayloadPos);
                    break;
                }
            }

            return(contact);
        }
예제 #13
0
        public static TransferData Decode(G2Header root)
        {
            TransferData td = new TransferData();

            if (G2Protocol.ReadPayload(root))
            {
                td.Block = Utilities.ExtractBytes(root.Data, root.PayloadPos, root.PayloadSize);
            }

            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_FileID:
                    td.FileID = BitConverter.ToUInt64(child.Data, child.PayloadPos);
                    break;

                case Packet_StartByte:
                    td.StartByte = CompactNum.ToInt64(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_Index:
                    td.Index = CompactNum.ToInt32(child.Data, child.PayloadPos, child.PayloadSize);
                    break;
                }
            }

            return(td);
        }
예제 #14
0
파일: ChatPackets.cs 프로젝트: nandub/DeOps
        public static ChatInvite Decode(G2Header root)
        {
            ChatInvite invite = new ChatInvite();

            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_RoomID:
                    invite.RoomID = BitConverter.ToUInt64(child.Data, child.PayloadPos);
                    break;

                case Packet_Title:
                    invite.Title = UTF8Encoding.UTF8.GetString(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_Host:
                    invite.Host = Utilities.ExtractBytes(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_SignedInvite:
                    invite.SignedInvite = Utilities.ExtractBytes(child.Data, child.PayloadPos, child.PayloadSize);
                    break;
                }
            }

            return(invite);
        }
예제 #15
0
파일: ChatPackets.cs 프로젝트: nandub/DeOps
        public static ChatStatus Decode(G2Header root)
        {
            ChatStatus status = new ChatStatus();

            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_Active:
                    if (child.PayloadSize % 8 == 0)
                    {
                        int offset = 0;

                        while (offset < child.PayloadSize)
                        {
                            UInt64 id = BitConverter.ToUInt64(child.Data, child.PayloadPos + offset);
                            status.ActiveRooms.Add(id);

                            offset += 8;
                        }
                    }
                    break;
                }
            }

            return(status);
        }
예제 #16
0
        public static LocationNotify Decode(G2Header root)
        {
            LocationNotify notify = new LocationNotify();

            if (G2Protocol.ReadPayload(root))
            {
                notify.SignedLocation = Utilities.ExtractBytes(root.Data, root.PayloadPos, root.PayloadSize);
            }

            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (child.Name == Packet_GoingOffline)
                {
                    notify.GoingOffline = true;
                    continue;
                }

                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_Timeout:
                    notify.Timeout = CompactNum.ToInt32(child.Data, child.PayloadPos, child.PayloadSize);
                    break;
                }
            }

            return(notify);
        }
예제 #17
0
        public static UpdateInfo Decode(G2Header root)
        {
            // embedded public key of source we allow updates from
            RSACryptoServiceProvider UpdateSourcePublicKey = new RSACryptoServiceProvider();
            //UpdateSourcePublicKey.FromXmlString("<RSAKeyValue><Modulus>pTmHLSxyM9TDOM4tZzI5dld9JvPsHlHC/M5i0+Qtjid1DiefGAVubPToEhK9Im4Ohy37h5Ax6J3vt2pxLG4rnIDuKBJt70YH6W6XrJewQ6tid5BvVnNEzPUOIJHGMpOnyi0VjPpzZzWgp4JK6Yuh6LtsYwCyqIIJIBt9iQ/9XN0=</Modulus><Exponent>AQAB</Exponent></RSAKeyValue>");


            UpdateInfo info = new UpdateInfo();

            if (G2Protocol.ReadPayload(root))
            {
                info.Embedded = Utilities.ExtractBytes(root.Data, root.PayloadPos, root.PayloadSize);
            }

            G2Protocol.ResetPacket(root);

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (G2Protocol.ReadPayload(child))
                {
                    if (child.Name == Packet_Signature)
                    {
                        info.Signature = Utilities.ExtractBytes(child.Data, child.PayloadPos, child.PayloadSize);
                    }
                }
            }


            // verify signature
            byte[] pubKey = UpdateSourcePublicKey.ExportParameters(false).Modulus;
            if (!Utilities.CheckSignedData(pubKey, info.Embedded, info.Signature))
            {
                return(null);
            }


            root = new G2Header(info.Embedded);
            if (!G2Protocol.ReadPacket(root))
            {
                return(null);
            }

            child = new G2Header(info.Embedded);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_Name:
                    info.Name = UTF8Encoding.UTF8.GetString(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_Key:
                    info.Key = Utilities.ExtractBytes(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_Size:
                    info.Size = CompactNum.ToInt64(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_Hash:
                    info.Hash = Utilities.ExtractBytes(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_Notes:
                    info.Notes = UTF8Encoding.UTF8.GetString(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_Beginning:
                    info.Beginning = Utilities.ExtractBytes(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_DottedVersion:
                    info.DottedVersion = UTF8Encoding.UTF8.GetString(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_SequentialVersion:
                    info.SequentialVersion = CompactNum.ToUInt32(child.Data, child.PayloadPos, child.PayloadSize);
                    break;
                }
            }

            info.TempName = Utilities.ToBase64String(info.Hash);

            return(info);
        }
예제 #18
0
파일: PacketsForm.cs 프로젝트: nandub/DeOps
        private void ListViewPackets_Click(object sender, System.EventArgs e)
        {
            if (ListViewPackets.SelectedItems.Count == 0)
            {
                return;
            }

            PacketListViewItem selected = (PacketListViewItem)ListViewPackets.SelectedItems[0];

            // build tree
            TreeViewPacket.Nodes.Clear();

            G2Header root = new G2Header(selected.LogEntry.Data);

            if (G2Protocol.ReadPacket(root))
            {
                if (selected.LogEntry.Protocol == TransportProtocol.Rudp)
                {
                    string   name     = root.Name.ToString() + " : " + GetVariableName(typeof(CommPacket), root.Name);
                    TreeNode rootNode = TreeViewPacket.Nodes.Add(name);

                    if (G2Protocol.ReadPayload(root))
                    {
                        rootNode.Nodes.Add(new DataNode(root.Data, root.PayloadPos, root.PayloadSize));
                    }

                    G2Protocol.ResetPacket(root);

                    // get type
                    Type packetType = null;
                    switch (root.Name)
                    {
                    case CommPacket.SessionRequest:
                        packetType = typeof(SessionRequest);
                        break;

                    case CommPacket.SessionAck:
                        packetType = typeof(SessionAck);
                        break;

                    case CommPacket.KeyRequest:
                        packetType = typeof(KeyRequest);
                        break;

                    case CommPacket.KeyAck:
                        packetType = typeof(KeyAck);
                        break;

                    case CommPacket.Data:
                        packetType = typeof(CommData);
                        break;

                    case CommPacket.Close:
                        packetType = typeof(CommClose);
                        break;
                    }

                    ReadChildren(root, rootNode, packetType);
                }
                else
                {
                    string   name     = root.Name.ToString() + " : " + GetVariableName(typeof(RootPacket), root.Name);
                    TreeNode rootNode = TreeViewPacket.Nodes.Add(name);

                    DataNode payloadNode = null;
                    if (G2Protocol.ReadPayload(root))
                    {
                        payloadNode = new DataNode(root.Data, root.PayloadPos, root.PayloadSize);
                        rootNode.Nodes.Add(payloadNode);
                    }
                    G2Protocol.ResetPacket(root);

                    if (root.Name == RootPacket.Comm)
                    {
                        ReadChildren(root, rootNode, typeof(RudpPacket));
                    }

                    if (root.Name == RootPacket.Tunnel)
                    {
                        ReadChildren(root, rootNode, typeof(RudpPacket));
                    }

                    if (root.Name == RootPacket.Network)
                    {
                        ReadChildren(root, rootNode, typeof(NetworkPacket));

                        G2Header payloadRoot = new G2Header(payloadNode.Data);
                        if (payloadNode.Data != null && G2Protocol.ReadPacket(payloadRoot))
                        {
                            name = payloadRoot.Name.ToString() + " : " + GetVariableName(typeof(NetworkPacket), payloadRoot.Name);
                            TreeNode netNode = payloadNode.Nodes.Add(name);

                            if (G2Protocol.ReadPayload(payloadRoot))
                            {
                                netNode.Nodes.Add(new DataNode(payloadRoot.Data, payloadRoot.PayloadPos, payloadRoot.PayloadSize));
                            }
                            G2Protocol.ResetPacket(payloadRoot);

                            Type packetType = null;
                            switch (payloadRoot.Name)
                            {
                            case NetworkPacket.SearchRequest:
                                packetType = typeof(SearchReq);
                                break;

                            case NetworkPacket.SearchAck:
                                packetType = typeof(SearchAck);
                                break;

                            case NetworkPacket.StoreRequest:
                                packetType = typeof(StoreReq);
                                break;

                            case NetworkPacket.Ping:
                                packetType = typeof(Ping);
                                break;

                            case NetworkPacket.Pong:
                                packetType = typeof(Pong);
                                break;

                            case NetworkPacket.Bye:
                                packetType = typeof(Bye);
                                break;

                            case NetworkPacket.ProxyRequest:
                                packetType = typeof(ProxyReq);
                                break;

                            case NetworkPacket.ProxyAck:
                                packetType = typeof(ProxyAck);
                                break;

                            case NetworkPacket.CrawlRequest:
                                packetType = typeof(CrawlRequest);
                                break;

                            case NetworkPacket.CrawlAck:
                                packetType = typeof(CrawlAck);
                                break;
                            }


                            ReadChildren(payloadRoot, netNode, packetType);
                        }
                    }
                }
            }



            /*G2Header rootPacket = new G2Header(selected.LogEntry.Data);
             *
             * int start = 0;
             * int size  = selected.LogEntry.Data.Length;
             * if(G2ReadResult.PACKET_GOOD == Protocol.ReadNextPacket(rootPacket, ref start, ref size) )
             * {
             *      TreeNode rootNode = TreeViewPacket.Nodes.Add( TrimName(rootPacket.Name.ToString()) );
             *
             *      if(G2Protocol.ReadPayload(rootPacket))
             *      {
             *              //rootNode.Nodes.Add( Utilities.BytestoAscii(rootPacket.Data, rootPacket.PayloadPos, rootPacket.PayloadSize));
             *              rootNode.Nodes.Add( Utilities.BytestoHex(rootPacket.Data, rootPacket.PayloadPos, rootPacket.PayloadSize, true));
             *      }
             *
             *      G2Protocol.ResetPacket(rootPacket);
             *
             *      ReadChildren(rootPacket, rootNode, null);
             * }*/

            TreeViewPacket.ExpandAll();
        }
예제 #19
0
파일: PacketsComm.cs 프로젝트: nandub/DeOps
        public static RudpPacket Decode(G2Header root)
        {
            RudpPacket gc = new RudpPacket();

            if (G2Protocol.ReadPayload(root))
            {
                gc.Payload = Utilities.ExtractBytes(root.Data, root.PayloadPos, root.PayloadSize);
            }

            G2Protocol.ResetPacket(root);


            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_SenderDht:
                    gc.SenderID = BitConverter.ToUInt64(child.Data, child.PayloadPos);
                    break;

                case Packet_SenderClient:
                    gc.SenderClient = BitConverter.ToUInt16(child.Data, child.PayloadPos);
                    break;

                case Packet_TargetDht:
                    gc.TargetID = BitConverter.ToUInt64(child.Data, child.PayloadPos);
                    break;

                case Packet_TargetClient:
                    gc.TargetClient = BitConverter.ToUInt16(child.Data, child.PayloadPos);
                    break;

                case Packet_Type:
                    gc.PacketType = child.Data[child.PayloadPos];
                    break;

                case Packet_ID:
                    gc.PeerID = BitConverter.ToUInt16(child.Data, child.PayloadPos);
                    break;

                case Packet_Seq:
                    gc.Sequence = (byte)child.Data[child.PayloadPos];
                    break;

                case Packet_Ident:
                    gc.Ident = BitConverter.ToUInt32(child.Data, child.PayloadPos);
                    break;

                case Packet_To:
                    gc.ToAddress = DhtAddress.ReadPacket(child);
                    break;

                case Packet_Proxy:
                    gc.RemoteProxy = DhtAddress.ReadPacket(child);
                    break;
                }
            }

            return(gc);
        }
예제 #20
0
        public static TransferPong Decode(G2Header root)
        {
            TransferPong pong = new TransferPong();

            G2Header child = new G2Header(root.Data);

            while (G2Protocol.ReadNextChild(root, child) == G2ReadResult.PACKET_GOOD)
            {
                if (child.Name == Packet_Error)
                {
                    pong.Error = true;
                }

                if (!G2Protocol.ReadPayload(child))
                {
                    continue;
                }

                switch (child.Name)
                {
                case Packet_FileID:
                    pong.FileID = BitConverter.ToUInt64(child.Data, child.PayloadPos);
                    break;

                case Packet_Timeout:
                    pong.Timeout = CompactNum.ToInt32(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_Status:
                    pong.Status = (TransferStatus)CompactNum.ToInt32(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_InternalSize:
                    pong.InternalSize = CompactNum.ToInt64(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_ChunkSize:
                    pong.ChunkSize = CompactNum.ToInt32(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_BitCount:
                    pong.BitCount = CompactNum.ToInt32(child.Data, child.PayloadPos, child.PayloadSize);
                    break;

                case Packet_AltClient:
                    DhtClient client = DhtClient.FromBytes(child.Data, child.PayloadPos);
                    pong.Alts[client] = new List <DhtAddress>();

                    G2Protocol.ResetPacket(child);

                    G2Header sub = new G2Header(child.Data);

                    while (G2Protocol.ReadNextChild(child, sub) == G2ReadResult.PACKET_GOOD)
                    {
                        if (G2Protocol.ReadPayload(sub))
                        {
                            if (sub.Name == Packet_AltAddress)
                            {
                                pong.Alts[client].Add(DhtAddress.ReadPacket(sub));
                            }
                        }
                    }

                    break;
                }
            }

            return(pong);
        }