public FailureProcessingResult ProcessFailures(FailuresAccessor data)
{
if (isDoorFail)
{
isDoorFail = false;
return(FailureProcessingResult.ProceedWithRollBack);
}
else
{
IList <FailureResolutionType> resolutionTypeList = new List <FailureResolutionType>();
IList <FailureMessageAccessor> failList = new List <FailureMessageAccessor>();
// Inside event handler, get all warnings
failList = data.GetFailureMessages();
foreach (FailureMessageAccessor failure in failList)
{
FailureDefinitionId failId = failure.GetFailureDefinitionId();
string failureMessage = failure.GetDescriptionText();
FailureSeverity severity = failure.GetSeverity();
resolutionTypeList = data.GetAttemptedResolutionTypes(failure);
foreach (ElementId id in failure.GetFailingElementIds())
{
int elementId = id.IntegerValue;
}
}
return(FailureProcessingResult.Continue);
}
}
private void OnFailuresProcessing(object sender, FailuresProcessingEventArgs e)
{
FailuresAccessor failuresAccessor = e.GetFailuresAccessor();
string transactionName = failuresAccessor.GetTransactionName();
IList <FailureMessageAccessor> fmas = failuresAccessor.GetFailureMessages();
if (fmas.Count == 0)
{
e.SetProcessingResult(FailureProcessingResult.Continue);
return;
}
else
{
foreach (FailureMessageAccessor fma in fmas)
{
FailureSeverity severity = fma.GetSeverity();
try
{
if (severity == FailureSeverity.Warning)
{
failuresAccessor.DeleteWarning(fma);
e.SetProcessingResult(FailureProcessingResult.Continue);
}
else
{
e.SetProcessingResult(FailureProcessingResult.ProceedWithRollBack);
}
}
catch { }
}
}
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
IList <FailureMessageAccessor> failureMessages = failuresAccessor.GetFailureMessages();
foreach (FailureMessageAccessor failureMessageAccessor in failureMessages)
{
FailureDefinitionId id = failureMessageAccessor.GetFailureDefinitionId();
try {
ErrorMessage = failureMessageAccessor.GetDescriptionText();
}
catch {
ErrorMessage = "Unknown Error";
}
try {
FailureSeverity failureSeverity = failureMessageAccessor.GetSeverity();
ErrorSeverity = failureSeverity.ToString();
// delete all of the warning level failures and roll back any others
if (failureSeverity == FailureSeverity.Warning)
{
failuresAccessor.DeleteWarning(failureMessageAccessor);
}
else
{
return(FailureProcessingResult.ProceedWithRollBack);
}
}
catch { }
}
return(FailureProcessingResult.Continue);
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
// inside event handler, get all warnings
IList <FailureMessageAccessor> fmas = failuresAccessor.GetFailureMessages();
if (fmas.Count == 0)
{
return(FailureProcessingResult.Continue);
}
foreach (FailureMessageAccessor fma in fmas)
{
FailureSeverity s = fma.GetSeverity();
if (s == FailureSeverity.Warning)
{
failuresAccessor.DeleteWarning(fma);
}
else if (s == FailureSeverity.Error)
{
//FailureDefinitionId id = fma.GetFailureDefinitionId();
//if (id == BuiltInFailures.JoinElementsFailures.)
//{
// only default option being choosen,
// not good enough!
//failuresAccessor.ResolveFailure(fma);
//}
//return FailureProcessingResult.ProceedWithRollBack;
}
/*
* switch (s)
* {
* // Slightly off axis error gets ignored
* case "Element is slightly off axis and may cause inaccuracies.":
*
* break;
*
* case "Beam or Brace is slightly off axis and may cause inaccuracies.":
* break;
*
* default:
*
* //GlobalVariables.WarningList.Add(new WarningEntry(a.GetTransactionName(), f.GetDescriptionText(), f.GetFailingElementIds()));
* break;
* }
* a.DeleteWarning(f);
*/
}
return(FailureProcessingResult.Continue);
}
public FailureProcessingResult PreprocessFailures(
FailuresAccessor a)
{
IList <FailureMessageAccessor> failures
= a.GetFailureMessages();
foreach (FailureMessageAccessor f in failures)
{
FailureSeverity fseverity = a.GetSeverity();
if (fseverity == FailureSeverity.Warning)
{
a.DeleteWarning(f);
}
}
return(FailureProcessingResult.Continue);
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
IList <FailureMessageAccessor> failureMessages = failuresAccessor.GetFailureMessages();
//if (failureMessages.Count == 0) { return FailureProcessingResult.Continue; }
bool needRollBack = false;
string transactionName = failuresAccessor.GetTransactionName();
foreach (FailureMessageAccessor fma in failureMessages)
{
FailureMessageInfo messageInfo = new FailureMessageInfo();
try
{
messageInfo.ErrorMessage = fma.GetDescriptionText();
messageInfo.ErrorSeverity = fma.GetSeverity().ToString();
messageInfo.FailingElementIds = fma.GetFailingElementIds().ToList();
}
catch { messageInfo.ErrorMessage = "Unknown Error"; }
FailureSeverity severity = fma.GetSeverity();
try
{
if (severity == FailureSeverity.Warning)
{
failuresAccessor.DeleteWarning(fma);
}
else
{
messageInfo.ErrorSeverity = severity.ToString();
messageInfo.FailingElementIds = fma.GetFailingElementIds().ToList();
failureMessageInfoList.Add(messageInfo);
needRollBack = true;
}
}
catch { }
}
if (needRollBack)
{
return(FailureProcessingResult.ProceedWithRollBack);
}
else
{
return(FailureProcessingResult.Continue);
}
}
public FailureProcessingResult PreprocessFailures(
FailuresAccessor failuresAccessor)
{
IList <FailureResolutionType> resolutionTypeList = new List <FailureResolutionType>();
IList <FailureMessageAccessor> failureMessages = failuresAccessor.GetFailureMessages();
if (failureMessages.Count == 0)
{
return(FailureProcessingResult.Continue);
}
else
{
foreach (FailureMessageAccessor fma in failureMessages)
{
// check how many resolutions types were attempted to try to prevent
// entering infinite loop
/*
* resolutionTypeList = failuresAccessor.GetAttemptedResolutionTypes(fma);
* FailureDefinitionId failId = fma.GetFailureDefinitionId();
*
* string failureName = fma.ToString();
*
* if(resolutionTypeList.Count >= 3)
* {
* return FailureProcessingResult.ProceedWithRollBack;
* }
*/
FailureSeverity fsav = fma.GetSeverity();
if (fsav == FailureSeverity.Warning)
{
failuresAccessor.DeleteWarning(fma);
}
else
{
failuresAccessor.ResolveFailure(fma);
return(FailureProcessingResult.ProceedWithRollBack);
}
}
return(FailureProcessingResult.Continue);
}
}
FailureProcessingResult PreprocessFailures(FailuresAccessor a)
{
IList<FailureMessageAccessor> failures = a.GetFailureMessages();
foreach (FailureMessageAccessor f in failures)
{
FailureSeverity fseverity = a.GetSeverity();
if (fseverity == FailureSeverity.Warning)
{
a.DeleteWarning(f);
}
else
{
a.ResolveFailure(f);
return FailureProcessingResult.ProceedWithCommit;
}
}
return FailureProcessingResult.Continue;
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor a)
{
IList <FailureMessageAccessor> failures = a.GetFailureMessages();
foreach (FailureMessageAccessor f in failures)
{
FailureDefinitionId id = f.GetFailureDefinitionId();
FailureSeverity failureSeverity = a.GetSeverity();
if (failureSeverity == FailureSeverity.Warning)
{
a.DeleteWarning(f);
}
else
{
return(FailureProcessingResult.ProceedWithRollBack);
}
}
return(FailureProcessingResult.Continue);
}
FailureProcessingResult IFailuresPreprocessor.PreprocessFailures(FailuresAccessor failuresAccessor)
{
String transactionName = failuresAccessor.GetTransactionName();
IList <FailureMessageAccessor> fmas = failuresAccessor.GetFailureMessages();
if (fmas.Count == 0)
{
return(FailureProcessingResult.Continue);
}
foreach (FailureMessageAccessor fma in fmas)
{
FailureSeverity fseverity = fma.GetSeverity();
if (fseverity == FailureSeverity.Warning)
{
failuresAccessor.DeleteWarning(fma);
}
}
return(FailureProcessingResult.Continue);
}
//This is the primary method for gathering the Warning information from the Document
private void SetData(Document doc)
{
//Create a new List to hold the Warning Type names
List <string> warningType = new List <string>();
//Add the first item to the list so it can be controlled
warningType.Add("--NONE--");
//Check to see if the DataTable has had columns created not. If not (first time) then create olumns with the correct type of storage element
if (dtWarnings.Columns.Count == 0)
{
//This is a bit redundent because they are all "warnings" as "errors" can't be ignored, but if you use custom error handlers, this may be more useful
dtWarnings.Columns.Add(new DataColumn("Severity", typeof(FailureSeverity)));
dtWarnings.Columns.Add(new DataColumn("Description", typeof(string)));
dtWarnings.Columns.Add(new DataColumn("Element Ids", typeof(ICollection <ElementId>)));
dtWarnings.Columns.Add(new DataColumn("Name", typeof(string)));
dtWarnings.Columns.Add(new DataColumn("Creator", typeof(string)));
dtWarnings.Columns.Add(new DataColumn("Phase Created", typeof(string)));
dtWarnings.Columns.Add(new DataColumn("Phase Demo'd", typeof(string)));
}
//Use these two parameters in case it is not a workshared project
string elemName = "None";
string userId = "None";
//Loop through every warning in the document
foreach (FailureMessage warning in doc.GetWarnings())
{
//Use these two parameters when the elements cannot have a phase create / demolished
string pCreate = "";
string pDemo = "";
//Set Issue Description to a string variable
string description = warning.GetDescriptionText();
//Check to see if the Warning Type list already has this Warning Type in it, and add it if not
if (!warningType.Contains(description))
{
warningType.Add(description);
}
//Get all of the Element Ids of the elements associated with the warning
ICollection <ElementId> failingElements = warning.GetFailingElements();
//This is a bit redundent because they are all "warnings" as "errors" can't be ignored, but if you use custom error handlers, this may be more useful
FailureSeverity severity = warning.GetSeverity();
//Check to make sure there are Element Ids for the elements. Some warning types (MECH Systems) do not always provide Element Ids
if (failingElements.OfType <ElementId>().FirstOrDefault() is ElementId first)
{
//Get the First element of the warning elements in the Document
Element elem = doc.GetElement(first);
//Set the parameter to the actual name instead of "None" from above
elemName = elem.Name;
//Checks to see if the Element has any phases associated with it and sets the pCreate and pDemo variables previousy defined
if (elem.HasPhases())
{
if (elem.CreatedPhaseId != ElementId.InvalidElementId)
{
pCreate = doc.GetElement(elem.CreatedPhaseId).Name;
}
if (elem.DemolishedPhaseId != ElementId.InvalidElementId)
{
pDemo = doc.GetElement(elem.DemolishedPhaseId).Name;
}
}
//Checks to see if the Document has Worksharing enables and gets the User informaiton associated with the creation of the element for refernce
if (doc.IsWorkshared)
{
userId = WorksharingUtils.GetWorksharingTooltipInfo(doc, first).Creator;
}
}
//Add a reow to the DataTable with all of the informaiton for the warning
dtWarnings.Rows.Add(severity, description, failingElements, elemName, userId, pCreate, pDemo);
}
//Set the DataGridView's data source to the DataTable
dgWarnings.DataSource = dtWarnings;
//Change the AutoSize mode to fill the width of the DataGridView as it resizes
dgWarnings.Columns[0].AutoSizeMode = DataGridViewAutoSizeColumnMode.AllCells;
//Changes the text to include the number of Wanrings for reference to the User
dgWarnings.Columns[1].HeaderText = "Description (" + dtWarnings.Rows.Count.ToString() + ")";
dgWarnings.Columns[1].AutoSizeMode = DataGridViewAutoSizeColumnMode.Fill;
//Hides the column that contains the Element Ids to keep the DataGridView clean
dgWarnings.Columns[2].Visible = false;
dgWarnings.Columns[3].AutoSizeMode = DataGridViewAutoSizeColumnMode.AllCells;
dgWarnings.Columns[4].AutoSizeMode = DataGridViewAutoSizeColumnMode.AllCells;
dgWarnings.Columns[5].AutoSizeMode = DataGridViewAutoSizeColumnMode.AllCells;
dgWarnings.Columns[6].AutoSizeMode = DataGridViewAutoSizeColumnMode.AllCells;
//Set the DataGridView to sort based on the Description
dgWarnings.Sort(dgWarnings.Columns[1], System.ComponentModel.ListSortDirection.Ascending);
//Clears the auto selection of any rows in the DataGridivew so no elements are selected initially
dgWarnings.ClearSelection();
//Clears the Warning Type combo box of all items
cboWarningType.DataSource = null;
//Reset the Warning Type combo box with the List of warnings Types
cboWarningType.DataSource = warningType.ToList();
}
public FailureProcessingResult PreprocessFailures(FailuresAccessor failuresAccessor)
{
IList <FailureMessageAccessor> failureMessages = failuresAccessor.GetFailureMessages();
foreach (FailureMessageAccessor failureMessageAccessor in failureMessages)
{
// We're just deleting all of the warning level
// failures and rolling back any others
FailureDefinitionId id = failureMessageAccessor.GetFailureDefinitionId();
try
{
ErrorMessage = failureMessageAccessor.GetDescriptionText();
}
catch
{
ErrorMessage = "Unknown Error";
}
try
{
FailureSeverity failureSeverity = failureMessageAccessor.GetSeverity();
ErrorSeverity = failureSeverity.ToString();
if (failureSeverity == FailureSeverity.Warning)
{
// 如果是警告，则禁止消息框
failuresAccessor.DeleteWarning(failureMessageAccessor);
}
else
{
// 如果是错误：则取消导致错误的操作，但是仍然继续整个事务
return(FailureProcessingResult.ProceedWithRollBack);
}
}
catch
{
}
}
return(FailureProcessingResult.Continue);
}
