void LoadColumnTwo(object state = null)
{
ColumnTwo.CloseAndRemoveAllChildren();
double buildHeight = ActiveSliceSettings.Instance.BuildHeight;
#if NEW_TWO_COLUMN_MODE
PartPreviewContent partViewContent = new PartPreviewContent(PrinterConnectionAndCommunication.Instance.ActivePrintItem, true, View3DWidget.AutoRotate.Enabled, false);
partViewContent.AnchorAll();
ColumnTwo.AddChild(partViewContent);
#else
part3DView = new View3DWidget(PrinterConnectionAndCommunication.Instance.ActivePrintItem,
new Vector3(ActiveSliceSettings.Instance.BedSize, buildHeight),
ActiveSliceSettings.Instance.BedCenter,
ActiveSliceSettings.Instance.BedShape,
View3DWidget.WindowType.Embeded,
View3DWidget.AutoRotate.Enabled);
part3DView.Margin = new BorderDouble(bottom: 4);
part3DView.AnchorAll();
partGcodeView = new ViewGcodeBasic(PrinterConnectionAndCommunication.Instance.ActivePrintItem,
new Vector3(ActiveSliceSettings.Instance.BedSize, buildHeight),
ActiveSliceSettings.Instance.BedCenter,
ActiveSliceSettings.Instance.BedShape,
false);
partGcodeView.AnchorAll();
ColumnTwo.AddChild(part3DView);
ColumnTwo.AddChild(partGcodeView);
#endif
ColumnTwo.AnchorAll();
}
public void SetBreadCrumbs(object sender, EventArgs e)
{
breadCrumbDisplayHolder.CloseAndRemoveAllChildren();
LibraryProvider currentProvider = LibraryDataView.CurrentLibraryProvider;
bool first = true;
while (currentProvider != null)
{
if (!first)
{
GuiWidget separator = new TextWidget(">", textColor: ActiveTheme.Instance.PrimaryTextColor);
separator.VAnchor = VAnchor.ParentCenter;
separator.Margin = new BorderDouble(3, 0);
breadCrumbDisplayHolder.AddChild(separator);
}
Button installUpdateLink = textImageButtonFactory.Generate(currentProvider.Name);
LibraryProvider localCurrentProvider = currentProvider;
installUpdateLink.Click += (sender2, e2) =>
{
UiThread.RunOnIdle(() => {
LibraryDataView.CurrentLibraryProvider = localCurrentProvider;
libraryDataView.RebuildView();
});
};
breadCrumbDisplayHolder.AddChild(installUpdateLink);
first = false;
currentProvider = currentProvider.ParentLibraryProvider;
}
libraryDataView.ClearSelectedItems();
}
void LoadColumnThree(object state = null)
{
ColumnThree.CloseAndRemoveAllChildren();
ThirdPanelTabView thirdPanelTabView = new ThirdPanelTabView();
thirdPanelTabView.Name = "For - WideScreenPanel {0}".FormatWith(ColumnThreeCount++);
ColumnThree.AddChild(thirdPanelTabView);
ColumnThree.Width = ColumnTheeFixedWidth; //Ordering here matters - must go after children are added
}
private void LoadColumnTwo()
{
ColumnTwo.CloseAndRemoveAllChildren();
PartPreviewContent partViewContent = new PartPreviewContent(PrinterConnectionAndCommunication.Instance.ActivePrintItem, View3DWidget.WindowMode.Embeded, View3DWidget.AutoRotate.Enabled);
partViewContent.AnchorAll();
ColumnTwo.AddChild(partViewContent);
ColumnTwo.AnchorAll();
}
private void AddDisplayControls(FlowLayoutWidget buttonPanel)
{
buttonPanel.CloseAndRemoveAllChildren();
double oldWidth = textImageButtonFactory.FixedWidth;
textImageButtonFactory.FixedWidth = 44;
FlowLayoutWidget layerInfoContainer = new FlowLayoutWidget(FlowDirection.TopToBottom);
layerInfoContainer.HAnchor = HAnchor.ParentLeftRight;
layerInfoContainer.Padding = new BorderDouble(5);
// put in a show grid check box
{
CheckBox showGrid = new CheckBox(LocalizedString.Get("Grid"), textColor: ActiveTheme.Instance.PrimaryTextColor);
showGrid.Checked = gcodeViewWidget.RenderGrid;
meshViewerWidget.RenderBed = showGrid.Checked;
showGrid.CheckedStateChanged += (sender, e) =>
{
gcodeViewWidget.RenderGrid = showGrid.Checked;
meshViewerWidget.RenderBed = showGrid.Checked;
};
layerInfoContainer.AddChild(showGrid);
}
// put in a show moves checkbox
{
CheckBox showMoves = new CheckBox(LocalizedString.Get("Moves"), textColor: ActiveTheme.Instance.PrimaryTextColor);
showMoves.Checked = gcodeViewWidget.RenderMoves;
showMoves.CheckedStateChanged += (sender, e) =>
{
gcodeViewWidget.RenderMoves = showMoves.Checked;
};
layerInfoContainer.AddChild(showMoves);
}
// put in a show Retractions checkbox
{
CheckBox showRetractions = new CheckBox(LocalizedString.Get("Retractions"), textColor: ActiveTheme.Instance.PrimaryTextColor);
showRetractions.Checked = gcodeViewWidget.RenderRetractions;
showRetractions.CheckedStateChanged += (sender, e) =>
{
gcodeViewWidget.RenderRetractions = showRetractions.Checked;
};
layerInfoContainer.AddChild(showRetractions);
}
// put in a show speed checkbox
{
CheckBox showSpeeds = new CheckBox(LocalizedString.Get("Speeds"), textColor: ActiveTheme.Instance.PrimaryTextColor);
showSpeeds.Checked = gcodeViewWidget.RenderSpeeds;
showSpeeds.CheckedStateChanged += (sender, e) =>
{
gcodeViewWidget.RenderSpeeds = showSpeeds.Checked;
};
layerInfoContainer.AddChild(showSpeeds);
}
// put in a simulate extrusion checkbox
{
CheckBox simulateExtrusion = new CheckBox(LocalizedString.Get("Extrusion"), textColor: ActiveTheme.Instance.PrimaryTextColor);
simulateExtrusion.Checked = gcodeViewWidget.SimulateExtrusion;
simulateExtrusion.CheckedStateChanged += (sender, e) =>
{
gcodeViewWidget.SimulateExtrusion = simulateExtrusion.Checked;
};
layerInfoContainer.AddChild(simulateExtrusion);
}
// put in a simulate extrusion checkbox
if (ActiveSliceSettings.Instance.ExtruderCount > 1)
{
CheckBox hideExtruderOffsets = new CheckBox("Hide Offsets", textColor: ActiveTheme.Instance.PrimaryTextColor);
hideExtruderOffsets.Checked = gcodeViewWidget.HideExtruderOffsets;
hideExtruderOffsets.CheckedStateChanged += (sender, e) =>
{
gcodeViewWidget.HideExtruderOffsets = hideExtruderOffsets.Checked;
};
layerInfoContainer.AddChild(hideExtruderOffsets);
}
// put in a show 3D view checkbox
{
viewControlsToggle.twoDimensionButton.CheckedStateChanged += (sender, e) =>
{
SetLayerViewType();
};
viewControlsToggle.threeDimensionButton.CheckedStateChanged += (sender, e) =>
{
SetLayerViewType();
};
SetLayerViewType();
}
// Put in the sync to print checkbox
if (!widgetHasCloseButton)
{
syncToPrint = new CheckBox("Sync To Print".Localize(), textColor: ActiveTheme.Instance.PrimaryTextColor);
syncToPrint.Checked = (UserSettings.Instance.get("LayerViewSyncToPrint") == "True");
syncToPrint.CheckedStateChanged += (sender, e) =>
{
UserSettings.Instance.set("LayerViewSyncToPrint", syncToPrint.Checked.ToString());
SetSyncToPrintVisibility();
};
layerInfoContainer.AddChild(syncToPrint);
// The idea here is we just got asked to rebuild the window (and it is being created now)
// because the gcode finished creating for the print that is printing.
// We don't want to be notified if any other updates happen to this gcode while it is printing.
if (PrinterConnectionAndCommunication.Instance.PrinterIsPrinting &&
PrinterConnectionAndCommunication.Instance.ActivePrintItem == printItem)
{
printItem.SlicingOutputMessage.UnregisterEvent(sliceItem_SlicingOutputMessage, ref unregisterEvents);
printItem.SlicingDone.UnregisterEvent(sliceItem_Done, ref unregisterEvents);
generateGCodeButton.Visible = false;
// However if the print finished or is canceled we are going to want to get updates again. So, hook the status event
PrinterConnectionAndCommunication.Instance.CommunicationStateChanged.RegisterEvent(HookUpGCodeMessagesWhenDonePrinting, ref unregisterEvents);
UiThread.RunOnIdle((state) =>
{
SetSyncToPrintVisibility();
});
}
}
//layerInfoContainer.AddChild(new CheckBox("Show Retractions", textColor: ActiveTheme.Instance.PrimaryTextColor));
buttonPanel.AddChild(layerInfoContainer);
textImageButtonFactory.FixedWidth = oldWidth;
}
private void AddModelInfo(FlowLayoutWidget buttonPanel)
{
buttonPanel.CloseAndRemoveAllChildren();
double oldWidth = textImageButtonFactory.FixedWidth;
textImageButtonFactory.FixedWidth = 44;
FlowLayoutWidget modelInfoContainer = new FlowLayoutWidget(FlowDirection.TopToBottom);
modelInfoContainer.HAnchor = HAnchor.ParentLeftRight;
modelInfoContainer.Padding = new BorderDouble(5);
string printTimeLabel = "Print Time".Localize().ToUpper();
string printTimeLabelFull = string.Format("{0}:", printTimeLabel);
// put in the print time
modelInfoContainer.AddChild(new TextWidget(printTimeLabelFull, textColor: ActiveTheme.Instance.PrimaryTextColor, pointSize: 10));
{
string timeRemainingText = "---";
if (gcodeViewWidget != null && gcodeViewWidget.LoadedGCode != null)
{
int secondsRemaining = (int)gcodeViewWidget.LoadedGCode.Instruction(0).secondsToEndFromHere;
int hoursRemaining = (int)(secondsRemaining / (60 * 60));
int minutesRemaining = (int)((secondsRemaining + 30) / 60 - hoursRemaining * 60); // +30 for rounding
secondsRemaining = secondsRemaining % 60;
if (hoursRemaining > 0)
{
timeRemainingText = string.Format("{0} h, {1} min", hoursRemaining, minutesRemaining);
}
else
{
timeRemainingText = string.Format("{0} min", minutesRemaining);
}
}
GuiWidget estimatedPrintTime = new TextWidget(string.Format("{0}", timeRemainingText), textColor: ActiveTheme.Instance.PrimaryTextColor, pointSize: 14);
//estimatedPrintTime.HAnchor = Agg.UI.HAnchor.ParentLeft;
estimatedPrintTime.Margin = new BorderDouble(0, 9, 0, 3);
modelInfoContainer.AddChild(estimatedPrintTime);
}
//modelInfoContainer.AddChild(new TextWidget("Size:", textColor: ActiveTheme.Instance.PrimaryTextColor));
string filamentLengthLabel = "Filament Length".Localize().ToUpper();
string filamentLengthLabelFull = string.Format("{0}:", filamentLengthLabel);
// show the filament used
modelInfoContainer.AddChild(new TextWidget(filamentLengthLabelFull, textColor: ActiveTheme.Instance.PrimaryTextColor, pointSize: 9));
{
double filamentUsed = gcodeViewWidget.LoadedGCode.GetFilamentUsedMm(ActiveSliceSettings.Instance.NozzleDiameter);
GuiWidget estimatedPrintTime = new TextWidget(string.Format("{0:0.0} mm", filamentUsed), pointSize: 14, textColor: ActiveTheme.Instance.PrimaryTextColor);
//estimatedPrintTime.HAnchor = Agg.UI.HAnchor.ParentLeft;
estimatedPrintTime.Margin = new BorderDouble(0, 9, 0, 3);
modelInfoContainer.AddChild(estimatedPrintTime);
}
string filamentVolumeLabel = "Filament Volume".Localize().ToUpper();
string filamentVolumeLabelFull = string.Format("{0}:", filamentVolumeLabel);
modelInfoContainer.AddChild(new TextWidget(filamentVolumeLabelFull, textColor: ActiveTheme.Instance.PrimaryTextColor, pointSize: 9));
{
double filamentMm3 = gcodeViewWidget.LoadedGCode.GetFilamentCubicMm(ActiveSliceSettings.Instance.FilamentDiameter);
GuiWidget estimatedPrintTime = new TextWidget(string.Format("{0:0.00} cm3", filamentMm3 / 1000), pointSize: 14, textColor: ActiveTheme.Instance.PrimaryTextColor);
//estimatedPrintTime.HAnchor = Agg.UI.HAnchor.ParentLeft;
estimatedPrintTime.Margin = new BorderDouble(0, 9, 0, 3);
modelInfoContainer.AddChild(estimatedPrintTime);
}
string weightLabel = "Est. Weight".Localize().ToUpper();
string weightLabelFull = string.Format("{0}:", weightLabel);
modelInfoContainer.AddChild(new TextWidget(weightLabelFull, pointSize: 9, textColor: ActiveTheme.Instance.PrimaryTextColor));
{
var density = 1.0;
string filamentType = "PLA";
if (filamentType == "ABS")
{
density = 1.04;
}
else if (filamentType == "PLA")
{
density = 1.24;
}
double filamentWeightGrams = gcodeViewWidget.LoadedGCode.GetFilamentWeightGrams(ActiveSliceSettings.Instance.FilamentDiameter, density);
GuiWidget estimatedPrintTime = new TextWidget(string.Format("{0:0.00} g", filamentWeightGrams), pointSize: 14, textColor: ActiveTheme.Instance.PrimaryTextColor);
//estimatedPrintTime.HAnchor = Agg.UI.HAnchor.ParentLeft;
estimatedPrintTime.Margin = new BorderDouble(0, 9, 0, 3);
modelInfoContainer.AddChild(estimatedPrintTime);
}
//modelInfoContainer.AddChild(new TextWidget("Layer Count:", textColor: ActiveTheme.Instance.PrimaryTextColor));
buttonPanel.AddChild(modelInfoContainer);
textImageButtonFactory.FixedWidth = oldWidth;
}